Searching for a page in the site map

Hi all! I'm using an older version of Dreamweaver... MX. I'm
hoping there's a way to do a search for a specific page using the
site map. I have some out-dated pages on a HUGE website I'm trying
to clean up for a local organization. I did a search for orphans,
and they were not listed. Therefore I know they are somehow still
linked to other pages. So I can't just delete them. I need to
update the links. I did this on my local drive, but I need to do it
on the server, as I realized I can't replace all pages on the
server (others have access to it too). Does that make sense?
Anyway, let me know if I can search using the site map for specific
pages. Thanks!
Julie

Do a sitewide find for the filenames. That'll tell you which
other pages
link to them.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DigitalChick" <[email protected]> wrote in
message
news:fasdd7$e8l$[email protected]..
> Hi all! I'm using an older version of Dreamweaver... MX.
I'm hoping
> there's a
> way to do a search for a specific page using the site
map. I have some
> out-dated pages on a HUGE website I'm trying to clean up
for a local
> organization. I did a search for orphans, and they were
not listed.
> Therefore I
> know they are somehow still linked to other pages. So I
can't just delete
> them.
> I need to update the links. I did this on my local
drive, but I need to do
> it
> on the server, as I realized I can't replace all pages
on the server
> (others
> have access to it too). Does that make sense? Anyway,
let me know if I can
> search using the site map for specific pages. Thanks!
>
> Julie
>

Similar Messages

How to not show pages in the Site Map

This is probably the easiest question of them all... but...
How do you not show pages in the site map?
It seems that by default, all pages are added to the sitemap.
Is it a case of unchecking "enabled" and checking "exclude from search results" under "More Options" on the page itself?
Or another way?

Hi David,
The "exclude from search result" will remove from the sitemap.xml "yoursite.com/sitemap.xml" and from major search engines from being picked up. If you tick this option please allow for a few hours to have the xml to reflect the changes.
"If you select this option then this web page will be excluded from the site search feature built into this system as well as from the sitemap.xml file submitted to the major search engines such as Google, Yahoo and Live."
The sitemap module found under site settings is not related to the xml file so you'll need to manually remove and insert onto your page if using this feature.
- http://kb.worldsecuresystems.com/kb/add-sitemap.html
Hope this clarifies.
-Sidney

If I'm reading a book on the iPhone and I want to pick up where I left off on my iPad, do I have to search for what page I was on on the iPad or is there a way to sync it?

If I'm reading a book on the iPhone and I want to pick up where I left off on my iPad, do I have to search for what page I was on on the iPad or is there a way to sync it? Or do I just have to search for a string of text from my iPhone on my iPad?

On both devices go to Settings>iBooks>Sync Bookmarks>On. Then when you want to quit reading on one device, tap the bookmark in the upper right corner and it will turn red. That marks your place. Close the book on the device now by tapping on the Library button in the upper left corner of the app. That will put the closed book back on the shelf. Tap the home button.
On the other device, when you tap on the book, it should open to that page. You have to be connected to WiFi in order for this to work. You can read this older discussion for more information. I was involved in that as well.
https://discussions.apple.com/thread/3754714?start=0&tstart=0

How do I change the .php file name for a page of my site?

how do I change the .php file name for a page of my site? The only link to the page is the nav. button link for it in the global nav. The reason I need to change the file name is we want the breadcrumbing name to change and the breadcrumbing is linked to the file name.

The reason I need to change the file name is we want the breadcrumbing name to change and the breadcrumbing is linked to the file name.
I don't understand this reason. How would changing the file extension solve your breadcrumb issue? Why don't you explain the issue in more detail.

Why did Adobe remove the Site Map Tool in CS4?

Is there a better, faster way to wireframe? I could wireframe a prototype 20 page website for testing in about 5 minutes using this tool. I doubt there is a faster way but there is probably a better way. What are some of the best practices on wireframing. Obviously, I am out-of-date if Adobe drops my main tool for wireframing.

iroot wrote:
Obviously, I am out-of-date if Adobe drops my main tool for wireframing.
The original announcement that the Site Map was going to be dropped was made in August 2007, and had this to say:
there are many features in the application that require significant
resources to maintain release to release, but aren't being used with
significant frequency.
That's obviously not much comfort to you, and I'm sorry that I don't have an answer regarding an alternative wireframing tool. However, if you have need for a particular feature in Dreamweaver, it's always a good idea to submit a formal request through the feature request/bug report form at http://www.adobe.com/cfusion/mmform/index.cfm?name=wishform. "Bring back Site Map" is likely to fall on deaf ears, but "provide a simple wireframing tool for site development", with an explanation of how you envisage it working and the benefits it would offer other users, could bring a completely different response.
Good luck in your search for an alternative wireframing tool. If you find one, post the details back here for the benefit of others in a similar position to yourself.

