Searching for inspection lots with a specific result

Hi,
Is there a way to search for an inspection lot or point containing a specific result?
Like show me all the inspection lots where characteristic "color" is entered as "red"
thanks,

Hi Alper,
To get it for specific material, there is an STD report available.
Try QGP1.
Regards,
Shyamal
Edited by: Shyamal Joshi on Jan 2, 2009 7:00 PM
Or there is an other way also but for that thing you need to strictly follow the below steps, without fail.
- Go to any inspection lot (T Code QA13) where this MIC's result is recorded. Ideally UD should be completed for this lot.
- In the "Characteristic" screen click on the "Chars relevant for usage decision", so it will display you all the results.
- Now click on the appropriate MIC. e.g. click on the MIC "color".
- Now click on the Result History or "Cntrl+F9".
- A small selection window will pop-up.
- Here there will be two main selections are available, 1> with Inspection Char. and 2> with Master insp. char.
- We need to "Master insp. char." activated (GREEN)
- Now at lower part of this screen there are four sub selection tabs such as Material, Object, Inspection lot, & time are available.
- In all the tabs a check box "Selection Active" is available, deactivate it.
- As soon as you deactivate it, the selection criteria will change into Yellow colored triangle.
- Noe Execute this selection.
- It will give you the data as you are looking for.
Pls revert if there is any query.
Regards,
Shyamal

Similar Messages

  • Manual inspection lot with out specification

    Hi gurus,
                    can anybody  give me an example for Manual inspection lot with out specification?
    regards,
    sbabu

    Hi,
    Actually it is not useful in manual inspection lot because manual inspection lot used to check your quality of material at  any movement.
    Means for example your raw material is in store department but some time you suspect something about quality & you take decision to check quality of material that time it can be used.  So in this case result record is mandatary,
    Because your intention to create lot to checked material so not use ful without specification .
    Also not any posting happening through  this lot.just to check the material at any instance.
    For any further clarification revert me back.
    Some time client want to create lot but do not want to take results for that just they are interested in giving
    UD & stock posting in that case you can remove tick task list required .This requirement mostly demanded for certain Engg items they do not want go material directly to unrestricted. it will go through UD.
    But manual inspection lot I do not think it much useful.
    Regards
    SANIL

  • Want to do mass processing for inspection lots with status SPRQ

    Hello,
    My company using early lot creation for 04 inspection type. We have thousands of inspection lots with status "UD   ICCO SPRQ PRII PRSI STUP". Now due to SPRQ status, system is not closing process orders associated with thousands of inspection lots.
    Is there any transaction where I can do mass processing of inspection lots to change the status "SPCO" from "SPRQ"?
    Thanks
    Bhavesh

    Dear Bhavesh
    You may have to modify the standard program to do so. Modify this program RQEVAI30.
    This can help you
    Regards
    gajesh

  • Goup result recording for inspection lots

    Dear All,
    Is there an option of recording results simultaneously for a number of inspection lots????
    Please help out....
    Regards ,
    rishabh

    Dear!!
    Please Check QE51n with Plant as selection And unchecke With out usage decision below and execute ull get all the Inspection Lots
    with regards
    Pushpalas

  • Inspection lot with 01 origin for stock transfer (Intra company STO)?

    Hi Sap Gurus,
    As per standard SAP configuration for 101 movement type, 08 is the inspection type used for stock transfers (Intra company STO). But, there is a requirement from business to use 01 for Intra STO. Is it possible to get an inspection lot with 01 origin while GR to the delivery created for Intra STO ( Stock transfer B/n plants from same company code)?.
    Thanks in advance
    Venkat V

    Hi All,
    Thanks for your replies..
    Its STO Purchase order between two plants under same company code. System triggers movement type 101 with movement indicator B - Goods movement for Purchase order and Receipt indicator X - Stock transport order. Here system expects inspection lot origin 08 as per standard SAP configuration(OMJJ).
    I just wanted to check, is it possible to get inspection lot from 01 origin for this type of stock transfers. If anyone who worked on this area, please share your inputs. 
    Thanks in advance
    Venkat V

  • Inspection lot with stock tab for sale return from customer.

