Searching for Primes under One Million - A doubt in the JavaFX samples

http://javafx.com/samples/PrimeFactors/index.html
In this example, i found the number of primes calculated in JavaFX Script + Java w/ Threads section is different ( 1 count lesser) than the other ones. Is there any change in the logic for this part of the code? If my understanding is wrong, pls correct me.
Thanks.

Thamizharasu wrote:
Hi All,
Again i tried the same with javascript,..

Similar Messages

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. Any suggestions?

I have 3 older ext. hard drives that I've utilized many times. Today while searching for old files, one of the three is no longer recognized by my PowerMac. The drive is not listed in Disk Utility. Any suggestions?

Is the computer in you equipment line:
Dual Core Intel Xenon
(which is not a PowerMac but a Mac Pro) the one you are asking about, or do you have an older PowerMac?
If a Mac Pro, their forums are here:
Mac Pro
and, as Mac Pros have a totally different architecture from the pre-2005 Macs this forum covers, you may not have the same issues that can affect the older models. If someone didn't notice your equipment line, you could get advice that doesn't apply.
If you really have a pre-2005 PowerMac, read on.
If the stubborn external is USB and does not have its own power brick (i.e., it gets power only from the computer's UBS ports--"bus powered"), it may not be getting enough power. As electric motors age, they can demand more power than when new, and the power available on any USB port is limited.
The typical workabouts to making a computer recognize an aging, bus-powered USB drive are:
Get a powered USB hub (has its own power brick
Get a "Y" USB cable: 1 Meter USB 2.0 A to 5 Pin Mini B Cable - Auxiliary USB "Y" Power Design for external hard drives.
The second gets power from two USB ports on the computer and often that's enough.
Remember that the USB ports on your keyboard seldom provide enough power even for a thumb drive, so be sure to use the USB ports on the back of the computer.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.

I have a 15' Macbook Pro, mid 2010 running Mavericks. I want to upgrade the hardware by increasing the RAM to 8GB and replacing the HD for a SDD one. What would be the best way to install mavericks on the new HD? I have the original OS X CD.
From what I read, I have 2 choices: 1. to install OSX and then upgrade to Mavericks, but I'm not sure if this would be possible (to upgrade directly from OSX to Mavericks); and 2. to use a software called Super Duper.
I wouldn't like to have to use a third party software to do this, so the question is: is there a better way to install directly the Mavericks not having to use a third party software?

Install the new drive in the computer.
Install the old drive in an external USB or Firewire enclosure.
Boot the computer from the Recovery HD on the external drive.
Use Disk Utility to partition and format the new internal drive.
Clone your external drive to the internal drive.
How to replace or upgrade a drive in a laptop
Step One: Repair the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Step Two: Remove the old drive and install the new drive. Place the old drive in an external USB enclosure. You can buy one at OWC who is also a good vendor for drives.
Step Three: Boot from the Recovery HD on the external drive. Restart the computer and after the chime press and hold down the OPTION key until the boot manager appears. Select the icon for the Recovery HD then click on the downward pointing arrow button.
Step Four: New Hard Drive Preparation
1. Open Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your new hard drive (this is the entry with the
      mfgr.'s ID and size) from the left side list. Note the SMART status of
      the drive in DU's status area. If it does not say "Verified" then the drive
      is failing or has failed and will need replacing. Otherwise, click on the
      Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from
      the drop down menu to one. Set the format type to Mac OS Extended
      (Journaled.) Click on the Options button, set the partition scheme to
      GUID then click on the OK button. Click on the Partition button and
      wait until the process has completed.
4. Select the volume you just created (this is the sub-entry under the
      drive entry) from the left side list. Click on the Erase tab in the DU main
      window.
5. Set the format type to Mac OS Extended (Journaled.) Click on the
      Options button, check the button for Zero Data and click on OK to
      return to the Erase window.
6. Click on the Erase button. The format process can take up to several
      hours depending upon the drive size.
Step Five: Clone the old drive to the new drive
1. Using Disk Utility still opened.
2. Select the destination volume from the left side list.
3. Click on the Restore tab in the DU main window.
4. Check the box labeled Erase destination.
5. Select the destination volume from the left side list and drag it to the
      Destination entry field.
6. Select the source volume from the left side list and drag it to the
      Source entry field.
7. Double-check you got it right, then click on the Restore button.
Destination means the new internal drive. Source means the old external drive.
Step Six: Open the Startup Disk preferences and select the new internal volume. Click on the Restart button. You should boot from the new drive. Eject the external drive and disconnect it from the computer.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc. This is a new problem and was not the case before.