How do I reorder top level pages in BC Site Map Settings?

I created a desktop and mobile version of web site in muse and am hosting through BC. The site map settings show the pages alphabetically.
1. - Is there a way to reorder the root level parent pages other than alphabetically? I see I can add the sub-level pages under the top-level pages via drag and drop, but can't reorder any pages. As I'd like to publish the site map to my website but would be unacceptable to have it starts with a 404, Home is somewhere in the middle...
2. - That being said, does this make any difference for SEO?
3. - Also, since I have made 2 versions of site (desktop and mobile) which contain same page names, they appear to be showing as dupes in site map settings function. How do I know which is which as reorder and include on site map?
Thank you in advance..

Yeah that is an issue web developers have been facing for years.
There are some work arounds that you can try:
1: Use the Tooltip Composition for the drop menus and set the transition time to a bit longer time so it isn't quite as apparent there is a secondary menu.
2: Set the menu widget to 'Manual' and add the link to the top level page to the drop menu as well.
3: Don't have a drop menu - just have a seperate template for each section that has drop menus and then in that template add a manual menu widget and add a secone menu to that template on the side or below the other menu or where ever with just links to the pages in that section.
There are probably a few more options but there is no way to really solve the problem with the way it is set up other than maybe creative menu link names. For example top level could say 'All Gizmos', then the drop menu links can say 'Gizmo One', Gizmo Two' etc.

How do YOU organize pages, create a site map, and use hyperlinks?

I had to get out of bed to bring this up with you all; I couldn't stop thinking about this next learning curve. It is: How shall I organize the topics I have in my website? One extreme is to have all of the topics showing in all of the nav bars at the top of all the pages. The opposite extreme is ............ I cannot truly visualize it.
I think that the big obstacle for me is that i don't want to hide any pages so well, so slickly, that they can be found only by the most focused and persistent website visitor. I can see how some pages could be lost to a lot of casual website viewers.
On the other hand, there are some pages that are natural groups. In my case, the U.B.R.O.L. group is that. It is made up of five people and me. I have one page for a photo slideshow which has one photo of each of us, but then I have a separate page for Nigel and his photos, a separate page for Vali and her long bio and photos, and a separate page for Helen, her short bio and her many photos.
Tonight I tried making hierarchies using hyperlinks, so that U.B.R.O.L. shows up in the Site Menu, but Nigel, Vali, Helen, and Peggy do not show up. To get to their photos, one would have to click onto the U.B.R.O.L. group page. Once at the U.B.R.O.L. page, one can then click onto Vali's, Nigel's, and Helen's page, and then from each of their pages there are 3 hyperlinks: one to return to U.B.R.O.L., and three more hyperlinks to click onto the others who have personal pages. (Peggy does not have a personal page because she is shy and never gave me more photos or a bio of herself. She prefers anonymity.)
But even though I put those hyperlinks on those pages, I am having an internal concept war, my friends, and a solution is not at hand.
I am thinking of how I am going to deal with the pages made for me, my husband, and my husband and I together.
I cannot imagine clearly how a Site Menu would look at the topmost level and much less of an idea how each page would look several levels down.
I welcome any direction you could send my way. I would like to know how you organized your pages, how you decided which pages would not be listed in the nav bar, and what you did to/with the pages that were not listed in the nav bar.
Would you please send me the URL of your website so that I can SEE what you are talking about? I am not good at imagining what people say; I have to see it rather than imagine it.
Lorna in Southern California