    Dear,
    In our organization there are two scenarios,
    1)     Make to order- Strategy group -20
    2)     Make to stock- Strategy group -10
    I have maintained 05 inspection types in QM view for sale return inspection from customer.
    1) In make to order scenario Inspection lot created with inspection stock tab which is OK.
    2) But in make stock scenario no inspection lot is generated.
        Remember I donu2019t want inspection lot without inspection stock tab as per insp. type-06
    So please suggest me, what can I do for getting inspection lot with stock tab for make to stock scenario.
    Regards
    Shabbir Kureshi

    Hi
    QCC0>Quality inspection>Inspection lot creation>Inspection for shipping>Assign Inspection Lot Origin to Delivery Type-->aganist delivery type Enter 05 inspection lot origine
    Also in OMJJ check whether QM in active for mnt type 651
    Regards
    Sujit

  • Inspection Lot with Zero stock posting qty

    Dear QM Consultants,
    We have come across following scenario,
    1.     Repetitive manufacturing
    2.     Material has inspection type 04 and Z04. Preferred inspection type is not ticked. Z04 inspection type has been assigned to inspection lot 04.
    3.     Production GR done by 131 movement
    4.     Inspection lot generated with reference to 131 movement type. Lot for inspection type 04 is created.
    5.     Inspection lot qty in QA32 it shows correctly as that of GR qty.
    6.     But when we click on UD, in stock posting tab, qty to be posted it shows as ZERO. So no qty is available for stock posting.
    Has anybody came across such scenario? Is this any bug? Any SAP note for this?
    Best Regards,
    Anand Rao

    Dear Sujit, Thanks for so prompt reply,
    Basically this is a complex case,
    1.     See we have set Posting Proposal in Usage Decision as u2018To unrestricted useu2019 in selected sets for usage decision. That means we need not every time go to stock posting tab. The moment we select ACC UD code it automatically posts the stock to unrestricted use.
    2.     Now, what has happed, by 131 movement declaration, backflush happened with 261 movement for child parts.
    3.     Inspection lots with inspection type 04 were created. (Here we did not note whether the stock was posted in quality inspection or in unrestricted use)
    4.     Now the requirement is to cancel 131 movement document. Kindly note UD were not given up to this moment.
    5.     Now through MFBF, user did document specific reversal. As a result of which and as per my knowledge 132 movement should happen and 262 should also happen. At the same time inspection lot status should be set to LTCA. But in actual case 132 movement happened and 262 did not. Surprisingly inspection lot did not set to LTCA status. It remained in REL mode only.
    6.     After this document specific reversal, user gave UD to these inspection lots without noticing where the stock was lying.(in unrestricted or in quality inspection). So the lot status set to UD   ICCO SPCO STUP after giving usage decision.
    7.     Now while doing reverse engineering that why 262 movement did not happen, we came to know that no 321 movement happened for the inspection lots which were generated with reference 131 movement document
    8.     Also, qty to be posted it shows ZERO as explained in my earlier post.
    9.     When we display 132 movement document through MIGO, in where tab it shows stock type as Quality inspection. That means stock was lifted from QI for 132 movement.
    In short  it cannot be predicted where the stock was actually posted whether in QI or in unrestricted use. But yes the post to inspection stock tick has been ticked in material master.
    Can you help further in this regard?
    Best Regards
    Anand Rao

  • Certificate creation for inspection lot

    Dear all,
       Is it possible to create test certificate for inspection lot of type 04. what is procedure to create this test certificate.
    Thanx & regards,
    Harish Parab.

    Hi Harish,
    You can generate an inspection certificate for the inspection lot generated for 04 insp type.
    U need to use QC21 Certficate for inspection lot transaction ( U can search the lot for ur production order)
    Basic steps to be done
    1. Create certificate profile
    2. Assign profile with out any recipient.
    3. Generate certificate
    Regards
    Venugopal

