Searching for a single file

Hi,
We are running Zenworks 4 ir7. We have an in house application that is
used on only some systems and now needs to be updated. It does not show
up on the software list...is there some way using zenworks to look for a
certain file (which is unique to this application)in order to flag the
systems that are running this application
Thanks
James

James,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://support.novell.com/forums/faq_general.html
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://support.novell.com/forums/

Similar Messages

  • Searching for a good file manager

    I'm searching for a good file manager. Konqueror 3.5 is quite good, dolphin 4.1 and konqueror 4.1 are not. Since konqueror 3.5 is going to die due to lack of support in the future, I kind of need to find a new good file manager...
    Do there exist file managers with the following features?
    Many of these features are things I thought were quite logical to be in a file manager, but seem to be missing in most "modern" ones...
    -independent of any desktop (gnome or KDE), just a standalone program
    -preferably not being both a web browser and file manager in once, at least not in an annoying way. Konqueror 3.5 shows that being that combination is possible without being annoying.
    -ability to have a tree view of the folders on one side and list view showing the files and subfolders of the folder currently selected in the tree on the other side
    -detailed list view showing at least filename, type, date and size, and the ability to sort according to any of these properties
    -a non-detailed view showing image contents would also be nice, to browse folders of photos or other images
    -ability to open files in certain programs if you doubleclick the file, NOT open it by singleclicking, singleclicking may only select it
    -ability to select multiple files by dragging box around files or using keys like "ctrl" and "shift"
    -ability to do "open terminal here" or type terminal commands in the current open directory
    -must have ability to drag files from one folder to another, from list view to tree view and vica versa, to move or copy them
    -and must have ability to use "ctrl+c" and "ctrl+v" to copy files and foldes from here to there
    -multiple tabs is a huge plus
    -favorites (to local folder paths) is also a huge plus
    -preview of files when hovering the mouse over them is nice
    -must have ability to zip and unzip (or other compression formats) folders by just right clicking them and choosing a zip/unzip command there
    -in addition to that, must also have ability to browse through a zip file as you would through a normal directory, and drag files from the insides of the zip file to the tree view to automatically unzip those files there, and of course "ctrl+c"/"ctrl+v" should also work to copy a file from the inside of the zip file, to some other folder on your disk
    -no horizontal autoscrolling in the tree view, that is an invention straight from the abyss...

    I know exactly how you feel about KDE 4 vs. 3 -- Konqueror was the best part of KDE for me (pretty much the only part I ever used, actually; my window manager is a slightly modified version of WMII and I generally loathe "desktop environments"). KDE 4 ruined it, completely and utterly.
    I submitted about 20 different bug reports about Konqeuror 4, mostly features that they'd deleted or mangled; some of them are starting to be addressed now. I don't think they'll ever fix the speed issues though, because those are dependent on the underlying KDE 4 libraries as far as I can tell -- it's as if KDE 4 were purposely and deliberately designed to be slower than KDE 3. Even if they fix all of its deficiencies, that'll probably keep me from using it...
    Right now there's KDEmod, which will hopefully maintain its KDE 3 branch for a while longer. It's starting to show some problems, though; I haven't been able to get kdemod konqueror 3 to work fully out of the box (the settings pages are all blank). On my main machine, I somehow managed to hack together some of the KDEmod3 packages so that I have a functional konqueror 3 running alongside the Arch repository's version of KDE4. I'm afraid to pacman -Syu now, though, because it will probably break horribly :P
    I don't remember exactly how I got konqueror 3 going like that, as I did it in my initial fit of rage after I did the pacman -Syu that got me KDE4 (a decision I have regretted ever since), but it was something like this:
    1. move /opt to /opt.kde4
    2. make a new /opt
    3. download several KDE 3 packages from the KDEmod3 repositories manually
    4. extract those packages into the new /opt with tar -xzf (NOT pacman!)
    5. try /opt/kde/bin/konqueror
    6. read reams of error messages about missing libraries, segfaults, etc.
    7. try to supply the missing libraries by downloading other kdemod3 packages and manually extracting them
    8. goto 5
    Then, when everything worked (sort of), I renamed some stuff so that 'konqueror' is konqueror 4 (I think having it konqueror 3 broke something else, but I don't remember what), and konqueror 3 is called 'k3nqueror'.
    If KDEmod3 ever goes away and there's no other good replacement file manager by then, I'll probably take the source code of KDE3 and try to make a standalone version of konqueror out of it. (Which will probably be quite a project because of how interdependent all the KDE components are.)
    Some features I "need" in a file manager, besides the ones you mentioned:
    - Konqueror's tree view (where you can expand folder branches in the file list)
    - Infinite view splitting -- I frequently have my konqueror windows split into 4, sometimes as many as 6 or 7 view panes. Very useful for sorting out files.
    - Selection rectangles are sensitive only over files -- I find full-row-select really annoying, because there are no guaranteed "blank" areas that you can click on to clear a selection. I also use this behaviour to grab long-named files that are interspersed with short ones, because they hilight first when the rectangle touches them (you wouldn't think this very useful, but surprisingly often you do want to do something to all the long-named files...)
    - Right-clicking on a folder and clicking "Paste" pastes into that folder, not the current one -- you'd be amazed at how many file managers get this wrong. I shouldn't have to cd into a folder just to paste some files there.

