Searchhelp User Exit ??

Hi all
I want to know about the detail functionality & coding of User exit Specially Searchhelp User exit . Can anyone please explain it with a good example ??

Hello Vtest,
This is how u do...
In user exit EXIT_SAPMM06E_004.
data: begin of th_head occurs 0.
       include structure thead.
data: end of th_head.
data: begin of th_line occurs 0.
       include structure tline.
data: end of th_line..
clear: th_head, th_line.
refresh: th_head, th_line.
th_head-tdobject = 'EKKO'.
th_head-tdid = 'F14'.
th_head-tdspras = sy-langu       .
append th_head.
th_line = '*'.
th_line = 'this is first line'.
append th_line.
clear th_line.
th_line = '*'.
th_line = 'this is second line'.
append th_line.
CALL FUNCTION 'SAVE_TEXT'
   EXPORTING
   CLIENT                = SY-MANDT
     HEADER                = th_head
   INSERT                = ' '
   SAVEMODE_DIRECT       = ' '
   OWNER_SPECIFIED       = ' '
   LOCAL_CAT             = ' '
IMPORTING
   FUNCTION              =
   NEWHEADER             =
   TABLES
     LINES                 = th_line
EXCEPTIONS
   ID                    = 1
   LANGUAGE              = 2
   NAME                  = 3
   OBJECT                = 4
   OTHERS                = 5
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
this should work for you.

Similar Messages

How to implement F4IF_INT_TABLE_VALUE_REQUEST in search help User Exit?

