Searching Archive for Older Mac 10.4 (non Intel) Computer Lost Flash Player

Hello Forum Users!
I'm sorry to bother you, but checked recent posts and knowledge base and cannot seem to find my problem listed.
Problem starts and ends with older Mac operating system (10.4.11, Yes, I am still using Tiger and my G4 is said not to be acceptable to Leopard so its time for new computer..but until then)....
I have only a 60 GB HD, and it was getting "full" so suggestion I received and someone helped me do it, was to eliminate all old "downloads" I was saving.
Fine....except that while I was cleaning up the older programs I "don't use"  to get more room on the Hard Drive (I had less than 10 GB free and Apples don't like that on their Journal Drives), I accidentally "erased" (then threw out as trash to get room) the  Adobe Flash Player.  Not a problem!  But now of course I remember that is "why" keep normally all "downloads" as files in case I do that....so no older download to use as my own archive.
Ok, not a problem!  Go to Adobe and download a new Flash Player (Of course I can't use 10.3 and all the others you keep referring to, as I don't have an "Intel" chip operating computer, so 10.4 is supported by newer Flash Players but only those using an Intel chip which my computer doesn't have.  (Lap top else I'd try all types of modificactions to work around the problem).
Sorry too many details, but rather let you know now than questions back and forth.
The final irony is that I know of Adobe's Archives and went "back in time" downloading and testing out various Flash Players (sorry, didn't pay attention so I did not ever have marked down which version of older Adobe worked with my 10.4.11).
So I tried all the 10.2's   10.0's  9's (even the developer ones)  I hit the 8's and realized that maybe I'm not doing something right as I do think if you are using 10.3 now, that 8 versions should have been usable according to the June 2010 system requirement lists.
For downloading I select Mac  "other"  as  my operating system since the current specificaitons for downloading list 10.4 to 10.6 as  "Intel" based.
Did I leave anything out?
I really need Adobe Flash Player as most of the web sites are just refusing to display anything but words for me, so just boring now on web without access to all the content that Flash Player provides.  (no more funny You tube videos either of course!).
Can anyone help me with my Adobe problem?
Thanks!

