Searching for apps not showing the desired apps

On 6/28/2012 at around 4 PM EST, I searched for the app "Chrome" on my iPhone 4 running iOS 5.1.1. I wasn't shown the Chrome browser in the search results. However, when I search for the same app on iTunes on my mac, I can find that app. I don't want to synch my phone to my comupter just to install this app. Any idea why might this be happening. This isn't the first time, it has happened before too. BTW my account is US iTunes based account.

But this issue always happens, whenever there is a new app. I have to wait for a day or two or install it by synching the phone to my mac. I just want to throw it out there, so that I know if this happens to others or just me.

Similar Messages

Running Apps not showing up in app-switcher with Lion

One peculiar issue I am running in to is that, as the iMac is running for awhile, some of the running apps suddenly no longer appear in the app switcher window (command-tab). they are clearly running, but cannot be switched to. this is very frustrating. Even quitting these apps and re-launching them will not make them re-appear in the switcher.
The only thing that cures this issue (temporarily) is to log out / log back in or reboot the iMac.
Anyone else run in to this, is there a solution to this problem?

Temporary fix that I found online, WITHOUT restarting is to type
killall -KILL Dock
in the Terminal

Iview for UWL not show the tab(Taks, Alerts, Notifications, Tracking)

Dear experts.
I am facing the following issue.
In the MSS for the Workset: Work Overview , for UWL the system not show the tab(Taks, Alerts, Notifications, Tracking), ie the system not show none tab, show a page in blank.
My question is: What is the cause of this issue?
Thanks in advance
regards

use the standard role for UWL, ie check if you are using any modified XML for uwl
This happens if you use custom XML and hide the tabs
Enable the support information for UWL and check in UWL administration
check here
https://www.sdn.sap.com/irj/scn/wiki?path=/display/bpx/uwl+faq
http://wiki.sdn.sap.com/wiki/display/TechTSG/%28UWL%29Navigationnodeca
nnotbeselected
If you only have the .tra and .001 files on the system (and the
standard files) then you can proceed as follows:
So what do we need to do to fix this?
This is a known issue with the MSS system and the generated XML f
However, the fix is quite simply achieved...
For both the .001 and .tra xml files you will need to do the foll
1. Download and save your config for both com.sap.pct.erp.mss.001
com.sap.pct.erp.mss.tra:
2. Open the saved version and save the file with a new name.
Access the configuration file within the zip file and proceed to
the following changes:
I would like you to navigate to the following place in your XML f
<! Work Center UWL shows the same
entries as Control Center UWL >
<NavigationNode name="root"
view="" referenceGroup="">
For every navigation node that has a full path assigned I would l
you to delete up to and inclusive of the last full stop that is
listed in the node. Here is an example for you:
a) first node identified is that fits the criterion above is:
<NavigationNode name="com.sap.pct.erp.mss.Alert"
or check here
system admin, system config
UWL and Workflow
UWL adminsitration
Click to Configure Item Types and Customize Views Using a Wizard
Customize the look of the UWL main page
Select the alerts tab
Click the remove tab from current view button
Then click save and return. The tab is now gone from the UWL UI.

The check box for syncing apps not showing in iTunes Apps page

My new iPad is syncing Books, iTunes U, Movies and Music but not Apps. When I look in iTunes on my iMac the option box to sync apps is not there. It just says Apps all the other pages, Music, TV Show, Podcasts etc. have a check box for syncing. Any idea why Apps does not?

In the iTunes User Guide it shows a sync check box next to Apps as you can see it's not there.
I do see the Sync check box for Music, Movies, etc.

Why can't I be able to search for a location in the HTC app?

So, it shows weather for my current locations just fine, but when I search for a specific location it won't find it! The only time it shows weather is when its your current location. And it finds a few areas, such as Anchorage, Alaska. But I would like to know if this is a bug because it should find the locations I search for. And, I do have other weather apps but I want to know why the HTC app isn't working. Thanks!