Hi,
I need to enhanse search help and add F4 functionality to display list of company codes when cursor is in PBUKR field. I put F4IF_INT_TABLE_VALUE_REQUEST
into the user exit but nothing works.
I get error that PROCESS is not defined. If I remove that line there is no error but nothing works.
Can someone tell me what is wrong in the code below.
Thank you.
FUNCTION z_hr_shlp_wbs_element.
""Local interface:
*" TABLES
*"      SHLP_TAB TYPE SHLP_DESCR_TAB_T
*"      RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*"     VALUE(SHLP) TYPE SHLP_DESCR_T
*"     VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
TABLES: prps.
DATA: it_prps LIKE prps OCCURS 0 WITH HEADER LINE.
DATA: status_tab LIKE jstat OCCURS 0 WITH HEADER LINE.
DATA: l_posid LIKE prps-posid.
DATA: l_subrc LIKE sy-subrc.
DATA: l_pbukr LIKE prps-pbukr,   " Added by vr
        value TYPE DDSHIFACE-VALUE.
EXIT immediately, if you do not want to handle this step
IF callcontrol-step <> 'SELONE' AND
     callcontrol-step <> 'SELECT' AND
                                       " AND SO ON
     callcontrol-step <> 'DISP'.
    EXIT.
ENDIF.
------------------------------------------------------ added by vr
PROCESS ON VALUE-REQUEST.
FIELD PRPS-PBUKR MODULE PBUKR.
DATA: BEGIN OF VALUE_TAB OCCURS 0,
LPBUKR LIKE PRPS-PBUKR,
LPOSID LIKE PRPS-POSID,
END OF VALUE_TAB.
DATA: BEGIN OF RETURN_TAB OCCURS 0.
INCLUDE STRUCTURE DDSHRETVAL.
DATA END OF RETURN_TAB.
SELECT PBUKR POSID FROM PRPS UP TO 20 ROWS
INTO TABLE VALUE_TAB WHERE SLWID = 'QLT UDF'.
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
RETFIELD = 'PBUKR'
WINDOW_TITLE = 'Statusselektion'
VALUE_ORG = 'S' "hierdurch kann die Struktur genommen werden
TABLES
VALUE_TAB = VALUE_TAB
RETURN_TAB = RETURN_TAB
EXCEPTIONS
PARAMETER_ERROR = 1
NO_VALUES_FOUND = 2
OTHERS = 3.
end of additions
STEP SELONE (Select one of the elementary searchhelps)
This step is only called for collective searchhelps. It may be used
to reduce the amount of elementary searchhelps given in SHLP_TAB.
The compound searchhelp is given in SHLP.
If you do not change CALLCONTROL-STEP, the next step is the
dialog, to select one of the elementary searchhelps.
If you want to skip this dialog, you have to return the selected
elementary searchhelp in SHLP and to change CALLCONTROL-STEP to
either to 'PRESEL' or to 'SELECT'.
IF callcontrol-step = 'SELONE'.
PERFORM SELONE .........
    EXIT.
ENDIF.
STEP PRESEL (Enter selection conditions)
This step allows you, to influence the selection conditions either
before they are displayed or in order to skip the dialog completely.
If you want to skip the dialog, you should change CALLCONTROL-STEP
to 'SELECT'.
Normaly only SHLP-SELOPT should be changed in this step.
IF callcontrol-step = 'PRESEL'.
PERFORM PRESEL ..........
    EXIT.
ENDIF.
STEP SELECT    (Select values)
This step may be used to overtake the data selection completely.
To skip the standard seletion, you should return 'DISP' as following
step in CALLCONTROL-STEP.
Normally RECORD_TAB should be filled after this step.
Standard function module F4UT_RESULTS_MAP may be very helpfull in this
step.
IF callcontrol-step = 'SELECT'.
Maximum records are set to 0 because the counter for Max records keeps
running, even if you filter out certain records. This is a similar
problem as described in OSS Note 148525.
Feb 3, 2004 LS: devk907353
                (maxrecords = 0 defaults to maxrecords 500)
                As of release 4.7, it appears that maxrecords is
                being considered on the read of the view, rather
                than prior to presenting the selection list.
                When only 500 records are passed into this exit,
                the subsequent evaluation yields very few records
                in the selection list. By setting maxrecords to
                8000, the entire contents of the view are passed
                to this user exit, and therefor the search help
                yields a reasonable selection list to the user
                (as was the case in release 4.6b).
callcontrol-maxrecords = 0.        " devk907353
    callcontrol-maxrecords = 8000.     " devk907353
PERFORM STEP_SELECT TABLES RECORD_TAB SHLP_TAB
                      CHANGING SHLP CALLCONTROL RC.
IF RC = 0.
    CALLCONTROL-STEP = 'DISP'.
ELSE.
    CALLCONTROL-STEP = 'EXIT'.
ENDIF.
    EXIT. "Don't process STEP DISP additionally in this call.
ENDIF.
Added by vr, Nov. 2007 ---------------------------
CALL FUNCTION 'F4UT_PARAMETER_VALUE_GET'
EXPORTING
    PARAMETER               = 'PBUKR' " Reference to search help parameter
IMPORTING
    VALUE                   = value
TABLES
    SHLP_TAB                = shlp_tab
    RECORD_TAB              = record_tab
CHANGING
    SHLP                    = shlp
    CALLCONTROL             = callcontrol.
l_pbukr = value.
End of additions by vr ---------------------------
STEP DISP     (Display values)
This step is called, before the selected data is displayed.
You can e.g. modify or reduce the data in RECORD_TAB
according to the users authority.
If you want to get the standard display dialog afterwards, you
should not change CALLCONTROL-STEP.
If you want to overtake the dialog on you own, you must return
the following values in CALLCONTROL-STEP:
- "RETURN" if one line was selected. The selected line must be
the only record left in RECORD_TAB. The corresponding fields of
this line are entered into the screen.
- "EXIT" if the values request should be aborted
- "PRESEL" if you want to return to the selection dialog
Standard function modules F4UT_PARAMETER_VALUE_GET and
F4UT_PARAMETER_RESULTS_PUT may be very helpfull in this step.
IF callcontrol-step = 'DISP'.
DEVK909420 Begin
SELECT * FROM prps INTO TABLE it_prps
     WHERE belkz = 'X'.
Changed by vr, Nov. 2007
IF l_pbukr <> ''.
    SELECT * FROM prps INTO TABLE it_prps
       WHERE belkz = 'X'
         AND fkstl <> ''
         AND pbukr = l_pbukr.
    ELSE.
    SELECT * FROM prps INTO TABLE it_prps
       WHERE belkz = 'X'
         AND fkstl <> ''.
    ENDIF.
End of changes
DEVK909420 End
    SORT it_prps BY posid.
    LOOP AT record_tab.
      l_posid = record_tab+96(24).
      READ TABLE it_prps WITH KEY posid = l_posid.
      IF sy-subrc = 0.
        CALL FUNCTION 'STATUS_READ'
             EXPORTING
                  objnr       = it_prps-objnr
                  only_active = 'X'
             TABLES
                  status      = status_tab.
DEVK909329 Begin
        read table status_tab with key inact = ''
                                       stat = 'E0001'.
        if sy-subrc is initial.
          read table status_tab with key inact = ''         "DEVK909345
                                         stat = 'I0002'.   "DEVK909345
        endif.
DEVK909329 End
      ENDIF.
      IF sy-subrc NE 0.
        DELETE record_tab.
      ELSE.
       IF record_tab+114(1) EQ '.' AND
          record_tab+115(1) EQ '9'.
         DELETE record_tab.
       ELSE.
DEVK909420 Begin
        IF record_tab+102(1) EQ '9'.
          DELETE record_tab.
        ELSEIF record_tab+104(1) EQ '9'.
          DELETE record_tab.
        ENDIF.
DEVK909420 End
       ENDIF.
      ENDIF.
    ENDLOOP.
    EXIT.
ENDIF.
ENDFUNCTION.