Lorna, mostly from reading books, Iearned the following things.
•Don't make me think (actually the title of an excellent book on webdesign)
•Every information should be available in at most 3 clicks
•Tell them where they are, where they can go and where they have been.
IMHO, iWeb lends itself fairly well for these last 2 criteria. The Navbar is a very useful tool and I suggest you do not go too far away from it.
On my current issue of the toy theatre magazine (which is NOT a beautiful website) I wanted to go in 3 languages; English, German and Dutch. I knew i was courting disaster but one can be so ambitious. This in fact meant that I had to do 3 sites. Sites being defined as a group of pages structurally belonging to each other.
So I made an Index/Splash page with a nice picture, a title and 3 flags. These being links to the 3 versions. (I did not want to make them think on the Splashpage).
Clicking a flag brings the visitor to a Contents page on their version of the site. Just like the Contents page in a book. Here they can choose to go to any of the items and on each and every page of the site is a Contents button that returns them there.
Pages are numbered in the middle of the website, and to the leftside the number of (and link to) the previous page and to the right the same for the next page.
The current issue is number 25, ( http://www.vischmarktpapierentheater ), the previous 24 were done in Freeway and the design stems from there.
The translation to iWeb did work well but in the end the result was disappointing mostly because I wanted some slideshows, hated the "None .Mac accounts" version and went overboard with Keynote slideshows, really ugly.
The other problem stems from the triple language idea. This meant that I had to do either 3 versions of each slideshow, or make one version accessible for every language. This menat some convoluted linking which I will never do again.
In short If you want to go "deep", make various sites and link each starting page to you Index/Splash, keep the starting pages of each site on the Navbar Make a Contents sidebar or something like that on each of the starting pages, and than you can go anywhere within the required 3 clicks.
Good Luck
Harry

CSS not applying to a page if navigated to from one other page in the site

Hi,
Quite new to dreamweaver. Built a site a few months ago and when updating the content I decided to update the style as well using the CSS sheet.
Strange problem occurring....
When you navigate to the Contact Us page directly via URL or any but one page in the site, the SCC applies and webpage displays well.
However, if you navigate to the Contact Us page form the About Us page then all styling is lost.
Below is my NavBar coding. I have compared it on all pages and it's the same. Can't work out why CSS not applying in this one specific instance.
<nav id="mainnav">
      <ul>
        <li><a href="index.html">Home</a></li>
        <li><a href="TheCollection.html">Collection</a></li>
        <li><a href="News.html">News</a></li>
        <li><a href="About.html" class="thispage">About Us</a></li>
        <li><a href="Contact.html">Contact Us</a></li>
      </ul>
    </nav>
Any advice appreciated and let me know if I can provide anything else that might help you to help me.
Thanks!
S

How many style sheets do you have for your entire site?
You should have boilerplate.css, your fluidGridLayout.css (whatever you named it) and one other custom css file for your content styles. All 3 style sheets should appear on every page. For site management reasons, I usually put my CSS files into a styles folder.
Sitename (C:\sitename)
index.html
about.html
contact.html
etc...
     -styles
          boilerplate.css
          layout.css
          custom.css
With that structure above, your links to external style sheets should look something like this on every page.
<link href="styles/boilerplate.cssview-source:http://www.theseasonhats.com/keysheet.css" rel="stylesheet" type="text/css">
<link href="styles/layout.css" rel="stylesheet" type="text/css">
<link href="styles/custom.css" rel="stylesheet" type="text/css">
Nancy O.

How are people searching for music now that the power search link is gone?

How are people searching for music now that the power search link is gone?

That info in my above post doesn't bring back Power Search
I think this Discussion holds the answer https://discussions.apple.com/message/20451945#20451945
Found it under iTunes U! Don't know why the moved it from the main page but you will find it here.

Is there a way to search for a file within a site defined in Dreamweaver?

I know you can search for phrases within a file's code, but
what if I have defined an extremely large site in Dreamweaver with
thousands of files in it and then I search for a file with the
phrase "contact" in it? Is there a way to do this in Dreamweaver or
is there an extension that would add this functionality?

On Thu, 24 Jan 2008 01:50:58 +0000 (UTC), "MartinUCSD"
<[email protected]> wrote:
>I know you can search for phrases within a file's code,
but what if I have
>defined an extremely large site in Dreamweaver with
thousands of files in it
>and then I search for a file with the phrase "contact" in
it? Is there a way
>to do this in Dreamweaver or is there an extension that
would add this
>functionality?
Of course
Edit | Find and replace
put in the "content" in the Find box - select Find in Entire
site and
click Find all
~Malcolm N....
~

Programmatically search for a page via a property value

Hi,
I really need help with this, using java I need to search for a page via property value.
Thanks.

I don't know if this performs well, but this snippet traverses a branch with root "node", finds jcr:content nodes, and gets a specific child node. You could use the node.getproperty() method in your case and traverse the /content branch (or wherever your pages are stored). See the javax.jcr.node (http://www.day.com/maven/jsr170/javadocs/jcr-1.0/javax/jcr/Node.html). Also see org.apache.sling.jcr.api.SlingRepository (http://dev.day.com/docs/en/cq/current/javadoc/index.html)
NodeIterator iter = node.getNodes();
while (iter.hasNext()) {
        Node n = iter.nextNode();
       //Look for "jcr:content" nodes
       if (n.getName().equals("jcr:content")) {
               //get the path of the model node and save it
               if(n.hasNode(MODEL_NODE)){
                     modelIds.add(n.getNode(MODEL_NODE).getPath());
       } else{
       //Scan child nodes
       getModelIds(n);
scott

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

When I upgraded my iMac to Lion I can no longer connect the iPad 2 to WiFi. It gives me a message unable to search for WiFi. Before the upgrade to Lion it worked fine. What gives?