Hi Lizneedshelp,
Oh No! I'm extremely sorry to learn that you may be having issues with the HTC weather application on your device. I definitely understand how important it is to make sure this application is fully functional at all times. Do you mind sharing what the exact name of this application is? Are you referring to the imbedded weather application that cam on the device? Please share details, thanks!
Matthew_VZW
Please follow us on twitter @VZWSupport

Health app not showing the curve on graph

hello , my health app stopped the curve progression suddenly i tried to reset my phone and force the app to stop but still the same knowing the the day view show that the data is regIstered.... Any help please...

I take it you have already gone into the Health app and set up your Medical ID card, correct?
The Medical ID card will show up on the Lock Screen password entry screen when Emergency option on the bottom left-hand side of the screen is clicked.
It does not show up anywhere if you do not have a passcode lock on the screen.
Cheers,
GB

Why Is the rate my professor app not in the itunes app store?

I am not sure if it is just my phone, but a few of my peers with an IPhones have the rate my professor app. When I go to the app store and search "Rate my professor" the app doesn't show up. If anyone can assist me on what I should do it would be greatly appreciated.

It isn't just your phone. I found a link that should have directed me to the download but it gave the message that the app is not currently available. That can happen if an app has been withdrawn for a pending update or for any other reason. Also if you do an internet search for the app, it return the following website http://www.ratemyprofessors.com/iphone/ but using that link results in a page not found. Following is a link to their contact site where you may be able to get more info http://www.ratemyprofessors.com/ContactUs.jsp

