Searching for screen exit in Transport Organizer

Hi all,
I'm searching for a possibility to add an additional tab to the Transport Organizer with some additional fields. Is there any enhancement / screen exit available for this kind of extension without the need to modify the SAP standard?
Thanks in advance for any comment!

Hi MWALT,
I did some searches on transactions th Transporte Organizer and is not possible to do what you need, unfortunately.
Well, what I recommend you to do, is call a online program in the enhancements existing, perhaps can be a solution this problem.
Best regards,
Rafael Sá

Similar Messages

How to write the code for screen-exits

halo fellow SAPiens,
I want to add a screen for t-code AS01......for which i have created a sub-screen in the function grp (related to AS01)........now i need to link the sub-screen with the Standard SAP prgm..........i.e call the sub-screen........how can i do it...........

pls send me one example for implementing menu-exits,screen exits and
Screen exits - Urgent.
screen exits
Screen exit
Please reward points if helpful...

Help req for screen exit in migo

Hi guys,
I am using badi MB_MIGO_BADi to design an header screen i am facing following issues
1) It should be active for a particular plant. Now which badi/exit shld be use to export the value of plant
to badi to make it visible or invisible. IF its invisible does it also make it inactive??
2) to save the data from the screen into an z table. i put a break point in exit MB_CF001 but its not executing when
clicked on save while creating GRN against a PO.

Hi,
rearding the capturing of transit loss, I guess you can use the field 'Qty in Delivery note" to capture the Qty claimed to be delivered and capture the actual qty in the qty in Unit of entry field.
The difference would the transit lodd.
You can build reports on these.
Hope this helps.

How to Save Screen data using BADI for Screen Exit

Hi All,,
I have requirement got MIGO Transaction. Customer wants one tab besides VENDOR on header level. For that i used BADI 'MB_MIGO_BADI'. Also i created Append Structure in MKPF Table for two fields and designed sreen using SE51.
Now i want to save this data ( with added new fields ) into Data base table MKPF. I don't know where to place code .
Also pl confirm me that, when i copy Sample Code from
Go to -> Sample Code -> Copy . All the code is copied from BADI. So is it necessary to keep the code for each method as it or i have to comment all the code i each methos. i am littel bit confused abt it. Please tell me in detial.
Also tell where to put logic for saving newly added fields .
waiting
Thanks and Regards.
Ulhas

is this the one you are looking for?
Learning Series SAP NetWeaver Process Orchestration, Business to Business Add-on 2d OFTP Adapter

Search for the exit of clear account

Before saving, I want to get the datas of clear account and cleared account which saved in table BSIK and BSAK. Could anybody help me with the exit. Many thanks.
BTW the standard posting account exit 00001030 can not satisfy my requirment.

Try the following:
set echo on
column segment_name format a30
column tablespace_name format a15
column owner format a15
select tablespace_name, owner, segment_name, bytes/1048675 SizeM
from dba_segments
where (tablespace_name, bytes) in (
select tablespace_name, max(bytes)
from dba_segments
group by tablespace_name
This will find the largest segment. If you want to limit it to tables then add another where clause condition on segment_type = or in the types you are interested in.
You can find dba_segments described in the Oracle version# Reference manual along with all the Oracle rdbms dictionary views.
HTH -- Mark D Powell --

Search for User Exit in VI02

Hi,
I need found a user exit in VI02.
Can you help me ?

Hi,
Check the follows BADIS, they could be helpful:
BADI_SCD_ACCTG
BADI_SCD_CREATE
BADI_SCD_CREATE_CHCK
BADI_SCD_PROCESS_CHK
BADI_SCD_SAVE
BADI_SCD_TRANSFER
Check the userexit V54U0004(SMOD)
Regards
Kiran Sure

Searching for paticular photos in the organizer

Most of my tags are people and places. So today I wanted to find find the pictures that included the people tag 'me' and the place tag 'school'. I clicked the boxes next to these two tags, but instead of showing me only the photos that fit into both these categories it showed me all of the photos from each category, with tick or no-entry sign to say if the matched. Is there a way to view only the complete matches so its just photos that fit into both the tags.
Thankyou

http://www.johnrellis.com/psedbtool/photoshop-elements-faq.htm#_Workarounds_for_exclude-ph otos-from

