Searching for a software to control temp of my macbook pro retina late 2013. SMSFanControl 2.2.2 doesn't work. THX

Hi,
All is in the title,
Need a good Software who sho me live Temperature of the CPU at least.
I usually use SMCFanControl but the last version does'nt work on new rMBP with Mavericks.
THX

Download istat menus:
http://bjango.com/mac/istatmenus/
Ciao.

Similar Messages

MST Support for MacBook Pro Retina Late 2013 - DisplayPort 1.2 - Will it ever happen? (with sources)

So back in October, I purchased a brand new Macbook Pro Retina (MBPr), fully loaded with top of the line specs. I was soooo excited to have Thunderbolt 2 tech which Intel AND Apple describes as having DisplayPort 1.2a compatibility - which up to this point is unfortunately NOT the case. The point of the information/questions and requests in this article is to engage a conversation about the issues of not having MST support after Apple falsely mislead their consumers to think otherwise - especially when it is clear the MBPr is capable. Please read on...
Apple advertises that the Thunderbolt 2 ports on BOTH the MBPr and the new Mac Pro (NMP) will have 4K Display support with the famed 20gb/sec Ports (DisplayPort 1.2 only requires a little above 17gb/sec). Now that the 10.9.1 update has been released, we have failed to see MST or Multi-Stream Transport enabled on the MBPr Late 2013. Now, as for the New Mac Pro- it DOES have MST enabled in 10.9.1 with the AMD GPUs. For all of you out there that's questioning what this means, short answer is basically the Mac Pro will be able to power a 4K Monitor at 60Hz through the Thunderbolt 2 Port but the New MBPr is stuck with only HDMI 1.4 support which tops out at 4K 30Hz. 30Hz is unacceptable for anything but movies or a photo slideshow. At 30Hz the cursor will jump across the screen, eliminating any of the benefits of 4K.
BUT it gets worse...
Apple can be seen advertising that the new MBPr 15" model can power a 4K monitor THROUGH the Thunderbolt 2 Port here: http://www.apple.com/thunderbolt - This article quotes the following:
"Now with Thunderbolt 2 built into the new Mac Pro and MacBook Pro with Retina display, you can connect the latest 4K desktop displays and get double the bandwidth for your peripherals. And the two generations of Thunderbolt technology are compatible with each other."
Does this not let the consumer assume that the newest MBPr will be able to drive a 4K display through the Thunderbolt 2 Port? I would say yes it does, but at the time I wrote this, the TB2 Ports can't power a 4K display because, as previously stated, MST is disabled in Mavericks for the 15" MBPr Late 2013.
NOW, later on Apple posted the following article on 4K support here: http://support.apple.com/kb/HT6008
4K support on the MacBook Pro (Retina, Late 2013)
MacBook Pro supports 4K displays and Ultra HD TVs at the following resolutions and refresh rates with the built-in HDMI port:
3840 x 2160 at 30 Hz refresh rate
4096 x 2160 at 24 Hz refresh rate (mirroring is not supported at this resolution)
In the article above the New Mac Pro is listed as having support for a 4K Display with the Thunderbolt 2 Port (or MST DisplayPort 1.2a Technology) at 60Hz with no problem. This leads myself and many others to believe that MST will NEVER be enabled on the newest MacBook Pro Retina with Nvidia GPUs. Yes, 4K IS supported but ONLY through the HDMI 1.4 port, which has the limitation of only 30hz. This two-faced advertising is extremely upsetting to a LOT of people, including myself.
Interestingly enough, THIS IS NOT a hardware issue. If one ventures into Windows 8.1 via Bootcamp and connects a 4K Display via the Thunderbolt 2 (or through DP1.2) Port, the Display registers at 60Hz, thus proving that the Thundberbolt 2 Hub Controller is completely capable of MST DisplayPort functionality. Clearly this a driver issue with Apple, Nvidia or Intel or any combination. What Apple has done here is forcing any professional that desires stable and clear 4K technology through their MacBook Pro Retina to do so only using Windows 8.1 on their own machines! Definitely an oxymoron if you ask me...
Later on when the Mac Pro was ready for ordering, Apple placed the Sharp PN-K321 as a compatible option for a 4K Display. On the Store page featuring the (over three thousand dollar) Sharp 4K display, located here http://store.apple.com/us/product/HD971LL/A/sharp-32-pn-k321-4k-ultra-hd-led-mon itor?fnode=53 Apple states the following:
"Note that 4K DisplayPort operation is only compatible with the new Mac Pro (Late 2013)."
All of that being said, and I'm terribly sorry for my wordy ranting...
This brings me to a final two requests to ANYONE reading this post:
a) Has anyone working with the new 10.9.2 Beta Update seen evidence that DisplayPort 1.2 capabilities will be enabled for the new MacBook Pro Retina (Nvidia 750M) with the promised "Graphics Driver Updates" within the next Mavericks update?
and
b) To others that purchased or were/are thinking of purchasing a new MacBook Pro Retina with TB2 Ports: If you are just as upset as me about this crushing blow to consumers that just purchased a $3,000 laptop that were promised something that wasn't delivered - I urge you please, write to Apple and let them know they are making a mistake. You can do this though the support page or through http://www.apple.com/feedback
Thank you for your precious time, and if anyone has anything to contribute to this issue, please jump in....

