Searching contact with hyphen doesn't work

If i try to search a contact with hyphen in the name or first name, i cannot find the contact if i search with the text just behind the hyphen.
Is it a known bug ?
Example : "Dupont Jean-Marc" cannot be found with Marc !!!

I just checked my version of OS, and it is Mac OS X 10.7.1
is there any problem with it to use searching?

Similar Messages

Skill Search works fine from search center, but it doesn't work from Lync client

My environment consists of Lync Server 2013 and SharePoint Server 2013.
I configured skill search and it works fine from search center, but it doesn't work from Lync client. An error appears says"error occurred during the search, please try again".
I configured these URLs in my client policy
set-csclientpolicy -identity global -spsearchinternalurl http://<Sharepoint Server>/_vti_bin/search.asmx
set-csclientpolicy -identity global -spsearchcenterinternalurl http://<Sharepoint Server>/searchcenter/pages/peopleresults.aspx
I checked these URLs from the browser and they work fine.
I disabled anonymous access to _vti_bin, but no change then i checked lync log but i didn't find any error then i used Wireshark and found that when Lync client contacts Sharepoint, Sharepoint responded to it with internal server error http 500
Please advice for what to do

Hi,
Thanks For your sharing.
Best Regards,
Lisa Chen
Lisa Chen
TechNet Community Support

Cropping pictures with Viewer doesn't work.

Cropping pictures with Viewer doesn't work.
Selecting < or ~ 12 pictures. (picture size are Snapshots with iphone resolution) ->Viewers opens and display them. -> Russian roullette between cmd+k or the little crop button. No indication which one will process a crop or which not. -> Both result in picture selection disappear with no crop.
Selecting > 12 pictures. (picture size are Snapshots with iphone resolution) -> Viewer opens and display them. I crop them one by one with same Russian roulllette behavior between cmd+k or the little crop button. -> Closing Viewer. -> Pictures remain like they've been before. Not cropped.

I just tried what you described (although I can't really fathom why you would describe it as Russian roulette (with a variable number of L's). Unless you've been drinking a lot, which is what people are usually doing when they are playing Russian roulette. Your post was hard enough to decipher without that.
Anyway, my cropping was saved each time. I think there's something wrong with your Preview.app. Have you changed anything about the autosave functions of OSX?
I would try:
Boot into your recovery partition (restart, hold down ⌘R until you see the Apple logo), and use Disk Utility to repair your hard drive. Repair permissions too while you're there. OS X: About OS X Recovery
if that doesn't help, then I'd reinstall Mavericks over your current installation.

After upgrade to IOS 8.3 sync with iTunes doesn't work

After upgrade iPhone 6, iPad Air to IOS 8.3, the sync (over wifi, as well) to iTunes doesn't work anymore.
On iMAC iTunes, the last sync's hour and day appear different from what is recorded on mobile devices (iPhone and iPad); with IOS 8.2 and the previous iTunes' version the sync worked correctly: the dates are the same only for few seconds after syncronization, then the IOS devices show the syncronization's dates related to two weeks ago.
Thanks

you'll need to contact your carrier.

Need to back up contacts but touchscreen doesn't work

I have a Samsung Brightside that the touchscreen doesn't work. i want to back up my contacts and can navigate to the Media Center by the slide keyboard but can't go any further

Have you had a chance to look at this troubleshooting page? If not, have a look at the bottom section that covers what to try if the message keeps reappearing: iTunes has detected an iPod in recovery mode - Use iTunes to restore
Towards the end it says "If after restoring your iPod, the message described above reappears, the iPod drive letter may need to be reassigned. See the "Change the Drive Letter" section of this document for steps to assign a different drive letter" which contains a link to this article: Windows confuses iPod with network drive

Synchronization of tasks and interaction logs with Outlook doesn't work

Dear SAP Experts,
I'm workink on CRM 7.0 (release 7.7.06.010).
We are trying to make the synchronization of activities, contacts and tasks from our CRM system to Microsoft Outlook.
It's working fine for the contacts and for the Apointment BP visit (transaction type Y020).
But no synchronization made for others activities (interaction log Y007 and telephone calls PCAL) or BP Tasks (Y030) we created in the system.
We just applied today SAP Note 1415263 and Groupware Integration 3.057.
I made the settings in the CRM Calendar tab in Outlook (with synchronization from CRM to Outlook), and checked apointment, contacts and tasks.
In customizing (CRM > Transactions > Basic settings > Define transaction types), I flagged for the following transaction types the little 'Calendar' box: Y020, Y030, Y007 and PCAL.
In another entry (CRM > CRM Middleware and related components > Settings for client-based synchronization), I indicated the transaction type Y020 for DEFAULT_APPT_PROC_TYPE and Y030 for DEFAULT_TASK_PROC_TYPE.
Any idea about what is missing or not already done?
Any help will be apppreciated.
Thanks in advance for your help,
Kind regards,
Grégory KREMSER
Edited by: Grégory Kremser on Feb 3, 2010 3:13 PM

We don't have a CAS array set up. We want the fail over to be fully manual and only fail over to another server when mb1 is in a completely failed state and won't be back up and running withing a set time frame. We can get everything working
on MB3 and only Outlook doesn't work when everything is on MB2. Outlook also doesn't work if databases are on another server and DNS is pointing Outlook to MB2 (again MB3 works fine).

