Searching entire database

i love sqldeveloper. am moving from oraedit. however oraedit had a search database feature. it would search pl/sql functions, triggers, procedures,etc fort a string and return each occurrence and the line number of the module where found. you could then click on the line number you wanted and it would open the source into an editor.
not asking for all of that but would like to be able to search the entire database for a string.
is this possible?

Alessandro,
I have yet to replicate K's buggy report search for text. However, there is a limitation in the current release that if you use the shipped report to find your text, in that it goes to the top of the code which contains your string. In the next release the report will go to the lin of code that contains your string. So that bug has been fixed.
In the next release we are also providing a more detailed search capability to allow users to search for columns in tables and strings in code, in addition to the current search which looks for objects in schemas.
Sue

Similar Messages

  • Mail will no longer search "Entire Message". That option is grayed out. Why?

    How do I get Mail to search "Entire Message". That option suddenly is grayed out.

    A SMTP is a server for sending messages, and not as an Incoming server.  Do you mean an IMAP server?
    I did not mean it was for a single message, but the fact that you had a single message in local storage turned the option on, but it could only have search the messages that were in local storage.
    Check again in Mail Preferences/Accounts/Advanced what is selected regarding Keep copies of Messages?
    Ernie

  • My iTunes keeps crashing.  I have uninstalled and reinstalled, including recreating the entire database, and it is still doing it.  I recently upgraded to 10.5.  Any ideas?

    My iTunes keeps crashing.  I have uninstalled and reinstalled, including recreating the entire database, and it is still doing it.  I recently upgraded to 10.5.  Any ideas?  I am running Windows 7 on a new, decent, laptop.  The music is on the laptop's hard drive.  There is plenty of hard drive space left.
    iTunes starts fine, and I can do stuff, then within a minute or two or three it gives me an error message pop-up. 

    The error message says:
    iTunes has stopped working.
    Windows can check nline for a solution to the problem.
    -> Check online for a solution and close the program
    -> Close the program
    Problem Event Name:          APPCRASH
      Application Name:          iTunes.exe
      Application Version:          10.5.0.142
      Application Timestamp:          4e9243f2
      Fault Module Name:          MSVCR80.dll
      Fault Module Version:          8.0.50727.6195
      Fault Module Timestamp:          4dcddbf3
      Exception Code:          c0000005
      Exception Offset:          0001500a
      OS Version:          6.1.7601.2.1.0.768.3
      Locale ID:          1033
      Additional Information 1:          0a9e
      Additional Information 2:          0a9e372d3b4ad19135b953a78882e789
      Additional Information 3:          0a9e
      Additional Information 4:          0a9e372d3b4ad19135b953a78882e789
    I've chosen both items, neither does anything but close the program.  This problem is new with iTunes 10.5; I did not have it before. 

  • "search entire message" button in mail is sometimes grayed out

    Hi, Recently I've noticed that sometimes when I do a search in mail the button to search entire message is grayed out and unclickable.  This started happening in the last few days.  Just a minute ago I tried to do a search and the button was gray, then I went to Safari and logged into Apple support, went back to mail and typed a new search, and all of sudden the button is clickable again.  Any ideas?  Running 10.6.7 on a 15" Macbook Pro.  Thanks...

    Ernie,
    I collected the info you require - see below. Along the way I deduced that the problem may be a corrupted Spotlight index. As you'll see below attempting to remove Library or Mail from the index failed. I am currently rebuilding the entire volume index...
    Repair permissions - log shows no fixes. Search still fails...
    POP-<email> varies from 14.7MB down to 120kb.
    Typically the root level of POP-<email> is
    Deleted Messages.mbox
    Sent Messages.mbox
    Drafts.mbox
    INBOX.mbox
    Junk.mbox
    Some account also have "MessageUidsAlreadyDownloaded2"
    The root level of INBOX.mbox is typically:
    Info.plist [not always]
    Messages
    POP-steve%[email protected]
    has top level
    Deleted Messages.mbox
    Drafts.mbox
    INBOX.mbox
    Junk.mbox
    MessageUidsAlreadyDownloaded
    MessageUidsAlreadyDownloaded2
    Sent Messages.mbox
    with INBOX.mbox top level of
    content_index
    Info.plist
    mbox
    mbox.SKindex
    mbox.SKindex.isValid
    Messages
    tableofcontents
    I deleted the out of date indexes, etc.
    Spotlight prefs, Privacy, add ~/Library/Mail
    "Privacy List Error
    The item couldn't be added or removed because of an unknown error."
    Same Mail operation worked on MBP -- also on MBP Library folder.
    Try MacPro Library - same error.
    Delete entire MacPro index. More to follow on whether this is the fix...

