Searching for event names in imovie 11

I have iMovie 11. I have hundreds if not thousands of events, covering 14 years. I'd like to
1) Search for a particular event or
2) Search for all clips in a particular date range, regardless of which event they are in.
I am surprised that I can do this in Aperture and iPhoto, but can't do this in iMovie.

Anyone out there who can help me out?
I only want to know the experiences of other fellow developers.
Help(even if you are not sure) would be really appreciated!

Similar Messages

Searching for events in iPhoto

I have lots of events imported from my Mac. How can I search for them by name?

How can I search for them by name?
There is no search function for event names or album names, sorry. Flag or tag the the photos in the event you are currently working with, so that they will appear in the "Flagged" album or a custom "tagged" album, see: Flag, tag, hide photos

How to search for events that collide?

Anyone now a way to find (search for) events, in calenders, that collide?

Hi Lasse,
I hope you don't mind an Applescript solution to your problem. I'm assuming all your events are held in one calendar.
The script here will ask for the calendar name, check all future events in that calendar and highlight any that clash.
Try out the script by pasting the text below into a new Script Editor window (Applications>Applescript>Script Editor) and pressing "Run". If you want to keep it, save it as file format "application".
Hope this helps.
John M
-- Copy below here into Script Editor--
-- Find Calendar Overlaps --
-- John Maisey -- 9 Sept 2005 --
tell application "iCal"
     activate
     set myNow to my (current date)
     set sourceCal to first calendar whose title is (item 1 of (choose from list ¬
          (title of (every calendar) as list) with prompt "Choose the calendar"))
     set {myStarts, myEnds, myUIDs, mySumm} to {start date, end date, uid, summary} of (events of sourceCal whose start date is greater than myNow)
     repeat with myFirst from 1 to count of myStarts
          repeat with mySecond from 1 to count of myStarts
               if myFirst is not equal to mySecond then
                    if ((item myFirst of myStarts) is less than (item mySecond of myStarts)) and ((item myFirst of myEnds) is greater than (item mySecond of myStarts)) then
                         show (first event whose uid is (item mySecond of myUIDs)) of sourceCal
                         display alert (item mySecond of mySumm) message "This event happens during another event in this calendar. The other event is titled " & (item myFirst of mySumm) & "." as warning
                    end if
               end if
          end repeat
     end repeat
end tell

Sharepoint 2013 - Search for link names on a single page

Hi
I am messing around with SP13 and trying to get my search result web part to only search for link names and display all results.
I have created the search source to point at the sub site. If I search for part of a link name it will list all links in one long row as a single result.
Example: One single page contains all links. Each link points to a .aspx page. The search source is pointing at this page and it can display results but only as a single result containing all links as one line of text.
Say I have 1000+ links of which 50 has names such as Link1-Item1-Basket1, Link1-Item1-Basket2 up to Link1-Item1-Basket50.
When I search for Link1-Item1 I would like my search results to display 50 results as 50 individual links.
Is this possible?

Hi,
Yes, you can format the search results as you expected. But you have to create a custom display template to format your results such as extract the links from each results and display it as separate link.
Once display template created you have to map the display template to your search results web part.
Please refer to the following articles.
SharePoint 2013 Customize Display Template for Content By Search Web
Part (CSWP) Part-1
Introduction to SharePoint 2013 Display Templates
Display Template Overview
Please mark it answered, if your problem resolved.

Why does Maverick mail no longer search properly? I used to search for a name and it would find it in All mailboxes. Now it sometimes works, but mostly not. Any solutions?

Why does Maverick mail no longer search properly?
I used to search for a name and it would find it in One or All mailboxes. Now it sometimes works, but mostly not. Any solutions?

I would like to add that Comcast is my internet provider. Perhaps that is part of the issue although the Connection Doctor confirms the mail box is connecting to the internet. No other function processes when Connection Doctor program is used to find the source of the issue. I have read forum posts but am unable to find a way to get my Apple mail to be delivered to my computer. It worked fine up until I chose to transfer mail to the Cloud. My mail account is a .mac account.
Still hoping someone out there can help me.
thanks,
anne

Search for events in the past

Is there a way to search for events in the past? If not, is there another calendar application with this feature that would be able to sync with my iPod Touch? This feature is one that I must have. I apologize if I come off as whining but my Palm calendar/address book was able to do this.
Thx

Hi helenhopelouise,
Welcome to the Support Communities!
The search feature within the Calendar app should show all events, past and present. First, check to see if you are syncing All Events in your Calendar app. Tap on the Settings app on your Home Screen. Then choose Mail, Contacts Calendars. Scroll down to the Calendar section to see your options.
Next, try the "Spotlight Search" of all of the data on your iPhone to see if the calendar event you are looking for appears.
Finally, try quitting all of your open apps and restarting and/or resetting your iPhone.
iOS: Understanding Spotlight Search
http://support.apple.com/kb/ht3636
iOS: Force an app to close
http://support.apple.com/kb/ht5137
iOS: Turning off and on (restarting) and resetting
http://support.apple.com/kb/HT1430
Cheers,
- Judy

I am searching for the name of an effect / a plugin (Compositing / Glow / Realism)

I am searching for the name of an effect / a plugin. Its a kind of glow that makes compositing of layers more realistic. I have a darker front layer (a person) and the light of the background layer "shines" on the edges of the layer on top ...

