Searching for Access Point Report by SSID on the WCS

Hello,
im searching for an option to make a Report on the WCS (Software Version 6.0.170.0 ) to see all SSIDs that are ratiated in detail by the Access Points.
I mean something like this: (example)
AP 1   - SSID 1 and SSID 2
AP2   -   SSID 1
AP3   -   SSID 3 and SSID2
Or is they any other alternativ to see that on the WCS or WLC?
Thank You

Hi,
The "AP SUMMARY" report will provide you the AP group to which the AP is mapped to.. here by we can come to know what all WLANs are getting broadcasted by the AP..
REPORTS LAUNCH PAD >> DEVICES >> AP SUMMARY >> NEW.
Lemme know if this answered ur question and please dont forget to rate the suefull posts!!
Regards
Surendra

Similar Messages

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0

How can I get CDP neighbor information from access point reports in Cisco Prime 2.0? I have looked through all the reports and I cannot find a report that gives me the CDP neighbor information of an access point. I thought that information was in there, however I cannot seem to find it.
Thanks in advance!

Hi
You can get this from an inventory report in PI (Select Report Type AP). Here is an example of PI 2.1 works for me. Once you export this into excel you can sort based on controllers & filter the single controller connected AP you want.
Regards
Rasika
**** Pls rate all useful responses ****

"Low-level" authorizations for accessing BW reports - add users to role

Using the advice in Topic "Low-level" authorizations for accessing BW reports, I have been able to publish a query to a role that has 3 test users and each user gets the same query but with different data, as determined in the tables.
Is there a way to look up the users and e-mail addresses from a table and associate them to the role? We have several hundred e-mail recipients that will not need BW access, but only need an e-mail with a static report that contains data on their own territories.

Hi!
i think programatically it might be complex. You got to maintain a seperate variant of report per user and use this variant to send mail. that means you need to maintain a variant and a Broadcast setting per user. once maintained you can use it any number of times the values will be recalculated everytime.
with regards
ashwin
<i>PS n: Assigning point to the helpful answers is the way of saying thanks in SDN. you can assign points by clicking on the appropriate radio button displayed next to the answers for your question. yellow for 2, green for 6 points(2)and blue for 10 points and to close the question and marked as problem solved. closing the threads which has a solution will help the members to deal with open issues with out wasting time on problems which has a solution and also to the people who encounter the same porblem in future. This is just to give you information as you are a new user.</i>

Multiple Cisco Aironet 1131AG access points and same SSID?

We have multiple Cisco Aironet 1131AG devices, all wired on one Cisco L2 switch(2560) who is connected to L3 switch (3550). We assigned one VLAN for access point in L3 switch who acts as vtp server (L2 switch is vtp client). All ap's will have static ip address and all will have same SSID and no security and they will be using multiple channels (ex. 1,6,11). They will operate in 3 floor building for roaming wireless client. We won't using any wireless controller.
So my question is this: How to configure APs-all the same with different ip's, can we use L3 switch to create dhcp server for access points VLAN (pool for clients, and the rest for static ip for ap's)? Can one of the ap's be WDS and in the same time local radius server with users without Cisco Secure ACS or similar controller or I didn't understand this quite well :-). I followed guide http://www.cisco.com/en/US/docs/wireless/access_point/12.3_2_JA/configuration/guide/s32roamg.html for WDS where the part abou Cisco ACS is a problem, so I can use same ap as Local Authenticator as in guide http://www.cisco.com/en/US/docs/wireless/access_point/12.3_4_JA/configuration/guide/s34local.html#wp1035723.
Many thanks...

Well, just so you know, WDS and local RADIUS authentication is only needed if you're using authentication on your wireless connection. You say you're not planning to use security, so this isn't necessary. However, I'd highly recommend at least using a simple WPA2-PSK to lock down your connection, otherwise you might end up giving free Internet access at best, and at worst you might be giving access to company PCs and servers. If you want to further use an 802.1x or WPA authentication method, then yes, you can use an AP as a RADIUS server and WDS to improve authenticated roaming, but this is far more limited than using a Cisco ACS.
As for your other questions, yes, your APs can all be configured the same except for at least three parameters: IP address, channel, and hostname. Configure your static IP addresses on the AP's BVI1 interface. Don't place it on the Radio or Ethernet interfaces, because if either of these interfaces goes down you'll lose the ability to configure the AP, so it's best to use the BVI1 interface.
And yes, configuring a DHCP scope for your clients on your L3 switch is a good design, or you could also use your DHCP server on a different subnet by using the ip helper-address command on the L3 interface. I hope this helps! Let me know if you need help configuring any of this.
Merry Christmas!
Jeff

Search for SCN Bug Reporting is broken

Hi
See my comments in the pic below. The bug search is broken.
I can enter a search term, and even the URL gets updated.
But the results are not refreshed. SAP IT has given me a new IE10 today (see further below).
can this be checked please.
( i have seen there are a bunch of other reports on broken searches, they seemed to be about different issues imo )
Pieter

I've checked in IE11. Its working fine for me.
Searching for "Link is"
Then I have changed the text as "Render"

Syslog server for access points

Hello,
On the controller, when you look at an access points config. There is the syslog server for the access point with the default ip address of 255.255.255.255. I was wondering if there was any way to disable the syslog server for the access points. The only thing I've found so far is that the ip address of the syslog server can be changed.
Thanks,

i am not sure if "no" command works.
but on 5.2 ver
config logging trap disable global
disbale/ enable is the key to set the ip address for syslog server

How do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

how do i search for a photo album when i use the search facility on my iPad or iPhone it will not find photo albums of a given name can anyone help

Photo albums are not searched by Spotlight Search. Go to Settings > General > Spotlight Search to see and reorder the available search items.
For more details, see page 12 of the iPad iOS 5.1 User Guide

When i try to search for contact or create a new one the keybord does not come up

when i try to search for contact or create a new one the keybord does not come up

Try going to settings to General to reset to 'reset all settings'
This should do the trick!
Good luck

If I'm reading a book on the iPhone and I want to pick up where I left off on my iPad, do I have to search for what page I was on on the iPad or is there a way to sync it?