  • Mail search won't search Entire Message

    When I type anything into the search bar in mail, and have it select to search Entire Message, it won't find anything. Even if I only type 2 characters, it won't find it.
    In the SpotLight System Preference, I tried adding the whole drive to the privacy pane and then removing it.

    I had this problem too - I can't believe that now at 10.5.8, Apple STILL haven't sorted this out.
    I have eventually managed to get search back again (don't want to speak too soon though). Among other things, I did mdimport ~/Library/Mail following the advice in http://discussions.apple.com/message.jspa?messageID=5934412#5934412. However, I don't know if this actually had any particular effect, as Spotlight seemed to start a new index run after I had done this (which presumably would override the effects of the specific import).
    I have tried most things mentioned - rebuild mailbox, delete Envelope Index after quitting Mail, all sorts of variants of turning Spotlight or different volumes to be indexed or not on or off.
    I have not tried (because I don't think they are likely to have any effect) deleting the preferences, switching off and on again, resetting PRAM etc.
    I have tried searching for duplicate Mail copies, and searching for .metadataneverindex and disk utility checking permissions on the volumes and manually on the mail folders, and checking by looking that the mail folders are not packages, but come on, I don't think any of these are likely.
    Personally, I think it was the virgin sacrifice that fixed it.

  • Moving a Entire Database

    Does any one out there know of a easy way to copy a entire database from a working copy to a freshly installed copy. I currently have about 5 table spaces and about 5 users with all there schema and data, and I would like to move it from my windows server to a linux server, same version of oracle 10g. I know where alot of the files are and I know the ctl file will add the database, but I am not sure if it is really that easy or what is the best way.
    Thanks in advance for any help.
    Todd

    Since you are using 10g, you may consider to use Oracle's Transportable Tablespace feature. It works now (some restrictions) even if the platforms are different.
    This document describes all necessary steps (an extract from 10g Administrator's Guide).
    http://download-west.oracle.com/docs/cd/B14117_01/server.101/b10739/tspaces.htm#i1007169
    Using dbconsole and/or GridControl simplifies the tasks.There's an option 'Cloning a database' available.

  • Spotlight / search entire message stopped working!?

    Hi, whenever I type anything into the search bar, and I have 'entire message' selected, it ALWAYS returns 0 results.
    Even when it blatantly should.
    Any ideas folks?
    thanks in advance
    Gwyn
    xxxxxxxx

    Telling Spotlight to re-index the disk might have solved your problem:
    Re: Search Entire Message Not Working After Fresh OS Install
    Deleting anything shouldn't have to be necessary. If it "fixed" your problem it could be just because that caused Spotlight to update the index accordingly.
    What is weird about the other thread Ernie was referring to is that Mail couldn't find messages that Spotlight could, which I still don't know whether was also your case or not. I troubleshooted a similar case a few weeks ago, which I believe was caused by permissions issues. Unfortunately, the OP didn't provide feedback as to whether what I suggested there fixed anything or not:
    Spotlight non-functional