Hi Vitaly,
Process on Value Request and search help exit is entirely two idea to display the f4 values.please remove the PROCESS ON VALUE REQUEST from the function module.write the required select statements after   CHECK callcontrol-step EQ 'SELECT' . and pass the value to the function module
CALL FUNCTION 'F4UT_RESULTS_MAP'
      TABLES
        shlp_tab          = shlp_tab
        record_tab        = record_tab
        source_tab        = l_record
      CHANGING
        shlp              = shlp
        callcontrol       = callcontrol
      EXCEPTIONS
        illegal_structure = 1
        OTHERS            = 2.
    IF sy-subrc <> 0.
      MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
              WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
    ENDIF.
    IF ( sy-subrc = 0 AND l_record IS INITIAL ).
      MESSAGE 'No values found' TYPE 'S'.
    ENDIF.
    callcontrol-step = 'DISP'.
Find the documentaion for this function module for further help
message edited by
shibu

User exit/ BADI ME*N

Hello,
first the situation and then my question.
I have to implement a search help exit on knttp. I know the search help and have implemented the exit.
Know i need proccesing data in the exit of the purchase.
For example:
I start ME22N,
then i push F4 on KNTTP in position screen.
Then i have to check the field BSART in header screen to decrease the result of search help with a condition on BSART.
my opinion for a good solution is to find a user exit or badi in the process of displaying the purchase and set a static attribute of a new implemented Z class. To get this parameter in searchhelpexit create an instance of this class and get this attribute.
The release is 4.6C so i can't implement an enhancement point.
At time of Badi processing ME_PROCESS_PO_CUST - subscribe there are no purchase data in access.
I need the information of the purchase header at the time of showing this purchaseorder, and when you change the purchase order.
This changes have to be implemented in the enjoy transactions ME21N,ME22N, ME23n, ME51N,ME52N, ME53N.
Thank you in advance.
Best regards,
Dennis
Edited by: Dennis Goerke on Dec 8, 2008 3:33 PM

My Problem, was i have no information about the purchase order in the searchhelp exit so i can't process a check on the field BSART.
But i have found two badis for my problems.
ME_PROCESS_REQ_CUST
and
ME_PROCESS_PO_CUST
There is the Method OPEN, which is execude at opening the purchase or requisision.
There i can cast the header data and write a static attribute.
Then i can create an object in search help exit to access the attribute, so i can do a check on BSART in this search help now.
Thanks for your answer.
best regards, Dennis

