Searching for location

I just received the Nokia 928 and set up all my favorites and everything is ready to go except..........Here maps and Nokia Drive+ Beta is always searching for my location which with that I cannot use navigation to get to where I need to go. Does anyone have any ideas on how I can correct this?
Solved!
Go to Solution.

As HERE Drive+ has graduated from Beta have you tried looking in Nokia Collection in Store?
Happy to have helped forum in a small way with a Support Ratio = 37.0

Similar Messages

  • When can we expect Siri to be able to search for locations in the UK?

    I was pretty surprised that Siri can't search for locations and businesses in Britain yet. I read online that it was expected in 2012, but since we're 4 months into the year already I'm wondering how long it will actually be, surely it cannot be that hard to do?

    Sometime between now and December 31st of this year unless what was expected to be available this year in this regard will be delayed.
    It must not be easy to do or it would have been done by now, or Apple has other priorities above this.

  • GPS stopped working! (unending "search for location" prompt since Android 5.0.1)

    Shortly after getting the Android update my GPS stopped working all together. I have tried everything i could think of. Uninstalled all recent apps, hard reboot, GPS testing app, full phone diagnostic apps, finally COMPLETE phone wipe re-installing everything. Nothing has worked! I am desperate. I use GPS all the time, not a single app, nor the phone itself can get the GPS to get a location fix. No matter what i do, the phone eternally says "Finding Location" for every single GPS using app, diagnostics or otherwise.
    It is just a stock Verizon HTC One M8. A brand spanking new one, never dropped, stock verizon/android OS, like literally pristine new! Since the phone is not rooted i have no real way of rolling back to an older Android version correct? I noticed there was only one other post with the same exact symptons posted about 3 months ago that went without any answer/responses since. So... am i SOL? I tried initiating Verizon support on Twitter, but they think its a specific app problem... *sigh*
    Any help is greatly appreciated!

    I have been trying to troubleshoot with Verizon support via twitter as well. So far I have gotten, to simply turn location off for 12 hours and afterwords see if it works again. This did not work. They said engineers are looking into it.  Additionally this was a replacement phone via the HTC advantage program so I assume it is refurbished. I did not use GPS until the 5,0,1 android update coincidentally so I do not know for sure it worked when I got it.
    The 2nd link shows the possibility of GPS breakage during the initial teardown of a return. Sadly the other issue is extreme battery drain. A 5 min phone call took 5% power and standby for 2 hours took 30%. No active background apps beyond stock, no auto sync, all devices but 4g data and WiFi turned off.
    I think the software is not to blame. Seems HTC sent me an incrediby faulty phone.

  • Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this?  FYI...under settings i

    Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this?  FYI...under settings i

    If you are missing using google maps - try the Nokia map app called "here"

  • Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

    Hi. I am using the iPhone 4S and when I'm searching for places using Google it does not automatically detect my location. How do I change this? FYI...under settings i have it set at "Use new precise locations from my device."

    If you are missing using google maps - try the Nokia map app called "here"

  • Why can't I be able to search for a location in the HTC app?

    So, it shows weather for my current locations just fine, but when I search for a specific location it won't find it! The only time it shows weather is when its your current location. And it finds a few areas, such as Anchorage, Alaska. But I would like to know if this is a bug because it should find the locations I search for. And, I do have other weather apps but I want to know why the HTC app isn't working. Thanks!

        Hi Lizneedshelp,
    Oh No! I'm extremely sorry to learn that you may be having issues with the HTC weather application on your device. I definitely understand how important it is to make sure this application is fully functional at all times. Do you mind sharing what the exact name of this application is? Are you referring to the imbedded weather application that cam on the device? Please share details, thanks!
    Matthew_VZW
    Please follow us on twitter @VZWSupport

  • I downloaded some pictures my daughter sent in a file. I named the file ".zip" and now I can't locate it in "My Pictures" How can I search for it?

    How do I search for a file I can't locate?

    { Ctrl + J } to open the Downloads window, then right-click that zip file and use '''Open Containing Folder'''.

  • Searching for a file and returning location?

    Hello,
    Using flex 4, and creating an AIR desktop app for windows only, can you have a function search for a known file name and return the location?
    I cannot find anything about this, only an example for mac.