To add screen exits to a existing transaction ( Purchase order) - ME33k

Hi,
Can anyone tell me whether how to add screen exits to a particular transaction
Transaction - ME33k.
I need to add a screen to the existing transaction, so how do i do that
can any one suggest me the way
i know the BADI which can be used for the same
ME_PROCESS_PO
ME_PROCESS_PO_CUST
GOS_SRV_SELECT
but can anyone suggest me a better so as to how to implement them !
thanks,

Hi
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data. It is determined be SAP where the sub screen will be displayed. The syntax is: CALL CUSTOMER-SUBSCREEN The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated. Note: Function codes are only processed in the main screens flow logic You are not allowed to enter a name for the subscreens command field You are not allowed to define GUI stauses You are not allowed to enter a value for Next screen The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen The developer must create the subscreen and the corresponding PBO and PAI modules How to identify screen exits Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify. Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits MENU EXITS Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu. Function codes for menu exits all start with "+" Example We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will run report ZTEST. Goto transaction SE43 Area Menu Maintenance In Area Menu Paramenter type 'S000' (S triple Zero) Select Change and ignore all the warning screens Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function" Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01 Goto transaction SE93 and create transaction +C01 that calls report ZTEST. Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear. USER EXITS User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module. The naming standard of function modules for functionmodule exits is: EXIT_<3 digit suffix> The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix> Example: The program for transaction VA01 Create salesorder is SAPMV45A If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits): CALL CUSTOMER-FUNCTION '003' exporting xvbak = vbak xvbuk = vbuk xkomk = tkomk importing lvf_subrc = lvf_subrc tables xvbfa = xvbfa xvbap = xvbap xvbup = xvbup. The exit calls function module EXIT_SAPMV45A_003 2. How to find user exits Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter. You will now come to a screen that shows the function module exits for the exit. 3. Using Project management of SAP Enhancements We want to create a project to enahance trasnaction VA01 Go to transaction CMOD Create a project called ZVA01 Choose the Enhancement assign radio button and press the Change button In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed Press Save Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit. Now the function module is displayed. Double click on include ZXVVAU04 in the function module Insert the following code into the include: E_KUNNR = '2155'. Activate the include program. Go back to CMOD and activate the project. Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155" Please check if the thread given below would be of any help. http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696# http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction

Menu Exit & Screen Exit Implementation Step by Step Implementation Needed:

Hi Experts,
I am in need of how to implement Menu Exit and Screen Exit using a simple
example.If any step by step implementation through snapshots were it will be
helpful instead just some links that doesn't work after some steps due to version
changes or not proper steply explanations.Points will be rewarded accordingly.
Thanks for your help in Advance.

Hi Sudha,
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Please check if the thread given below would be of any help.
http://sap.ittoolbox.com/groups/technical-functional/sap-r3-dev/menu-exits-72696#
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
Regards
KK

Screen exit-user exit- menu exit.

What are these and what is the difference?They look so similar.
Help me to differentiate please.
Points guaranteed man.
Nik

Hi Nikhil,
I am giving you a part of a document.
Hope it helps.
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
 You are not allowed to enter a name for the subscreens command field
 You are not allowed to define GUI stauses
 You are not allowed to enter a value for Next screen
 The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
 Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
 The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
 Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
 xvbak = vbak
 xvbuk = vbuk
 xkomk = tkomk
importing
 lvf_subrc = lvf_subrc
tables
 xvbfa = xvbfa
 xvbap = xvbap
 xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
 Create a project called ZVA01
 Choose the Enhancement assign radio button and press the Change button
 In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
 Press Save
 Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
 Now the function module is displayed. Double click on include ZXVVAU04 in the function module
 Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
 Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Regards,
Suruchi

Menu Exit and Screen Exit

Hi PPL,
Can anybody help me out in explaining me how to find a menu exit or the
Screen exit in a program...I have an requirement where i need to use both of them..
I have already posted this query , but people responded with links which had the
information on these two , but not the way to locate these...
I ll be very grateful for ur advice.
Regards,
Kevin Nick.