User exit ZXPADU02 - evaluating SY-UCOMM

Hello everyone,
I am trying to display an error message whenever someone tries to create a new work schedule rule (P0007-SCHKZ) in infotype 7. However, the error message should just come up when the user is trying to save his data.
I am using user exit ZXPADU02 for this purpose. My problem is that SY-UCOMM does not seem to hold reliable data in this user exit, and SSCRFIELDS does not seem to be supported at all.
My code looks like this (only the relevant code snippet in ZXPADU02):
CASE INNNN-INFTY.
        WHEN '0007'.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING PRELP = INNNN
        IMPORTING PNNNN = P0007.
      CALL METHOD CL_HR_PNNNN_TYPE_CAST=>PRELP_TO_PNNNN
        EXPORTING PRELP = PSAVE
        IMPORTING PNNNN = P0007_ALT.
      IF P0007_ALT-SCHKZ <> P0007-SCHKZ
      AND IPSYST-MASSN IS INITIAL " do not warn within an info group of a personnel action
      AND SY-UCOMM = 'UPD'. " only warn when saving the data -> problem here <-
        MESSAGE 'Do not change IT7 directly or else.' TYPE 'I' DISPLAY LIKE 'E'.
        SHOW_DATA_AGAIN = 'X'.
      ENDIF.
At first glance, the above works nicely. But this is what happens when I test more thoroughly:
I create a new period in IT 7, enter a P0007-SCHKZ other than the one that was previously valid, press F11. Some warnings appear (for different reasons), which I dismiss using the Enter key. Afterwards, the above code fires, the error message is being displayed, and I am thrown back into the data screen. So far, so good.
Now I simply alter the value in the field "Weekly hours" (P0007-WOSTD) and press Enter (!). Again a series of warnings appear, including one that a dataset is going to be deleted (seeing that an IT 7-period with just the same date range already exists). I confirm that with Enter, and the data is being saved. The above code does not fire because I have only pressed Enter - but the data is being saved anyway!
Looks like a pretty erroneous behavior on the side of the SAP system. The question is whether I have a chance to do something about it in the code.

Mihir Nagar wrote:
Dear Petersen,
Your IF condition seems ok. I doubt on the message statement. Can you replace your message statement with type E.
MESSAGE 'Do not change IT7 directly or else.' TYPE 'E'.
      ENDIF.
Hope this works.
Regards,
Mihir.
I did not expect this to work, because normally you use type 'E'-messages only in certain PAI-environments, but it does the job, thank you!
make use of field IOPER of the structure PSYST to check on the infotype actions INS, MOD, COP, DEL...
In this particular case I did not care, so I did not check that. IT 7 should only be maintained through personnel actions in our case.
Next you can check with sy-ucomm field the different between "enter" and "save". With "save" sy-ucomm will be 'UPD'.
That is what I did, but as I described, there was a situation when SY-UCOMM is SPACE, but the system saved anyway due to a prior save attempt.

Using a variable not in the Export,Import, table Parameters in USER EXIT

Hi all,
During the Invoice Creation, I need to add an entry in the VBFS table, so that it will be displayed in the system log. In the FM 'RV_INVOICE_CREATE', the structure corresponding to it is XVBFS. There is a user-exit CALL CUSTOMER-FUNCTION '002', in this FM 'RV_INVOICE_CREATE'. But the import, export or Table Parameters does not have XVBFS.
How can I use XVBFS inside the User exit?..
Please help.
Regards,
Asha

Hi,
I dont know whether this will help u...
write this in user exit...to access variables/tables of main program..
FIELD-SYMBOLS: <komv>.
ASSIGN ('(SAPLMEPO)TKOMV[]') TO <komv>.
where.. SAPLMEPO is the main program...and TKOMV[] is a internal table in SAPLMEPO.
regards
Sukriti....

