Searching for pictures by both date and keyword

When I have the calendar tab up and a date with pictures is highlighted, when I go to select a keyword the calendar goes away and then I am back to my library. How do I search for pictures by both date and keyword?
Thank You, Margaret

Margaret:
You can use a Smart Album to do the job. Just use the criteria:
Keyword is "xxxx" and Date is "dd/mm/yyyy"
Be sure to select All in the Match menu.
Or you can use the text find box at the bottom in this undocumented way:
1 - click on the library icon and in the text box type any character.
2 - select the library icon again and type Command-I
3 - in the Find window (the same as what you get for a Smart Album) set your criteria: Keyword is "xxx" and Date is "dd/mm/yyyy" and set "All" as the Match criteria.
4 - hit the search button and those pictures will show up in the thumbnail window.
5 - when complete clear the text box at the bottom of the window to get all of the photos back.
Either way you'll get those photos with the keyword and particular date.

Similar Messages

How can I search for files with more than one keyword?

I´ve created some keywords, and some files in my folder are tagged with two, three or more keywords.
Is there a way to search for files using more than one keyword on the search field?
Thanks!

Use the Find command (menu Edit) and in criteria at the right side is a plus sign to add another criteria and set it to your custom wishes.
make a choice in results and you should be OK

My iPhone will not send an iMessage. It sends everything as SMS. I have ensured that my Apple ID is signed in and that my phone number is enabled for use in both FaceTime and iMessage

My iPhone will not send an iMessage. It sends everything as SMS. I have ensured that my Apple ID is signed in and that my phone number is enabled for use in both FaceTime and iMessage

I had the same problem. I went in and added my email address to iMessage and deleted the text to my friends that have iPhones and sent another to test it and it worked. Only thing is now my non iPhone friends don't receive my pic text. I had to turn off iMessage for it to work. Apple needs to fix this ASAP!

I bought a new Iphone 4s, gave the older to my wife , made a new account for her, erased all data and now when i sync them they interfere with the other. Eg: if i delete an app ou buy one it appears on her phone, what shoul I do?

I bought a new Iphone 4s, gave the older to my wife , made a new account for her, erased all data and now when i sync them they interfere with the other. Eg: if i delete an app ou buy one it appears on her phone, what should I do?

Have a look here...
Automatic Downloads...
http://support.apple.com/kb/ht4539
Turn off Automatic Downloads. Settings > Store

Searching for pictures with 2 keywords

Hi guys, I was just wondering if there is way to search for files with two specific keywords.
Lets say that I want to find picture that contains both Nicol and Brandy keywords. Not just one or the other. Is there any way to that in Bridge CS5?
Thanks for your help. Charles

Yes, yes there is. You need to use the Find function (Ctrl F in Windows).
With the Find window you will see a + at the right edge of Criteria line. Click that and it will add lines.
Select the Match for "All criteria met".

Data source for application using both pooled and non pooled connections

Hi guys.
I am integrating Oracle's connection pooling into an existing application that had formerly used dbConnectionBroker. It looks like this task should be quite straightforward. However, for consistency, I would also like to replace other Connection logic within the application to use Oracle classes. This will involve using OracleDataSource to obtain a Connection object. ( without pooling ).
So in this case, the application will use both pooled and non pooled Oracle connections. They will be connecting to the same database. The question I have is in regard to the use of data-sources.xml.
Are there any special considerations for the required attribute values within data-sources.xml under this scenario ?
Help will be greatly appreciated.
Regards.
Steve.

Hi Steve -
It should be feasible for you to define a single datasource using multiple location entries to indicate what sort of pooling behaviour you wish to use.
If you lookup and use the "location" attribute, you will receive a javax.sql.DataSource object which will not provide connection pooling.
If you lookup and use the "ejb-location" attribute you will receive a DataSource object that will support connection pooling operations.
Note that this is using the emulated datasource approach, and transaction support is limited to a single resource (one database) for these datasources - you won't get 2PC support for transactions.
If you need a transaction to span two separate resources (ie two databases in same tx) then you will need to use the non-emulated datasource approach.
There is a chapter in the J2EE Services Guide which describes the datasource model we have with OC4J. This might provide you with some more useful information. See Chapter 11 - http://otn.oracle.com/docs/products/ias/doc_library/903doc_otn/generic.903/a97690/ds3.htm#1004903
cheers
-steve-

Search Bill for Phone Number. Date and Times?

Hello-
I am having a problem doing a search over the past 12 months for an individual number.
Is there a quick and easy way to display the dates and times that I've placed a call to one specific number over the past 12 months?
Thank you!