hi kevin
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project, and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules. These function modules belongs to the same function group as the subscreen
Subscreens are edited with transaction CMOD. When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule. The code for the function module is writeen by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements. Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
regards
ravish
plz reward points if helpful

Enhancement - Screen exit

Hi All,
Requirement is to add couple of fields in Standard transaction.
Please let me know the steps of finding the Exit and development steps.
Thanks in advance.
Ravi

Hai Ravi
User Exits
Screen exits are exits that allow you to use a reserved part of the screen (A subscreen) to display or input data.
It is determined be SAP where the sub screen will be displayed.
The syntax is: CALL CUSTOMER-SUBSCREEN
The screen exit is not processed untill the corresponding subscreen has been created in an enhancement project,
and the project has been activated.
Note:
Function codes are only processed in the main screens flow logic
You are not allowed to enter a name for the subscreens command field
You are not allowed to define GUI stauses
You are not allowed to enter a value for Next screen
The global data of the program is not available for the subscreen. Data for the subscreen is provided by function modules.
These function modules belongs to the same function group as the subscreen Subscreens are edited with transaction CMOD.
When you activate a project containg subscreens, the calling screen is regenerated and the subscreen is displayed next
time you display the calling screen
The developer must create the subscreen and the corresponding PBO and PAI modules
How to identify screen exits
Look after CALL CUSTOMER-SUBSCREEN in the screenprogram of the screen you want to modify.
Use transaction CMOD menu Utillities -> SAP enhancements to search for screen exits
MENU EXITS
Menu exits allow you to add your own functionallity to menus. Menu exits are implemented by SAP, and are reserved menu
entries in the GUI interface. The developer can add his/her own text and logic for the menu.
Function codes for menu exits all start with "+"
Example
We want to create a new menu item in the Office menu. The text for the menu should be "Run ZTEST", and the menu will
run report ZTEST.
Goto transaction SE43 Area Menu Maintenance
In Area Menu Paramenter type 'S000' (S triple Zero)
Select Change and ignore all the warning screens
Expand the office menu. In the buttom of the office tree you will find a menu named "Customer function"
Double click on the text. In the pop-up screen change the text to "Run ZTEST". Note that the trsnaction code is +C01
Goto transaction SE93 and create transaction +C01 that calls report ZTEST.
Now you will se the menu displayed in the office tree. If you delete transaction +C01 again, the new menu will dissapear.
USER EXITS
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a functionmodule.
The code for the function module is writeen by the developer. You are not writing the code directly in the function module,
but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is: EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as: CALL CUSTOMER.-FUNCTION <3 digit suffix>
Example:
The program for transaction VA01 Create salesorder is SAPMV45A
If you search for CALL CUSTOMER-FUNCTION i program SAPMV45A you will find ( Among other user exits):
CALL CUSTOMER-FUNCTION '003'
exporting
xvbak = vbak
xvbuk = vbuk
xkomk = tkomk
importing
lvf_subrc = lvf_subrc
tables
xvbfa = xvbfa
xvbap = xvbap
xvbup = xvbup.
The exit calls function module EXIT_SAPMV45A_003
2. How to find user exits
Display the program where you are searching for and exit and search for CALL CUSTOMER-EXIT
If you know the Exit name, go to transaction CMOD. Choose menu Utillities->SAP Enhancements.
Enter the exit name and press enter.
You will now come to a screen that shows the function module exits for the exit.
3. Using Project management of SAP Enhancements
We want to create a project to enahance trasnaction VA01
Go to transaction CMOD
Create a project called ZVA01
Choose the Enhancement assign radio button and press the Change button
In the first column enter V45A0002 Predefine sold-to party in sales document . Note that an enhancement can only
be used i 1 project. If the enhancement is allready in use, and error message will be displayed
Press Save
Press Components. You can now see that enhancement uses user exit EXIT_SAPMV45A_002. Double click on the exit.
Now the function module is displayed. Double click on include ZXVVAU04 in the function module
Insert the following code into the include: E_KUNNR = '2155'.
Activate the include program. Go back to CMOD and activate the project.
Goto transaction VA01 and craete a salesorder. Note that Sold-to-party now automatically is "2155"
Have look at this links
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
http://www.sapgenie.com/abap/ole.htm
http://help.sap.com/saphelp_46c/helpdata/en/59/ae3f2e488f11d189490000e829fbbd/frameset.htm
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/BCCIOFFI/BCCIOFFI.pdf
User Exist Finding
Go to se93 and give the tcode to find the main program associated to it.
Go to se38 and give the main program.
Find the package associated to it.Go to->Object Directory Entry.
Go to smod transaction.
Press f4.
Press Information System Button.
Give the Project(Dev Class).
Press enter.
Find the enhancements associated
User Exist System Tables
1. MODSAP & MODSAPT is the table.
2. Where we can give the enhancement name.
