Searching a 100 pin robust connector interface

We have a 100 pin national instrument cable and a corresponding connector on our board. We now search for a more robust connector interface, so the pins don't get damaged when frequently dis- and reconnecting the cable to the board. Anyone knows where to find those 100 pins connector interfaces that might be screwed or securely attached to the PC and the cable ?!?!

I just checked the connector to our serial boards and it does have a fastening screw. I know that some of these connectors (for daq) have a fastening click-clip instead. You can check out, http://www.ni.com/products/ Hope this helps.
-NI support

Similar Messages

Need the SCSI-II 100-pin connector for the PXI-6624

Hi. I need to build a custom cable for the NI PXI-6624 and I would like to know where can I get the 100-pin connectors. Thank you.
Daniel
Chile

You should be able to find the connectors here:
Subminiature and Microminiature D Connectors .050 Series Cable Connectors (SCSI)AMP (749111-8)
The parts are made by Tyco Electronics P/N: 749111-8
Otis
Training and Certification
Product Support Engineer
National Instruments

100-pin Connector Required when Building Custom Cable for PCI-6031E

Four 100-pin connectors are required to make custom cables to connect the PCI-6031E. Where can I get this connector?

Hi Tom,
Thanks for your reply. The ringing (noise if you like, but it is definetly being coupled to the output signal from the source) is occuring during both the logic low and logic high periods of the output. I agree, this is still within the TTL noise margins, but is staying within the margins the only important thing? - e.g. what happens multiple devices are clocked using the same output pulse - the pulse shape is degraded slightly due to cabling and input capacitance etc, and now, because of the additional ringing, the logic thresholds are being crossed when they shouldn't be. If you consider that the source signal is 5Vpp and the induced ringing is 0.4Vpp then the rejection ratio would be 20*log10(0.4/5) = -22dB, not very good. The situation is not as bad when one of the internal timebases is used as the source but this particular application requires an external one. So, I'm looking for ways to reduce the ringing if you're aware of any. One possibility might be to reduce the cable length - I'm using the 2m cable so maybe you could try the 1m cable for me and see if things improve.
Jeff

Lost 30 pin dock connector cap - need info as to where I can replace it

I feel I'm alone in the universe. I have lost the little white 30 pin dock connector cap for my 3G, 15 Gb iPod. Does anyone know how I can get some replacement caps? Apple does not seem to offer them as a after sale item. I have searched iLounge and found a mythical reference to a filco product called the Dock protector cap but one reference link was dead and the other put me through to a Japanese Amazon page that was unintelligible. Are there any domestic products available? A quick look at Belkin and Griffin came up empty. Please help!

here is the link to protectorz
Nano 4GB black,Moto RAZR V3 black, PSP, all kinds of cases for nano,radio/remote Windows XP <img src="http://i36.photobucket.com/albums/e13/superman5656/s.gif"align="right"</span>

Sun Ray connector interface is invalid

I think I have some kind of configuration problem with my Sun Ray server. When I try to run the utadm -A "I.P. address" command, it comes up at the end with a message about the "Sun Ray connector interface is invalid" or something like that. The problem seems to be with this because the Sun Ray server will not update the firmware on the Sun Ray Clients. Even using the utfwadm -A -e "MAC address" to force an update it just sets it up in the dhtptab.conf file with the macro to download the firmware but when I power cycle the Sun Ray client it does not update the firmware. The only thing I can think of is that it must have something to do with the "Sun Ray connector interface is invalid" error that is preventing it from updating.
The DHCP server will also not update the "LeaseTime" nor the "LeaseNeg" options that I have configured.
Can someone tell me how to get rid of the "Sun Ray connector interface is invalid" error and/or if this might be what is preventing my firmware updates to my Sun Ray clients?
Thanks,