How to find out the user exit is implemented

Hi All,
Kindly let me know the process to be followed to find out the User exit is implemented in SAP system.
I have seen many senriors suggestions for some treads to check if there is any Exit is implemented in the process when the system is behaving differently rather standard.
Is it the only way with help of ABAP'er we can find out or the functional consultant also can find out through some procedure?
I tied in google for this doubt, but i could not get the relavant answer.Pleaea execuse me if this already answered.
Thanks,

Hi Krishna/TW,
Thank you for your immediate replies. Sorry i think i have not explained correctly my requirment.
Let me explain my requirement once again.Let us say Comapny has implemented one Exit in the project, now i want to find out what exactly the Exit was implemented.
Example: In STO process user is able to increase the qty in delivery. As per the client requriement system should not allow.
This is not possible in standard to control even after maintainig check over delivery field in 0VLP.
For this comapny has already implemented one enahnceament.
User Exit : USER EXIT_READ_DOCUMENT
Program: MV50AFZ1
like this when any one joined in the project we do not know what are all the Exits are implemented in the SAP system where we are working.
So if i want to find out if there is any Exit or enhancement implemented, what is the process to find out?
I hope now am clear with my requirement.
Thanks in advance.

How to find out the user-exits?

hi.
how to find out the user-exits?
regards
eswar.

Hi,
*& Report ZEXITFINDER
*report zexitfinder.
*& Enter the transaction code that you want to search through in order
*& to find which Standard SAP User Exits exists.
*& Tables
tables : tstc, "SAP Transaction Codes
tadir, "Directory of Repository Objects
modsapt, "SAP Enhancements - Short Texts
modact, "Modifications
trdir, "System table TRDIR
tfdir, "Function Module
enlfdir, "Additional Attributes for Function Modules
tstct. "Transaction Code Texts
*& Variables
data : jtab like tadir occurs 0 with header line.
data : field1(30).
data : v_devclass like tadir-devclass.
*& Selection Screen Parameters
selection-screen begin of block a01 with frame title text-001.
selection-screen skip.
parameters : p_tcode like tstc-tcode obligatory.
selection-screen skip.
selection-screen end of block a01.
*& Start of main program
start-of-selection.
Validate Transaction Code
select single * from tstc
where tcode eq p_tcode.
Find Repository Objects for transaction code
if sy-subrc eq 0.
select single * from tadir
where pgmid = 'R3TR'
and object = 'PROG'
and obj_name = tstc-pgmna.
move : tadir-devclass to v_devclass.
if sy-subrc ne 0.
select single * from trdir
where name = tstc-pgmna.
if trdir-subc eq 'F'.
select single * from tfdir
where pname = tstc-pgmna.
select single * from enlfdir
where funcname = tfdir-funcname.
select single * from tadir
where pgmid = 'R3TR'
and object = 'FUGR'
and obj_name = enlfdir-area.
move : tadir-devclass to v_devclass.
endif.
endif.
Find SAP Modifactions
select * from tadir
into table jtab
where pgmid = 'R3TR'
and object = 'SMOD'
and devclass = v_devclass.
select single * from tstct
where sprsl eq sy-langu
and tcode eq p_tcode.
format color col_positive intensified off.
write:/(19) 'Transaction Code - ',
20(20) p_tcode,
45(50) tstct-ttext.
skip.
if not jtab[] is initial.
write:/(95) sy-uline.
format color col_heading intensified on.
write:/1 sy-vline,
2 'Exit Name',
21 sy-vline ,
22 'Description',
95 sy-vline.
write:/(95) sy-uline.
loop at jtab.
select single * from modsapt
where sprsl = sy-langu and
name = jtab-obj_name.
format color col_normal intensified off.
write:/1 sy-vline,
2 jtab-obj_name hotspot on,
21 sy-vline ,
22 modsapt-modtext,
95 sy-vline.
endloop.
write:/(95) sy-uline.
describe table jtab.
skip.
format color col_total intensified on.
write:/ 'No of Exits:' , sy-tfill.
else.
format color col_negative intensified on.
write:/(95) 'No User Exit exists'.
endif.
else.
format color col_negative intensified on.
write:/(95) 'Transaction Code Does Not Exist'.
endif.
Take the user to SMOD for the Exit that was selected.
at line-selection.
get cursor field field1.
check field1(4) eq 'JTAB'.
set parameter id 'MON' field sy-lisel+1(10).
call transaction 'SMOD' and skip first screen.
Regards