  • How Can I stop Elements 7 from searching for a memory file?

    Recently, every time I turn on Elements 7 it starts searching for a missing file each time it encounters a photo with a "?" in the corner. I must have pressed a key somewhere to start this function but now I can't get it to stop. I can only continue to another photo if I press cancel while it is searching but I have to do this for each "?" marked picture. Is there any way of cancelling this feature? Thanks in anticipation.

    Two solutions:
    1. Uncheck the option Edit > Preferences > Files > Automatically Search For And Reconnect Missing Files.
    2. Either reconnect the missing files or delete them from the catalog, using the File > Reconnect > All Missing command.  See this FAQ for tips on how to use the command:
    http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Quickly_reconnecting_large
    Leaving missing files in your catalog doesn't have any benefit.

  • When I open iMovie, the app searches for missing iPhoto files.  These are files I deleted.  I have to close about 30 dialog boxes before I can start using iMovie.  How do I make this stop?

    When I open iMovie (09), the app searches for missing iPhoto files.  These are files I deleted.  I have to close about 30 dialog boxes before I can start using iMovie.  How do I make this stop?

    So it seems the issue is when iMovie is wanting to creat thumbnails, if I ask it to ignore then it's fine but if not it hangs up searching for the video file.

  • Working on a script to search for and move files - need Guru help!

    Hi, I'm trying to help my dad with a task and my outdated Applescript knowledge isn't helping me much.
    Here's what I need to do in a nutshell:
    FolderA contains a bunch of JPG files.
    FolderB is the root of a hierarchy of folders containing DNG files.
    Each file of FolderA has a mating file (same name but with .DNG) somewhere in the hierarchy of FolderB.
    The goal is to move each JPG file from Folder A to the folder containing it's mate.
    So, the basic flow is:
    1. Get list of files in folderA
    2. Looping through list, strip out file name (fileA) and find the DNG file somewhere inside FolderB
    3. Get the path of the folder containing the matching DNG file
    4. Copy/move FileA to the folder.
    5. Loop back to #2
    OK, so here's where I am:
    tell application "Finder"
    set JPEGfolder to "Macintosh HD:DadTest1:DadA"
    set DNGfolder to "Macintosh HD:DadTest1:DadB"
    set a_list to every file in Afolder
    repeat with i from 1 to number of items in a_list
    -- Everything happens within this loop
    set a_file to (item i of a_list)
    set fileInfo to info for a_file
    set theName to displayed name of fileInfo as string
    -- now theName contains the actual file name minus the extension
    At this point I don't know how to search for the mating file using Applescript. If I was in UNIX I could do a "find . -name filename" and parse out the path, but I don't know how this works in Applescript.
    I think I can figure out how to move the file once I have the path, but the search routine has me stumped for now.
    Any thoughts?
    Thanks!