I have the same issue . . .
1. Sun Ray 5 (Sun Ray 4.2)
2. SRWC 2.2
3. Solaris 10 u9 X86 on two x2200
4. Terminal Server on Win2K3 R2 Standard x64 Edition SP2
I have a handful of users and they all logon the same way, which is to enter username & password then I have the following lines at the end of the users' individual .dtprofile file . . .
<begin snip>
DTSOURCEPROFILE=true
/opt/SUNWuttsc/bin/uttsc -b -m -O -u uname 192.168.100.29
exit
<end snip>
Of course 'uname' is actually the user name followed by the Terminal Server IP address and as you can see I am using the '-O' option, but every morning all the users on a server have their Sun Ray sessions reset and I find this in the messages file . . .
Mar 16 09:38:31 sunraya Sun Ray Connector proxy:[12941]: [ID 855542 user.error] Child closed socket prematurely, session shutdown
. . . . Using cron, I reset the Sun Ray service twice a day on both servers at 7AM and 7PM . . .
# cat /sunray-restart.script
# This is to restart SunRay 5 service due to
# what I think may be a memory leak that disconnects
# the SunRay Windows Connector every day
/opt/SUNWut/sbin/utrestart -c
echo "#" >> /var/adm/messages
date >> /var/adm/messages
echo "#" >> /var/adm/messages
echo " RESTARTING SUNRAY SERVICE " >> /var/adm/messages
echo "#" >> /var/adm/messages
echo "#" >> /var/adm/messages
. . . But this does not appear to having an affect.
I will be looking around the forums for any other bits of information about this. The "Known Issues" can probably be found in the Release Notes.

Where can i find a 30-pin Apple connector?

Where can i find a 30-pin Apple connector?,
i want to connect an iwow adapter for my iphone,ipod touch and ipad but i can't find it in the apple store,
so does anyone know where i can buy one?

I just "Googled" the question....."Where can I find a 30-pin connector" and it linked me to a number of web sites. Try it. http://https://www.google.com/search?sourceid=navclient&ie=UTF-8&rlz=1T4GGHP_enU S437US437&q=where+can+i+find+an+apple+30+pin#q=where+can+i+find+an+apple+30+pin& hl=en&rlz=1T4GGHP_enUS437US437&prmd=imvns&source=univ&tbm=shop&tbo=u&sa=X&ei=y3O gTrXLC4Pk0QHNzrSFBQ&ved=0CHcQrQQ&bav=on.2,or.r_gc.r_pw.,cf.osb&fp=cf8d5e62edefb1 0&biw=1292&bih=691

Help: Homemade 20-pin to 15-pin VGA connector, aligning CD lens

Hello. I'd like to revive my iMac 350 with an external monitor. Does anyone know user-friendly guide to build a homemade 20-pin to 15-pin VGA connector? Thanks.
Also, when I forced a CD that seemed to be too thick for the slot loading drive, the lens might have misaligned. I've opened it and the lens did not seem to be scratched or anytime. Does anyone have a DIY guide on how to align laser lens on this slot loading CD drive?
God bless,
Alvin

Hello. I'd like to revive my iMac 350 with an
external monitor. Does anyone know user-friendly
guide to build a homemade 20-pin to 15-pin VGA
connector? Thanks.
God bless,
Alvin
Alvin, what you want do is already available for $12.00.
Get it here: http://www.nextag.com/15-pin-vga-adapter/search-html

How to diagnose a broken 30 pin dock connector?

Is there a "diagnostic" application to determine if my Iphone 4 — 30 pin dock connector is fully functional? BTW - all lint and dirt has been removed (delicately). This iPhone has been able to perform TV/video out and mirror display with a (still) fully functional 30 pin to VGA connector, VGA cable and VGA equipped monitors. This phone currently cannot perform the same task. Only other variable is a conflict with iOS 6.1.3.
Thanks for any help.

Hi there jsoard!
I have a website for you that can help you with some steps for troubleshooting that may help you resolve this issue. The website is an iPhone troubleshooting assistant, and can be found right here:
Apple - Support - iPhone - iPhone Troubleshooting Assistant
http://www.apple.com/support/iphone/assistant/phone/
Thanks for being a part of the Apple Support Communities!
Regards,
Braden

Itunes not recognising iphone 3GS. iphone is in a loop of searching..with image of connector to "itunes" on screen. Very frustrating - please help

itunes not recognising iphone 3GS. iphone is in a loop of searching..with image of connector to "itunes" on screen. Very frustrating - please help

Check first if your iTunes is up-to-date. If it's updated, try using a different cable or try plugging it to a different USB port.

Is there a way to add a google search tab to the safari window interface in ios7?, is there a way to add a google search tab to the safari window interface in ios7?