To both of my helpers.....Success! (Skip to end if you don't want to read the details).
Sorry for the delay in responding to all of your suggestions!
eidnolb:  Here is what I found on the page with red "f" this time. But using Safari, the whole top of the page says "Flash" meaning that the red "F" is part of a Flash item that is not loading in Safari, but does load in my other Browser, Sea Monkey.
Using Safari I right clicked (was on wrong page sorry) and got the "ClicktoFlash---Settings" settings
I do not have regular "settings" anymore on my list just:   Load Flash/Load all on this page/add www.Adobe.com to whitelist/ClicktoFlash Settings.
And in the Click to Flash Settings there is no box to uncheck for hardware acceleration. Only things like Options/sIFR Text Updates Uninstall (of course) version 1.5.5 if that matters).
I set up my account in Adobe using Sea Monkey which I do when Safari is fully being used for other purposes that day, so that explains why I got confused sometimes, the Flash Content in Sea Monkey "works" but the same page loaded in Safari does not work.  I do have Firefox, but that has too many saved pages that have not been gone over to "unsave" them when I'm done either printing the contnet or saving the content or bookmarking it, so that is quite unusuable right now so I don't know if any of the flash is working or not on Firefox (and I don't have Chrome loaded in yet....maybe I read it was Leopard only? I forget why it is not
another choice for me).
Willener pat's  (finally used a mirror!)  suggestion I try the FP uninstaller again, I made sure it was done using Safari (Sea Monkey does not like it)....and despite it appearing for the higher levels of Mac OSX I tried it....
Its getting complicated. I can read the instructions how to do it in Sea Monkey, but Sea Monkey does not like the file (does not know what to do with it and offers my entire "Mac" database of applications i.e. word, etc to use it (very bad).  Safari can use the file but I have to click on it without the accompanying instrtuctions to help me as they are not visible or printable anymore from within Safari without Flash.  So I'm using the printed instrucitons from Sea Monkey to follow and Safari to do the downloading!
I'll work this out yet!
eidnolb:  I visited http://kb2.adobe.com/cps/155/tn_15507.html after uninstall as you and pat say to do.
But the message reads:
"The following displays the type of Flash Player version that this browser is running, and its capabilities.  Usually only developers creating content for Flash Player require this information: "
But Guess What?  The box is a "FLASH" item!!  So I can't see what version is in there!  (Catch-22 they call that!).
My company's Flash pages are showing up on both Safari and Sea Monkey, they pause then load even though I've not set them for "permissions" or "whitelist" on the ClicktoFlash"  because the content is created by various people and they have bad web page habits so especially I do not load Flash immediately at my company's web pages, as it can hang or cause scripts to keep working so I have to stop it.  That is why the person I deal with got me "ClicktoFlash" as just because I know how to create a web page, doesn't mean all the other ones I deal with know how!
I'm thinking at this point, should I try installing back in the  version again?  I guess no harm can come from that so I went back to eidnolb's version in original message and tried to load it in again.
Result is: nothing!
I clicked on your address in Sea Monkey and copied to safari and both don't work.  "Page Not Found" Error.
This is what I clicked on  to get the Flash installer 10.1.102.64  before!  I know it worked then, why not now?  So I'll use the copy I've downloaded before but why is the link not working now?
eidnolb: June 15, 2011 10:53 am
Flash installer 10.1.102.64 [http://fpdownload.macromedia.com/get/flashplayer/installers/archive/fp 10.1.102.64_and_9.0.289.0archive.zip] Open the archive to reveal yet more archives and multiple files. Select: flashplayer101r102_64_ubmac.dmg
By the way....reading everything that came with the installer program (it appears for developers only as archived version), it says to "restart" system after uninstall.  Maybe that is what I did not do, but I've closed and restarted my computer each time I leave so I know its been "done" in middle of writing your forum replies, I just save it elsewhere and come back to continue writing!
So closing and restarting everything had no effect.  On the Adobe Find Flash Player Version  page, I still can't "see" the box with version of Flash Player I'm currently running, as its a Flash box that does not activate. The other Adobe page with "red" F still does not show the me  "red" F just a huge "Flash" box that I can't open.
So here goes with installing again from the saved version of download (by the by I'm now down to 9.46 GB free since I've opened and downloaded so many files so many times.  Just don't know which to delete as nothing has worked yet!
Now it works! I think!
I got the "Find Flash Player Version" page and I can "see" the result
I'm using Player Version: MAC 10,1,53,64
Debug Player:  No
Opening system Mac OS 10.4.11
Video Capable Yes
Audio Capable Yes
Local File I/O Enabled: Yes
So I guess that is it!
It works !
I could have just said this part alone, but wanted both of you to see what steps I took to get it working again!  (Might be helpful to anyone else stupid enough to try to create more room by deleting any large files with unidentified names).
Which answer fits the bill for "correct" answer? I"ll click on and award points however you both see fit (10 to best answer 5 to possible answers).
I went to check on the one you (eidnolb) answered about Google Maps (I have a iPad now and always use it for my portable use of Google Maps so didn't notice anything like he mentioned, so I just went in to give a check and Safari and Google Maps are all working fine  with street views  (the orange man---does anyone have a name for him? Have a contest!).  It all works so thanks again.
Best regards to everyone!

Similar Messages

  • AirPort Extreme 802.11n for older Macs?

    Are there any plans for Apple to release some sort of upgrade for older Macs so that we can use 802.11n wireless networking?
    I have a Power Mac G5 (2.5GHz DP) and a MacBook Pro 17" Core Duo (not Core 2 Duo), so the hardware in my Macs doesn't handle the 802.11n specification. (Please note that I'm not talking about the software enabler. That's not going to work on older hardware.)
    Are there plans for new AE cards that can be swapped into the G5s or an ExpressCard 34 card for the laptop?
    (And why oh why does the UK government not allow wide channel? UK consumers are stuck with only a 2.5x speed increase, whereas US consumers get the full 5x speed increase.)
    Thanks!

    802.11n refers to a speedy wireless connection. When
    you connect with a wire, you're not using 802.11 at
    all. You're using Ethernet, and your Core Duo mac
    will connect to the Airport Extreme at 100Mbs (a
    little faster than the top speed of 802.11n). Then
    The top speed of 802.11n is considerably faster than 100Mbps. In narrow band mode, the Airport Extreme cards are connecting to AE Base Stations (AEBS) at 130Mbs. In wide band mode, 270Mbs. In theory, that makes connecting to the new AEBS device wirelessly faster than via the wired ethernet. It's a design decision that just doesn't make sense in my opinion.