  • Search Server Database problem

    Hi,
    I have a problem with a creation of a new search server database. (I use search1 default search server )
    The command that I used is:
    psadmin create-search-db -s search1 -u amadmin -d defaultand the log response is:
    [#|2008-08-29T01:02:24.518+0200|GRAVE|SJS Portal Server|debug.com.sun.portal.search.admin.mbeans|ThreadID=210
    ; ClassName=com.sun.portal.search.admin.mbeans.Database; MethodName=create; |Error: Creating database default failed with 1|#]
    [#|2008-08-29T01:02:24.521+0200|GRAVE|SJS Portal Server|debug.com.sun.portal.search.admin.mbeans|ThreadID=210
    ; ClassName=com.sun.portal.search.admin.mbeans.Database; MethodName=create; |Exception
    com.sun.portal.admin.common.PSMBeanException
            at com.sun.portal.search.admin.mbeans.Database.create(Database.java:400)
            at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
            at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
            at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
            at java.lang.reflect.Method.invoke(Method.java:585)
            at com.sun.jmx.mbeanserver.StandardMetaDataImpl.invoke(StandardMetaDataImpl.java:414)
            at com.sun.jmx.mbeanserver.MetaDataImpl.invoke(MetaDataImpl.java:220)
            at com.sun.jmx.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:815)
            at com.sun.jmx.mbeanserver.JmxMBeanServer.invoke(JmxMBeanServer.java:784)
            at com.sun.jdmk.interceptor.DefaultMBeanServerInterceptor.invoke(DefaultMBeanServerInterceptor.java:203)
            at com.sun.jdmk.interceptor.MBeanServerInterceptorWrapper.invoke(MBeanServerInterceptorWrapper.java:512)
            at com.sun.portal.admin.server.PortalServerLoggingInterceptor.invoke(PortalServerLoggingInterceptor.java:446)
            at com.sun.jdmk.interceptor.ForwardingMBeanServerInterceptor.invoke(ForwardingMBeanServerInterceptor.java:357)
            at com.sun.portal.admin.server.PASAccessControlInterceptor.invoke(PASAccessControlInterceptor.java:72)
            at com.sun.cacao.agent.DispatchInterceptor.invoke(DispatchInterceptor.java:736)
            at com.sun.cacao.agent.auth.impl.AccessControlInterceptor.invoke(AccessControlInterceptor.java:618)
            at com.sun.jdmk.JdmkMBeanServerImpl.invoke(JdmkMBeanServerImpl.java:764)
            at com.sun.cacao.common.instrum.impl.InstrumDefaultForwarder.invoke(InstrumDefaultForwarder.java:106)
            at javax.management.remote.generic.ServerIntermediary.handleRequest(ServerIntermediary.java:280)
            at javax.management.remote.generic.ServerIntermediary$PrivilegedRequestJob.run(ServerIntermediary.java:951)
            at java.security.AccessController.doPrivileged(Native Method)
            at javax.management.remote.generic.ServerIntermediary$RequestHandler.handleMBSReqMessage(ServerIntermediary.java:727)
            at javax.management.remote.generic.ServerIntermediary$RequestHandler.execute(ServerIntermediary.java:629)
            at com.sun.jmx.remote.generic.ServerSynchroMessageConnectionImpl$RemoteJob.run(ServerSynchroMessageConnectionImpl.java:266)
            at com.sun.jmx.remote.opt.util.ThreadService$ThreadServiceJob.run(ThreadService.java:208)
            at com.sun.jmx.remote.opt.util.JobExecutor.run(JobExecutor.java:59)
    |#]I have the same problem using web console administration
    thanks in advance
    best regards

    Hello,
    I am not sure on below thing, however what userid do you use while logging to psconsole.
    i think might resolve the problem by using the same id in command line.
    I have the same problem using web console administrationI think u r trying to say is psconsole not the web console admin. right?
    regards,
    sumant

  • Visual search unable to search entire catalog from within folders

    Photoshop Elements used to let you search your entire catalog while looking at photos in folders.  That option does not seem to exist now.  Is there a way to get this feature back, or a workaround to use it?  I have over 800k photos and growing on my system.  For example all my files are sorted by yyyy-mm-dd, I used to be able to be looking at "x" photo in folder 2002-01-05 and tell it to search entire catalog for visually similar photos.  I've seen "x" photo in a different folder and want to search catalog for the duplicate.  The only way I have found to do this now is through import batches--that's like finding a needle in a haystack with all the photos I have.  That was a great feature as I had been able to date photos that I didn't know date on because of the visual similarity option and find duplicates easily.
    Thank you,
    Photoshop Elements 12, Windows 8.1 system at the moment.
    The option was in the preferences section, you could search just that folder or entire catalog.

    Sorry I did not respond as I do not appear to be receiving notifications.
    I have been doing some more testing around this and find that files over 10gb tend to fail almost immediately where as a 2gb file will get 1/4 of the way through.
    My work around is my server has apache ftp server running on it so I use FTP at present (filezilla client). This yields positive results every time and the 10gb file completes in about 4 minutes with mean average speeds of ~20MiB/s (sometimes exceeding 60MiB/s
    depending on other network activity) utilising 20-50% of my NIC capability.
    There is obviously no issue with disk access or network performance, it appears to be an issue with the copy/paste functionality of Windows 7 itself rather than the use of any APIs by other applications.
    I ran the 2 concurrently today and I was seeing much slower transmit times when it was running using windows copy/paste (5-10MB/s) however resouce manager was showing network usage of 30%. Could it be a TCP/IP timeout issue where copy/paste is using an unrealistic
    value?
    Another run shows copy/paste using an expected amount of 20% while processing at 18MB/s. Still failed.
    Thanks

  • Designer and Reverse Engineering Entire Database

    Does anyone know of any good papers, books, articles, etc to help out with Designer. I really am having trouble finding anything.
    What I am trying to do is capture an entire database into a new repository and I am plagued with errors. I'm a developer and really weak with Designer knowledge. I also want to find information on how I should organize my repository. Should each schema have its own application system folder if the schemas share/link information between one another?