GOOD NEWS!
The Mavericks 10.9.3 update adds official support for Thunderbolt 2, 4K!
I'm not sure if you will be able to daisy chain anything to the 4K display. I've read that the design of Thunderbolt 2 includes support for DisplayPort 1.2 multi-stream (MST), which allows this type of daisy chaining with 4K, but we don't know if Apple has this supported on it's machines. Apparently it's been buggy in development because the graphics driver needs to work correctly with the Thunderbolt 2 host controller. I'm sure they will work it out if they haven't already.
The above is all via found information on this topic, but you can follow some more discussion here:
http://forums.macrumors.com/showthread.php?t=1713876
One more note on Thunderbolt worth sharing: always keep your fastest peripherals closer to the computer in the chain. If you have a TB1 device directly connected to the computer, anything further down the chain will be limited to TB1 speed/capability regardless of it's native speed. Always connect TB2 devices first, and save anything TB1 for the end of the chain.

HT201364 why i don't install mac os x maverick for macbook pro retina later 2013?

why i don't install mac os x maverick for macbook pro retina later 2013?

Welcome to Apple Support Communities
The Late 2013 MacBook Pro already comes with OS X Mavericks. However, if you try to download OS X Mavericks from the Mac App Store, you will get a message telling you that your MacBook Pro is not compatible, when it is.
This is caused because the Late 2013 MacBook Pro is running a special OS X Mavericks version which is different than the version available in the Mac App Store. This makes that you get an error message when you try to download OS X Mavericks even when you are using it.
Instead of downloading OS X Mavericks from the Mac App Store, you can still download OS X Mavericks to reinstall OS X through OS X Recovery > http://support.apple.com/kb/HT4718 You will be able to download OS X Mavericks from the Mac App Store when your MacBook Pro uses the same version as all other Macs

Macbook Pro Retina (late 2013) and support for two external monitor

Hi,
I have a Macbook Pro Retina 13" (Late 2013) and are looking to buy two DELL U2414 monitors. But after searching the web i´m a little bit confused if my MBPr will actually supports connecting two montors from one single Display port.
I will be using this montors at work where I use my MBPr with Windows7 (Paralllels).
I want to set up these two monitors with extended desktop not mirroring. The reason of using just one DP on my MBPr is that the other one is used by my wired ethernet connection. Will this work under OSX10.9.2 or 10.9.3?. Does my MBPr 13" support DP1.2a MST that is needed for daisy chain multiple monitors?

The hardware supports DP1.2 and MST but unfortunately at present OS X Mavericks does not.

Dual Dell Displays for my Macbook Pro Retina (Late 2013)

So I am looking at purchasing two of the new Dell Ultrashapr U2414H monitors to hook up with my Macbook Pro Retina. I have been trying to figure out the best way to connect both of the screens before I order them and I was hoping someone on here could offer guidance.
Connectors for the U2414H:
     1. 2 HDMI(MHL) connectors
     2. 1 Mini DisplayPort
     3. 1 DisplayPort (version 1.2a)
     4. 1 DisplayPort out (MST)
Also, if anyone has any ideas of a better monitor that I should look into PLEASE let me know. I am very open to suggestions on what types of monitors go the best with the Macbook Pro Retinas.
Thanks!!!!

I have just purchased a MBPr 13" along with 2 x Dell U2414h monitors in the hope of being able to daisy chaing the monitors. If i enable displayport 1.2 on both monitors then i end up with the 2 dells mirrored.
If i plug the monitors both directly into the mac over minidisplayport to displayport cables then i have 3 displays running (the MBPr and the 2 x Dell's). What i really want is to be able to daisy chaing 1 of the dells of the other one and then connect that one to the MBPr. But i cant work out how to stop them being mirrored.
Anyone actually got this working?