If I'm reading a book on the iPhone and I want to pick up where I left off on my iPad, do I have to search for what page I was on on the iPad or is there a way to sync it? Or do I just have to search for a string of text from my iPhone on my iPad?

On both devices go to Settings>iBooks>Sync Bookmarks>On. Then when you want to quit reading on one device, tap the bookmark in the upper right corner and it will turn red. That marks your place. Close the book on the device now by tapping on the Library button in the upper left corner of the app. That will put the closed book back on the shelf. Tap the home button.
On the other device, when you tap on the book, it should open to that page. You have to be connected to WiFi in order for this to work. You can read this older discussion for more information. I was involved in that as well.
https://discussions.apple.com/thread/3754714?start=0&tstart=0

HT204266 how to search for a specific app eg tetris in the app store?

Hi is there anyone that can please help me on how to search for a specific app eg tetris in the app store? Thanks

Hi Friend,
You just write down the name of the app or for what the app is used for (eg, write down Notes and then will appear a lot of options), then download what you wish.
Hope it will be helpful

Problem "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider for linked server"

hi
i'd like to ask question about linked server.
my linked server used to work but now when i try to select from linked server i was told "The OLE DB provider for linked server reported an error. The provider reported an unexpected catastrophic failure Cannot fetch a row from OLE DB provider
for linked server"
but in fact for test connection i was told "the test connection to the linked server succeeded".
could anyone help me? thank u very much
best regards
martin

Hi,
In addition to Tracy's post we have to know those answers as well:
* what provider are you using for the connection
* what do you connect to
for example, if someone try to connect to oracle using sql server provider then several simple queries are going to work probably OK, but once you are trying to use T-SQL or any complex SQL query then the errors are starting.
please post the connection string (without the password!) + the query that you are trying to use.
[Personal Site] [Blog] [Facebook]

TS1398 When I try to connect to the wifi it will not unlock. It will not even search for a network. I have reset the phone and reset the network. Any ideas.

When I try to connect to the wifi it will not unlock. It will not even search for a network. I have reset the phone and reset the network. Any ideas.

I Can do that for home but not at friends and work places, nobody else has any problem joining it!! I'm wondering if restoring factory settings will solve it but don't really want to do that as its a hassle to reinstall everything for it to not solve the problem!!

How can I get alerts if a Wireless Access Point has been disconneted from the network?

How can I get alerts if a Wireless Access Point has been disconneted from the network?
Is it possible to get alerts via email from the WLC or WCS if Access-Point has been removed from the network?
Thanks in advance.

Hi,
The below link will answer ur question!!
http://www.cisco.com/en/US/docs/wireless/wcs/7.0/configuration/guide/7_0event.html#wp1229996
Please dont forget to rate the usefull posts!!
Regards
Surendra

I'm using 3G3 16gb and just upgraded to 4.3.3. Tried activating bluetooth to use Personal Hotspot for my laptop. But the iphone keep searching for devices thou my laptop can detect the phone. Does anyone know how to solve this?

I'm using 3G3 16gb and just upgraded to 4.3.3. Tried activating bluetooth to use Personal Hotspot for my laptop. But the iphone keep searching for devices thou my laptop can detect the phone. Does anyone know how to solve this?

Hi NWL1,
Thanks for the question. If I understand correctly, the iPhone won't update and is stuck. I would recommend that you read this article, it may be able to help you resolve or isolate the issue.
If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
Thanks for using Apple Support Communities.
Have a great day,
Mario

Single access point with multiple ssids and single channel possible?

Hi everybody.
I have this silly question.
Let say we have three vlans, vlan1,2,3 and they are mapped to wlans as follows:
Vlan 1 ssid1
Vlan 2 ssid2
Vlan3 ssid 3
AP --------trunk------Switchted network.
Our Ap has mobile devices in three wlans, i.e ssid1ssid2 and ssid3
Since AP uses half duplex mode, mobile devices need positive ack from ap before they can send data, therefore once channel let say channel 3( assuming 802.11b is used) can be shared by all mobile devices in three wlans.
Is my understanding correct?
Thanks and have a great weekend.

Hii ,
Yes ,that is pretty much possible as suggested by other experts on board. Depending on your access point you will have 1 (2.4 GHz) or both 2.4 & 5GHz radios.
You can configure multiple SSIDs (up to 16 ) known as MBSSID mode in autonomous environment. In Controller based architecture you can configure up to 512 WLAN (SSID) and transmit any 16 of them per AP (using AP group feature). However , it is recommended to keep multiple SSID count below 8 as for each SSID separate beacon will be sent on air which consumes more air time.
Hope this helps
Thanks
Vinay

Searching for Access Point Report by SSID on the WCS

Similar Messages

Maybe you are looking for