Searching for firmware update for Lucent Tech (Silver to Gold)

I have a Lucent Tech. Silver PCMCIA card (PC24E-H-FC) that i picked up because it has the port for an external antenna so i can use it in the garage for storing and looking up manuals. I understand that it is possible through firmware update to switch it to a gold card for slightly higher WEP encryption level.
Does anyone know where to get that firmware update? I realize that it probably has to be done on a PC.
Everywhere i search leads me to the Proxim website where you have to open a service ticket to get to their downloads section.
Am using it with a Wallstreet II 300/192Mb.
Is the silver to gold possible or is it unatainable alchemy?
Any links would be appreciated, thank you.

Hi funky,
I found this page, which you might find useful:
http://www.uglybugger.org/source-enterasys2orinoco.php3
In the longest article on top, the links don't work, but if you scroll all the way down, there are some simple instructions. I have not followed them myself, so I cannot vouch for them, but I thought it could help

Similar Messages

HT1237 Searching for an EFI Firmware update to enable Lion Internet Recovery on MacBook Pro (15-inch, Mid 2010)

Hi All,
My Mid-2010 Apple MacBook Pro 15-inch started having random kernel panics lately (more than 1 month of random kernel panics now), usually associated with request such as "open new tab in Safari" etc.
Since I installed 2x4GB RAM modules from Crucial when I bought my MBP (they are +- 2 years old now) and also exchanged my DVD-drive for an extra SSD that now runs the system (fully updated 10.7.4) I have a feeling that those kernel panics might be HW related.
I wanted to run Apple Hardware Test but found out that it is no longer supported on Lion. Since I don't have any optical drive to install AHT from (also I don't have the CDs with me atm), I found out that I can install an EFI Firmware update that enables internet-based (?) AHT.
At http://support.apple.com/kb/HT4904# , the link from MacBook Pro (15-inch, Mid 2010) links to MacBook Pro EFI Firmware Update 2.6 which is for Early 2010 models only and doesn't allow me to run the installation process. I'm looking for an EFI update to enable Apple Hardware Test on my Mid-2010 Apple MacBook Pro 15-inch.
Is there an update that can do this? Is there a wrong hyperlink on Apple page or am I searching for a wrong update?
Also, even though this should probably be in a separate topic, can anyone please point me to the right direction for a good Apple Kernel Panic how-to-read-those topic?
Thank you very much in advance.

Hey Cris from London,
I would try out the recommended steps in the following link:
OS X Mavericks: If your Mac runs slowly
http://support.apple.com/kb/PH13895
Let us know if any of the steps within resolved the issue.
Welcome to Apple Support Communities!
Take care,
Delgadoh

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Hi, I have iPad 2, when I buy it it has old iOS. Then I update it now it has 5.1.1 iOS and modern firmware 4.12.01. After update my wifi is not working. Only searching for wifi. 3G working well. But wifi olso worked with old iOS. So what can do ? Pls

Look at iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
Additional things to try.
Try this first. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
Another thing to try - Go into your router security settings and change from WEP to WPA with AES.
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
If none of the above suggestions work, look at this link.
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

How to run a firmware update for buffalo tech NAS

I downloaded a firmware updater for a Mac to run the install of a firmware update to a Buffalo Tech NAS LinkStation. Mavericks tells me it can't run this because it is from an unidentifed developer. Nice.. I need a workaround if that is possible.

Here you go:
http://support.apple.com/kb/PH14369

I phone is keeping searching for network even if i take the Sim out and i did reset but no use also it cant make software update - and the modem firmware has no number also

i phone is keeping searching for network even if i take the Sim out and i did reset but no use also it cant make software update - and the modem firmware has no number also

Either your phone is broken, or it was jailbroken. You can try a DFU restore.

New Firmware Update for Nokia N95 (RM-159 ) :Decem...

Hello All,
It looks like new firmware update is available for Nokia N95 basic model .
Earlier Version of Firmware was : 30.0.015
Now the latest available Firmware was : 31.0.014
When i connected my N95 to PC using PC-Suite, it notified me about this. But when i searched the internet for change log , i found none. Is it right firmware , why Nokia didn't disclose change log, which it used to do it earlier ???
I will wait for 2 more days for official communication from Nokia....

Ok, so no one wants to install this firmware because theyre affraid they loose their freedom?
Somebody should shine a light on this FW, or nokia has
done a lot of work for nothing!