[SOLVED]Something wrong with Locale, "ÅÖÄ" doesn't work in terminal.

If you have this kind of problem stated above in the title, or similar, here is what I did...
Make sure you have correct locale, you'll need a UTF-8 one.
As stated in the install guide(or beginner's guide iirc) do the following:
Uncomment one of the locales in "/etc/locale.gen", it doesn't have to be language pacific if you're only after using UTF-8 which provides more characters than normal ASCII.
then run "locale-gen". Make sure to set your "/etc/locale.conf" to "LANG=en_US-UTF8" of course you can choose whatever locale you want not just "en_US-UTF-8". After that make sure to reboot, it may also work with just log-out and log-in again, but I did not reboot and neither log-out and when back in. If it still doesn't work, run "locale" and "locale-a" if the output is "C" in each column just redo what I stated above, if it still not work, then you have to consult the manual, wiki and if you don't find the problem use a search-engine and if you still don't find answer here on the forums, the people here is really helpful!
Last edited by kalle97 (2012-10-01 17:46:16)

" Okey I uncommented sv_SE.utf8 in /etc/locale.gen ...
You're supposed to uncomment "sv_SV.UTF-8 UTF-8", then run locale-gen (with sudo), not "sv_SE.utf8".
That's what I did.
https://wiki.archlinux.org/index.php/Be … ide#Locale
^ Except that you shouldn't use "echo" in this case. That command works well when you're logged in as root, but for sudo, not so much. Check the file with nano and you'll see that nothing changed. For sudo, use tee.
$ sudo tee /etc/locale.conf <<< "LANG=en_US.UTF-8"
Note: You don't necessarily need "sv_SV" for those characters to show up. Setting a "sv_SV" locale would make programs show up in Swedish instead of English - unless that's what you want. UTF-8 locales will cover those characters just fine (provided that the font from the terminal actually contains those glyphs, of course).
So you mean I can have en_US.UTF8 as locale but still write swedish letters? So the problem is with the font or somthing, not the locale?
If you still have problems, post the output of:
$ ls -l /etc/profile.d/locale.sh
$ curl sprunge.us -F sprunge=@/etc/locale.gen
$ curl sprunge.us -F sprunge=@/etc/locale.conf
$ locale -a
$ locale
Well, I did as the guide told about locale.conf, it doesn't seem to work, even if "locale" outputs correct info now, but I'll try with restarting the X server too, just in case.....

Country list dropdown search by first letter doesn't work for some countries in the list

Hi,
We have this issue with the country list search in Travel Request with the drop down list when user is trying to choose the country by entering the first letter say C for Canada (finds Canada in the list) it works for the countries from A to O and doesn't work from P to Z.
It is NW7.31 portal
What seems to be the problem ?

Hi Denis
Get them to take a look at this wiki page:
http://wiki.scn.sap.com/wiki/x/2oQCFQ
It lists the latest notes for your basis version and the notes are usually cumulative which means if you apply the latest notes, it will bring in the pre-requisites and earlier notes too.
Hope it helps you Denis.
Sally

Dropdown country list search by first letter doesn't work for some countries in the list

Hi,
We have this issue with the country list search in Travel Request with the drop down list when user is trying to choose the country by entering the first letter say C for Canada (finds Canada in the list) it works for the countries from A to O and doesn't work from P to Z.
It is NW7.31 portal
What seems to be the problem ?

Hi Denis
Get them to take a look at this wiki page:
http://wiki.scn.sap.com/wiki/x/2oQCFQ
It lists the latest notes for your basis version and the notes are usually cumulative which means if you apply the latest notes, it will bring in the pre-requisites and earlier notes too.
Hope it helps you Denis.
Sally

Can't search contacts + Google synch does not work

(1) The search field in contacts does not work. I have to go the phone app, find the person in there, then open up the contact from the phone app.(2) I have synched Google contacts with the phone's contacts. Updates to the phone's contacts transfer across sometimes immediately, but sometimes the phone goes for one month without synching. No manual sync is possible. Basically every time I want to sync a single contact for sure onto Google and onto other devices I have delete the account and reload it. Are there solutions to either of these problems?