Could there be a setting I need to adjust in the iPad2? When I try to turn on WiFi and enter the name of the WiFi that I have established, including the security type and the password, I get the message "Could not scan for wireless networks." Is there a setting in iCloud or other location that needs to be changed?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab?

Is there any way to search for a term using the Firefox search field, and have the results automatically open in a new tab? When there was support for Google Toolbar, I was able to do this; now, whenever I want to search for something, I have to open a new tab to do it, and cut-and-paste my search into the search field in the new tab. I used to be able to highlight, drag, and drop something into the search field and have it automatically open in a new tab. This is enough for me to switch to Chrome . . .

Set a preference to have searches from the Search Bar (upper right) automatically open all searches in a new tab
#type '''about:config''' in the URL/Location/Address bar and press the Enter key
#if you see a warning, accept it (promise to be careful)
#Filter = '''browser.search.openintab'''
#in the lower panel, double click the item (or right-click and choose "Toggle") to change the value to "true"
#close the about:config tab and test
#See:
#*For help with opening/using about:config, also see: http://kb.mozillazine.org/About:config
#*Also see: http://kb.mozillazine.org/About:config_entries (click on "Browser", scroll down to browser.search.openintab)
'''Search Bar''': http://support.mozilla.com/en-US/kb/Search+bar
'''If this reply solves your problem, please click "Solved It" next to this reply when <u>signed-in</u> to the forum.'''
About Google toolbar............
Google decided that they will no longer produce the Google Toolbar for Firefox 5 and newer version. It is best to move on to other alternatives than to try any "hacks" to the toolbar that may or may not perform in the future. Future versions of Google toolbar will only work with IE7-9. Google Toolbar is not available on any other browser, even Google's own browser.
*http://googletoolbarhelp.blogspot.com/2011/07/update-on-google-toolbar-for-firefox.html
*https://support.mozilla.com/en-US/kb/google-toolbar-not-compatible-firefox?s=google+toolbar&r=0&as=s
*http://www.google.com/support/toolbar/bin/answer.py?answer=1342452&topic=15356%29
*Google Toolbar 8 FAQ (IE only): https://www.google.com/support/toolbar/bin/answer.py?hl=en&answer=1111588
'''''To access your Google Bookmarks visit''''' www.google.com/bookmarks.
Alternatives:
*http://kb.mozillazine.org/Using_Google_Toolbar_features_without_toolbars
*https://addons.mozilla.org/en-US/firefox/addon/googlebar-lite/
*https://addons.mozilla.org/en-US/firefox/addon/gbookmarks-google-bookmarks-fo/

How do you search for a song in the latest version of ITunes??

How do you search for a song in the latest version of ITunes??
Yes this might be the stupidest question ever, but leave it to Apple to make the simplest thing hard.
In EVERY version of Itunes, up until 11, you used to be able to type an artists name, song name, or album into the search field and it would narrow it down so that you can see what you are looking for (in the list below). Now, Itunes tells you that you have music by said artist, yet doesn't list them whatsoever. Furthermore, when you click on the results it doesn't list them for you either.
I'm sure it is some weird setting, but cannot for the life of me find. I cannot name one application that doesn't show a list when you type in the search field. Augh!
Please help.
G

You can choose what it searches and where

Is it possible to search for multiple folders with the same name and...

Is it possible to search for multiple folders with the same name and then select them all and change the permissions on just those folders .i.e. Search for the budget folders in all client folders and lock them down to just the project managers. Without having to go to each folder and apply the permissions.

user11919409 wrote:
Is it possible to create a Clone database with the same name of source db using RMAN ...
yes
>
DB version is 11.2.0.2
Is it possible to clone a 11.2.0.2 database to 11.2.0.3 home location directly on a new server . If it starts in a upgrade mode , it is ok ....yes
Handle:     user11919409
Status Level:     Newbie (10)
Registered:     Dec 7, 2009
Total Posts:     102
Total Questions:     28 (22 unresolved)
why do you waste time here when you rarely get any answers to your questions?

Searching for a page in the site map

Similar Messages

Maybe you are looking for