MacBook Pro Retina late 2013 not scanning for new WiFi networks

My late-2013 Macbook Pro w. retina screen is usually connected to my workplace wi-fi network.
Sometimes I need to disconnect from the usual network and connect to my Samsung S4's personal hotspot network.
I start the hotspot on the phone and I click on the wi-fi icon on the top bar.
Since a few weeks, the MacBook appears not to scan for new networks and does not show the phone's hotspot.
Earlier it used to display a "scanning for networks" message, and in a few seconds the phone hotspot's SSID appeared.
I am able to connect to the phone's hotspot using a workaround: from the icon, I click network preferences at the bottom of the list.
From the Network Preferences pane, in the middle, there is a droplist. I shows just the current network (the workplace network). I click the double arrow icon on the right and select "join other network". Then I cancel the popup window. The list now shows all networks around, including my phone's hotspot.
Is it a common/known issue? Will it be fixed? Thanks in advance

Apparently, the 10.9.2 update fixed this.
the "Wi-Fi: Looking for Wi-Fi networks..." is back.

Macbook Pro Retina Late 2013 96C temp -- normal??

I've had my MBP-retina for about 3 months and I've notices some heat problems to the point where it's really hot to touch above the top keys, in fact right now it could burn my finger if i held it there. It says the temp is 96C. The fans were not going above 2000 rpm so I downloaded an app and I boosted up the fans to 4300 rpm and now it's at 71C. I'm not really doing anything but using google chrome and working in Adobe Illustrator.
So,
A) What temperature should the fans come on at?
B) Is this normal? Should I be worried
Thanks,
L

So I just got back from the apple store and wow, what rude service. The guy basically shrugged when I told him "Well, I guess Im stuck with it huh?" after he told me there was no way I could get a refund. He performed a test and told me everything was fine and told me in a very arrogant manner that the test isn't showing the results I told them about as if I was lying....***? He said they can send it away for a few weeks but I don't have any other computer and I just bought this one for school so I can't afford to have it gone for that long. He told me "doesn't your school have a computer lab"? Seriously, how can someone at Apple be this rude? I told him they do but its closed at 7 and I dont live on campus. How could a computer lab replace a personal computer? He basically kept shrugging rudely anytime I tried to find a solution. He didn't even reply with a single word. When I told him I called the call center and they told me that yes it is much too hot and to take it to the store after doing a fix he just chuckled and rolled his eyes. Really? I spent 1500 dollars on this computer to not even be able to do basic things on it without it overheating and the service is this bad? Well, looks like I won't ever be buying an apple product again even though before this experience I was a huge fan of all their products. I know one customer doesnt make a difference to them but come on...looks like I'm stuck with it and apple couldnt give one care. If having your hands uncomfortably hot after a small amount of time is acceptable then it looks like I'll never be buying another laptop from them. Its a shame I really liked it at first.

Too hot for my macbook pro retina 15 2013 late

I bougt my macbook pro retina 15 2013 late 2 days ago,
I found it is easily to be in high temprature.
I extended 2 external monitors for my mac , is it the reason to make my mac so hot?
the most cpu usage is idle.

Welcome to Apple Support Communities
When you connect an external display, the dedicated GPU is used. This GPU generates more heat and needs more power, being this probably the reason why your Mac is hot. It also depends on the applications you use, but in this case, I do not find any application that takes a lot of processor and RAM.
Anyway, those temperatures are still not dangerous. Fans should be working to decrease the temperature.

MacBook Pro 15 (Late 2013) - OS X Parental Control Account keep showing in Arabic language!

Hello,
I brought MacBook Pro 15 (late 2013) at local Apple Store. After setting up Mac, I observed that in Parental Controls, the default account name is showing in Arabic language. I verified Mac language settings and are set to English.
No 3rd party apps installed except Microsoft Office, Adobe Flash Player and VLC Media Player.
Is this new kind of malware?
Any further help would be appreciated. Thank you!

Guest User Account Advanced Properties

Aren't the pages,numbers,keynote free for macbook pro retina late 2012 users?

Aren't pages, numbers and keynote free for macbook pro retina late 2012 users?

Free if you have iWork '09 on the MBP.
SG

After upgrading to Yosemite, MF 820 ZTE Telenor USB modem does not start, system slow down dramatically / Macbook Pro Retina late 2012/. Also Thunderbolt plug in for Ethernet make the same ! Any idea ?

After upgrading to Yosemite, If i plug in my Zte MF 820 LTE modem into my Macbook Pro USB socket or a Thunderbolt USB Ethernet converter/ into my Notebook, it slow down dramatically the system, unusable, need to reboot and unplug the USB moderm or Thunderbolt interface. So it does work only without any plug in device..!?
Any idea ?

How To Run Telia ZTE MF820D 4G Modem On Lion
Open Network Preferences
Choose the ZTEUSBModem interface
Set “Configuration” to Default
Set “Phone Number” to *99#
Leave “User Name” and “Password” blank.
Check the “Show modem status in menu bar” checkbox for convenience.
Click “Advanced…”
Set “Vendor” to Other
Set “Model” to ZTE USB Modem.
Now click the little phone in the menubar and choose “Connect” from the dropdown.
Link: http://walternaeslund.com/how-to-run-telia-zte-mf820d-4g-modem-on-lion/
I'm using MacBook Pro Yosemite 10.10 and a MF820 too.I had a same problem before.But Now already fixed.
Hope this can help you.
Regrad
Amare YSL

MacBook Air, MacBook Pro Retina, or Non- Retina for academic high school student?

