Searching for an iPad Mini POS for Use with Square.

I am trying to set up an iPad mini for use with square POS. I would like a stand with built-in card reader and an automatic cash drawer. I do not want a receipt printer. Does anyone have any experience with this setup?

I would allow another one hour to trickle charge the battery (i.e. 4+1=5 hours)

Similar Messages

  • What products are available to connect a electric guitar to a IPAD 4 for use with garage band???

    what products are availabe to connect an ipad 4 with electric guitar for use with garage band???

    I know this will sound a bit snarky but the best source for information is an Internet search. Typing in "connect guitar to iPad" produced pages of products. This one looked interesting to me...
    http://www.apogeedigital.com/products/jam.php?gclid=CPSpza6q2bQCFU6mPAodpmcAqg
    I don't recall if the iPad 4 has the new lightning connector or not. If it does you'll probably need a  30pin-to-lightening adapter.

  • HT204149 What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

    What is the maximum resolution available for use with the Apple Mini DisplayPort to Dual-Link DVI adapter?

    Hey guys,
    I found out an answer by myself...
    The missing link : the MacBook Pro needs to be powered... as in you need to plug the charger in...
    In conclusion, you simply plug everything, turn on the MacBook Pro, close the lid, and there you go !

  • I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID

    I have a company Ipad that belonged to a deceased employee. no access to his icloud or appleID. how can I restore it for use with a new apple ID?
    The apple ID was his personal account and can no longer gain access. Im sure I can get purchase recipts from the accounting department if needed. I tried to put the Ipad in restore mode and used itunes to "recover" the ipad but it still wont let me in because he registered the device with the "lost iphone" feature or whatever that is.

    Activation Lock in iOS 7  >  http://support.apple.com/kb/HT5818
    The Apple ID and Password that was Originally used to Activate the iDevice is required
    If you do not have that information you will not be able to use the Device.

  • Problem with Hp Photosmart D110a for use with iPad 3G

    I have just bought an HP Photosmart D110a for use with iPad 3G but this printer could not be connected to Internet, can anyone tell me what the problem is?

    Hi,
    Do you follow the setup guide ? What is the error ? Looks like your printer is not Airprint ready therfore you need to set it up for ePrint. 
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • HT1665 I have a World Travel Adapter Kit for use with my iPad. can the plug adapters also be used on the Mac Pro charger to charge up my laptop when travelling or is a special converter needed.M

    I have a World Travel Adapter Kit for use with my iPad when traveling abroad. I know this charger can be used on an iPhone, can the plug adapters also be used with the charger of a Mac Book Pro or is a special converter required?

    Is there any concern about the type of travel adapter kit? For instance, some instructions indicate they are for heat creating appliances (hairdryers, curling irons, etc.). I bought such a set, but do they present any issues if used with more delicate electronic circuitry (for iPads, iPods, or with camera battery chargers). I am leaving for the UK on Monday and need to get it right - are they too strong for the Apple products if they are not to be used with computers? What other options are out there?

  • I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    I currently have a D-Link DI-604 broadband router with windows computers.  How can I add wifi to the network for use with ipad?  Can I use AirPort Express?

    Yes. You can directly connect an 802.11n AirPort Express Base Station (AXn) using an Ethernet cable. The AXn would then just need to be configured as a bridge to allow the D-Link to continue to provide both NAT & DHCP services for all network clients connected to either router.
    In this configuration, the AXn would broadcast a wireless network for your wireless network clients to connect to.

  • Is Ipad air who bought from USA compatible for use with European carriers?

    Is Ipad air who bought from USA compatible for use with European carriers?

    there is only 1 ipad air being made

  • I heard there is a new Apple TV for use with apple ipad air. Is this true?

    I heard there is a new Apple TV for use with apple ipad air. Is this true?

    Re: I heard there is a new Apple TV for use with apple ipad air. Is this true?

  • Best POS system for use with Mac?

    What is the best POS system for use with Mac?  Using Quickbooks and paper invoices and inventory.  Would like to upgrade to POS system.

    Ideally it is best to have seperate (discreet) EHD's for a PC and Mac due to their differences in HD formatting. However, this is not always feasable but there are alternative solutions availble. Among those are:
    Creating and useing a Dropbox account that can be shared by PCs, Macs, IOS and Android devices. Dropbox allows for 2GB of free storage and additional storage is available for a small monthly fee.
    Another possiblity is formating an EHD so that it may be shared by both a PC and Mac, this format is FAT 32. The downside of doing this is the size of the files written to the HD are limited to 4GB.

  • Min max lot size time based for use with SNP and PPDS

    Hi all, Is there anyway to set up time based min and max lot sizes? ie we want to have a Max lot size which is small for use with the first 3 months of our plan which starts life in SNP and then converts to PPDS and into blocks for block planning, but months 4 to 36 we want to leave as large max lot sizes as there is no need to have the small max lot sizes for the different horizon.
    As far as I can see there is only a material/plant lot size  and Max lot size and no way to have a different setting in a different time period.
    Thanks
    j

    Hi John,
    As you know, in the product master, the lot size maintenance is time-independent, so that obviously can not be used for your scenario. As per my understanding, to meet this using standard functionality, you can maintain multiple product specific t-lanes (for STRs) and PDSs (planned orders) with required lot size ranges and validity dates (for short or long term horizon). But, again since the validity of t-lanes and PDSs will not be automatically rolling forward so the updating the validities will be a challenge.
    The other option could be to enhance the heuristic functionality at lot size selection step while creating order.
    Regards,
    Umesh

  • My iPad mini is not syncing with my MAC. I'm trying to sync my photos using iTunes but it's not working. Help???