3. Component type will be E
for getting the FMs.
E Function exit
S Screens
T Tables
C GUI code
Field Exist Creation
Step by step procedure for creating Field Exits
There are eight steps to creating a field exit:
Step 1: Determine Data Element
Step 2: Go To Field Exit Transaction
Step 3: Create Field Exit
Step 4: Create Function Module
Step 5: Code Function Module
Step 6: Activate Function Module
Step 7: Assign Program/Screen
Step 8: Activate Field Exit
Step 1: Determine Data Element
- Before you can begin adding the functionality for a field exit, you must know the corresponding data element.
- An easy way to determine the data element associated to a particular screen field is to:
Go the appropriate screen.
Position the cursor in the appropriate field.
Press F1 for field-level help.
Click on the Technical info pushbutton (or press F9) on the help dialog box.
On this Technical Information dialog box, the data element will be specified if the field is 'painted' from the ABAP/4 Dictionary.
Step 2: Go To Field Exit Transaction
- The transaction to create field exits is CMOD.
- You can use the menu path Tools -> ABAP/4 Workbench -> Utilities -> Enhancements -> Project management.
- From the initial screen of transaction CMOD, choose the Text enhancements -> Field exits menu path.
- After choosing this menu path, you will be taken to the field exits screen. From here, you can create a field exit.
NOTE : Even though you use transaction CMOD to maintain field exits, you do not need to create a project to activate field exits.
Step 3: Create Field Exit
- From the field exit screen of transaction CMOD, choose the Field exit -> Create menu path.
- After choosing this menu path, a dialog box will prompt you for the appropriate data element .
- Enter the data element name and click the Continue pushbutton.
- Now, you will be able to create the function module associated to the data elements field exit.
Step 4: Create Function Module
- You will automatically be taken to the Function Library (SE37) after entering a data element name and clicking the Continue pushbutton.
- In the Function module field, a function module name will be defaulted by the system based on the data element specified. This name will have the following convention:
FIELD_EXIT_<data element>
- You can add an identifier (an underscore followed by a single character ).
- The first function module for a data elements field exit must be created without an identifier.
- To create the function module, click on the Create pushbutton, choose menu path Function module -> Create, or press F5.
- After choosing to create the function module, you will get the warning: "Function module name is reserved for SAP". This message is just a warning so a developer does not accidentally create a function module in the field exit name range. By pressing Enter, you will be able to go ahead and create the function module.
- Before coding the function module, you will have to specify the function modules attributes -- function group, application, and short text.
Step 5: Code Function Module
- From the function modules attributes screen, click on the Source code pushbutton or choose the Goto -> Function module menu path to the code of the function module.
- Here you will add your desired functionality for the field exit.
- Remember that field exits function module will have two parameters -- one importing parameter called "INPUT" and one exporting parameter called "OUTPUT". These parameters will be set up automatically by the system.
- You must remember to assign a value to the OUTPUT field. Even if the value does not change, it must be moved from the INPUT field to the OUTPUT field.
Step 6: Activate Function Module
- After coding the function module, you must remember to activate it.
- Use the Function module -> Activate menu path to activate the function module.
- At this point, you can return to the field exit transaction.
- You should be able to 'green arrow' back to this transaction.
- When you return to the field exit transaction, you will see an entry for the newly created field exit.
- At this point, the field exit is global. That is, it applies to all screens that use a particular data element. On any screen that uses the data element, the corresponding field exit function module will be triggered, once it is active.
- Also, the field exit will not be triggered yet because it is inactive.
Step 7: Assign Program/Screen
- This step is only needed if you want to make a field exit local.
- To make a field exit local, select the field exit and click on the Assign prog./screen pushbutton.
- In the dialog box , indicate the appropriate program name and screen number.
This information indicates that the field exit is local to the specified screen in the specified program.
- In the dialog box, you determine which function module gets executed for the field exit by specifying the identifier in the Fld. Exit field.
- If this field is left blank, the function module triggered will be 'FIELD_EXIT_<data element>'.
- If a single-character identifier is entered into the field, the function module triggered will be 'FIELD_EXIT_<data element>_<identifier>'.
Step 8: Activate Field Exit
- The field exit must be active for it to be triggered by the system.
- Activate the field exit by choosing the Field exit -> Activate menu path.
- After assigning the field exit to a change request, its status will change to Active and it will be triggered automatically on the appropriate screen(s).
NOTE : In order to activate the field exit the profile parameter abap/fieldexit = YES must be set on all application servers
Thanks & regards
Sreenivasulu P