    In my opinion your best bet is to take a 180° turn and simplify things significantly.
    Your current approach involves multiple file searches - for each file in the JPEG folder, search all the DNG folders looking for a match. That's an large number of searches, and a large number of something that AppleScript isn't great at.
    Instead you'd be far better off walking once through the DNG folders. For each DNG file look for a matching JPG file in the one folder that contains JPEGs. This would be exponentially faster - one walk through the filesystem vs. one walk through the filesystem for every JPEG.
    This should give you an idea of what I'm talking about (untested):
    global JPEGfolder
    on run
      set JPEGfolder to alias "Macintosh HD:DadTest1:DadA"
      set DNGfolder to alias "Macintosh HD:DadTest1:DadB"
      processAFolder(DNGfolder)
    end run
    on processAFolder(theFolder)
      tell application "Finder"
        repeat with eachItem in folder theFolder
          if class of eachItem is file and name extension of eachItem is "dng" then
            set basename to characters 1 through -5 of (get name of eachItem)
            try
              move file (basename & ".jpg") of folder JPEGfolder to folder theFolder
            end try
          else if class of eachItem is folder then
            my processAFolder(eachItem)
          end if
        end repeat
      end tell
    end processAFolder
    The idea here is that you start off in the top folder and iterate through each item. If the item is a file and it's name extension is DNG then try to move a corresponding file from the JPEG folder to the current folder. This is wrapped in a try block so the script doesn't fail if there is no corresponding JPG.
    If the current item is a folder then the script descends into that folder by calling itself.

  • Is there a way to search for a single problem IP in Incidents?

    How do I search for a single IP in Incidents?  Or  do I search somewhere else?

    You can run a query and enter the problem IP as the source or destination IP.
    Here's the configuration guide for your reference:
    http://www.cisco.com/en/US/docs/security/security_management/cs-mars/6.0/user/guide/combo/q_report.html

  • Search for folders or file on OS X Mavericks (10.9)

    I can't find folder when I make Search with new OS X Mavericks updated? I have 4 Tr HD when am looking for my file I have to make search but now search can't find files?????
    I already try this way Mac Basics: Spotlight but isn't working also, I use to do this search 100 time a day before I update my Mac, how I can do it now?
    Please attached file.

    Normally, Mavericks searches just like any version before. I just tried and mine finds folders just fine. The only thing I could think of is this:
    Try going to System Prefrences -> Spotlight and make sure folders are checked there
    Also, make sure that you have the correct tab selected at the top - in your screenshot, you are only searching through a single folder. Is that intentional?
    If that doesn't work try rebuilding the spotlight index: http://osxdaily.com/2012/01/17/rebuild-spotlight-index/

  • Searching for a single keyword in lightroom 5

    Hi there,
    I am a newbie to lightroom 5 and I am slowly learning the power of keywords.
    My question is,
    I have 1000's of images of my daughter in my catalog I have key worded all of them. There are some images with her on her own or with me, the mum, nan, granddad etc etc. I have also key worded the photos with, for example me. So on an image the key word is annie, nick. When I go to the 'text' search in the library list I type in annie and every single image of her comes up be it with me the nan, the mum etc. My daughter has hundreds of image with different family members. How do I just get the search to pick "annie" as the keyword and not the rest of the keywords in the catalog.
    For example,
    I know I can do a search like this, annie, !nick, !mum, !granddad etc etc, but this is so time consuming. Is there a character that can tell lightroom that you only want the image of annie with no one else or nothing else.
    I am aware you can select all of the singular images of my daughter and create a collection with just her but this is also time consuming.
    Another way this would be annoying is if you had images of trees for example, some trees might be taken by a water fall, mountain, road, picnic table or just one on its own. you might have hundreds of tree image on there own and hundreds of images of trees with a feature. If you try and search for just a tree or trees with nothing else in the image your search result is going to bring up every single image with a tree in it. Not just the images of a tree.
    Hope this makes some sort of sense. I have searched all over the internet and there doesn't seem to be an option for this. Or maybe I am missing something. If I'm not missing something and this just isn't possible maybe lightroom designers could look at implementing this search criteria in future updates.
    Regards,
    Nick.

    I have tried that and i think i am more confused. Its going to take me a while to learn this stuff. I have done the ! option and have narrowed it down to the images I want and have created a collection with just the images I wanted. I think I am going to have to think ahead with the keywording in the future. I will get there, its all trial and error at the moment.
    Its only a problem at the moment as I have an external hard drive so I have just added 'ADD" all images (over 4000) to lightroom from there as I want to save all future photos I do on the external hard drive. I am reluctant to fill my new IMAC with loads of images and take up loads of space. With photos I do in the future I will be saving on the imac probably and backing up on my external hard drive. The 4000 images are from the last year or so before I got this MAC.
    When I do future photo shoots etc it will be easier to move the images to the correct folders as I will be working on a lot less images. So I believe in the future it will be more managable. Trying to key word 1000's of images at the same time has confused me a bit.
    Cheers for you inputs peeps, appreciate it.