YPP wrote:
I was hoping for a way to search online and get a line by line display of dates for the calls made.
If I have to download each pdf into a spreadsheet, combine them and do a search it will take a considerable amount of time.
To reinforce Spiral's suggestion, if you go to the Usage Details tab you can download your data in csv format. Granted, downloading 12 files and stitching them together isn't as convenient as an online search. However, it's much easier to do this with csv downloads than it would be if you had to do the pdf-to-spreadsheet conversion yourself. And once you've pieced things together, the data are a lot of fun to play with.

Searching for a Project status = CLSD and open purchase orders?

Hi,
I am searching for a project status (Project Builder CJ20N) which allowed my to set a CLSD or a simillar status for settlement with open purchase orders.
This staus should allowed to process with open orders BUT not allowed to add new orders after setting this status.
Have somebody any idee? Or it is impossible?
Tahnk you in advanced for your Help.
Regards Baldy

Hi TV-kid,
while I was waiting for an answer I got to the same conclusion, so what you offers me is quite tempting actually.
I got a look to your website and it seems convincing. Still though, your case studies are in other business area, It's only a mater of good knowledge of File Maker.
I did download the test-drive last version of File Maker plus their samll Business Solution. I did read most of the documentation and the learning process would be too long to construct ourself a good crossed-data base.
I'd like to get in contact with you to look for a possible colaboration. to get private, I'd liketo do it through your contact link in your website .
To whom shall I write?
Thanks
Cheers
Cheers

Best Practice for Installation of Both Leopard and Aperture 2 upgrade.

I've finally bought the bullet and purchased both Leopard and Aperture 2.0 upgrade. I've tried searching for a best practice to install both, but haven't been able to find one--only trouble shooting type stuff. Any suggestions, things to avoid, etc would be greatly appreciated. Even a gentle shove to a prior thread would be helpful. . . .
Thanks for pointing me in the right direction.
Steve

steve hutchcraft wrote:
I've tried searching for a best practice to install...
• First be really sure that all your apps work well with 10.5.3 before you leave 10.4.11, which is extraordinarily stable.
• Immediately prior to and immediately after every installation of any kind (OS, apps, drivers, etc.) got to Utilities/Disk Utility/First Aid, and Repair Permissions. Repairing Permissions is not a problem fixer per se, but anecdotally many folks with heavy graphics installations (including me) who follow that protocol seem to maintain better operating environments under the challenge of heavy graphics than folks who do not diligently do so.
• When you upgrade the OS do a "clean install."
• RAM is relatively inexpensive and 2 GB RAM is limiting. I recommend adding 4x2 GB RAM. One good source is OWC: http://www.owcomputing.com/.
• After you do your installations check for updates to the OS and/or Aperture, and perform any upgrades. Remember to Repair Permissions immediately prior to and immediately after the upgrade installations.
• If you are looking for further Aperture performance improvement, consider the Radeon HD 3870. Reviews at http://www.barefeats.com/harper16.html and at http://www.barefeats.com/harper17.html.
Good luck!
-Allen Wicks

Search on basis of start date and end date

Hi,
I have added two fields 'Start Date' and 'End Date' on a search page.
I have done the VO extension also.
Now, I have to implement search logic to get all the records created in between 'Start Date' and 'End Date' after pressing the 'GO' button on that page.
Can anyone please provide guidance to extend the controller.
Thanks in advance.
Gaurav.

Hi Anil,
Thanks for ur reply.
As per the link, I have written following code in the controller :
package oracle.apps.irc.vacancy.webui;
import oracle.apps.fnd.framework.OAApplicationModule;
import oracle.apps.fnd.framework.OAViewObject;
import oracle.apps.fnd.framework.webui.OAPageContext;
import oracle.apps.fnd.framework.webui.beans.OAWebBean;
import oracle.apps.fnd.framework.webui.beans.table.OAAdvancedTableBean;
public class xxVacancyCriteriaCO extends VacancyCriteriaCO
public xxVacancyCriteriaCO() {}
public void processFormRequest(OAPageContext pageContext, OAWebBean webBean)
super.processFormRequest(pageContext, webBean);
// Pressing the Go button causes the search to be executed.
OAApplicationModule am = (OAApplicationModule)pageContext.getApplicationModule(webBean);
OAViewObject oaviewobject = (OAViewObject)am.findViewObject("XXIrcVacancySearchCriteriaVO");
if (pageContext.getParameter("Go") != null)
String created = pageContext.getParameter("ViewDate");
oaviewobject.setWhereClauseParam(0, created);
oaviewobject.executeQuery();
OAAdvancedTableBean table = (OAAdvancedTableBean)webBean.findChildRecursive("ResultsTable");
table.queryData(pageContext, false);
But while compiling it, I am getting the error as :
"Error(14,42): PerTransactionTopCOImpl not found in class oracle.apps.irc.common.webui.IrcOAControllerImpl in class oracle.apps.irc.vacancy.webui.VacancyCriteriaCO in class oracle.apps.irc.vacancy.webui.xxVacancyCriteriaCO"
Can u please suggest where the mistake is?
Thanks again.
Gaurav.
Edited by: Gaurav on Jan 14, 2011 12:51 AM

