Searching for a folder in document library doesn't work properly if the folder is at the root level.

Hi,
I have a folder named FS0 on my sharepoint 2013 site. The folder is the first level folder under
Default Document library (Shared Documents). When I search for FS0 on the sharepoint site, the search result give a link to home.aspx and not the folder. If I search for any folder that is a second level folder in the library, I get a search result that takes
me inside the folder on clicking it. In my case, I search for a folder named FS1 which directly under FS0. The search result takes me inside FS1 in this case. How can I make the search result display proper links for root level folders also?<o:p></o:p>
Thanks
Pranava

Hi Pranava,
I couldn't reproduce this issue, when I create root folder FS0 in "Shared Documents" and start a full crawl, I click the FS0 link from search results page, it will open the FS0 folder as well as folder under FS0.
Please right-click the FS0 name hyperlink (e.g. mine is http://sp/Shared%20Documents/FS0) and paste in IE browser see if it could be accessed successfully.
Also test if other Shared Documents have this issue in other site collection or web applications, if not, run a full crawl may do a trick (please reset search index if only full crawl still doesn't work).
Thanks
Daniel Yang
TechNet Community Support

Similar Messages

Workflow in document library doesn't function properly on uploaded documents

I have a document library with a few different content types. When documents are added to the library either via new or upload I want to run a workflow that numbers the documents (so contracts have a contract number & change orders have an order number).
The counters are in a separate list - one item for each counter, a last number and a calculated next number.
So for contract numbers the workflow gets the nextnumber for the counter and enters it into the contract number field of the current item before sending it back to the counter as last number.
The workflow is set to start on item creation and works just fine with new documents. However, it doesn't work on uploaded documents. In order to discern between the different content types I've set a field condition to recognize if the workflow should run.
When uploading documents the workflow runs before the field is set and therefore doesn't set the contract number.
I tried just setting a 5 min "wait" at the start of the workflow, but then the document fails to save.
Workflow:
Sorry it's in Norwegian, I can't figure out how to get the conditions and actions into English (all my buttons etc are in English)...
Any ideas on how to get the workflow to run properly in order to update the contract number?

Hi,
According to your post, my understanding is that you had a workflow in document library didn’t work properly.
I hadcreated a list called Counter1, created a library called
New&Upload, modified the view of the list, made it display the
ID of the list.
I created a simple workflow as below, selected “Start workflow automatically when an item is created”, it worked well without any issue no matter
Upload or New a document.
You can create a new workflow with a new library, then check whether it works.
You can also check the event log and ULS log to see if anything unexpected occurred.
To check event log, click the Start button and type “Event Viewer” in the Search box.
For SharePoint 2013, by default, ULS log is at
C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\15\LOGS
You can check the ULS log by the methods here:
http://blogs.msdn.com/b/opal/archive/2009/12/22/uls-viewer-for-sharepoint-2010-troubleshooting.aspx
http://msdn.microsoft.com/en-us/library/gg193966(v=office.14).aspx
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

HT201407 i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?

i've updated my iphone 3gs software to the latest version of ios and now my device does not activate. i've searched for help here and it still doesn't work...is there anything else i can do, or i have to take the device back to the store?

Where did you buy this iPhone and how did you unlock it?

I bought a new macbook pro 13inch retina and sometimes the charger doesn't work properly, I dont know if its the charger or my laptop?

I bought a new macbook pro 13inch retina and sometimes the charger doesn't work properly, I dont know if its the charger or my laptop? i always have to take the charger in or out for it to work ... -.-

Apple Portables: Troubleshooting MagSafe adapters
http://support.apple.com/kb/TS1713

When Searching for attachments to mail, preview mode doesn't work

When I am in mail and am composing a new email and I click "Attach" to attach a file, the current folder comes up and shows the preview mode of every file type (i.e. pictures and pdf previews). No problems. However, if I then do a search for something (my name for example) to narrow down my choices of files or images to select, the next search level does not show a preview of the files or images, just a .pdf icon or the .jpeg icon - NO PREVIEW. This is extremely frustrating! I tried on different folders and the same results occurred. Any ideas or is this a bug?

