Searching and Noservice as I switch to 3G

I have an active 3G data plan.when I enable 3G from settings it starts searching for network and then 3G network stays for 10seconds and it again starts searching.At any point of time the network is lost and even my phone hang and i cant even open screen.I am using iphone 4 and latest 7.1.1 ios Please help me!!

Follow the troubleshooting steps provided in the article below:
http://support.apple.com/kb/ts4429

Similar Messages

Want to switch off the general search and open the advanced search

Hi All,
I want to switch off the general search and open the advanced search when i load my application. For this I have followed the steps previously posted in the forum.
I have created a version(0001) and for that version i have checked the open advance search. If i do this way it works perfectly but when i click on the result list the detail tab does not come. But when i remove this settings and go through general search both the advance search and the general search works properly. I am able to get the details tab.
Why am I not getting the details tab if i open the advanced search directly. Please give your inputs.
Thanks & Regards,
Anuradha.P

Hi Anuradha.
Please check the following thread:
URGENT!!! Show Advance Search in INIT event
Best regards.
Armando Rodriguez.

Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing

Hi, im having problems with my iphone it would always be showing up "No Service" even when I get my simcard out, when i turn airplane mode it would switch to " Searching" and then go back to "No Service", i have tried restoring several times, but nothing has changed. I must say that my iphone was working perfectly until the last months my battery began to die all from a sudden, so my phone got turn off really frequently, so then i ordered a battery and changed it myself so when phone was on.. it had this problem.. im desperate here

No I haven´t take it to Apple Store, i think I will actually. My iphone was jailbroken and ulocked with gevey sim, but when this failures began i decided to restore it, and I did preserve the baseband, but when I took it into one of these "Places" they told me it would be a good idea to do a clean restore and see if this fixed the problem so I upgraded my baseband, and right now my iphone is freshly restore, no jailbreak no nothing.
Btw yes something like a year ago my screen was replaces by others not by apple, but I didnt had any issues after this.. until today (a little more than a year later).

How do I search and find the latest albums of a particular genre (Circuit)?

Hello,
I'm new to iTunes and the music I want to buy is Circuit Party (House).
All I want to do is log on and search for and find the latest Circuit Party music albums. Unfortunately, sometimes I will do a search and a song and its album will show up, but the album is not appearing in the "New and Noteworthy" section, even though it is a new release.
What I have been doing as a workaround is to visite another site which has the latest Circuit music albums and then switching back to iTunes Store to search for each specific album. This is a slow process and a pain!
I figure I must not be doing something right with the iTunes store, so if you can tell me the best way to find my music, I would really appreciate it!
Thanks!

Hi Tom,
As I can see from what you posted, this correction seems a program correction. You can use SNOTE transaction to apply it. Just download the OSS Note and apply it. The transaction it's pretty simple to use.
Otherwise if you don't have SNOTE installed you can find them in the following places:
SELECT_STATE_FOR_CONDTAB_BUILD - This is a function you should find this through the se37.
Hope it helps.
Regards,
Gilberto Li

Server 2008r2 and windows 7 pro slow to no networkshare file searching and file access (green progress bar)

we are running a windows server 2008r2 sp1 domain controller and a 3com gigabit switch to which 7 windows 7 pro computers are connected. We are only using the windows server to distribute a few printers and as a network share (z drive).
we are storing all files (word documents only) centrally on the server (z share), and files are accessed and written to the z share.
Problem is that file access from the z share on the windows 7 client computers is at best buggy. we are able to browse the z-share, but as soon as we want to search the z-share for files (f.i. use file explorer with "content: memorandum") the green
progress bar shows and no search is performed. something like alphabetically sorting a directory on map/file name on the z-share also shows a green bar with no sorting. manually going to the files works.
One thing i noticed, sometimes not all files that one user created and stored on the server is visible and can be found by another user. I prefer to disable all offline file caching setting, because that feature is not used. no files should be made accessible
offline. i don't know where to change that on the server side.
I am reluctant to experiment on the server end (2008r2 sp1), so i tried a few suggested solutions on the client end (windows 7 client)
I tried disabling offline file caching
i tried properties (z share) ==> advanced and map optimizing and several options there
i tried disabling the smbv2 protocol and disabling the smbv1 protocol (using
sc.exe config lanmanworkstation depend= bowser/mrxsmb10/nsi command etc. posted by microsoft)
i tried disabling windows defender
i tried accessing the z share via ip and server name (the share is mapped via its servername, e.g. dennis-dc1\share). still the same
file searching on the clients c drive ('own harddrive') works much better, file searching on the server also works.
any suggestions or solutions that i can test on the client side, as mentioned i am reluctant to change something on the server side. if a solutions works, i prefer to change it on the server side.