  • HT201177 I cannot view some videos and participate in some websites since Adobe upgraded all to Flash 11.7. I have an older Mac G5 PowerPC (no Intel chip) running OS 10.5.8. I keep getting splash screens saying I have to update to Flash 11.7 but 11.7 is m

    I cannot view some videos and participate in some websites since Adobe upgraded all to Flash 11.7. I have an older Mac G5 PowerPC (no Intel chip) running OS 10.5.8. I keep getting splash screens saying I have to update to Flash 11.7 but 11.7 is made for those Macs with an Intel chip. I am running the newest Flash for my system. It seems all concerned should have made Flash retro-compatible for those of us with older Macs. Is there a work around to this Flash requirement short of buying a new Mac with the Intel chip?

    I'll bet you'll have better luck if you post your question in the Power Mac discussions here: https://discussions.apple.com/community/desktop_computers/power_mac
    Either that, or one of the forums at Adobe.
    Good luck.
    Russ

  • Which O/S upgrade is recommended for a MAC Book Pro17 with Intel Core Duo 2.16 GHz

    Which O/S upgrade is recommended for a MAC Book Pro17 with Intel Core Duo 2.16 GHz
    I am using os x 10.4.11.
    Do I need to upgrade to 10.5.xx? Will this platform suport 10.6.xx? If 10.6 will work do I need to install 10.5 first?
    Thanks...

    Hi. Your computer can be upgraded to either Leopard 10.5 or Snow Leopard 10.6. 10.6 will be much easier to find and will be less expensive. Leopard is not required prior to upgrading to Snow Leopard.
    Stedman

  • My mac keeps asking for a password when I try to install adobe flash player and even with the hint I

    My mac keeps asking for a password when I try to install adobe flash player. Even with the hint I'm not getting it and also tried uninstall and the same thing occurred.

    It's referring to the MAC password that you have setup.
    A software prompts for a password only when there are restrictions set on the user account for unauthorised access to system files and folders.

  • Instant Client for Apple MAC OS X on Intel x86 Available on OTN

    10.2.0.4 Database Client (+ Instant Client) for Apple MAC OS X on Intel x86 is now available for download on OTN: http://www.oracle.com/technology/software/tech/oci/instantclient/
    Kuassi http://db360.blogspot.com

    FWIW, the 10.2.0.4 releases for Win 32 and Linux x86 are also now available.
    -- cj

  • HT1338 i qualified for free mac os upgradation program but i lost the password. please help me out...

    i qualified for free mac os upgradation program but i lost the password. please help me out...
    my apple id is: [email protected]

    What password, you don't need a password... Just go here...
    https://uptodate.apple.com/UtdPrepareAction?program=Mountain%20Lion&locale=en_us

  • I qualified for free mac os upgradation program but i lost the password. please help me out...

    i qualified for free mac os upgradation program but i lost the password. please help me out...

    http://support.apple.com/kb/HE57

  • I download adobe flash player for my macbook pro, but nothing that requires adobe flash player works

    i download adobe flash player for my macbook pro, but nothing that requires adobe flash player works. i haven"t tried much, but only because i have no idea what to do.

    After you've installed Flash Player (you have to mount the disk image by double-clicking and the double-click the insatller package) restart your browser and go to youTube, for example, -> http://www.youtube.com/ - and see if the videos play.
    Call back if you need any further help.
    Clinton

  • Hi there.candy crush not loading on my mac.been playing with it via facebook.flash player is updated.please help thank you

    hi there.candy crush not loading on my mac.been playing with it via facebook.flash player is updated.please help thank you

    Have you tried uninstalling . rebooting the computer and then reinstalling?

  • Errror.printstacktrace()   in non debugger version of flash player

    Hi,
              i want to log the  run time errors occured  into data base . I am able to handle it by using try catch block.
    Using  errror.printstacktrace() method i am able to get the errror occured at the source with line no.
    Un fortunatley  errror.printstacktrace()  returns null in non debugger version.Its working only in debugger version of flash player.
    but in  production  environment we will have only non debugger version of flash player. Is any work around to  get the errror occured at the source with line no.(simillar to stack trace)
    I don't unserstand why we have to use non debugger version in production environment. Is any advantage of having non debugger version in production environment?
    Regards,
    Thiru

    Well, the non-debugger version is much faster, and, because it does not show the exception dialog it is more tolerant of run-time errors.  I don't know of any way to get more details without a debugger player.
    Alex Harui
    Flex SDK Developer
    Adobe Systems Inc.
    Blog: http://blogs.adobe.com/aharui

  • Top two best video cards for older Mac Pros?