Hi Pranava,
I couldn't reproduce this issue, when I create root folder FS0 in "Shared Documents" and start a full crawl, I click the FS0 link from search results page, it will open the FS0 folder as well as folder under FS0.
Please right-click the FS0 name hyperlink (e.g. mine is http://sp/Shared%20Documents/FS0) and paste in IE browser see if it could be accessed successfully.
Also test if other Shared Documents have this issue in other site collection or web applications, if not, run a full crawl may do a trick (please reset search index if only full crawl still doesn't work).
Thanks
Daniel Yang
TechNet Community Support

Recording Save for Web in an Action still doesn't work properly in Photoshop CS6 13.0.1

There is still an issue with making new actions that include saving for web. While recording the action, save for web functions as it should. But once the action is played, regardless of the original format the saved image should be, it gives it an html filename extension. This can be extremely frustating when you have an action that saves over a hundred images from a single action.
I have seen posts in Adobe forums from many people regarding this very irritating bug, including posts from Adobe employees acknowledging the bug. This was present in the Beta, the initial release, and in this 13.0.1 update. No fix.
http://feedback.photoshop.com/photoshop_family/topics/ps_cs6_actions_recorded_action_expor ts_html_instead_of_jpg
The employee acknowledged this bug THREE months ago (as of this post), yet all things considered, this doesn't seem like something that would take three months to fix!
I have spoken about this bug with a friend that is a computer programmer. Considering that the action is saving the file correctly, and it's only the name that is not saving properly indicates that this is a superficial error, and not an issue that would require rewriting the code completely. Also consider that this WAS functioning properly in CS5, and that this is a very easily reproducible bug. Adobe should have plenty of information required to correct the issue. I understand that this fix may be more or less difficult to do than what I am suggesting, but it should have been fixed by now.
I don't understand this mentality. Please Adobe... Put CS7 down for a little while, and fix what needs to be fixed in CS6. People (myself included) have paid A LOT of money for your products, it's not unreasonable to expect them to work properly. Bugs happen, it's understandable, but it's not unrealistic to expect a fix for them when the software is as expensive as it is. Is there actually any plan to correct this issue?

See also: http://forums.adobe.com/message/4662367#4662367
-Noel

Username search doesn't work properly if there are spaces in the username

I was experimenting with the watch user widget and you have to select a user from a list of users based on a search.
The problem is that spaces are not respected in the search so that you can't easily set up a watch on a user name with spaces.
Two examples that I tried were b noir and katrina s.

I actually just set up my watch user for you, p, saw your post title and wondered if you were looking for me. I have the same sort of trouble.
My workaround for this (and also constraining discussions search on my posts) is to not refer to the drop down list. Instead, I click the wee blue "Select People" link next to the field. In the Username Lookup thingy that comes up, I type b noir into the Username field, and then click Lookup. That'll bring me up.
I agree it's not easy. Took me quite a while to work out the procedure.

Sign-in doesn't work properly; need to sign in all the time between windows although signed in for 2 weeks.

popup appears out of nowhere reading "We noticed you may have signed in or signed out in another window. Click OK to reload your page" Leads you to sign in again.
This is not a problem with the old Flock, Chrome, or IE, just Firefox.
It appears that anytime one leaves mail or personal home page and goes to a website, a sign-in is required to get back to mail or personal homepage.
I have run out of ideas using tools-options, etc. setups.
I am addressing Firefox 4.0.1, and Windows XP
Clarence

Cleared everything, several time over several days, no change.
Still have not diagnosed the problem and I have made a lot of changes, including re-loading M.FireFox 4.0.1 with ATT Yahoo vers. 1.8
It sometimes appears that the sign-in times out, although I tried signing in for 2 weeks and also 1 day. ATT Yahoo has a sign-in seal one can setup and use. It is fine and works only that one day or until one signs out, than it is history.
Clarence