Hi,
The issue could be due to windows indexing service taking long time in sorting and searching in mapped drives. Please try the steps belwo to disable windows indexing service or search service on the windows 7 client to resolve the issue.
You can click on Start and select Control Panel, click on
Programs and Features, go into the Turn Windows Features on or off section Scroll down the list and uncheck the box next to Indexing Service or Windows Search.
Best Regards,
Mandy
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Firefox no longer gives automatic prompts when I type in first few letters of a search - even though my browsing history is being recorded, and "Remember search and form history" is ticked in the Privacy preferences: what's gone wrong?

Firefox has recently stopped giving (personalised) automatic prompts when I type in the first few letters of a search. What does come up is a long list of possible search subjects - but these are very general and don't reflect my own personal browsing history. My browsing history IS being recorded, however, and the "Remember search and form history" box is ticked in the Privacy preferences.
I'm not using the "Private Browsing" option.
There are two MacBooks in the house, sharing one wireless router. This problem has cropped up on both laptops - mine and my wife's - at around the same time.

Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Firefox, google chrome, IE8 lose the ability to search and find text on certain archived books. IE7 can search and find. Is there a way to fix this?

Firefox, google chrome, and IE8 all have the same error. The search and find functions for certain on-line archive books does not work on these browsers. They claim that text does not exist. In IE7 the text is found. I can be typing in a word I see on the page and all three still bottom out with this error. Try this with the Scots Dialect Dictionary:http://www.archive.org/stream/cu31924026538813#page/n5/mode/2up
or
A Glossary of Tudor and Stewart Words ( a google book even) http://books.google.com/books?id=hPhLAAAAMAAJ&pg=PA198&lpg=PA198&dq=tudor+exclamations&source=bl&ots=8DFgw_eH8t&sig=-Mxf2gwq3nZDVLOCn_y06ZBRIfA&hl=en&ei=O-dNTey0H8PdgQf_2cgf&sa=X&oi=book_result&ct=result&resnum=9&ved=0CDIQ6AEwCA#v=onepage&q&f=false
Again the search and find function works with IE7 but not these new browsers. And I would love to upgrade from IE7 but cannot.
Any way to fix this on Firefox?

Works for me on Linux with Firefox 10.0.1
Start Firefox in [[Safe Mode]] to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.org/kb/Safe+Mode

Firefox clears the searchbox on ebay when i perform a search and nothing happens!

Firefox clears the search-box on ebay when i perform a search and nothing happens! The page just refreshes and i can't find any items. It works as normal when i try with IE though..
== This happened ==
Every time Firefox opened
== about 3-4 months ago..

Start Firefox in [[Safe Mode]] to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
*Don't make any changes on the Safe mode start window.
*https://support.mozilla.com/kb/Safe+Mode