    HI Bethany,
    This may work in Numbers for iOS:
    Table 1 is your data table, with an index column (K) added.
    Your appointments for one specific date are shown on Table 2.
    Table 1 contains one formula, entered in K2 and filled down the rest of that column.
    K2: =IFERROR(IF(MATCH(Table 2 :: $B$1,B2:J2,0),MAX($K$1:K1)+1,""),"")
    The formula creates a serial number for each row containing the search date entered in Tble 2::B1, and leaves other rows 'blank'.
    Table 2 contains one formula, entered in B2 and filled right:
    B2: =IF(COLUMN()-1>MAX(Table 1 :: $K),"",OFFSET(Table 1 :: $A$1,COLUMN()-1,0))
    You will need a column for each potential appointment. The table as shown has a maximum of four. Add columns for more.
    Regards,
    Barry

  • Change Search help for Location in Schedule creation screen(NWBC)

    Hi all,
    My requirement is to change the standard search help for Location field in Standard stop sequence of Schedule creation in NWBC.
    Presently, the search help for the location field is a webdynpro component WDR_F4_ELEMENTARY .Is there any possibility to replace with the custom search help.
    Can anybody please let me know how to replace the search help.
    Thanks&Regards,
    Sharmista.

    Hi
    I suppose you may create a component customizing for /SCMTMS/WDCC_SCH_C_LOC_ATS, and maintain your DDIC search help for location ID, this will replace the one assigned in structure:
    You may only maintain DDIC search help here, but if you have a custom developed search help, then you may need to go with another approach, in viewexit class (/SCMTMS/CL_UI_VIEWEXIT_SCH) adapt_fields (ADAPT_FIELDS), modify the attribute 'WD_VALUE_HELP' = custom search help.
    Hope it helps

  • Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3.

    Apple Mail Search and Spotlight do not work for locating email messages after upgrading to Lion 10.8.3 on my 27" iMac.
    When searching in Apple Mail, sometimes a get a few results (with many missing), and sometimes no results at all.
    I had absolutely no problems before with Snow Loepard.
    I have reindexed mail and my startup drive. I have followed discussions regarding this matter and tried everything - a waste of time.
    This is VERY serious for me - I have many thousands of messages that I archive and need to reference for work and clients, and now I cannot find them.

    I found out that I needed a $100 mini displayport to dual-link dvi adapter to make my $30" cinema display work with my macbook pro
    http://store.apple.com/us/product/MB571Z/A/mini-displayport-to-dual-link-dvi-ada pter?fnode=51
    When I found out that solved the problem, I took it back because that was too expensive for a stupid adapter, and it still didn't work perfectly.

  • HT5467 Why am I getting a false location? I don't live in North Vancouver yet it says that's where I am. It should locate Burnaby. If I search for Burnaby "nothing found" comes up! Why?

    Why am I getting a false location? I don't live in North Vancouver yet it says that's where I am. It should locate Burnaby. If I search for Burnaby "nothing found" comes up! Why?

    As as been announced in the News worldwide, "Maps" is structurally defective and Apple itself is recommending that Users use a different 3rd party map app until they can sort it out.
    Hope this helps

  • Why does the location bar only perform searches, even typing about:config just returns a google search for "about:config"

    My location bar will only perform web searches and no longer takes the browser directly to web address entered manually. for example typing "about:config" returns the results of a google search for "about:config", typing "http://www.gawker.com" does not take me to gawkers website but rather returns google search results for "http://www.gawker.com".

    ''You might want to disable or remove that Yahoo! activeX Plug-in Bridge that shows in your Installed Plugins. Firefox doesn't do ActiveX and a plugin like that might leave you open to being exploited.''
    First you need to figure out if an extension you have installed is causing that.
    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]
    Or, it could be caused by Malware.
    Install, update, and run these programs in this order. '''''(Not all programs detect the same Malware.)''''' They are all free for personal use, but some have limited functionality in the "free mode" - but those are features you really don't need to find and remove the problem that you have.<br />
    ''Note: If your Malware infection is bad enough and you are mis-directed to URL's other than what is posted, you may have to use a different PC to download these programs and use a USB stick to transfer them to the afflicted PC.''
    Malwarebytes' Anti-Malware - [http://www.malwarebytes.org/mbam.php] <br />
    SuperAntispyware - [http://www.superantispyware.com/] <br />
    AdAware - [http://www.lavasoftusa.com/software/adaware/] <br />
    Spybot Search & Destroy - [http://www.safer-networking.org/en/index.html]
    Or maybe your ISP is doing the redirect, but that is doubtful since you're getting two different redirect addresses (unless you are using two different ISP's).
    There are two extensions that can prevent redirects: <br />
    NoRedirect: <br />
    https://addons.mozilla.org/en-US/firefox/addon/11787/
    Redirect Remover: <br />
    https://addons.mozilla.org/en-US/firefox/addon/537/

  • 1) I pressed Menu\Bookmarks\ShowAllBookmarks to open bookmarks organizer. 2) I pressed Ctrl-F to search for some bookmark(s) (e.g. newspaper domain) and found some. NOW The qustion is "Which folder this/these bookmark(s) are actually located in"?