Function used in SQL query not showing the desired results

I have created a function that gives me the client id but when i am using the function in the query its not giving me any result i.e. 0 rows but if I execute the function sepreatly and put the result of that function in the qurey it is giving me the desired result please have a look on the following and please reply with you expert opinion:
FUNCTION CODE:
create or replace function j2
(usid in varchar2)
return varchar2
is
cidn_in varchar2(4000) := '';
ls_sep varchar2(1) := ',';
cursor predicate_cidn
is
select
logical_schema_id
from
CLIENT_REGISTRY cr,
MEMBER_ROLE_CLIENT_ASSIGNMENT mrca,
MEMBER m
where
mrca.base_client_id = cr.base_client_id and
mrca.member_id = m.member_id and
cr.schema_in_use_in = '1' and
m.active_status_id = 'A' and
upper(mrca.member_id) = upper(usid);
BEGIN
for GET_CIDN in predicate_cidn
loop
cidn_in := cidn_in || ls_sep || '''' || GET_CIDN.logical_schema_id || '''';
end loop;
cidn_in := substr(cidn_in, 2);
cidn_in := '('||cidn_in||')';
--dbms_output.put_line(cidn_in);
return cidn_in;
END ;
SQL> select j2('qaa@adp') from dual;
J2('QAA@ADP')
('BASE18','SDK1TEST','SEETHA1CONFIG','BASE09','KAREN2','SIVACONFIG','BASE19','SD
K1CTEST','VASU1','KAREN5','EVENTS1CTEST','SDK1','ADA1CONFIG','BASE10','VRB1CONFI
G','CRU2CONFIG','BASE20','SIVATEST','PCOMCONFIG','KP1CONFIG','KAREN4CONFIG','EVE
NTS1TEST','SUZ3CONFIG','DONG2CONFIG','ED2CONFIG','SIVACTEST','APDCONFIG','EVENTS
1CONFIG','ESSCONFIG','SIVA','SDK2CONFIG','ED3CONFIG','RAJ4CONFIG','CBRCONFIG','N
AMRATA2CONFIG','EMIL1','NAMRATA1CONFIG','SDK2CTEST','BVT2CONFIG','MURUGAN1CONFIG
','COB1CONFIG','GABY1TEST','CHR1CONFIG','ED4CONFIG','USE1CONFIG','SDK2TEST','DEM
O1CONFIG','BERNIE1CONFIG','XA1','CAR2TEST','SDK2','ED5CONFIG','PAY1TEST','PAYXCO
NFIG','KP1TEST','SEAN1CONFIG','CAR2CTEST','VASU1CONFIG','SEAN2CONFIG','KP1CTEST'
,'MAU1CONFIG','CONWCONFIG','PAN1CONFIG','MERAJ2','PRA3CONFIG','SEAN5CONFIG','KP1
','PRA4CONFIG','CAR2CONFIG','PRA2CONFIG','SEAN6CONFIG','PRA3TEST','RPT','GABY1CT
EST','SDK3CONFIG','PRA2TEST','SEAN9CONFIG','CAR2','LV1CONFIG','PRA3CTEST','DONG1
CONFIG','TE1CONFIG','MERAJ2CONFIG','VIV1CONFIG','GABY1','SEAN2','PRA2CTEST','PRA
3','RPTCONFIG','PRA4CTEST','SEAN3','MITA1CONFIG','PRA2','RPTCTEST','PCOM1CONFIG'
,'SS2CONFIG','PAY1CONFIG','SEAN7','ANNCONFIG','BASE11','BASE02','LV2CONFIG','RPT
TEST','IMPECONFIG','SUR1CONFIG','SREEK2CONFIG','BASE03','SRINU3CONFIG','BDCONFIG
','JAY1CONFIG','AMMAN1','PRA1TEST','WPGCONFIG','BASE12','MP5CONFIG','MERAJ1','SR
INU2CONFIG','XA1CONFIG','RAJ1CONFIG','WPGCTEST','BASE04','CHRIS','RAJSCONFIG','P
ANKAJ','BASE13','WPGTEST','RAJ3CONFIG','WPG','BASE14','VASU2CONFIG','SRINU1CONFI
G','BASE05','PRA4TEST','VASU1TEST','PRA5CONFIG','NISH1CONFIG','CHRISCONFIG','SDK
3TEST','RAJ3TEST','KP2CONFIG','BASE06','DEFPCONFIG','NISH2CONFIG','CHRISCTEST','
WPSCONFIG','VASU2TEST','BASE15','GABY1CONFIG','PRA5TEST','MITA2CONFIG','BASE07',
'VASU1CTEST','KP2TEST','VASU2CTEST','LAURA3CONFIG','BASE16','CHRISTEST','WPSTEST
','VASU2','KP2CTEST','EVENTS1','BASE17','RAJ2CONFIG','WPSCTEST','BASE08','SREEK1
CONFIG','ADVE','PRA4','SDK1CONFIG','KP2','KAREN1','CRU1CONFIG','WPS')
Now if i put the results (cut and paste )in the query it gives me the results
SQL> select count(*) from baseclient.address_detail where cidn in ('BASE18','SDK1TEST','SEETHA1CONFIG','BASE09','KAREN2','SIVACONFIG','BASE19','SD
2 K1CTEST','VASU1','KAREN5','EVENTS1CTEST','SDK1','ADA1CONFIG','BASE10','VRB1CONFI
3 G','CRU2CONFIG','BASE20','SIVATEST','PCOMCONFIG','KP1CONFIG','KAREN4CONFIG','EVE
4 NTS1TEST','SUZ3CONFIG','DONG2CONFIG','ED2CONFIG','SIVACTEST','APDCONFIG','EVENTS
5 1CONFIG','ESSCONFIG','SIVA','SDK2CONFIG','ED3CONFIG','RAJ4CONFIG','CBRCONFIG','N
6 AMRATA2CONFIG','EMIL1','NAMRATA1CONFIG','SDK2CTEST','BVT2CONFIG','MURUGAN1CONFIG
7 ','COB1CONFIG','GABY1TEST','CHR1CONFIG','ED4CONFIG','USE1CONFIG','SDK2TEST','DEM
O1CONFIG','BERNIE1CONFIG','XA1','CAR2TEST','SDK2','ED5CONFIG','PAY1TEST','PAYXCO
8 9 NFIG','KP1TEST','SEAN1CONFIG','CAR2CTEST','VASU1CONFIG','SEAN2CONFIG','KP1CTEST'
10 ,'MAU1CONFIG','CONWCONFIG','PAN1CONFIG','MERAJ2','PRA3CONFIG','SEAN5CONFIG','KP1
11 ','PRA4CONFIG','CAR2CONFIG','PRA2CONFIG','SEAN6CONFIG','PRA3TEST','RPT','GABY1CT
12 EST','SDK3CONFIG','PRA2TEST','SEAN9CONFIG','CAR2','LV1CONFIG','PRA3CTEST','DONG1
13 CONFIG','TE1CONFIG','MERAJ2CONFIG','VIV1CONFIG','GABY1','SEAN2','PRA2CTEST','PRA
14 3','RPTCONFIG','PRA4CTEST','SEAN3','MITA1CONFIG','PRA2','RPTCTEST','PCOM1CONFIG'
15 ,'SS2CONFIG','PAY1CONFIG','SEAN7','ANNCONFIG','BASE11','BASE02','LV2CONFIG','RPT
16 TEST','IMPECONFIG','SUR1CONFIG','SREEK2CONFIG','BASE03','SRINU3CONFIG','BDCONFIG
17 ','JAY1CONFIG','AMMAN1','PRA1TEST','WPGCONFIG','BASE12','MP5CONFIG','MERAJ1','SR
18 INU2CONFIG','XA1CONFIG','RAJ1CONFIG','WPGCTEST','BASE04','CHRIS','RAJSCONFIG','P
19 ANKAJ','BASE13','WPGTEST','RAJ3CONFIG','WPG','BASE14','VASU2CONFIG','SRINU1CONFI
20 G','BASE05','PRA4TEST','VASU1TEST','PRA5CONFIG','NISH1CONFIG','CHRISCONFIG','SDK
21 3TEST','RAJ3TEST','KP2CONFIG','BASE06','DEFPCONFIG','NISH2CONFIG','CHRISCTEST','
22 WPSCONFIG','VASU2TEST','BASE15','GABY1CONFIG','PRA5TEST','MITA2CONFIG','BASE07',
23 'VASU1CTEST','KP2TEST','VASU2CTEST','LAURA3CONFIG','BASE16','CHRISTEST','WPSTEST
24 ','VASU2','KP2CTEST','EVENTS1','BASE17','RAJ2CONFIG','WPSCTEST','BASE08','SREEK1
25 CONFIG','ADVE','PRA4','SDK1CONFIG','KP2','KAREN1','CRU1CONFIG','WPS');
COUNT(*)
228
BUT if I user the function it gives me no results
0 rows selected and its taking a loon time to reurn