Java binary search and insert

I'm currently writing a program which is an appointment book. I currently have 4 classes and at the minute it can sort the array and print it out. I'm stuck at binary search and inserting a new appointment record. I will include the classes which i have got.
Appointment
 import java.util.*;
 import java.io.*;
 import java.util.Scanner;
 class Appointment implements Comparable
 private String description;
 private int day;
 private int month;
 private int year;
 private String startTime;
 private String endTime;
 protected static Scanner keyboard = new Scanner(System.in);
 public Appointment()
 description = "";
 day = 0;
 month = 0;;
 year = 0;;
 startTime = "";
 endTime = "";
 public Appointment(String appDesc, int appDay, int appMonth, int appYear, String appStartTime, String appEndTime)
 description = appDesc;
 day = appDay;
 month = appMonth;
 year = appYear;
 startTime = appStartTime;
 endTime = appEndTime;
 public void display()
 System.out.print(" Description: " + description);
 System.out.print(", Date: " + day + "/" +month+ "/" +year);
 System.out.println(", Start Time: " + startTime);
 System.out.println(", End Time: " + endTime);
 public void setDay(int day)
 { this.day = day; }
 public int getDay()
 return day; }
 public void setMonth(int month)
 { this.month = month; }
 public int getMonth()
 return month; }
 public void setYear(int year)
 { this.year = year; }
 public int getYear()
 return year; }
 public int compareTo(Object obj)
 if (obj instanceof Appointment)
 Appointment appt = (Appointment) obj;
 if (this.day > appt.getDay())
 return 1;
 else if (this.day < appt.getDay());
 return -1;
 return 0;
 public String toString() {
 StringBuffer buffer = new StringBuffer();
 buffer.append("Description: " + description);
 buffer.append(", Date: " + day + "/" +month+ "/" +year);
 buffer.append(", Start Time: " + startTime);
 buffer.append(", End Time: " + endTime);
 return buffer.toString();
 public void read(){
 System.out.print("Description : ");String descIn=keyboard.next();
 System.out.print("Day : ");int dayIn=keyboard.nextInt();
 System.out.print("Month : ");int monthIn=keyboard.nextInt();
 System.out.print("Year : ");int yearIn=keyboard.nextInt();
 System.out.print("Start Time : ");String startIn=keyboard.next();
 System.out.print("End Time : ");String endIn=keyboard.next();
 boolean goodInput = false;
 do{
 try{
 setDay(dayIn);
 setMonth(monthIn);
 setYear(yearIn);
 goodInput = true;
 catch(IllegalArgumentException e){
 System.out.println("INVALID ARGUMENT PASSED FOR day or month or year");
 System.out.println(e);
 System.out.print("RE-ENTER VALID ARGUMENT FOR DAY : ");dayIn=keyboard.nextInt();
 System.out.print("RE-ENTER VALID ARGUMENT FOR MONTH : ");monthIn=keyboard.nextInt();
 System.out.print("RE-ENTER VALID ARGUMENT FOR YEAR : ");yearIn=keyboard.nextInt();
 }while(!goodInput);
 }

Array
import java.util.*;
class Array
 private Appointment[] app;
 private int nElems;
 Appointment tempApp;
 public Array(int max)
 app = new Appointment[max];
 nElems = 0;
 public Array(String desc, int day, int month, int year, String sTime, String eTime)
 app = new Appointment[100];
 nElems = 0;
 public int size()
 { return nElems; }
 void add(){
 Appointment appointmentToAdd = new Appointment();
 // Read its details
 appointmentToAdd.read();
 // And add it to the studentList
 //app[nElems].add(appointmentToAdd);
 public void add(String desc, int day, int month, int year, String sTime, String eTime)
 app[nElems] = new Appointment(desc, day, month, year, sTime, eTime);
 nElems++; // increment size
 Appointment appointmentToAdd = new Appointment(desc, day, month, year, sTime, eTime);
 // And add it to the studentList
 //app[nElems].add(appointmentToAdd);
 public void insert(Appointment tempApp) {
 int j;
 for (j = 0; j < nElems; j++)
 // find where it goes
 if (app[j] > tempApp) // (linear search)
 break;
 for (int k = nElems; k > j; k--)
 // move bigger ones up
 app[k] = app[k - 1];
 app[j] = tempApp; // insert it
 nElems++; // increment size
 public void display() // displays array contents
 for(int j=0; j<nElems; j++) // for each element,
 app[j].display(); // display it
 System.out.println("");
 public void insertionSort()
 int in, out;
 for(out=1; out<nElems; out++) // out is dividing line
 Appointment temp = app[out]; // remove marked person
 in = out; // start shifting at out
 while(in>0 && // until smaller one found,
 app[in-1].getMonth().compareTo(temp.getMonth())>0)
 app[in] = app[in-1]; // shift item to the right
 --in; // go left one position
 app[in] = temp; // insert marked item
 } // end for
 } // end insertionSort()
}Menu
import java.util.*;
class Menu{
 private static Scanner keyboard = new Scanner(System.in);
 int option;
 Menu(){
 option=0;
 void display(){
 // Clear the screen
 System.out.println("\n1 Display");
 System.out.println("\n2 Insert");
 System.out.println("3 Quit");
 int readOption(){
 System.out.print("Enter Option [1|2|3] : ");
 option=keyboard.nextInt();
 return option;
}Tester
 import java.util.*;
 import java.util.Arrays;
 class ObjectSortApp
 public static void main(String[] args)
 int maxSize = 100;
 Array arr;
 arr = new Array(maxSize)
 Appointment app1 = new Appointment("College Closed", 30, 4, 2009, "09:30", "05:30");;
 Appointment app2 = new Appointment("Assignment Due", 25, 4, 2009, "09:30", "05:30");
 Appointment app3 = new Appointment("College Closed", 17, 4, 2009, "09:30", "05:30");
 Appointment app4 = new Appointment("Easter Break", 9, 4, 2009, "01:30", "05:30");
 Appointment app5 = new Appointment("College Opens", 15, 4, 2009, "09:30", "05:30");
 Appointment app6 = new Appointment("Assignment Due", 12, 4, 2009, "09:30", "05:30");
 Appointment app7 = new Appointment("Exams Begin", 11, 4, 2009, "09:30", "05:30");
 //To sort them we create an array which is passed to the Arrays.sort()
 //method.
 Appointment[] appArray = new Appointment[] {app1, app2, app3, app4, app5, app6, app7};
 System.out.println("Before sorting:");
 //Print out the unsorted array
 for (Appointment app : appArray)
 System.out.println(app.toString());
 Arrays.sort(appArray);
 //arr.insertionSort(); // insertion-sort them
 System.out.println("\n\nAfter sorting:");
 //Print out the sorted array
 for (Appointment app : appArray)
 System.out.println(app.toString());
 Menu appMenu = new Menu();
 int chosenOption;
 do{
 appMenu.display();
 chosenOption=appMenu.readOption();
 for (Appointment app : appArray)
 switch(chosenOption){
 case 1 : app.display(); break;
 case 2 : arr.add(); break;
 default:;
 }while(chosenOption != 3);
 } // end main()
 } // end class ObjectSortApp