I will be going into high school in September and am thinking of getting a MacBook for school. This is my first computer except for the family PC desktop. I am in all academic classes, and am taking business and exploring technology ( designing and building things) I would use the laptop for schoolwork as well as gaming ( nothing too intense, just stuff like portal and Garry's mod), internet, iTunes, and ilife. It will be a gift from at least 7 people, so price is important, but not a huge factor. I think a 13" screen in perfect for my needs. Would a MacBook Pro Retina, a MacBook Pro non- retina, or a MacBook Air be the best choice for me?

If you use DVDs and CDs more than often (most people don't) then go for the MacBook Pro nonretina. I would go for the MacBook Air or pro retina because their graphics cards are much better then get a $40 usb DVD drive to load movies and other content. The MacBook Air and MacBook Pro retina also have "flash storage" and haswell chips making them super fast at opening files and applications and boosts oversell performance. You sound like you're not going to be doing any editing or graphics intense work so I would recommend the MacBook Air with 8gb ram and however much storage as you want. For around $100 more you could get the MacBook Pro retina that has the amazing display and better graphics. In the end, if the retina display would be the only real upgrade for you and price is in consideration, I would recommend the MacBook Air (also apple usually releases new model macbook airs in June so you could get one now or just wait. I would wait).

I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed. How can I upgrade my OS to 10.6 or better?

I would like to connect a printer that requires OS 10.6 or newer. My MacBook is currently using OS 10.5.8. In searching for a software update, I am told no updates are needed (and am given no option for updating my OS). How can I upgrade my OS to 10.6 or newer?

You have to understand the difference between an Update and an Upgrade.
An Update is a free change to add to the base code or as a bug fix within an existing Operating System. Such as the .8 added to OSX 10.5 or the .11 added to OSX 10.4..
An Upgrade is a complete new Operating System that must be purchased. Such as 10.5 Leopard to 10.6 Snow Leopard.
10.5 Leopard was written for Power PC Macs with code added to force it to run on Intel processors.
10.6 Snow Leopard has completely rewritten code and only runs on Intel Macs.
10.7 Lion ($19.99) used some 32 bit which allows it to run on Late 2006 through Early 2008 MacBooks and a lot of 64 bit code.
10.8 Mountain Lion ($19.99) is pure 64 bit, which excludes more systems than Lion did. It can only run on the Late 2008 through Mid 2010 MacBooks. It's not something you can add memory to, for example, as it involves the base architecture.
10.9 Mavericks is pure 64 bit and is a free download from the App store.
The 10.6 Snow Leopard DVD is in the Apple online store. You can get it for $19.99. http://store.apple.com/us/product/MC573/mac-os-x-106-snow-leopard After you’ve installed that then download the 10.6.8 combo updater to finish it off. http://support.apple.com/kb/DL1399 You will need to be running 10.6.8 to access the App Store to order Lion, Mountain Lion or Mavericks which are downloads only.
System Requirements for 10.6:
Mac computer with an Intel processor
1GB of memory
5GB of available disk space
DVD drive for installation
Some features require a compatible internet service provider: fees may apply.

Searching for an app to control ipad using iphone

Hi, I am searching for an app to control iPad from iPhone similar to team viewer.
My parents were not familiar to the iPad, so to solve the issue i need to control it from my iPhone.
Any suggestions please.

If you are in side the building & using wifi, you could look into:
http://itunes.apple.com/us/app/filebrowser-access-files-on/id364738545?mt=8
Configure WebDave on your server.
This thread has good info.
https://discussions.apple.com/thread/3708341?tstart=0
Good old FTP
FileApp and FileApp Pro
If you can convince them to let you near your desktop, an app like ... would let you transfer files ( according to how I read the doc..
http://itunes.apple.com/us/app/desktop-connect-pro/id421602383?mt=8
Robert

Searching for Mac Software

Is there a way to search for Mac software at http://www.apple.com/downloads/?
Thanks.

Thanks, Michael, for your response. I was actually looking for a way to search for apps by subject, kind of like how App Store works for iPhone apps. For instance, if I type in 'mail' in the Search box in the iPhone Apps Store it will search for all apps in the mail category. The search box for apps at apple.com does not appear to work like that. Is there a way to search for Mac apps in a particular category?
Thanks!

Searching for a software to control temp of my macbook pro retina late 2013. SMSFanControl 2.2.2 doesn't work. THX

Similar Messages

Maybe you are looking for