How to Light Wrap

Iphoto doesn't seem to search in event names

I'm in the process of organizing everything in events. I've got a lot of events with the word soccer in the title. So i tried to search everything to do with soccer. It only listed a couple of pictures with the title soccer and none of the events. Did anyone else notice this or is it just me.
Thanks,
Peter

Peter
I've just run a test add very odd words to my Event names, and yes, iPhoto found them with no problems.
Perhaps you need to force Spotlight to re-index: Open the Spotlight Preference Pane and Add your Pictures Folder to the Privacy Pane. leave it there for a few moments - like 2 minutes - then remove it from there and allow Spotlight time to re-index.
Regards
TD

How do I search for a name in iCloud Calander

is there a search set-up on iCloud Calander? I want to search by event or name

Regular expressinos work just fine, especially when
searching for patterns. But they seem to be impying
it's a specific group of characters they're looking
for, and indexOf() is much faster than a regex.If he's reading from a file, the I/O time will likely swamp any performance hit that regex introduces. I think contains() (or indexOf() if he's not on 5.0 yet) is preferable to regex just because it's simpler. (And in the case of contains(), the name makes for a very clear, direct mapping between your intent and the code that realizes it.)

I just highlighted and changed the artist name of about a hundred songs in my library. This was an accident and I want to change them back. I can't "undo" or search for artists' names online. Any way to fix this? They are still highlighted.

These were all songs I had ripped from old CDs, lot of which, I no longer have. I can't remember that artists' names for all these songs. They are all "oldies" from the fifties and I just accidentally changed the artist for all them to Fats Domino. I'd had them all highlighted because I had done a batch change of their genre to Oldies. I couldn't tell that they were all still highlighted after that change because I could only see two of the songs at the time that I changed the artist name. Is there any possible way to undo this? All the tracks are still highlighted from the naming operation. I can't search for the artists' names online because I didn't purchase them from iTunes. Any suggestions would be greatly appreciated. Thanks!

I found one other way to do it. I just deleted them all out of my iTunes library. Now I can re-import them from Window's My Music file with the original artists' names intact.
Thanks for your help, Matt!

Transport error - Search for technical name

Hi Experts,
I have transported an order from T-System to Q-System without any errors. But from Q to P-System it shows me some errors.
The error protocol gives me some technical names which are not in the system. For example 4E15PO57C6T4LN8Y3EI6W0EA5.
Now I have no idea which object calls 4E15PO57C6T4LN8Y3EI6W0EA5. I can`t search for it or anything else.
How can I identify objects If I have just this id 4E15PO57C6T4LN8Y3EI6W0EA5?
Thank you very much for all answers.

Hi Marian,
If it is a transformation ID, dso etc you can search for the ID in the DEV system by selecting RSA1 and ctrl + F to find. Paste the ID in and search.
If it is a bex object (query, view, variable etc) then you can use table RSZELTDIR from se16 enter then name of the object in ELTUID. This will display the name of the object.
Thanks,
Nick.

Search for Function Name in multi seq files

HI,
How can you search for a Fucntion Name (calling a CVI dll) in multi seq files?
The normal search function is looking for step name only....
so, as an example
Step Name: Test No. 1
Specify Module (CVI type step):

Have you tried using the Find in Files feature of the sequence editor? What version of TestStand are you using? I think it's been in the sequence editor since at least 3.1.
If you have tried this feature, but are having trouble getting the results you want, please provide more details about what exactly you are trying to do and how it is not working.
Hope this helps,
-Doug

Authorization for event name

Hi Experts,
Could you please let me know if there is an authorization object for restricting based on Event name?
Like a User should be access only one Event in SM64 and SM62.
Once this issue came up, but it had been unsolved.
Authorization Object for Event
Thanks a lot,
Kanako Imamura

Hi Sai,
Check this link:
http://help.sap.com/saphelp_nw04/helpdata/en/80/1a6859e07211d2acb80000e829fbfe/frameset.htm
Bye
Dinesh

Search for column name in DB tables

Hi Guys
Is it possible to search column name when we do not know the corresponding table in the databse
Cheers
shabar

You can use the data dictionary to search though a list of all column names. The <strike>table</strike> data dictionary view is ALL_TAB_COLUMNS.
Lets assume you want to search for ID columns:
example
select owner, table_name, column_name
from all_tab_columns
where column_name = 'ID';Edited by: Sven W. on Jun 21, 2011 1:47 PM

Can't search for events in iCal

I always thought that I could search for an event in iCal by typing a text into the Search space and then would get a list of all events with that text; at least that's what I think did happen in the past.
If I do that now, no matter which text I type I do get a table with Date, Type, and Title below the calendarr, but with no events listed in it. ??? Did I inadvertently change some settings which prevent events to be listed?
Any advice would be highly appreciated.
Cheers,
Veit

Are you saying that the search in iCal (Leopard) will only work when Spotlight has indexed your computer and the iCal events box is checked? That means that iCal is not searching independently of Spotlight, but really it is using the "Spotlight" index/database?
Was this true in TIGER? - I just started my PBG4 which is TIGER and the seach is quick - includes everything if nothing requested. OK it has SpotLight, too-- if I UNtick Events & To Do items in TIGER will I then have no search ability in iCal??? (I guess I could try that and the re-tick it later??)
My MB with Leopard is actually updating right now, and says it has 5 hours left - since I added my HD to the list then removed it (to get it to generate a new index). So in 5 hours I can re-test to see if iCal can search (and find something!) --in Leopard.
Would be great to have a true LIST along with the DAY-WEEK-MONTH tabs in iCal-- we have that with my iPod Touch-- OK it's LIST - DAY - MONTH on the iPod - no "week" but I prefer that to what I have now on the iCal 3.0.6 (Leopard).
Comments welcome - and my little ALARM icon/notifier on the event itself is GONE in iCal Leopard- used to like that in 2.0.5 - could see which events had alarms and see if I'd forgotten to set one. How to get THAT back???
Best regards,
Steve Schulte
Wednesday 11 March 2009 at 14:17

Searching for event names in imovie 11

Similar Messages

Maybe you are looking for