Screen Exit not getting transported - Urgent

Hello Everyone
We are implementing the enhancement PPCO0012 to display additional data in a tab on the Production Order Header. Did everything as per the documentation and activated the enhancement in SMOD and the associated project in CMOD. The transports were released to QA. The enhancement and CMOD project is also active in QA. However the screen object that was created under the function group XCO1 did not get transported to QA. Has anyone experienced this kind of a situation before?. Can you please suggest any solution to overcome this? Any help is greatly appreciated.
Thanks
Raju Ramaswamy

Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode?

Problem in transporting MIGO BADI screen exit?

Hi all,
I have implemented MB_MIGO_BADI for screen-exit of the MIGO.
Whem transporting I am getting an error that
Table ZMIGO_BADI_EX_SCREEN_FIELD could not be activated
(E- Routine EXPAND (Table ZMIGO_BADI_EX_SCREEN_FIELD could not be expanded) )
Table Type ZTY_T_EXTDATA could not be activated
(E- Row type ZMIGO_BADI_EX_SCREEN_FIELD is not active or does not exist ) .
But this row type is in the same request number and activated also ?
I am unable to identify the reason. Please help me to solve this problem?
Thanks,
Vamshi

Hi,
Go to se80 and display the program name which you might have given in methof IF_EX_MB_MIGO_BADI~PBO_DETAIL and activate the screen which you have created,
Thanks,
Shailaja Ainala.

Screen exit for me32k for header and for items

hi experts,
i need a screen exit from me32k to add subscreen in :
1. items
2. header
thanks in advanced,
dana.