  • Creation of Recurring Inspection Lots with Serial numbers

    Hello,
    We have the following scenario at our client :
    <i>MIGO_GR</i> is used to create GR for materials with Serial number requirement. The serial numbers can be generated automatically or manually entered on the screen. At this point of time, the Shelf Life expiry date & Next Inspection date are calculated based upon the Production date. The Batch gets created with Next Inspection date, Inspection Lots are created and the Serial numbers are assigned by the system. The stock moves into QI.
    The stock is moved from Quality restricted to Unrestricted stock via <i>QA11</i>. The serial numbers are handled by the system or can be managed on screen.
    Transaction <i>QA07</i> (Deadline Monitoring of Batches) is used to create Recurring Inspection. QA07 gives error message IO304 that "<b>Only 0 serial numbers entered instead of 1</b>". The problem is that system doesn't pick up the corresponding serial numbers.
    OSS # <u>497845</u> mentions that Transaction QA07 can not handle serial number. The serial numbers are very critical to the business process.
    Has anyone come across this situation before ? Please suggest solution or workaround. I tried using BAdI "<b>INSPECTIONLOT_UPDATE</b>" & was able to create Inspection Lots with serial number assignment, also manipulated Batch to change the Next Inspection date. The problem is Material Movement (322) Document does NOT get created.
    Also tried implementing BAdI as per OSS # <u>608830</u> but doesn't give desired results.
    Any help is greatly appreciated.
    Best Regards,
    Homiar Kalwachwala.

    Hello all,
    Just wanted to bring this on top to be noticed.
    Would appreciate any help, suggestions...
    Regards,
    Homiar.

  • Bapi or FM to read data for inspection lot

    Hi Experts
    I need bapi or FM that will read all specifications and result value for entered inspection lot
    the data that we also got in transaction qa13
    I need exactly that data
    Thanks
    Taran

    hI,
    Check the below bapi's
    GetDetail : Load detail data for inspection lot [ BAPI_INSPLOT_GETDETAIL ]
    GetList : Select inspection lots [ BAPI_INSPLOT_GETLIST ]
    GetOperations : Select inspection operations for inspection lots [ BAPI_INSPLOT_GETOPERATIONS ]
    SetUsageDecision : Make automatic usage decision [ BAPI_INSPLOT_SETUSAGEDECISION ]
    StatInterface : QM-STI Interface [ BAPI_INSPLOT_STATINTERFACE ]
    Reward if helpful.
    Regards,
    nagaraj

  • BAPI for Inspection lots

    Hi,
    I'm executing the following steps in development:
    Goods Receipt
    (Transfer Order Creation)
    Transfer Posting
    (Transfer Order Creation)
    The goal is to receive the goods in an "external" Storage Location and then repost it in an "internal" Location. The TOs are automatically generated per Customizing of the Movement Types.
    I'm using the BAPI  BAPI_GOODSMVT_CREATE.
    In case of automatical Inspection Lots (Material master, view Quality management) the Express document lands in my Wokplace Inbox with the following error message:
    Error during creation of transfer orders for material document 5000002931
    Date: 10.03.2009
    Time: 13:13:42
    Transf.reqmnt CP1 8000000325
    TRs relevant for inspection lots cannot be processed using this func.mod.
    By pressing 'Ctrl + F6', you can directly trigger subsequent processing
    Is anyone aware of the BAPI, which will work with the inspection lots?
    Thanks,
    Taras

    Hi,
    you should be able to create inspection lots when executing                 
    BAPI_GOODSMVT_CREATE. See for example the attached note 536769 that         
    is about wrong status in the inspection lot created in this way.                                                                               
    Please review your data used for testing this BAPI. 
    Best Regards,
    Arminda Jack

  • Manual Inspection Lot for Inspection Lot Origin '04'

    Dear SAPians,
    We are presently getting Automatic Inspection lot with the Closing of Process order against Inspection Lot Origin '04'. Now there is a requirement came to generate Manual inspection lot against Inspection Lot Origin '04' but System is STOPPING US and giving an Error Msg. You Cannot Enter A Material  for the Specified Origin. I feel that there is some customizing issue. Please suggest.
    Thanks

    Yes Atul,
    The system is correcting you, remember the 04 type lot triggers in reference to the Order!!!!
    So don't enter the Material, just enter the Plant and inspection type i.e. 04 and press enter in QA01 trx.
    The system will ask you for the Order number.
    NOTE:- This will be manual lot (Other inspection), so will not have the stock posting tab at UD, though it will have number range of 04.............
    Regards,
    Shyamal