    My iPad mini is not syncing with my MAC. I'm trying to sync my photos using iTunes but it's not working. Help???

    Hello, flippytippi.  
    Thank you for visiting Apple Support Communities.
    I would need a little more information regarding what exactly you are experiencing when attempting to sync photos to better assist you.  However, here is a troubleshooting article that I would recommend going through.  
    iTunes: Unable to sync photos
    http://support.apple.com/kb/TS3697
    Cheers,
    Jason H.

  • Getting a "waiting..." or "installing..." message after sideloading an Enterprise signed app onto iOS 7 iPad Mini (among others) using App Builder 3.1.0.

    Getting a "waiting..." or "installing..." message after sideloading an Enterprise signed app onto iOS 7 iPad Mini (among others) using App Builder 3.1.0. The app icon remains "dim" on iPad desktop with one of the two messages. The messages change depending upon sync with iTunes or power-up from a shutdown. Tried assigning v30 and v31 as viewer versions, neither appear to work. The certificate signing appear to work without incident. The appropriate profile appears correctly within the iPad does not show it is expired.

    This happens when the mobileprovision file does not include the device ID of the device you are attempting to install onto. You need to recreate the .mobileprovision file and make absolutely sure the device ID for the devices are included.
    Neil

  • Partitioning an ext. HD for use with Time Machine HFS+/FAT32

    Hi, I hope that this question is not already answered somewhere - I did a couple of searches but couldn't find the answers I need.
    I'm setting up an external LaCie 500GB HD (USB 2.0) for a friend, in order to use it for Time Machine backups (one partition) and as a non-backuped "data dump" (music / films etc.).
    My plan is the following: Partition the ext. HD into a 200 GB HFS+ Journaled partition for use with Time Machine, and a 300 GB FAT32 partition for data (FAT32 to ensure the interoperability with PCs).
    I have a couple of questions (apart from if you think the proposed setup is good in general):
    1. The Time Machine partition would be used to back up a MacBook with a 120GB HD - in your opinion, is 200GB too much/enough/too less space?
    2. In general, does Time Machine work with partitions on ext. HDs as seen in the setup I propose? (or should I use a drive with only one partition?)
    3. are there any possible problems I might run into when partitioning a drive into two different file systems as HFS+ and FAT32?
    4. Is it OK to use the Leopard Disk Utility for this or should I use another application?
    thanks a lot for your answers!

    Hi,
    Could you please share the answers you found?
    I'm going through a very similar situation...
    Thanks!
    Beto.

  • How does one transfer CS5 actions for use with CS6?

    CS6 installation, which was uneventful, has transferred none of my actions from my copy of CS5. The CS5 actions are located in the actions folder of the APPLICATION/PHOTOSHOP CS5/PRESETS/ACTIONS.  The "actions" folder in application support/adobe in my library is empty, and has always been so.
    Only the CS6 default actions are located in the same folder for CS6.
    I use imac i7, lion.
    Note that i also have CS3 and CS4 on my machine. This due to recent upgrade to CS5 and recent upgrade to LION, and my general paranoia.
    Must i load each action into CS6, one at a time?
    thanks to any and all.
    vince

    Re: how does one transfer CS5 actions for use with CS6?
    On a Mac - There are multiple ways to do this.  I have done them both ways. In order to do this you need to know where you have your actions stored, and you can move them all at once if you have them stored in the same location.
    1. You can load an action ONE AT TIME into your actions palette by:
         A. Open up the action palette and click on the little arrow with 4 little horizontal lines next to it on the upper right corner of the actions palette.
         B. Select "Load Actions" and a Finder window will open up and you can search your computer through this window for your actions.
         C. Click on the action from the Finder window then click 'Open' at the bottom right of the finder window.
         D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens- click on 'Save Actions'. It will select the location where the          actions are currently stored as the place to save them. If you want to change that path, you can do it at this time in the little path window.  I just leave it, since I keep all my actions stored in the same file.
    2. TO MOVE MULTIPLE ACTION SETS AT ONCE
         A. Open up CS6 (or CS5) and move the Photoshop workspace it to the right side of your computer screen so you can see your desktop on the left side.
         B. Open up your Finder search window from your dock (the square blue head icon thingy for those who are new to photoshop). Move this to the left side of your screen so you can see the Photoshop work space on the right and the Finder window          on the left. In the Finder window, navigate to the file where all your actions are stored, select all the actions in the file (command+A will select everything in the file if you are actively inside the open file) or you can select multiple files           individually by continuously holding down the command key and clicking on the different actions you want to move.
         C. With the Photoshop workspace visible on the right, and the actions palette open so you can see that the actions actually transferred - In the Finder window, click the selected actions you want to load and drag them over to the Photoshop           workspace.  I did this without an image open, I just dragged them onto the empty workspace.  The actions should all appear immediately in the actions palette that is open.
         D. To save these so that they appear every time you open up your actions palette, go back to the little arrow at the top right of the actions palette and when the drop down window opens click on 'Save Actions'. It will select the location where the           actions are stored as the place to save them. If you want to change that path, you can do it at this time in the little path window.  I just leave it, since I keep all my actions stored in the same file.
    I hope this helps. 
    and I hope there are no typos. 

Maybe you are looking for