Officejet 6700 error while searching for updates: 'Printer could not connect to server'

I recently purchase the Officejet 6700 Premium. While setting the printer up, I received the error 'The printer could not connect to the server.' I first received this while the printer was searching for updates. I later received the same error while trying to set up ePrint from my computer.
The printer is connected through my wireless router. All other print services function normally. It is connected to the network, and I have printed several times over the wireless network.
Though I don't think it matters, since the on-board print set-up gave me the error, I run Windows 7 64-bit on my computer.
Thanks for any help!

What is the IP address of the printer? What is the make and model of the router that you use in the wireless set up? Is the router firmware up to date?
I would first try power cycling the router and the printer. Turn off/unplug the router and then power down the printer. Then plug the router back in and wait for it to be fully up and functioning before turning the printer back on. After you have both pieces of equipment back on and functioning attempt to connect to web services again.
If still having problems I would attempt to set a static DNS on the printer through the embedded web server (EWS) by entering the printer's IP address into the address bar of a browser on a computer.
Once that computer displays that page click on the Network tab.
Then look in the column to the left and find the Wireless section
Click on IPv4
Then on that page look at the 2nd section that is labeled DNS Address configuration
Change the radio button to the manual option
Then for the manual preferred fill it out and make sure it reads 8.8.8.8
Secondary should be set to 8.8.4.4
Then hit Apply
Read the next screen carefully. That message with the "OK" button below it is one that states to click that button to undo the changes you just made. Just navigate away from that page by clicking on another tab.
Then reattempt to connect to web services.
I am a former employee of HP...
How do I give Kudos?| How do I mark a post as Solved?

Firmware update for HP OfficeJet Pro 8000 wireless to fix load paper issue - as for the 8500?

Is there any hope that that soon will be a firmware update to fix the issues loading paper and the printheads for the HP OfficeJet Pro 8000 wireless printer?
A month or two ago there came a firmware update to the HP OfficeJet Pro 8500 wireless, which has some of the same issues,
and allegedly should have the much of the same load-mechanism as the 8000 printer.
It would be great, as we are on the fourth (4) replacement of this HP 8000 printer. For example, it would be great if we could use normal (80g) paper and not has to use (HP) 90g paper, as this prevents us from using the duplexer and only print on one side.

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

A suggestion for next 5800XM firmware update

I hear all the time people wants widgets on their homescreen. i'm not sure if this the waht i really miss there.
instead i will be much more happy if i could have the contact bar above (and more than 4 contacts, at least 6-7 which we could roll left/right), and under this bar should be the application bar (and again, more than 4, which we could roll).
under both should be the google search (which is great), and the tasks/notes, which is my most important feature on the phone.
and how it all should work?
i want to see a full desktop when i start my phone, and when i choose my contact the other tasks/apps dissappear from the screen (or being transparent).
i don't understand why i have to choose between contacts and apps, and most of the time they both don't take advantage 5800's hugh screen (by leaving large spaces unused).
but if we could see a Facebook widget or a normal weather widget on the next firmware update, it could be nice (but less necessary) ...
good luck!
Lior R.

that is a nice idea you have there, but one must think about how practical all these changes and additions will be. if one must have, lets say 6 contact icons next to each other in one row, the icons would have to be small in order for them to fit in nicely. i do notice that the way you have imagined the new home screen is much like the old S60 3rd edition, but do note that the 3rd edition was not touch screen. there are many people who wish different things for certain handsets, mine would be that the 5800XM should have a more windows vista feel to it, with option lists and screen appearing and dissapearing into the screen as though it was another layer on top of the previous page.
you must also remember that the S60 5th edition on the 5800XM is the a new version of the software, being added on the first Nokia touchscreen smart phone, so there are still many things Nokia has to learn from the 5800XM "test" phone.
hopefully our ideas will be seen in the new future.
Kind regards,
Memphis

Timescale for firmware updates Lumia 520 ?

Can anyone explain why there is such a varience in which the same update gets released either from a phone supplier or Nokia.
For example I am with O2 in the UK. I asked about the Amber upgrade and the replies varied from "what is that I've never heard of it" to " We are not imformed of release dates so do not know" to a straight "no idea". to " keep checking in settings-phone-update"
AT & T have been selling the Lumia 520 for some time and their version has Windows Phone 8 build 10327 (GDR2) and Nokia’s Amber firmware update already on board.
I can not see Amber for example being different in USA and UK or Swaziland for the same phone.
So why such a delay
A very impatient
Keith
Solved!
Go to Solution.