How to search for pictures from the net

and display them in jsp?
I would like to write a jsp file that searches pictures on the net and displays them in the browser.
what is the code for searching the net?
should i download the pictures or can i link to them?
thank you

and display them in jsp?
I would like to write a jsp file that searches
pictures on the net and displays them in the
browser.
what is the code for searching the net? I thought you wanted to write a JSP for that? Now you want the code given to you?
Google makes an API to use their search engine. Look it up.
>
should i download the pictures or can i link to
them?
thank you

MRP run - misalignment for planned order between Date and Production Date

Hi All,
We've just integrated SAP for a new plant.
The MRP runs based on Routing Lead Time for Make materials instead on Material Master Lead Time, for Capacity Assessment purpose.
When requirements dates lay in the past, MRP performs forward scheduling starting from current date and properly defines Production End Date according to Routing.
By checking MD04, for the proposed Planned Order, the basic date is same as Current Date (= same as Requirement Date) instead of being same as Production Date.
It works as it if checks stil the MAterial MAster LEad time instead of Routing. In fact if I updated the LT of MM the MD04 provides the right Date.
For future requirements, the MRP works properly, by having basic dates (both start and end date) aligned with Production Dates of Planned Order.
How can I do the alignment w/o updating In House Production LT?
Thanks,
D

Hi Caetano,
we have already done this configuration in OPU5 but it doesn't provide any benefit.
Below how we configured it:
Scheduling level: Via detailed scheduling
Adjust dates: adjust basic dates, adjust dep. reqmts to operation date
For capacity scheduling: Always basic dates, dep. reqmts to operation dates
Scheduling type: Backwards.
Regards,
D.

Searching for clip in Premiere using the keywords assigned while ingesting same slip in Prelude...

Created keywords while ingesting a clip in Prelude , but I can't search for those keywords in premiere and bridge CC... Help!!!

Gonna need more info.

Search for files by ACCESSED dates?

Hi,
I work in an art department that has a server full of advertisements, thousands of files, which are Illustrator and Photoshop files, TIFF and EPS files, and Freehand files. There hasn't been a good archive system in place here for years, so there's many needless files on the server that need to be archived.
What I'm looking for is a way to search the ads folder on our server for files that haven't been accessed since a specified date (like two years). I don't mean last modified or created date, but accessed, because an ad in Illustrator may have a linked TIFF in it that was created or modified 5 years ago, but is still in use and accessed by Illustrator for ads currently running. I want to be able to archive the items that haven't been touched in a couple years without accidentally breaking links or having to do it manually through thousands of files.
Is there no way in the Finder to do this?

I don't have that many old files to play with it, but you can use the Finder's "Find…" to do a raw query of Spotlight's metadata. In the search terms, add a *Raw Query* type with something like *kMDItemLastUsedDate < $time.this_year(-2)* - this example will search for items with a last used date less than year 2005. The time and query syntax is explained a bit in [this developer document|http://developer.apple.com/documentation/Carbon/Conceptual/SpotlightQu ery/Concepts/QueryFormat.html#//apple_ref/doc/uid/TP40001849-CJBEJBHH].

How do i import new pictures to both iPhoto and another folder

so i've created a duplicate folder of my current iPhoto Library Originals - and renamed the new folder as Photos which was on my Desktop (I now moved it into the Picture Folder where iPhoto Library is also)
I'm still tinkering with both Bridge and iPhoto to see which I like better for organizing and using along side Photoshop Elements.
So, when I import new pictures this weekend, how can I import them into iPhoto Library as well as into Photos folder? I understand that while I choose to mess with Bridge, I need a completely separate folder of pictures from the iPhoto Library as not to corrupt it.
Thanks!

Use Image Capture (in your Applications Folder) to move the files from your camera to this Photo folder. Then import them to iPhoto from there. You can automate this process using a shareware called Hazel.
Regards
TD

Searching for pictures by both date and keyword

Similar Messages

Maybe you are looking for