How to find out appropriate user exit

Hi,
I want to know how to find out the user exit that matches to the requirement. Suppose for a material master program, there are so many include programs hence im unable to find call custer-function and even unable to debug an appropriate include. Please help me out how to learn user exits in a rightious way.
Thanks
Basu

Look for program SAPICSS_ in your system and run it. This program can also be found under CMOD menu: Utilities -> SAP enhancements.
This will only give you the CMOD user exits.
There is a program someone made that searches for all sorts of user-exits (including BADI's etc.). I remember that it was posted on sapfans.com
Edited by: Maen Anachronos on Apr 6, 2009 3:22 PM

How to find out FICO user exits that are used by User

How to find out the FICO user exits that are used by user.

Go to tcode CMOD. In the project field drop down your list there. Put a Z* there and run the list. These should be all the exits that are activated. Search for the ones that pertain to FI. You can also search by development class. You need a little ABAP knowledge to search easily. You get this by going to the tcode then to status then to the program then to the attributes. There you find the development class. Ie FBAS.
pls assign points if helpful as a way to say thanks.

Free Goods Problem and User Exit if needed in Sales Order

Hello All,
The problem is related to Free Goods in Sales Order which is given with an example -
We have maintained Free Goods ( T Code - VBN1) in inclusive scenario which is as follows -
For 210 PAC (Pack) of Material A 18 PAC Free.
Where 1 PAC = 20 BT (Bottle) and 20 PAC = 1 CV (Case Pack)
In the material master of Material A the Base Unit Of Measurement (UOM) = PAC and Sales UOM = Blank so that we can use any conversion factor maintained for the material.
The conversion factors maintained for Material A are as follows -
1 BT = 1BT
1 PAC = 20 BT
1 CV = 20 PAC
Now when we are raising sales order for 11 CV the free goods are not generated in the Sale Order.
Again if we maintain the Sales UOM in CV and raise the sales order it is showing :
10 CV as main item and 1 CV as Free which is wrong because in the conversion factor we have already maintained 1CV = 20 PAC , Whereas in the inclusive scenario it is given 11CV = 210 PAC and 210 PAC = 18 PAC is free.So in any case it is taking into account 2 more PACs.
Please suggest what need to be done in this case in respect of User Exit or Source Code in ABAP if needed.
Thanks & Regards
Priyanka Mitra

Hello Priyanka Mitra,
We are facing a problem same as you.
How did you solve this problem?
We are very glad if you teach it concretely.
Please advise your solution to us.
Thanks.

User Exit/ Badi for Changing Quant parameters during TO Creation

Hi Gurus,
Could you please guide me to advice the User Exit/Badi which can be used for changing Quant Data during TO Creation.
User Requirement: Using "Recepient Field" in MIGO as a Key Value for FIFO in WM during goods issue. Receipient is copied into TR and TO (Standard SAP Functionality). For the purpose of Stock Removal based on Receipient Value, we need to copy this value into Quant Data field named Certificate Number ("LQUA-ZEUGN").
I will highly appreciate reply from Gurus.
Regards,
Gupta M

Hi manish,
Use the Exit MWMTO001 for this purpose and modify the table accordingly. This will solve your problem.
Thanks,
Shibashis

BADI/user exit for transcation code "BP" in CRM

Hi Experts,
Is there a BADI / user exit that is triggered after successful saving/updating of Business Partner using transaction code "BP"?
We want to send general infos such as partner number, Name, Birth date, etc. about the business partner being created/updated using IDoc.
We are using CRM WinClient 4.0.
If you know the steps on how this requirement will be done, kindly post them.
Thank you very much.