Key Command for "Go to Next Marker" doesn't work properly

Hi there!
While using Logic Pro 9.1.8 with Mountain Lion (10.8.2), it seems that the Key Command for "Go to Next/Previous Marker" doesn't work properly.
The only effect is, that a grey rectangle moves in the top of the Arrange Area while ignoring the Markers itself.
Any suggestions to solve it or is it me that is misbehaving?
Cheers, GJ

Hi
The commands work correctly here on the same OS etc: Cycle Locators jump to the next/prev marker and the Playhead jumps to the Start of the Marker.
Default KC are Control Command +Arrow Left/right
Step 1: check you are using the correct key command :-)
CCT

Wifi driver doesn't work properly

HI,I've installed W8.1 instead of W7 but Wifi Dosen't work as a reight Way The Wi-Fi works for then depends on the work and then worked for againe
this affects my Job if i download anything,it stop loading continuesly.
I've tried W8 and the same problem but it works truely with w7.
what should i do for making it works truely with W8.1.
Sorry length of e-mail.

vn7571g_user,
Sorry to hear that you are not having the best possible experience with your new notebook. I'd like to try and address a few of your concerns that you have listed and see if there are some things we can resolve for you.
1. Wifi doesn't work properly:
I see that you have posted in a couple other threads (1st, 2nd) regarding wireless issues with this notebook. We can gladly check this unit at the repair depot for you if you are not keen on changing the card out, PM me the following information and I will see what I can do for you:
SNID or serial number
Contact name
Contact number
Email address
Shipping address
Purchase date
2. Wifi doesn't work after switching on and off 'Airplane mode'
If you have already tried to install/update the drivers, it could be a Windows issue. You can attempt a refresh to see if that helps resolve it.
3. Trackpad response is terrible
This notebook uses a precision touchpad possibly, but since it uses Synaptics drivers you have a couple options:
You can change the way that the touchpad works.
It says Windows 7, but you can see if you have this option in the touchpad settings and see if it helps you out.
4. Speakers jar
Do you have the same issue without the Dolby turned on?
5. Num-Lock is 'Off' after every sleep session
Here is a Microsoft article that discusses this feature. You can follow the steps that they list if you would like.
6. Keyboard-backlight setting is 'On' after every sleep session
The backlit keyboard is working as designed. Here is an article with some FAQ about the backlit keyboard to help customers understand its functionality a bit more.
A couple final thoughts:
Did the issue(s) you are having occur before or after Windows updates, sometime a bad installation of an update can cause all sorts of things to happen.
Worst case, you can always try to restore to factory defaults and test all these things before applying updates or installing any applications or programs.

Minion rush app doesn't work properly...

Minion rush app doesn't work properly... I open the app and it closes by itself, is anyone with this problem?
I uninstall the app several times and restart the iPhone, and it doesn't work,

This isn't an Apple product. Contact the app developer for support.

Selecting with colour range doesn't work properly

Well, at least to me it doesn't work properly. If I have elements on seperate levels and I use the colour range option to select the area, it works on all the levels, not just the level I have selected. That's not what I want! I only want it to select the colour range on that one level. The work around is to manually turn off other levels, but on a file with lots of levels, that can be tedious. Can this be avoided? Incidentally, magic wand works only on the selected level, but not colour range (or color range, if you are American).

Aha! You are correct. Layers above the target layer are still being sampled when sampling is at "Current Layer".
That has to be a bug. The Eye Dropper Tool itself does work correctly, though.
I'm about to report another problem, so I'll report this one, too.
Edit: Looking again, I don't think there is a bug.
It seems to not be that the higher layer is seen when sampling "Current Layer", which is correct and the same as when the Eye Dropper Tool itself is use. However, the pixels of the visible composite are then evaluated to determine the regions to be selected. I guess that's correct behaviour and you will have to do the Alt-click on eye trick to completely ignore all other layers.