Refunds from the App Store or iTunes Store

Printing PDDoc with AFExecuteThisScript() doesn't work after an upgrade from SDK 5 to SDK8

Hello,
I have made an upgrade of my plug-in which was developed with the Acrobat 5 SDK. I upgrade it to Acrobat 8 SDK and my print function doesn't work anymore.
Actually I print my document using a javascript trusted function instead the function provided by the C++ library for internal reason.
Here below is the code used to print my document :
char szJavaPrint[6000];
sprintf(szJavaPrint,
"pp = this.getPrintParams(); \r\n"
// fill pp with parameters
"pp.interactive = pp.constants.interactionLevel.silent; \r\n"
"\r\n"
"this.trustedPrint(this, pp);"
PDDoc pdDoc = AVDocGetPDDoc(avDoc);
AFExecuteThisScript(pdDoc, szJavaPrint, NULL);
It was working with the Acrobat 5 SDK but the print seems to have no effect using the Acrobat 8 SDK. I know that there is a change between Acrobat 5 and 8 concerning the Character Set (currently I set the Character Set to "Not Set" in the Configuration Properties of the project) but I don't think that my problem comes from the Character Set.
All ideas to resolve this problem are welcome.
Kind regards,
Joe

See what happens if you remove the "setting of interactive to silent"...
There is a restriction on silent printing in Acrobat, but I would not have expected that to be passed into this method - but it could have been overlooked and be a bug.
Also, I don't recall a trustedPrint() method in Acrobat JS - check the documentation for the correct name of this function...

Synching contacts with Outlook does not work

I have a Mac (with the contacts application), an iPhone and an iPad as well as an iCloud account. Synching contacts between all 4 of them works perfectly. However, synching contacts with Outlook 2011 does not work anymore. It used to, then I had some trouble with the synching with the iCloud (due to the fact that I had to change the Apple ID from the one I use for iTunes to the one I use for the Cloud), and since then contacts do not replicate with Outlook anymore. I can deactivate and reactivate the synching in Outlook as much as I want, no change.
Any ideas? Thanks!

So it sounds like you have contacts from multiple mail accounts syncing to/from your iPhone. They will all appear there as long as their respective accounts are checked under contacts/groups(upper left of contact screen).
As far as contacts created on the iPhone, if you select Outlook as your default account for contacts, all contacts created on the iPhone will sync with Outlook. I'm assuming your Outlook syncs with an Exchange Server.
You could connect the iPhone to iTunes and sync all of your contacts to say, a desktop version of Outlook. You could then import that set of contacts into the Exchange version of Outlook.

Fit the window with mouse doesn't work after new update 10.9.2

Hi, I could fit a windows using my mouse wheel or two finger(on trackpad), doesn't work after I set up new Mavericks update(10.9.2) I'm using Haswell rMBP. Can anyone help me please? Thanks a lot. (Also, minimize with mouse wheel doesn't work too.)

Doesn't anyone having this issue?

Using search in iCloud email (Doesn't work well)

Hi everyone,
I'm having problems with the search feature in iCloud email. I rely on searching for dates and other topics for my work. I get so many emails the search feature is critical to my work. It's gotten to the point that I forward every email that goes to my iCloud email address and have it also sent to my gmail account just so that I have a more reliable means of searching(big inconvenience!). I'm wondering if anyone else is going through the same thing.
An example search that I would do is search for "2012-10-21." This is a specific date format that my work uses when they email me. In the beginning of iCloud, the search would easily work and return the proper search results. Now, the search/results are pretty useless because it does not work at all.
It's very frustrating. As of now, iCloud isn't really good for the business professional if it can't perform simple searches and return proper results.
It's Gmail for me right now until iCloud get's fixed.
-Lionel

can't confirm

Web address with hyphen will not work in PDF

CS 4; ID 6.0.6
OSX 10.5.8
In ID, I create web links by selecting a url and then selecting New Hyperlink From URL. The new link is a Shared Destination by default with the web address as was selected. These links work fine when exported to PDF.
When I use the same process on a url with a hyphen (part of the address and not a line break), the resulting Shared link will not work when exported to PDF. The newly created link in this case always begins with file:///Users/.
What is it about the hypen that messes up the process? I work in a bilingual government so we have a lot of urls with hyphens in them. For example: www.cga-nb.org.
Thanks.

SWSinNC wrote:
I will, thanks
so your saying that if it's fake...that specific function is a common flaw ?
Exactly!
Unfortunately the full thread recounting this saga got lost in the forum changeover, but the fake copies come in authentic looking shrink-wrapped boxes with printed documentation; and everything works except the nudge.
Or sometimes other keyboard combinations.

Searching contact with hyphen doesn't work

Similar Messages

Maybe you are looking for