Windows 8.1 PC, using reader, when searching a folder containing approx 100 doc's. If i search for a word, no results are returned. only the doc names can be found but nothing from within the doc.
This is a new problem and was not the case before.

Works perfectly fine for me with the latest Reader version (11.0.09).
You write that it worked "before"; before what? An update? Update from what version to what version?

I purchased lightroom and photoshop a week ago and installed it successfully on my new iMac. the open box iMac ended up being a lemon so i had to exchange it for a new one. best buy wiped the old computer clean. now id like to reinstall the lightroom a

I purchased lightroom and photoshop a week ago and installed it successfully on my new iMac. the open box iMac ended up being a lemon so i had to exchange it for a new one. best buy wiped the old computer clean. now id like to reinstall the lightroom and photoshop to my new computer but i don't know how. help!

Download and install the trial version from http://www.adobe.com/downloads.html and activate it with your serial number or Adobe ID.

I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone is hacked my iCloud account?

I could not remember my apple ID password so I made a request for a new one. When I received the email with the link on resetting my password it was addressed to John Ohare. My name is not John Ohare. Does this mean someone has hacked my iCloud account?

Hello Corinne Craven,
Thank you for using Apple Support Communities!
You can update the name on your Apple ID here:
Appleid.apple.com
If you suspect unauthorized access to your apple ID I would normally recommend resetting your password, but you have already done this.
Here is some information about 2 step verification which is another level of security for your account.
Apple ID: Frequently asked questions about two-step verification for Apple ID
http://support.apple.com/kb/HT5570
Be sure to read all the information in the article if you choose to use two-step verification.
Take care,
Sterling

Search for more words one time

Goodmorning, as long someone could help me with the other issue http://forums.adobe.com/thread/1057325?tstart=0 I have another question for you.
I need to search for a specific list of words but I want to search only one time... So for example if I'm searching 3 different words HELLO - GOODBYE - CIAO I want that acrobat perform the searches in the same time and let me see how many times the words are repeated.
I try with the advanced search but I can only search one word at time... I see there is a command under tools>protection>find and remove text (hope I have translate right from Italian software) to search for different words in the same time but the problem is that it can't report how many times thw words are repeated. As you see I need a mix of the two tools
Do you have some suggestions?
Hope to read you soon. Thanks,
Luca
PS: I know I can do that with the boolean expression but in this way acrobat doesn't separate the rusults.

It will work with any of the smart album criteria - file menu ==> new smart album
The easiest way to see is to take a look at what is available there - and make a smart album or two - if you don't like them just drag them to the iPhoto trash and do another one
LN

Is there a way to Search (List search) for more then one field text from a column for Bulk uploading?

I've been trying to find more information on this and I apologies if this has already been answered. I just don't know the correct way to ask this. We have a SharePoint List at the company that we have people input information into different columns. The
problem is most of those information are very repetitive. Is there a way for me to search more then one field text in the column and just input that same information in?
ex:
Column 1
Column 2
Date:
883851
MidWest
User input
8831518
MidWest
User input
On the search field in the SharePoint List, I would need to search for 883851, 8831518 etc, would view those requested numbers, then I would click edit and change dates to those rows. Does that make sense? I'm sorry I'm fairly new at sharepoint.

I think what you're asking is about having repetitive options in a list, show up easily for new items being created.
This can be done by setting the columns that contain repetitive information to Choice fields. In the configuration of the Choice field, check the box for "Allow custom values". Now as users are entering data into the list, the dropdown of options
for a given field grows and users can quickly see and select previously entered and thus repetitive values for the given fields.
I trust that answers your question...
Thanks
C
|
RSS |
http://crayveon.com/blog |
SharePoint Scripts | Twitter |
Google+ | LinkedIn |
Facebook | Quix Utilities for SharePoint

Can you search for more than one person in a photo

Let's say you named all the faces in iphoto and now you want to search for a photo that contains two particular people, for example I want iphoto to find all the pictures that have Bob and Mary in that shot.
Is there a way to do this. I tried and it finds Bobs and Mary's pictures but not the ones where they are together? Maybe there is a way by writing Bob + Mary and then iphoto will find all those pictures?
Thanks

It will work with any of the smart album criteria - file menu ==> new smart album
The easiest way to see is to take a look at what is available there - and make a smart album or two - if you don't like them just drag them to the iPhoto trash and do another one
LN

Searching for more than one Label colour

E.g. I want to search for files with either a RED or ORANGE label, but I cannot seem to do that. I can have 2 search lines, but they are AND which means I only get files with BOTH labels set which is impossible so I get nothing.
If I just use a single criteria line and CMD click more than one label, it also seems to do an AND of the 2 criteria. Isn't there any way to do an OR search with labels?
Anyone know?