    Hi,
    One book that I have always found good is the Oracle Designer Handbook by Paul Dorsey and Peter Koletzke. Although it's a bit long in the tooth now (only goes upto v6 I think), it's still very useful.
    The Oracle Designer Product Info link is at http://www.oracle.com/technology/products/designer/index.html
    What sort of errors are you getting? I presume you either have a live connection to the database or the DDL?
    Without knowing the contents of your schema, it usually makes sense to group each one into its own application system, subject to the number of tables, etc. If you have tables which are referenced by other schemas, they can be put into one application system and shared to the other application systems as applicable.
    Try and let us know a bit more about what you're trying to do.
    rgds, Antony

  • Is it possible to copy entire database when update from 32 bit to 64 bit?

    Just want to update the os from 32bit to 64bit with Oracle9i. Sinece the data amount is very large, to export and import is quite time consuming, so Is it possible to copy entire database? Or any other suggestion?

    what's the OS ?
    You can check metalink doc, for example this one
    Subject: How to convert a 32-bit database to 64-bit database on Linux?
    Doc ID: NOTE:341880.1
    or
    Changing between 32-bit and 64-bit Word Sizes
    Doc ID: NOTE:62290.1

  • Restore entire database..why RESETLOGS

    Hi
    I have a consistent RMAN backup.I wanted to restore it to another server.my goal is replicating exactly what i have on my server to other.I dont require duplicate command..its just a question of asking why what i have done is not working .Rather why this procedure is not working.
    Steps follwed are Restored entire database.
    Now I have verified checkpoint_scn in controlfile and datafile headers are exactly same.So no Media recovery required.While recovering databsae is is asking me to use backup controlfile and while opening database it wants me open RESETLOGS.
    When Checkpoint_SCN is in sync everywhere and i dont change db_name ,why it asks for RESETLOGS.Rather how it or where from it come to know that controlfile is restored.
    I thoght may be REDO log files are not present so it might have identified.I have REDO log file copies so i copied and tried but same thing happened..RESETLOGS
    if i copy datafile,controlfile and REDO logfile with OS command,i a
    was not aked for RESETLOGS or backup controlfile while recovery and open database.
    But in case of RMAN why and how it asks for RESETLOGS.I have everything in place as it is but why shoul i do RESETLOGS.

    Now I have verified checkpoint_scn in controlfile and datafile headers are exactly same.So no Media recovery required.RMAN doesn't backup Online Redo Logs. RMAN wouldn't then, be checking Online Redo Logs.
    Say you have this scenario :
    At Time t1, cold backup of datafiles and controlfile
    Current Time is t3 and Online Redo Logs are available
    What is restored is the datafiles and controlfiles from t1 and the online redo logs from t3.
    Is such a scenario possible ? YES.
    (eg. your database crashed at t2 and all datafiles and controlfiles were lost, but the online redo logs are available -- probably because they were mirrored).
    Can/should Oracle do an OPEN without a ResetLogs ? Obviously not ! A ResetLogs is necessary here.
    But what if you had restored Online Redo Logs of t1 with the database of t1 ? If the controlfile is not of the same point in time, Oracle still cannot be sure that the Online Redo Logs are the "current" ones. Oracle has to assume and do an Incomplete Recovery. This has to be followed by an OPEN RESETLOGS.
    While recovering databsae is is asking me to use backup controlfile and while opening database it wants me open RESETLOGS.RMAN wouldn't be "asking .. to use a backup controlfile". It seems that you are using the SQL RECOVER DATABASE command. If a BACKUP CONTROLFILE is used, an OPEN RESETLOGS is required. That is mandatory because Oracle cannot trust the controlfile (which it , by definition, would assume to be not "current") to have the latest information.
    When you do a non-RMAN backup and Recovery, the ALTER DATABASE OPEN is issued from SQL. This checks the Online Redo Logs. If it finds that the Online Redo Logs are as of t3 but the database files, even consistent, are as of t1, then it will complain and require an OPEN RESETLOGS.
    if i copy datafile,controlfile and REDO logfile with OS commandIf this is cold copy, then it doesn't require Recovery. If all three sets of files are consistent, than an Open ResetLogs is not required.