This appears to be a duplicate of the question in this thread
Re: VPD issue Need Assistance ASAP
where I wrote
"Your function returns a single string that happens to have a bunch of commas and quotes in it. An IN list generally requires a list of strings, which your function doesn't return.
You could rewrite the function to be a pipelined table function and then do
select count(*)
from baseclient.address_detail
where cidn in (SELECT cidn
FROM TABLE(<<your pipelined table function>>))
However, I would expect it to be easier not to wrap all this into a function and just have your IN clause be the logic in your predicate_cidn cursor.
Justin
"

TS1702 purchased app not showing up in app list

I recently purchased an app that shows up in my purchase history, but doesn't appear in the app store page with all other apps. How might I fix this?

If they were purchased using a different Apple ID than the one your phone is signed in to in Settings>iTunes & App Stores they won't appear until you sign into the other ID. They also won't appear if they are no longer available in the app store.

Notifications Panel Not Showing the Desired Number of Items

I have been doing some tweaks to the notification panel on my iPhone 6. For the Dropbox widget, I changed the Notification setting to display 1 most recent items instead of the 5 most recent items. However, whenever I swipe down the notification panel, I'm still seeing the 5 most recent items. I tried removing the widget and re-adding it and it's still showing the 5 most recent items. How do I "convince" it to do what my settings should be telling it to do?