Retrieve all folder & sub folder from document library in sharePoint 2013

Hi,
I want to retrieve all the folder and sub folder from document library and bind it to the dropdownlist using server object model.
I used the below query to get all folder and sub folder.\
query.Query = @"<Query><Where><Eq><FieldRef
Name='FSObjType' /><Value Type='Lookup'>1</Value></Eq></Where></Query>";
query.ViewAttributes
="Scope='RecursiveAll'";
query.ViewFields
= "<FieldRef Name='Title'/>";
query.ViewFieldsOnly
= true;
but when I bind result with the dropdownlist,it displays the output as below
Please Help
Thank You

Hi,
Thanks for posting your issue, Kindly try out below mentioned CAML query to get all the Folders and Subfolders from Document Library
<Query>
<Where>
<Contains>
<FieldRef Name='FileLeafRef' />
<Value Type='Text'>token</Value>
</Contains>
</Where>
<OrderBy><FieldRef Name='FileDirRef' /></OrderBy>
</Query>
<ViewFields>
<FieldRef Name='ID' />
<FieldRef Name='LinkFilename' />
<FieldRef Name='FileDirRef' />
<FieldRef Name='FileLeafRef' />
</ViewFields>
<QueryOptions>
<ViewAttributes Scope='Recursive' />
<OptimizeFor>FolderUrls</OptimizeFor>
</QueryOptions>
Also, check out below mentioned URLs to fix this issue
https://social.msdn.microsoft.com/Forums/office/en-US/35e799a1-9360-46e5-8719-dd35fdace7ea/filter-document-library-folder-through-caml-query?forum=sharepointdevelopmentlegacy
http://www.ktskumar.com/blog/2009/07/retrieve-all-folders-from-list/
I hope this is helpful to you, mark it as Helpful.
If this works, Please mark it as Answered.
Regards,
Dharmendra Singh (MCPD-EA | MCTS)
Blog : http://sharepoint-community.net/profile/DharmendraSingh

Add Folder to Document Library

I created a document library. I can add new document to the document library. But I want to add folder my sharepoint site. How can I do this? Is it possible?

Hi,
To Create folder inside the document library , Just click on Files Tab at document Library Ribbon.then It will prompt for folder name (enter folder name ) and click on Save.
If you want to create folder through Programmatically, Pls check below link.
http://www.c-sharpcorner.com/uploadfile/dhananjaycoder/programmatically-creating-folder-in-sharepoint-document-library/
If you think it is helpful,Vote As Helpful! And if you see a reply being an answer to the question of the thread, click Mark As Answer.
Mahesh

How to update managed metadata column for all file in document library using powershell

Hi,
How to update managed metadata column for all file in document library using powershell?
Any help on it.
Thanks & REgards
Poomani Sankaran

Hi TanPart,
I have changed the code which you have give in order to get the files from SharePoint 2010 Foundation Document Library.But i am getting below error in powershell.
Property 'ListItemCollectionPosition' cannot be found on this object; make sure it exists and is settable.
Could you tell me which is the issues in it?
See the code below.
$web = Get-SPWeb http://ntmoss2010:9090/Site
$list = $web.Lists["DocLib"]
$query = New-Object Microsoft.SharePoint.SPQuery
$query.ViewAttributes = "Scope='Recursive'";
$query.RowLimit = 2000
$caml = '<Where><Contains><FieldRef Name="Title" /><Value Type="Text">Process Documents/Delivery</Value></Contains></Where>' +
        '<OrderBy Override="TRUE"><FieldRef Name="ID"/></OrderBy>'
$query.Query = $caml
do
    $listItems = $list.GetItems($query)
    $spQuery.ListItemCollectionPosition = $listItems.ListItemCollectionPosition
    foreach($item in $listItems)
        #Cast to SPListItem to avoid ambiguous overload error
        $spItem = [Microsoft.SharePoint.SPListItem]$item;
        Write-Host $spItem.Title
while ($spQuery.ListItemCollectionPosition -ne $null)
Thanks & Regards
Poomani Sankaran

Searching for a folder in document library doesn't work properly if the folder is at the root level.

Similar Messages

Maybe you are looking for