    Salut!
    The scenario is "Find bookmark existed before and recall which bookmarkfolder it is in"
    Please note the "folder" is for "bookmarks", NOT a file folder of HDD-filesystem
    1) I pressed Menu\Bookmarks\ShowAllBookmarks to open bookmarks organizer.
    2) I pressed Ctrl-F to search for some bookmark(s) (e.g. newspaper domain) and found some.
    NOW The qustion is "Which folder this/these bookmark(s) are actually located in"?

    Hey, guys. Thanks for responding. I really didn't know I was so clueless about this stuff.
    I really thought "urxvt" could be used as an alias or, what we called in Debian, an alternative, to the rxvt-unicode-256color command. I guess not? I'm still trying to set up "vi" to be Vim as well, and I'll read more of the Wiki to figure that stuff out with Arch.
    So in the tty interface I can start zsh again just fine. That's old news. I removed the TERM setting and placed the resource in my .Xresources that derhamster said. Thanks.
    I also replaced the line in my Openbox rc.xml and menu.xml for terminal opening commands (can I use $TERM for those?)
    Now when I start Xorg (with Openbox running) I tried both urxvt-unicode-256color and urxvt but none of them work with Openbox. No terminal emulator pops up and no errors show that I can see.
    Last edited by mrrhq (2012-11-13 18:34:29)

  • "Using the Filter HUD to Search for Referenced Files" (and "Locate Referenced Files")

    I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do.
    I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this.
    Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at?
    Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection in the left hand pane when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run either of these commands?
    Thanks for any help in my getting this working better for me.

    hotwheels 22 wrote:
    I am trying to follow the Help Documentation item "Using the Filter HUD to Search for Referenced Master" (not sure if there is a way to post a URL to this) and I am not seeing what it is telling me to do.  1
    I am going to Edit > Find and it is telling me to "Click the Filter HUD button beside the search field in the Browser". Is this referring to a browser in the Aperture UI or is this in the Filter HUD display? I am not finding this. 2
    Also, it saying that in the Filter HUD I should "choose File Status from the Add Filter pop-up menu, and select the 'File Status' checkbox." and I am not seeing this either. Does anyone know where this is at?  3
    Lastly, I see that there is a command called File > Locate Referenced Files and when I run this I get a "No Referenced Files in the /current/ selection. I have realized that I don't quite understand whether I am running this search for a specific Project and/or whether I have to make a specific selection {4}  in the left hand pane {5} when I run a FILTER HUD or whether this automatically defaults to search the whole database. Does it matter what I have selected in the current Browser View when I run {6} either of these commands? 7
    Thanks for any help in my getting this working better for me.
    1.  Just copy and paste the URL from the on-line User Manual.  Very helpful.  Are you on this page?
    2.  From the above-linked page:
    Show the Filter HUD by doing one of the following:
    Choose Edit > Find (or press Command-F).
    Click the Filter HUD button beside the search field in the Browser.
    The instructions specify ONE of the following.  Your question indicates to me that you are trying to do both.
    3.  The User Manual has used the wrong term here.  It should say "Choose 'File Status' from the 'Add RULE' pop-up menu."
    4.  The command -- like all commands? -- works on the currently selected Images.  On the same page in the User Manual it says:
    You can select a group of images in the Browser and Aperture can show a list of the referenced images within the selection, including information about where the masters are located. {Emphasis mine.}
    5.  The Aperture workspace is highly configurable.  I don't know what you mean by "the left-hand pane".  Of what?
    6.  Yes.  Of course it matters.  At some point in the 80's when the GUI became standard computers standardized on the "Noun→Verb" syntax:  Select object(s), select command(s).
    7.  Not sure what the second command to which your refer is.

  • I searched for "Download FireFox 5 - got the following results: Found 1023 results for download firefox 5 in English. Please save me from having to wade through 1023 results to locate this download!

    I searched for "Download FireFox 5 - got the following results: Found 1023 results for download firefox 5 in English. Please save me from having to wade through 1023 results to locate this download!

    Why do you want the 5.0 version and not the just released Firefox 6 version?
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    *http://releases.mozilla.org/pub/mozilla.org/firefox/releases/latest-5.0/

Maybe you are looking for