There is a difference between a sim,free (factory unlocked/unbranded) device and a carrier released version.
your challenge with updates when you have a carrier branded device is that the carrier usually has very few updates to devices. And, their firmware versions are different, which include bloatware.
it is either software they are paid to put in devices, or their own renditions of billing, WiFi calling, mapping, etc stuff. So, before they do any updates of firmware and push it out, they have to do their own version of QC whereas factory unlocked devices get updates when ever the phone manufacturer releases them, which is usually more often.
even,if you get your device unlocked, it will still require that the carrier push the update. So the care reps are usually going to very uninformed unless they truly are involved in the tech side and have genuine interest to learn more. From a corporate perspective, they usually are scripted and clueless, which for the companies sake helps them not to create anymore confusion with the customer base then already is there.
as for the varients of,different countries, good to think about the regulations each country has, as well as some of the functionality of the device. Some countries don't have 3 or 4g service, or MMS is different, or there are frequency differences or regulations on what can be done. This goes far more deeper than just having the language available.
hope that helps

I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with a updated graphics card ??

I am looking to upgrade my macbook pro 13". I have a new logic board and have searched for the spec on this i.e. hdd size and ram. will my 2009 screen work with an updated graphics card ??

Sounds just like what was happening with my Alum MB. I took it in and they replaced my battery. It seems to be ok now. I don't know what it is, but my battery was fine before 10.5.6 and the same timeframe of the firmware updates when they came out.
My battery health was jumping around but was fine before all of this happened. Unfortunately at 381 cycles I don't think you have much chance of getting the battery for free. Perhaps you can complain about the battery saying it was fine until 10.5.6 or whatever. Not sure when your computer was made, but perhaps you are eligible for this program: http://www.apple.com/support/macbook_macbookpro/batteryupdate/

Disk Image for Firmware Update Utility for LaserJet p2055dn is corrupted

Yep. Not sure what happened with that one. I have submitted the issue to the software team. Hopefully I can get a copy that works out to you soon. Apologies for the inconvenience.

Update to my previous post: HP confirms that their Firmware Update Utility is broken, but there is another way to update the firmware on a LaserJet P2055dn using a Mac running OS X, and here it is. HP tech support walked me through this procedure and it worked for me: Getting the printer ready: ensure that the LaserJet P2055dn is connected to your computer and make it the default printer. In System Preferences / Printers and Scanners, find your HP LaserJet P2055dn, select it, Click “Open Print Queue” and on the Printer menu, choose “Make Default.” On that same menu, choose “Print Test Page” and verify that the page prints.Using your Web browser, go to the following page on the HP website and click the “Download” button. Don’t worry that the page says it’s for Windows Vista. The file you’re about to download is for your HP LaserJet printer and doesn’t care what kind of computer you use to install it. Here’s the link:
http://h20564.www2.hp.com/hpsc/swd/public/detail?swItemId=ja-143142-1#tab1
When it finishes downloading, go to your downloads folder and find the file HP_LaserJet_P2055dn_20141201_build155964.rfu
(note: you'll probably get a “Preparing for HP separation” message;. Just click OK)In your Applications/Utilities folder, find Terminal, and open it. In the Terminal window, type lp (space) but don’t press “return” yet. Drag and drop the above file from your finder window into the Terminal window. Then press “return”Watch the LCD display on your printer. It should go through several steps, beginning with “erasing” and finally saying “ready.”Go back to the printer’s “Print Queue” window and print another test page. If the test page prints properly, congratulations. You've done it!