Is there a way to add a google search tab to the safari window interface in i0s7?

You can't add icons to Safari on iOS devices. You can set google as your default search engine for Safari via Settings > Safari > Search Engine - the URL field acts as both URL and search on iOS 7

(iPhone4) 30 pin female connector to micro USB male connector adapter

Is there such a thing as a (iPhone4) 30 pin female connector to micro USB male connector adapter, which can transfer audio / music?
My car audio system has a 30 pin male connector for my iPhone4. Would like to use my Android phone as well.

Google it if nothing shows ,it doesn't exist

30-pin Doc Connector - Potential Problem ?

Hello,
Today I inserted my charger into the 30-pin doc connector and the phone
started to charge normally. Usually when the charger is not fully plugged in
I push it in a little more so that it has fitted all the way in. I thought the charger
had not gone in all the way (when it had) and I pushed it in more three more
times with a little bit of force. Nothing happened and the phone charged just
fine and everything was normal.
My question is,
1) By additionally pushing in the charger, have I in any way
damaged the 30-pin doc connector?.
2) Should I be concerned for the future?.
3) How can a pin doc connector possibly damage? (ie by pushing or bending etc?)
Thanks
PA

It appears that the device was defective right out of the box and if that's the case I would return it right away for an exchange and indicate the issue that you are having with the dock connector. Also inform them that there appears to be an object that's wedged/stuck in the connector and that you received it in that condition. From my past experiences Apple is very good about exchanging items like that especially when you receive it in that manner/condition. I hope that helps. My apologies I also forgot to point out that if it's an Online purchase you don't have to do an online return you can simply go to your nearest Apple Store along with your printed out Online Apple store receipt that you received with your shipment.

7 pin DIN connector.

Hello Team,
What are the features of the 7 pin DIN connector on the right side of the PowerBook G4?
Is is just video, or does it include audio as well?
The PowerBook G4 comes with a conveter cable to composite video, if there is no audio does it also convert to 4 pin video so I can connect direct to a TV using S-Video?
If the 7 pins allow for video and audio is there a cable which has 7 pin DIN on one end and on the other end a S-Video DIN plus audio RCA connectors.
Thanks.

I hope someone can give a difinitive answer as it is badly documented by Apple and other places.
It seem that the 7 pin DIN is used to provide three output options using special connectors for video only....
1) 7 pin DIN video out
2) 4 pin S-video with dongle video out
3) Composite video out, cable supplied with PowerBook G4
No audio. It seems like to show video and audio on the screen you need to use the 7 pin DIN, as converted, to show the video, and the headphones socket to get audio.
Not a nice way to conect. The DIN connector is on the right and the headphones connector on the left.
If this is wrong, and I hope it is, then please let me know.

Connecting the V-Studio 100 controller as GarageBand interface

I am trying to connect the Cakewalk (Roland) V-Studio 100 controller as an interface to GarageBand. In the Sound Pref's I see that the Mac is receiving audio signal from the V-Studio but GarageBand is not getting it. I did set up the GarageBand Pref's properly, too, using the directions from Cakewalk.com:
Configuring the VS-100 for use with GarageBand in OS X
Setting up as an Audio I/O:
From the GarageBand drop down menu, select Preferences.
Click on the Audio/MIDI tab at the top of the General window.
Assign the Audio Input and Audio Output to “VS-100 44.1kHz”.
I am running GarageBand 5.1 on MacOS 10.6.8.
HELP, please! Thanks

Did you choose the correct input channel in track info pane?

How to use Integrated 10/100 Base-T networking interface

I am new to Solaris, in fact I just installed it. I assumed that I would be able to connect to the internet immediately, but that isn't the case. I have an HP a1610n media center pc, and it comes with an Integrated 10/100 Base-T networking interface. Do I need to install a driver to use this network interface?

Can Solaris 'see' your device? this tool wil let you know. [Sun Device Detection Tool 2.1 |http://www.sun.com/bigadmin/hcl/hcts/device_detect.jsp]
If it doesn't see the controller, there are links on the device detection tool page that should help you find a driver - if one's available - for your NIC.
john

Searching a 100 pin robust connector interface

Similar Messages

Maybe you are looking for