Go to your Pictures Folder and find the iPhoto Library there. Right (or Control-) Click on the icon and select 'Show Package Contents'. A finder window will open with the Library exposed.
Look there for the iPod Photo Cache.
Trash it. Start iPhoto and try sync again.
Regards
TD

Downloaded apps not showing up in apps tab

I downloaded several apps using the itunes store, most were free, some I bought. After they all downloaded, only a few showed up in the Applications Tab on itunes. I found the ones that didn't show up on my computer and they downloaded as APP files in a different spot than the other files that do show up. I've already checked for available downloads and even re-downloaded some of the apps, but the same ones still won't show up. What do I do.

tried dragging but it won't let me. the apps that are showing up are in this file: _C:\Documents and Settings\Matt\My Documents\My Music\iTunes\Mobile Applications_. the apps that won't show up are in this file: _C:\Documents and Settings\Matt\My Documents\My Music\iTunes\Mobile Applications\Downloads_. then each application has it's own folder and inside that folder a file called download and a file called info. i can't open either file with my computer, it says i don't have the right program, even if i select itunes as the program to open them. it's like they downloaded the application but didn't open it up. the ones that worked have the itunes icon next to them and under type say Apple Device Application File. the ones that don't work have a smaller icon and say APP File.

TS1702 Garmin app not showing in purchased apps on Ipad2

I have Garmin N. America App since Sept. 2012. It has worked in my Iphone 5 and Ipad2. Recent updates have caused it to stop working. Cannot synch with itunes. Iphone 5 allows for it to be re-download from app store purchased ( as recommended from Garmin). Itunes shows it as purchased but it doesnt come up in Ipad2 as purchased and cannot synch with Itunes - Error message keeps coming up. Any Ideas on this. Thanks

Did you make sure that the same iTunes account (the one which you used for the initial purchase) is properly set across all your devices?

IPad's apps not showing in iTunes app management

Hey!
We have iPad Air and now a brand new Macbook Air. After getting everything back from old Macbook Pro to MB Air using Time Machine I started to tweak with iPad again.
It finds the iPad just fine, sync seems to work, but in Apps tab I can't see any of the apps installed on iPad in the left column. I can't now move files between the laptop and iPad's VLC Player because of this. All the softwares is now up to date, but before the old laptop broke, it used older osx and possibly iTunes as well than now. Maybe sudden update to these have caused some kind of glitch and prevents me from seeing the apps using Macbook..? Any ideas?

Well, I don't really use iTunes that much, so there weren't any content in the library to recover. I have just installed a few apps straight to iPad using appstore on it. I use iTunes just to move some movie files to VLC.
So, at the beginning, I had
- Older MBP running Mountain Lion and possibly older version of iTunes. Also had iPad with few apps including VLC, installed on it straight from AppStore. Could access VLC in File Sharing menu via iTunes.
Then the laptop got broken and now
- I got Macbook Air with latest osx and itunes. Files and settings recovered from Time Machine. Everything seems to be in place and iPad gets recognized by iTunes
- When plugging iPad in, I can see apps installed on it for a while during sync (if I select Apps tab in iTunes as soon as I plug it in). The icons are grey and after sync is complete, they disappear from the list completely and I'm left with correct screenshots of iPad on right side, but nothing in the list to actually access the apps.
Edit: and to answer the question, the apps are still on iPad and running just fine. The access just isn't working for some reason

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

How do I get the none button to pop up so u don't have to have a credit card for apps? I owe nothing for apps from Apple, NOTHING!? And it still does not show the option "none". If it helps the card I have is a debit.

I'm happy you figured it out and just try to keep in mind that not everyone you talk to at support will give the same advice or have the same knowledge. Just like those who contribute to these forums. Sometimes Google is your best friend.
I agree that Apple could probably make it easier, but as of yet prefer security over freedom. (sound famaliar?)
Anyway, if you choose to do so, you can leave feedback here:
Apple.com Feedback
Apple Support Feedback
Developer Feedback
Product Feedback
QuickTime Feedback
Search Feedback

' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

' delete an app. All apps wiggle incl. the one in questions. However the app I want to delete does not show the x button. I reseted, also restrictions are on with on for apps delete. Suggestions?

mardemar wrote:
... - the only one without an x delete button.
What is the name of this App and where did you get it...?

Searching for apps not showing the desired apps

Similar Messages

Maybe you are looking for