IOS XR Layer 2 internetworking and layer 2 local switching

I have 12410 with iox 3.6.1 and sip 501 with spa-5GE I want to configure layer 2 vpns for internetworking and layer 2 local switching. I search in the command reference and I didnt find the connect command nor internetwork ip under the PW class. can any one tell me how to configure it

Hi,
Here is an example for local switching:
RP/0/1/CPU0:router(config-if)#l2vpn
RP/0/1/CPU0:router(config-l2vpn)#xconnect group local
RP/0/1/CPU0:router(config-l2vpn-xc)#p2p ac1
RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#interface gi0/3/0/0
RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#interface gi0/3/0/1
RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#commit
RP/0/1/CPU0:router(config-l2vpn-xc-p2p)#end
Any-2-Any connection type required 3.8
HTH
Laurent.

CS 4 vs CS 3 - Quick Search and Indexing Improvements???

Our firm is currently using CS3 Bridge and Spotlight for image archiving and retrieval. The indexing time is horrendous
given the volume and size of images. The Spotlight interface is not that intuitive and looking at solutions
that include upgrading to CS4. I would greatly appreciate any feedback regarding CS4 and potential
improvements with search and indexing of images.

As a big fan of Bridge I sure would advice you to upgrade to CS4 because it
is a far more stable version. However I use it not for Digital Asset
Management and I also think Bridge is still not ready for this job because
they still have no good cache management system for it.
It is an exclelent application for ingestion files, sorting, rating adding
metadata renaming and start to develop in ACR. For this I use it daily to
great satisfaction.
However I have an archive with over 40.000 files in it and I have tried to
use Bridge to index it. Not very succesful I have to confess.
I recently switched from Media Expression (before Microsoft took over it was
called iView Media Pro) to the single user version of Canto Cumulus.
Although both mentioned DAM applications are not free they are well worth
the money (Canto is a little more expensive but again worth the money)
You can get a trial version for both DAM, just try them to see which will
suit you the best.
Also download the CS4 trial, this is certainly a good investment as you will
discover after you have tried it
Over 30,000 photos.

Issue with oracle ultra search and the document.getURL() call...