  • Delete entire database i m using oracle 11g enterprise version

    Hi,
    I want to delete entire database from my laptop, actually I have installed 3 databases Oracle11g, I want to delete all of them . I have deleted it from registry but also its not totally deleted from my system.

    Hello,
    I want to delete entire database from my laptop, actually I have installed 3 databases Oracle11g, I want to delete all of themIn fact there are 2 things, the Databases and the Software.
    If you intend to DROP the Databases, and if these Databases were created by DBCA, you may use DBCA to DROP them. If the Databases were created manually you have the DROP DATABASE statement as follow:
    http://download.oracle.com/docs/cd/B19306_01/server.102/b14200/statements_8009.htm
    About the Software, the answer depends on the Oracle Release.
    In Oracle *11.1*, OUI let you deinstall the Oracle installation.
    In Oracle *11.2*, you need to use the Oracle De-install Utility (11.2.0.1.0) for Microsoft Windows.
    Hope this help.
    Best regards,
    Jean-Valentin

  • Clone entire database and import to other db

    how can i clone the entire database and import to another oracle database but in different server by using software of SQL Development? (include table structure & package)

    It's also not clear what you want to do. At one point you say "clone database" and in your follow-up post "clone table".
    Using either conventional or data pump export/import to clone a table or schema can be pretty easy. But cloning a database using those utilities is much more difficult. There are tonnes of things in the database that even a FULL exp/imp doesn't pick up on and move. I've posted a list of that in the MOS community.

  • Gathering Entire Database Structure

    Hi Geeks,
    I want to gather the entire database structure for our client database, which is outside of our country and it is impossible to send the export dump file since so many formalities are there. I need to gather the information, but not through export dump file. I don't need the datas, but only the structure from A-Z.
    Is there any possible way to do it.
    Kindly help me.
    Thanks,
    Bang.

    Hi,
    If i understood your question correctly then can use RMAN if you have the access. invoke "show schema" command to know the structure of your Database; Eg in my case:
    C:\Documents and Settings\smuthalagan>set oracle_sid=test
    C:\Documents and Settings\smuthalagan>rman
    Recovery Manager: Release 10.1.0.2.0 - Production
    Copyright (c) 1995, 2004, Oracle. All rights reserved.
    RMAN> connect target
    connected to target database: TEST (DBID=1915532430)
    RMAN> report schema;
    using target database controlfile instead of recovery catalog
    Report of database schema
    File K-bytes Tablespace RB segs Datafile Name
    1 460800 SYSTEM *** E:\ORACLE\PRODUCT\10.1.0\ORADATA\TE
    ST\SYSTEM01.DBF
    2 30720 UNDOTBS1 *** E:\ORACLE\PRODUCT\10.1.0\ORADATA\TE
    ST\UNDOTBS01.DBF
    3 245760 SYSAUX *** E:\ORACLE\PRODUCT\10.1.0\ORADATA\TE
    ST\SYSAUX01.DBF
    4 5120 USERS *** E:\ORACLE\PRODUCT\10.1.0\ORADATA\TE
    ST\USERS01.DBF
    5 153600 EXAMPLE *** E:\ORACLE\PRODUCT\10.1.0\ORADATA\TE
    ST\EXAMPLE01.DBF
    RMAN>
    Thanks
    --Raman                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                           

Maybe you are looking for

  • Header information not getting displayed in the lines

    Hello Everyone I have a very basic question - its very simple but not working for me with so many attempts My XML structure looks like this . In the RTF , I have header information and then a table for line information looping through G_LINES. IN thi

  • How can I change the "From:" field in iOS Mail?

    This is a weird one. I have a gmail work email account that has been set up for me. There's a primary email address assigned to it, and a secondary one (which is the one I want to use). No problem at all sending from the secondary account on my MacBo

  • HT204053 using multiple apple ID's

    Should a family with multiple apple devices all use the same apple id in order to put music downloads and AP's all all devices?  We currently have 3 iphones, 1 ipad and 2 ipods!  we manage this with playlists but what about AP's?  We manage the music

  • Force repricing on SO at change of non key partner

    Hello, We have a scenario where we are partly basing pricing on if there is a sales agent partner function (custom defined) on item level on the SO. We have added the fields to the condition tables etc and the pricing works fine. However I want to tr

  • IMac as a display.

    I connect my macbook (mid 09) to the latest 27" imac via mini display port to mini display port and nothing happens. Does anyone have a way round this? Screen share only gives me a small portal to work in.