In Finder search, when clicking the plus sign to add search parameters, hold down the Option key. The plus sign becomes ellipses, which will produce an "Any of the following are true"➚ conditional. This generates the Boolean "OR" filter that you are looking for.

GREP - search for anything except one character

Trying to figure out if I can say this in GREP or not....
I want to search for any character that's in a Superscript character style except for registration-mark symbols. Is there a way to exclude one character from a search?
Thanks, Phyllis

Absolutely. Remember the '^' character that indicates 'start of paragraph'? Well ... apparently whoever devised GREP ran out of useful characters, because it's used again in the "exclude" group. It works like this:
[0-9fuzzy]
looks for a single character out of the set '0' to '9' (inclusive), 'f', 'u', 'z', or 'y'. Throwing in the hat reverses the query:
[^0-9fuzzy]
looks for any old single character except those in the set.
The Registered mark has a shortcut of its own in the regular Find -- ^r -- so presumably it's "~r" in GREP mode. If not, copy-and-paste one from your text. So your GREP search should be (with Superscript formatting)
[^~r]
This marks only the next non-registered character; to find longer strings you can safely use
[^~r]+
-- which translates into "any string in superscript, one character or longer, and not containing the Registered mark". Yes, the short version is a bit easier to type.

Searching for KB's directly with a URL containing the TID.

I have an application that gives me the TID of a support bulletin. I'd like a way to get a link directly to the bulletin on Novell's site.
For instance I see a Bulletin for apache2 for SLES 11 SP1 and it covers:
CVE-2011-3192,CVE-2011-3348,CVE-2011-3368
I'd like a way to search automatically by TID in a URL. My provider does not always provide the support ID for the bulletin, but the TID is always there.
I do notice if I goto:
NOVELL: Support
and search for the TID I get hits for the bulletin I'm looking for. Is there a way for me to use the URL itself with my search criteria in it?
So I could add something like:
274b1ea87316767c995b46d30d848997
To the URL in some particular string format?
Other search criteria may help as well if you cannot with the TID. I typically have a CVE, or bugzilla number too. The TID seems to be the most consistent though.
Thanks in advance for your time.
K

Something like this: http://www.novell.com/support/search...String=7920481
Is that what you're looking for? The actual URL to the TID directly is very long and complicated so the shortened search string above is generally used.

Can iTunes search for all music on my system and rebuild the library?

Is there any way to make iTunes search for all music on my hard drive and completely rebuild the library from scratch?
Thanks.

do you know how to re-locate files to an existing library?
All of a sudden, about 2/3 of my songs (over 6,000) will not play and a box comes up saying "The song 'x' could not be used because the original file cannot be found. Would you like to locate it?"
I went to Edit > Preferences > Advanced and have the correct (fixed) external drive letter selected for the folder location. and the files haven't moved, but iTunes isn't finding them. Restarted the computer making sure the drive was on.
I'd like to not lose all the ratings I've worked on. Hoping you or someone has a solution!!
thanks!

Since reconnecting bluetooth on my 3G after accidently dropping (the ap not the phone) I have successfully reconnected only to find the phone continuously searching for devices. To stop excessive draining of the battery I turn bluetooth off.

After successfully reconnecting my 3G iPhone to bluetooth (I accidently dropped bluetooth) the phone contantly searches for devices. Everything works fine now but it appears the battery is draining more rappidly because the phone is constantly searching in the background. I turn bluetooth off when I exit the but it drives me nutty. Any suggestions?

Is it possible to find out what serial or UDID info is stored on iCloud being used by the FindMyIphone site? The FMI website doesn't show anything but the name and the device image (which is a generic iPhone image, and definitely not the 5S )
Unfortunately not.

When I search for something, firefox opens a new tab with the results. How can I change the settings to where it will all stay in the same tab?

When I search something Firefox automatically opens a new tab with the results of this search. How do I change the settings to where the results will appear in the same tab as where I conducted the search?

Whether to open search results in new window most often is a setting of the search engine you are using.

Searching for Primes under One Million - A doubt in the JavaFX samples

Similar Messages

Maybe you are looking for