Samsung Printer Firmware update information for iOS8 AirPrint compatibility issue

It has been noticed that there is a compatibility issues on some of the Samsung network printers while printing from iOS8 devices using AirPrint.
In order to resolve this compatibility issue with iOS8, new firmware for printer has been released.
Issue Case:
Printing using AirPrint from iPhone or iPad running Apple iOS 8.0 or later.
- Devices running version prior to iOS 8.0 or Mac OS X have no issues.
Details about affected printers and their fixed firmware versions.
Printers
Version with issue fixed
Samsung CLX-3300 Series
3.00.02.13 or later
Samsung C460 Series
3.00.02.13 or later
Samsung C470 Series
3.00.02.14 or later
Samsung M2020 Series
3.00.01.11 or later
Samsung M2070 Series
3.00.01.20 or later
Samsung M262x 282x Series
3.00.01.25 or later
Samsung M267x 287x Series
3.00.01.27 or later
Samsung SCX-3400 Series
3.00.02.05 or later
Please update your printer with the latest firmware as mentioned in the table above.
To update the firmware kindly follow the procedure mentioned below.
Search for your printer model on the link below
http://www.samsung.com/us/support/supportMain.do
Download the firmware.
Run the downloaded file and follow the instruction provided on the installation screen.
PS. During firmware update do not power off or unplug power cord of your printer. Doing so may make your printer unusable.
Moreover if in case non-compliant toner is used, it may cause error after firmware is updated.
We apologize for any inconvenience caused. We will try our best to provide best service and customer experience.
Thank you,
Samsung AirPrint support

Doesn't work .

Is there any way to get firmware update for my DVD-RW Drive from Ultra 40?

Hi, I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
While I do enjoy working on my U40 workstation, its DVD-RAM drive is wll pretty bad.
It just fails to burn DVD/CD-R/RW media too often.
Yes, I got it serviced, but it's just the same.
So my final hope is to get the latest firmware, becuase latest firmware often solves such media compatability issues.
Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
I did contacted Matshita for this matter and they tell me to contact Sun. But I cannot even find email address for Sun Support or any. sigh...
Thanks.
Sang

Hello Sang,
I have Sun Ultra 40 Workstation which comes with Matshita DVD-RAM drive.
Mine has D100 firmware and I find other people who has the same drive on different system have D101, D200, D201 firmware.
So does anyone know how to contact Sun to get the latest firmware for my DVD-RAM drive?
I did contacted Matshita for this matter and they tell me to contact Sun.
I did review the Full Components List for the Ultra 40. The only DVD drives listed (Part No. 370-7970) are Panasonic UJ-485 and Teac DV-W28SLA-093. Both aren't capable of reading or writing DVD-RAM.
In some countries Panasonic uses Matshita as brand name.
I did a search on SunSolve with the keywords DVD firmware.
Sun supplies only firmware updates for two DVD readers: Toshiba DVD 1401 (fixes: unable to boot from Solaris 8 DVD) and Toshiba SD-C2732 (fixes: returns incorrect data).
I was unable to update the firmware of the SD-C2732 (Sun part) with the Sun patch. The drive was attached to an Ultra 10 (with an adapter). I ended attaching the drive to a PC and using a DOS boot floppy with the Toshiba flash program and the Sun firmware.
Regarding you problems with the drive: Have you tried another brand of media. The Ultra 40 is under warranty (GA date was February 14, 2006).
Use the contact information from your other thread.
If you search the net for firmware you can locate sites that offers region-code-free firmware for several drives. Usually they provide a flash program (requires creation of a DOS boot floppy). Using these programs/firmware voids your warranty. Maybe you can not revert the firmware upgrade.
These slimline drives have no jumpers, the installed firmware (of the drive) determines if the drive is master, slave, uses cable-select (CS) or reversed CS.
Michael

Firmware Update for WAG200G to fix Security Hole

Hello,
I use a Linksys WAG200G with firmware version 1.01.09, and recently became aware that this particular model has a publicly known exploitable backdoor (See: http://www.businessinsider.com/cisco-warns-about-security-hole-2014-1 for more info).
Has this security hole been fixed? If yes, where can I download an update for it?
Thanks for your time,
Sam

Thanks for the advice to contact HP tech support!
I have tried in multiple ways since November 2009 to contact HP, when I got the first (of 4) printers. The first 3 printers was subsequently replaced.
Finally in late June 2010 I got the message that there was coming an firmware update for Windows, but not for Mac's. The firmware should improve among other things the paper pick up (load paper issue) and the print-heads life.
I have applied the Windows firmware on the printer from a pc, but still seems to have load-paper issues, even using HP Bright White paper, when printing from Mac's. I have not tested the printing from a pc, but assumes that a firmware upgrade the printer, and are not specific to a certain OS.

Searching for firmware update for Lucent Tech (Silver to Gold)

Similar Messages

Maybe you are looking for