  • Search if a layersets with a specific name exist and execute a function if it is the case

    Hello,
    How can i write a script that search if a layersets with a specific name exist and execute a function if it is the case?
    Some examples?
    Many thanks.
    Regards.
    Sebastien

    This would check for a LayerSet if a name with DOM code – so it’s fairly slow.
    var check = checkForLayersetNamed(app.activeDocument, false, "thisName");
    alert (check);
    ////// function collect all layers //////
    function checkForLayersetNamed (theParent, theCheck, theName) {
    /* if (!allLayers) {var allLayers = new Array}
      else {};*/
      for (var m = theParent.layers.length - 1; m >= 0;m--) {
      var theLayer = theParent.layers[m];
    // apply the function to layersets;
      if (theLayer.typename == "ArtLayer") {
    // allLayers.push(theLayer)
      else {
      if (theLayer.name == theName) {theCheck = true};
      theCheck = (checkForLayersetNamed(theLayer, theCheck, theName))
    // allLayers.push(theLayer);
      return theCheck
    Below is AM code Paul Riggott posted some time ago in connection with linking Layer Masks.
    Re: Automatically re-link layer masks
    You could add a check for whether the Layer is a LayerSet, but if the name is the sole distinguishing feature this might work as a basis for your operations.
    app.bringToFront();
    main();
    function main(){
    if(!documents.length) return;
    linkLayers();
    function linkLayers(){
       var ref = new ActionReference();
       ref.putEnumerated( charIDToTypeID('Dcmn'), charIDToTypeID('Ordn'), charIDToTypeID('Trgt') );
       var count = executeActionGet(ref).getInteger(charIDToTypeID('NmbL')) +1;
       var Names=[];
    try{
        activeDocument.backgroundLayer;
    var i = 0; }catch(e){ var i = 1; };
       for(i;i<count;i++){
           if(i == 0) continue;
            ref = new ActionReference();
            ref.putIndex( charIDToTypeID( 'Lyr ' ), i );
            var desc = executeActionGet(ref);
            var layerName = desc.getString(charIDToTypeID( 'Nm  ' ));
            var Id = desc.getInteger(stringIDToTypeID( 'layerID' ));
            if(layerName.match(/^<\/Layer group/) ) continue;
    /* you could insert your operations in an if clause here */

  • Problem with searching for 'empty' emails with BAPI_BUPA_SEARCH

    Dear ABAP'ers.
    I have got a small problem with BAPI_BUPA_SEARCH.
    I Use this BAPI to search for Business Partners with the Email condition.
    I put rhe Email to lv_email variable, it works ok.
        lv_email = ' '
        CALL FUNCTION 'BAPI_BUPA_SEARCH'
          EXPORTING
            email = lv_email
          TABLES
            searchresult = lt_searchresult   <= returns no BuPas
            return       = ls_bapiret2  .
    But I need to have a possibility to search for such Business Partners who have got no email address. Unfortunatellu when I pass an empty lv_email to BAPI, it returns no Business Partners whilst such BuPas exist in database.
    Is there some possibility to search for those BuPas who have got no email address assigned?
    I will be thankful for help.
    Regards,
    P.

    Can you query ADR6 table where SMTP_ADDR = space.
    and pick the PERSNUMBER or ADDRNUMBER and pick the Patners related to that ..

  • Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results

    Error message: "Warning: unresponsive script". Afterward, the system freezes and will then crash. Crash reports have been submitted many, many times without response. I have tried the fore-mentioned solutions with either no results or very bad results which I filed a report but did not receive an answer. The application to block scripts actually worsened the problem and I could not correct the situation for a while (no response from Firefox, at all). I have also been through this procedure without any one contacting me, AT ALL.
    == URL of affected sites ==
    http://http://www.facebook.com (always) and www.YouTube.com (sometimes)

    There does appear to be any support whatsoever from mighty "non caring" FIREFOX & people are getting fed up. We may as well try another system, if they can't be bothered to provide any support for their system, we can't be bothered to use their system.
    Brianeng

Maybe you are looking for