Hi,
Just some information on screen exits:
Screen Exit:
How to implement screen exit for a SAP standard transaction
Introduction
SAP provides standard transactions to enter data into database. But a client may want to maintain some additional information in SAP other than what is provided.
To make provisions for this, additional screens have to be provided and additional fields must be added into appropriate database table.
To pave way for this, SAP has provided the option for screen exits. Usually, SAP provides the following:
An append structure in the database table with the new fields.
A subscreen area into the standard screen where the programmer can attach his subscreen of his own program with the new fields.
A function group under which the new subscreen has to be created with the new fields.
Function exits to synchronize the PBO and PAI of the standard SAP program with the PBO and PAI of the subscreen so that data can flow back and forth between the standard SAP program and the program written by the developer for the subscreen. These function modules also exist in the same function group under which the subscreen will have to be developed.
Finally, a linkage has to be done between the subscreen area of standard SAP screen with the custom subscreen constructed by the developer.
Typically, SAP provides an enhancement in which the developer can create an append structure, use the function exits to synchronize the PBO and PAI of the standard SAP program and the custom subscreen program, and make the necessary linking( as mentioned above in step 4. But, again, this is not a hard and fast rule. Linking in some case, is also done by configurations.) SAP also usually provides the name of the function group under which the subscreen has to be developed.
Necessary guidance about implementing a screen exit development is usually available in the Documentation section of the enhancement ( can be availed by transaction SMOD).
Pre-Requisites
The developer to work on screen exit should have essential knowledge on the following:
DDIC concepts, including the knowledge of append structure.
Concept of SAP Enhancements and implementing them using Projects.
Concept of function exits.
Knowledge on Module Pool including subscreens, Tabstrip controls etc.
Steps
Guidelines
So, a developer can follow the guidelines mentioned below to implement a screen exit to a standard SAP transaction, as and when required:
Find out the Required Enhancements
Go to SMOD. Press F4 in the Enhancement field. In the next popup window, click pushbutton SAP Applications. A list will appear that contains information on all the enhancements, categorized under functional areas. Developer must search for the enhancements relevant to his functional area of interest for e.g., Purchasing, Asset Accounting, etc.
Note down the enhancements. Then, come to the initial screen of SMOD and view the documentation of each enhancement to find out which one is required for your development.
Utilize the Enhancement in a Project
After you have found one, do as directed in the documentation. Generally, the steps are as follows:
Create a project using CMOD including your enhancement.
Create the append structure with new fields.
Go to the desired function group and create a subscreen with the new fields. Write PBO and PAI for the subscreen, if required.
Use the function exits in the enhancement to link the PBO and PAI of the subscreen with that of the main SAP program supporting the SAP transaction.
Maintain necessary linkage between the subscreen area of standard SAP program with the custom subscreen developed along with the custom program name. This can be done in the project (developed by CMOD including the enhancement) or outside as a part of configuration.
Activate the project.
Test to ensure that required functionality are met.
Case Study 1
Add three new custom fields for Asset master and maintain information for them
Requirement
Three fields in the legacy system have to be maintained in Asset master. These fields are:
Original Asset number 20 characters
Location 2 15 Characters.
Model no 20 characters
Location 2 should start with L.
Pre-Analysis
Finding out the Enhancement
As described above, the enhancement is determined. It was found, that enhancement AIST0002 will serve the purpose. It contains the following components (can be viewed by transaction SMOD):
Exit Type Description EXIT_SAPL1022_001 Function Exit Check of User-Defined Fields when Using Create and Change BAPI EXIT_SAPLAIST_002 Function Exit Transfer Data for User Subscreens in PBO. EXIT_SAPLAIST_003 Function Exit Transfer of User-Defined Fields to SAP Master Data Transactions CI_ANLU Customizing Include Include structure to add new fields
Studying the Function Exits
The function module level documentation for the function exits are then viewed from transaction SE37. The documentation clearly laid out for the purpose for their use:
EXIT_SAPLAIST_002
Function module Level Documentation
This function module is called by asset master data maintenance at the start of the dialog. (When changing, it is called after reading of the data from the database; when creating it is called after the transfer of the default values from the asset class and reference asset.) The purpose of the function module is to enable this function group to recognize the master data. For interpreting or controlling master data fields that are important for user fields, it is possible to transfer to global variables at this point, so that they can be recognized when the user subscreens are processed.