I don't have any CRM system at hand, but I'm sure there are some BAdI's for this. Look in SE18 for BP or BUS, and i'm sure you will find something.
One suggestion though: Before going for the BadI, try and see if CRM also uses change pointers for sending Idoc's . This case you wont need any user exits / badis, an probably no programming at all.
Transaction
BD50: Activate Change Ptrs for Mess. Type
BD61: Activate Change Pointers - Generally
and use report RBDMIDOC for triggering IDoc.

What are the user-exits which will trigger on saving Sales Order

Hello Experts!!!
I am working on Sales Order VA01. The requirement is I need to pre populate Sold-to-Party field. I find out user-exit (V45A0002 Predefine sold-to party in sales document ). So it is working fine.
Now second requirement is I need to capture all the date once user saves Sales Order. Also the time or Sales Order creation I have to make u2018GRAYu2019 some of the fields so user cannot change the value. Can anybody tell me which user-exits should I use to retrieve the entire information user entered and lock fields in Sales Order screen?
Thanks a lot on advance.

Hi
U can't find it there,because it's a include, not enanchement.
So u need to use the trx SE38, not CMOD.
For sales ored there aren't the enanchements, but only some FORMs defined in particular includes.
U need to get the access key by OSS in order to change them.
These are the rest of the includes where u can find other exits:
       INCLUDE MV45ATZZ.            " Data definitions in MV45ATOP
         INCLUDE MV45AOZZ.             " User-modules PBO
         INCLUDE MV45AIZZ.             " User-modules PAI
         INCLUDE MV45AFZA.             " User-forms < 3.0
         INCLUDE MV45AFZB.             " User-forms
         INCLUDE MV45AFZC.             " User-forms < 3.0D
         INCLUDE MV45AFZD.             " User-forms   3.0E
         INCLUDE MV45AFZF.             " User-forms   3.0F
       include mv45afzg.             " User-forms   3.1G
         INCLUDE MV45AFZH.             " User-forms   4.6B
         INCLUDE MV45AFZZ.             " User-forms
         INCLUDE MV45AFZ4.             " User-forms   4.0
Anyway u can find some information about these exit in customizing (trx SPRO):
Sales and Distributions->System modifications->User exits
Max

IW31 - User Exit / BADI for changing data in Component's Order.

Hi gurus,
I need to update the field WEMPF in the order components during the Order Creation (Tx IW31).
Is there any User Exit or Badi I can use?
Thanks in advance !!

At WO10009 User Exit...we can use this FM:
CO_BC_RESBD_OF_ORDER_GET -> Get RESB internal table.
CO_BT_RESB_UPDATE -> Update RESB table.
Althought during creation (IW31) when the order numer is temporal ($$$$$$$$$$$1), this FM works great, cause it reads from memory, not from database.
Regards,

Name of the structure needed for sales order user exit

Hi,
I am planning to write a user exit which will insert the data into my ztable the moment the new sales order is created and is saved.
I have identified FORM USEREXIT_SAVE_DOCUMENT as the necessary user exit. But the problem is that while inserting the data into the ztable I cannot insert the data from vbak as the data will be inserted into this table after the SO is saved.
Thus I need to identify a structure which is used to populate the vbak table so that it simultaneously inserts the data in the ztable as well. Can anyone help me with the name of the structure so that these fields i.e. vbeln, vkorg, vtweg, spart are inserted into my ztable?
Also need to know how to convert the net value i.e. vbak-netwr in Indian Rupees as it gets stored as Dollars ....
Thanks,
Vinod.

Hi,
One of the structure being used is RV45A, there are several other str's being used as well for various calculations,
check out program SAPMV45A for the same.
& in order to convert vbak-netwr to rupees use the below statemetnt,
WRITE vbak-netwr TO zvbak-netwr CURRENCY INR.
Regards,
Raghavendra
Message was edited by:
raghavendra ay

Searchhelp User Exit ??

Similar Messages

Maybe you are looking for