    I have some older Mac Pro towers that vary from:
    2.66 GHz Quad Core Intel Xeon
    ..to this:
    2 x 2.93 GHz 6 Core Intel Xeon
    Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME. I just need to narrow down the unwieldy list that can be found here: http://www.adobe.com/products/premiere/tech-specs.html

    MikeJamesG wrote:
    Looking for at least the top two video cards that are tried and tested that would work best with at least Premiere Pro and AME.
    Are you adverse to using aftermarket cards that have been converted to work properly in a Mac?  If you aren't, then I'd recommend talking to Dave @ MacVidCards because he can cook you up an nVidia 700-series card that will boot properly in a Mac Pro, run at PCI-E 2.0 speeds, and work wonderfully in Pr/AME.

  • Beta available for older Mac's ?

    I see there is a Safari for those who have Windows, but those who have the older Macs are unable to update to the newest Safari?
    Why is this?
    And is there a free beta release for those with an older mac ?

    Sad that this is the case, and it doesn't explain the "why" of it... but perhaps it is like many things in life, where we have to wait until we get to Heaven to understand the difficult questions in life. haha
    Anyhow... I suppose I will live... or just use Firefox.
    Have a wonderful week!

  • Good wireless cards for older Mac Pros

    I have a Mac Pro Dual-Core Intel Xeon 2.66 GHz at work that we are trying to get online wirelessly. A couple of months ago, we bought a Hawking Hi-Gain Wireless-N USB Adaptor, which was working fine until a recent update was performed. Since then, the computer crashes almost immediately if the wireless adaptor is plugged in, but runs fine when it is taken out. I am curious if anyone else has run into a similar problem when using a wireless adaptor. I also wanted to know if anyone had a recommendation for a different, reliable wireless card for an older Mac Pro.
    Thanks in advance.

    I have almost the exact same situation.
    Same system, a d-link wua 1340 usb wireless adaptor.
    Worked fine for several weeks or so until i updated to snow leopard.
    Now frequent system crashes, grey screen and the box that tells me to use the power button to shut down.
    I tried going back to 10.5 and still the same problem.

  • Pages Converter (for older Mac files)

    Hi all.
    I have a fairly new iMac that I bought last July.  I have been using Macs for years.  When iWork downloaded with Maverics I deleted iWork 09 from my HD.  I now try to open Pages files and they say I need to re-open them with iWork 09 and save them again.  Also I can not open any of the older Claris Works / Apple Works files from my University days.  Loosing alll these files due to an update that is incompatible is unacceptable.  I still have the iWork 09 key form the disks I bought, but like I said, I have a newer iMac so no CD/DVD drive.  Can anyone help?
    Cheers

    Pages '08 files need to be opened by Pages '09, or exported to Word .doc/docx files.
    Are you sure you don't still have your older versions in your Applications/iWork folder?
    LibreOffice (free) will open a lot of oldeer files.
    Be warned that Pages 5 is very buggy and shy 100 features.
    External CD/DVD/BluRay drives are cheap from eBay, or you can open the DVD on an older Mac and make it a .dmg file in DiskUtility, then install that from a USB stick.
    Peter

Maybe you are looking for

  • Help needed in SYNCBO Creation

    Hi I have created a syncbo following the steps mentioned in MDK document. When i execute the SyncBO with the emulator i am not finding any data.The steps i followed for creating the SyncBO are  Defining the SyncBO for downloading with the BAPI wrappe

  • My browser wont open any applet

    Hi, im new at Java, i dont know almost anything about it; but im going to learn.. so i installed j2sdk1.4.0_01 and now i cant view any applet at all i always get this message: Exception:java.lang.NullPointerException. I havent program an applet yet..

  • Label Data View in Material Master

    Dear Team, Despite of performing all below standerd steps, i am not able to view Label Data view in Material Master. pls guide steps performed. 1. Check whether the screen sequence SP exists in Customizing for the Material Master under Define Structu

  • Bar Code works fine in one App Svr, but does NOT work in identical server?

    We use the FREE3OF9.TTF bar-code to generate bar codes. We tested on this http://www.freeimagehosting.net/uploads/7c901bc198.gif development environment and it works fine. Problem is, when we install the font and report in the live environment, which

  • SAP Netweaver 04 SP16 deployed with Xalan 2.60 or Xalan 2.70

    SAP Netweaver 04 SP16 deployed with Xalan 2.60 or Xalan 2.70 Have you tried to port and run (Sneak Preview)  SAPNetWeaver java 04 SP16 or 04S SP7 with a later version on Xalan version 2.60 or Xalan version 2.70 along with jdk 1.4.2_(8 or greater)? Wh