Import Parameters
Understanding
This function module is called at the PBO to pass the information retrieved from the database to pass them to the custom subscreen and its underlying program. Import parameter : I_ANLU will be populated with the values for user-defined fields which will be passed to the subscreen program. So, there must be some sort of variable assignment from I_ANLU.
EXIT_SAPLAIST_003
Function module Documentation: This function module is called by SAP asset master data maintenance after the screens are processed, but before saving. The purpose of the function module is to transfer fields entered on user sub-screens of SAP asset data maintenance to the database for updating. The export parameter for this function module is:
Understanding
This function module will be used to transfer the user entered data in the subscreen fields to the main SAP program, which will then be saved into the database.
Studying the Documentation of the Enhancement
The enhancement documentation (as is viewed from the initial screen of SMOD] also supports the idea. Moreover, it informs that we need to develop a subscreen under function group XAIS. This is the function group under which the two function exit modules also exist. So, if the custom subscreen refers to the global data of the function group XAIS, then those values will also be available to these function exits as well.
Going to SE80 and viewing the function group XAIS helps us to inform that there are three DDIC tables declared for it:
Deciding the Final course of Action
After making all the investigations, the final course of action was determined.
SrlNo Step Justification
A project has to be created using transaction CMOD where the enhancement AIST0002 will be included.
Customizing include CI_ANLU has to be created with the custom fields demanded When CI_ANLU will be developed, the custom fields will get appended to the database table ANLU. Also, these fields will be used to create screen fields in the new subscreen.
A custom subscreen, say, 9000 will be developed under function group XAIS. The screen group for the screen will be CUST (or any name). The three custom fields added to table ANLU (by creating CI_ANLU) will be used to create new fields in the screen.
In the PAI of the subscreen, validation for Location to start with L will be added. The subscreen with three new fields has to be developed so that it can be attached to a subscreen area of the asset master screens.
In the custom include of the function exit module EXIT_SAPLAIST_002, the following code will be written:-
ANLU = I_ANLU. I_ANLU is the import parameter of this FM. The value is assigned to the global variable ANLU, referring which the three new subscreen fields are developed. So, data retrieved from database table ANLU will be passed to this FM as I_ANLU by the standard SAP main program. The value will be taken and passed to the global variable of the function group XAIS, so that the three custom fields (referring to ANLU of XAIS) get populated.
In the custom include of the function exit module EXIT_SAPLAIST_003, the following code will be written:-
E_ANLU = ANLU. The changed values in the subscreen fields exist in global variable ANLU for the function group XAIS. This function exit module will pass the data back to the SAP main program as E_ANLU.
Proper linkage/configuration has to be done so that the new subscreens get linked to the appropriate subscreen area of the Asset master screen. This has to be done otherwise, the new custom subscreen will not be displayed in the Asset master screens.
Development
Creating a Project to include the enhancement
Go to transaction CMOD and create a project.
Enter a description for the project. Then, click on the pushbutton Enhancement Assignments in the Application Toolbar.
Enter the name of the enhancement and Save.
Go to Components.
Creating Custom Include for ANLU
The screen shown below will appear, showing all the enhancement components under the assignment AIST0002. Double-click on the name of the Include Structure to create it.
Create the include structure with three new fields, as required. Then, save and activate it.
Develop the subscreen and the program
Go to transaction SE80. For the function group XAIS, create a new subscreen 9000.
Create it as subscreen.
Then, go to the Layout of the screen and create three new fields from Database table ANLU.
Drag the fields in the screen body and place them.
Then, save and activate the screen and come back to screen flow editor.
Create the PAI module to add validation for field Location 2, as required .
Activate the whole function group and come out.
Write code in the Function Exits to synchronize the programs
Now, code has to be written in the function modules EXIT_SAPLAIST_002 and EXIT_SAPLAIST_003 so that data flows to and fro between the main SAP program and custom subscreen program. For that, go back to transaction CMOD and change the function exits.
Write code in the function module EXIT_SAPLAIST_002 called once at the beginning of the transaction:
Write code in EXIT_SAPLAIST_003 to pass the data from the subscreen to SAP main program.
Then, activate everything the whole project and come out.
Complete the configuration to link the subscreen
The development portion is complete. Now, linking of the subscreen has to be done with the subscreen area of the main program. In most of the cases, this linking can be done in the enhancement itself. But, here, requirement is a bit different. It is done by configuration using SPRO.