I am writing a search tool using the ultra search engine in the background to make a search across an Oracle 9i database hitting various tables and columns.
The search is working great and the product is working wonderful. However, I have a slight problem. I developed the Java application that interfaces to the UltraSearch Engine using classes12.jar and nls_charset.jar - I have been recently informed that I need to use ojdbc14.jar and equivalent classes as we are developing in a jdk1.4 environment.
Now I have everything working correctly and have no issues with using the classes12.jar within a jdk1.4 environment, but when I switched to use the new drivers the document.getURL() and document.getLanguage() both return "???" as a value and before they were returning values I could parse (in the case of the getURL() call).
I have done some experimentation and found that if I remove nls_charset.jar from my classes12.jar - I don't get "???" but I do get garbled text that is unparseable so I am convinced the issue is around the charset implementation and globalization process.
I need help and I really have no idea at this point where to look and what to do? I have searched and queried every place I can and tried numerous variations but I still end up with "???" from those calls when I use the jdk 1.4 drivers?
Can someone please help or push me down another path?
Guy

user472953,
It's the driver. Try using "nls_charset12.jar" in your common/lib directory. I'd upload mine if I could, but you should be able to find it somewhere on oracle.com (hopefully).
Good luck,
- Stephen

How to add keyboard layout and define shortcut to switch layouts

Hello there people of Arch!
How can i add greek layout to my laptop and how can i set "alt+shift" as the shortcut to switch between layouts?
I tried to search but i couldn't find something useful!

Inxsible wrote:
sepuku wrote:
Inxsible wrote:What I gave you there was the guide itself.
What you gave me there is something generic not a guide(telling do "this" and "that" without telling how "this" and "that" is actually done is not a guide).Since i ask you how i'm supposed to do something am asking for specific info.
I'm using gnome.Is there a way to do it using the graphical environment?I don't have time this days to learn writing scripts cause i really need the greek layout for my studies and there's little time.
Thank you again for your reply!
Aah !!
Why didn't you say you wanted everything handed out to you on a platter !!!
Aaaah why didn't you say you are full of complexes?Thank you for your guide!That really helped me!I just asked if there's is guide in the forum 'cause i searched and couldn't find any info.And no what you gave me is not a guide.Could you just answer this without pretending the smart?Or this is just to difficult?Well anyway no hard feelings I don't care.
Am not going to reply to anything else you say cause you are ironic!I'll just wait if there is a more polite answer!
Peace to your complexes.

Add wrt54g to airport (wired) and use Linksys as switch?

I have searched and searched and have found SO MANY different things about this... but nothing that seems to help me.
I want to know if I can connect a Linksys WRT54G (v.2) to my Airport Extreme and use the linksys as a switch.
I actually bought a netgear switch that I will be using, but I was thinking of putting the Linksys after the netgear.
Modem -> Airport -> (wired to) Netgear Switch in attic -> (wired to) Linksys WRT54G near PS3, TiVo, etc.

Sure, you can do this.
The "key" configuration on the Linksys is that it must be configured in "bridge mode". You'll need to be access the web setup page for the Linksys to do this.
Once you have the Linksys configured as a "bridge", you can connect an ethernet cable from one of the LAN <-> ports on the AirPort Extreme to the WAN port on the Linksys.
If you intend to use Netgear switch ahead of the Linksys, then it would be connected to one of the LAN ports on the AirPort Extreme. From the Netgear switch, you would connect an ethernet cable to the WAN port on the Linksys. Again, the Linksys must be configured as a 'bridge" in either example above.

Using a variable in a Powershell search and replace string

Hi
a couple of days ago I posted a question about doing a search and replace with wildcards
Search and repalce with Widcards
I got a swift and very helpful answer but now I need to build on it.
In a text file I wanted to replace all the text between two defined words. the script I got was this
$text = 'Some Server this bit of text varies Language stuff'
$text -replace '(.*Server) .+? (Language.*)','$1 it will always say this $2'
It works great but now I want to replace "it will always say this" with a variable and I can't figure out the correct grammar to make this happen.
Can anyone help??
Thanks
Alex

Here's one way:
$replace = 'it will aways say this'if ( $text -match '(.*Server) .+? (Language.*)' )
{ "{0} $Replace {1}" -f $matches[1,2] }
else { $text }
[string](0..33|%{[char][int](46+("686552495351636652556262185355647068516270555358646562655775 0645570").substring(($_*2),2))})-replace " "

Searching and Noservice as I switch to 3G

Similar Messages

Maybe you are looking for