  • How To Search For a Specific File name?

    Hello Everybody
    How To Search For a File Like NewFile.txt in a Root Like C:\\
    And If The File Is Found Open It And Write In It?

    http://forum.java.sun.com/thread.jspa?threadID=5194090&messageID=9763314

  • How to search for all PDF files on my hard drive

    How can I search for all of a file type on my hard drive without getting documents that happen to have the text in them?  i.e. PDF or DOC or XLS
    Thank you
    Peg

    Put the search term in quotes, and do not forget the .  (dot)
    Results (partial list) of Spotling search for ".pdf". There is a section listing PDF documents.

  • How to search for names of files in a folder

    I've been searching this for awhile and haven't found anything so,I have a game and a game map editor or what not.. and you know when a user clicks on what map they want and such, but how can I search the files inside of a folder? I found JFileChooser but I don't really want to use that because it just wouldn't be right ... so any help would be nice, a link to somewhere, or another word to try and search
    thanks

    Look at the File API...
    list() or listFiles() methods will return an array with every file and directory within a directory.

  • Recently opening an HTML file on my computer makes firefox attempt a search for the entire file name in the search engine online, how to do i correct that?

    when opening an HTML file recently my Firefox automatically opens up a yahoo search screen and the file, the entire file name and route for the file is searched for online. I don't even use Yahoo Search i use Google but that doesn't mater have to open the file manually with searching it on on the open screen to read it because it's trying to search for it online instead of reading it from where i clicked on it.
    I.E.
    file:///F:/Reading/II.html
    would try to search
    https://us.search.yahoo.com/yhs/search?hspart=aztec&hsimp=yhs-default&type=derr_100_476&p=file%3A%2F%2F%2FF%3A%2FReading%2Fhtml&rnd=737753354&param1=sid%3D476%3Aaid%3D100%3Aver%3D15005%3Atm%3D264%3Asrc%3Dderr%3Alng%3Den%3Aitype%3Da%3Auip%3D1124173343
    I have no idea what the
    &rnd=737753354&param1=sid%3D476%3Aaid%3D100%3Aver%3D15005%3Atm%3D264%3Asrc%3Dderr%3Alng%3Den%3Aitype%3Da%3Auip%3D1124173343
    is for but it's never done this before.

    Please read this article about restoring bookmarks:
    http://kb.mozillazine.org/Lost_bookmarks
    As far as your passwords are concerned, I don't think there's anything you can do. But for the future, you can use the following add-ons to avoid any future loss:
    https://addons.mozilla.org/en-US/firefox/addon/2848/
    or
    http://www.xmarks.com/
    Both are good.
    And a simple way to import your bookmarks (since you already saved it on your desktop as html) is:
    Bookmarks / Organized Bookmarks / Import and Export
    Good luck.

  • Veristand Problem: When Configurin​​g a project, searching for a library file as a dependent file

    Hi,
    The problem that I am having is that I took all of the necessary files in order to run a project and moved it to a different computer. When I open Veristand, and try to configure the project, a pop up window comes up with "Search for Dependent File: [filename]". It then says the missing file and the search directory. You can also browse for the file. So, for about the first couple of files, I just browsed for it and it was fine. But when it reaches a library file, I try to open it and it opens the library inside of Veristand. I think it thinks that I'm trying to get the file from inside of the library instead of the library itself.
    Any thoughts greatly appreciated.

    Continued here
    LabVIEW Champion . Do more with less code and in less time .

  • I cant get the program to stop searching for a missing file

    i cant get the program to stop searching for a missing file

    You can uncheck the option that says automatically search for missing files in the prefernces window of Organizer.

  • Veristand Problem: When Configuring a project, searching for a library file as a dependent file.

    Hi,
    The problem that I am having is that I took all of the necessary files in order to run a project and moved it to a different computer. When I open Veristand, and try to configure the project, a pop up window comes up with "Search for Dependent File: [filename]". It then says the missing file and the search directory. You can also browse for the file. So, for about the first couple of files, I just browsed for it and it was fine. But when it reaches a library file, I try to open it and it opens the library inside of Veristand. I think it thinks that I'm trying to get the file from inside of the library instead of the library itself.
    Any thoughts greatly appreciated.

    Continued here
    LabVIEW Champion . Do more with less code and in less time .

Maybe you are looking for