Assets are created under Asset class. And for each asset class, there is a layout assigned to it. For a layout, there are multiple tab pages assigned to it. And, for each tab page, there are multiple screen groups/field groups assigned.
Here, the requirement is to create these three custom fields in the tab page General of asset master screen ( AS01/AS02/AS03/AS91).
Determine the Layout
To achieve this, first of all, we need to find out which layout is assigned to asset class 1000.For that, go to transaction AOLK( information has to be obtained from functional consultant).Select the Asset Class 1000 and click on folder General Assignment of Layout.
Here, for Asset class 1000, for all the user groups, tab layout SAP is assigned. Since layout SAP cannot be changed, it has to be copied and manipulated to include our screen group. Later, the new layout has to be assigned over here.
Create new tab layout
Go to transaction AOLA. Copy the tab layout SAP to create another layout, say, YSUB.
System will copy all the settings and will inform you about that.
Select your newly created layout and double-click on the folder Tab page titles.
You want to put your custom fields in the tab page General. So, select this tab page entry and double-click on the folder "Position of Groups".
Here, all the field groups currently residing in the tab-page General are shown. Add an entry for your newly created fields.
Select the group box from the list. An entry will come with U padded with the custom subscreen prepared by you.
Then, save and come out.
Assign the new Layout to Asset Class
Now, go to tcode AOLK and assign tab layout YSUB for asset class 1000.
Save and come out.
Test the Exit
Everything is over. Now, go to transaction code AS01/02/03 or AS91 to deal with an asset of asset class 1000. You will see your new fields added to the screen. Add values to themsave. Then, enter into the tcodes again to see whether the values entered by you are being displayed or not.
Original Source: ittoolbox.com
User Exits:
User exits (Function module exits) are exits developed by SAP. The exit is implementerd as a call to a function module. The code for the function module is written by the developer. You are not writing the code directly in the function module, but in the include that is implemented in the function module.
The naming standard of function modules for functionmodule exits is:
EXIT_<program name><3 digit suffix>
The call to a functionmodule exit is implemented as:
CALL CUSTOMER.-FUNCTION <3 digit suffix>
To find a Exit.
Goto Transaction -- Find The Package
SMOD >f4>Use the Package here to Find the Exits In the Package.
Else if you Want to search by Application Area wise ,
There is one more tab to find the Exits in the Respective Application Area.
Implementing the Exit-- CMOD Create ProjectsAssgn your Component .
Now Run ur Transaction to Check if it Triggers.
Thats it..
Suppose you need to find out all the user exits related to a tcode.
1. Execute the Tcode.
2. Open the SAP program.
3. Get the Development Class.
4. Execute Tcode SE84.
5. Open the Node 'Envir. -> Exit Techniques -> 'Customer Exits -> Enhancements'
6. Enter the Development class and execute.
Check out this thread..
The specified item was not found.
1. Type the transaction : system->status-> <PROG. NAME>
2 open SE37 , type EXIT<PROG NAME> and press F4 to get the list of function exits available.
3. Open CMOD utilities->SAP enhancements
EDIT->All selections
4.type the function module name obtained in step 2, in fields 'component name' in 'additional selections' block. and execute.
5. The displayed list contains the enhancements names for the transaction You were looking for.
6. Create a project in CMOD and the code in default include->activate.
http://www.erpgenie.com/sap/abap/code/abap26.htm
which gives the list of exits for a tcode
http://help.sap.com/saphelp_nw04/helpdata/en/bf/ec079f5db911d295ae0000e82de14a/frameset.htm
For information on Exits, check these links
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sapgenie.com/abap/code/abap26.htm
http://www.sap-img.com/abap/what-is-user-exits.htm
http://wiki.ittoolbox.com/index.php/HOWTO:Implement_a_screen_exit_to_a_standard_SAP_transaction
http://www.easymarketplace.de/userexit.php
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sappoint.com/abap/userexit.pdfUser-Exit
http://www.planetsap.com/userexit_main_page.htm
User-Exits
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://www.sap-img.com/ab038.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.sap-basis-abap.com/sapab013.htm
http://sap.ittoolbox.com/documents/popular-q-and-a/user-exits-for-the-transaction-code-migo-3283
These links will help you to learn more on user exits.
http://www.sap-img.com/abap/a-short-tutorial-on-user-exits.htm
http://help.sap.com/saphelp_nw04/helpdata/en/c8/1975cc43b111d1896f0000e8322d00/frameset.htm
http://www.planetsap.com/userexit_main_page.htm
http://www.allsaplinks.com/user_exit.html
www.sap-img.com/abap/what-is-user-exits.htm
Also please check these threads for more details about user exits.
Re: Screen exit
user exit and customer exit
user exit
1. Document on UserExits in FI/CO
http://www.ficoexpertonline.com/downloads/User%20ExitsWPedit.doc
2. Finding User Exits...
http://sap.ionelburlacu.ro/abap/sap2/Other_Useful_Tips.html#Finding_User_Exits
3. List of all User Exits...
http://www.planetsap.com/userexit_main_page.htm
Reward if found helpfull,
Cheers,
Chaitanya.

Searching for screen exit in Transport Organizer

Similar Messages

Maybe you are looking for