Searching for the driver for HP4192A
Does anyone on the net have LABVIEW driver for
LF IMPEDANCE ANALYZER HP4192A ?
Please send me driver.
Thank you in advance.
Alan
Brodarski Institute
Measurements, Vibrations & Acoustics Dept.
Ave. Veceslava Holjevca 20
HR-10 020 Zagreb
CROATIA
E-mail: [email protected] ; [email protected]
"Alan ©timac" wrote:
Hi
The driver for HP 4192 is available on NI's web site but its rather naive.
But it does help in getting started.
ITs under DRIVERS AND DOWNLOADS at ni.com
AJAY ANAND
>Does anyone on the net have LABVIEW driver for>LF IMPEDANCE ANALYZER HP4192A
?>Please send me driver.>Thank you in advance.>>Alan>Brodarski Institute>Measurements,
Vibrations & Acoustics Dept.>Ave. Veceslava Holjevca 20>HR-10 020 Zagreb>CROATIA>>E-mail:
[email protected] ; [email protected]>>>>
Similar Messages
-
Disk Utility "waiting for the drive"
I'll be calling Applecare on this, but would like to know if anyone else has experienced this problem:
I have a 2 month old MBP with the following model Super Drive:
HL-DT-ST DVDRW GSA-S10N (according to System Profiler, it can write to all formats including -R, +R, DL). From another thread, I assume this is an LG?
I decided to test the drive - made a short 40 second movie and created a disk image. Upon opening Disk Utility and inserting a DVD (Verbatim +R), I got the following: "waiting for the drive" for 5 minutes. Ejected the disk and tried again - same result.
On the third try, it actually recognized the DVD, but only gave me the option to burn at 4x or 8x. I usually burn at the slowest speed available (2x), so I cancelled, ejected the disk and tried again. Fourth and fifth tries: no action, just "waiting for the drive".
I then tried to use Toast with the Super Drive; before inserting the disk, I set Toast to burn at 2x, but once I inserted the disk, Toast recognized it, but changed the available burn options to 4x or 8x.
Next I connected my external burner and got the options to burn at 2.4x, 4x, or 8x both in Disk Utility and Toast.
I then used the same disk on my iMac; tried both the Super Drive and my external burner (using both Disk Utility and Toast with both) and got the following burn options:
iMac Super Drive/Disk Utility: 2.4x, 4x, 8x
iMac/external burner/Toast: 2x, 4x, 6x, 8x
There seem to be a couple of issues:
The "waiting for the drive" problem (what could possibly cause this?)
The "non-availability" of a slow burn speed of the Super Drive
And a third problem: this DVD drive is the slowest I've ever experienced; it took 50 seconds for the icon to appear on the desktop after inserting the DVD vs. 7 seconds on the iMac (this is the DVD I burned using Toast/exterbal burner,testing it on a TV and the iMac). It played fine on all three.
Has anyone encountered a similar "waiting for the drive" issue and/or the fact that this drive takes a very long time to recognize/read a DVD?
Appreciate any input!I spoke with a product specialist at Apple and it was agreed that we'd wait to see if the problem persisted; at that time, we'd talk about getting the drive replaced.
-
When trying to update Acrobat XI I get a 1328 error each time. I have uninstalled XI and reinstalled it from disk. When trying to update the newly installed XI I still get the 1328 error. I have searched my C: drive for the file C:\config\Msi\PTA082.tmp but with no sucess. Any suggestions?
Hi Berriedale,
Please try the below steps and check.
Turn off any antivirus or software security program.
Download the update patch 11.0.10 manually from the below link and run it.
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5859
Regards,
Anand -
Windows 7 recognizes my HP Printer but won't install the driver for it
I just bought a brand new computer with Windows 7 64bit installed on it.
After hooking it up, I connected my HP psc 2175 All In One Printer to it.
Windows 7 recognized that I had an HP psc 2100 series printer and said that it would go online to look for the driver to install.
After 10 minutes of searching, it tells me that I need "troubleshooting" which means "go look for it yourself."
I went to the HP website and the only help I found was a page telling me how to get my Windows 7 to recognize my printer.
My Windows 7 already recognizes it.
What I need is an explanation about to make Windows 7 download the proper Printer Driver to allow my printer to work.
Any help?
Does this driver not exist for Windows 7 and HP PSC 2175 All In One Printer?So the HP page says there is no driver at all for my Printer with Windows 7 ( Lucky Me) and that I need to configure my Windows 7 to use the automatic Windows Update to find a driver to install.
As I mentioned in my original post, it already did this.
It recognized my printer and then starting searching for a driver with no luck.
Anyway, next on the HP page it tells me to connect my printer to my computer with a USB cable and then Windows 7 will look for the most appropriate driver to make my printer work.
So I connect the USB cable and it dings once and that's it.
No message.
No downloading.
No status bar.
Nothing.
It just dinged to recognize that I plugged in the USB cable.
According to the HP page, I should get a window telling me that My Automatic Windows Update is complete.
Mine apparently didn't even start.
So now what should I do?
How can I make it download the generic printer driver without just expecting it to do so simply because a USB cable was inserted? -
Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?
Where can I get the driver for my HP DE8A4L external USB CD/DVD drive?
On the label it says, Model HSTNN-PD06-91
and
HP PN: 518819-001 Rev.B
I've had my Mini 110-1000 running our music system for a couple of years, no complaints. When I wanted a CD/DVD drive, I purchased a DE8A4L external USB drive directly from HP. It didn't come with a driver disc. When I plug it in, the USB subsystem does not enable it. Device Manager shows a yellow exclamation point, saying, "Windows cannot load the device driver for this hardware..." It is running Windows XP Home Edition SP3.
What gives with this device?Following up on tactic 2) above, I upgraded the BIOS from version F07 to the latest version available on the HP download site, version F19. This went well, but unfortunately the system still does not recognize the device.
When I try to Device Manager, and select the DE8A4L DVD device, and try "search for a device driver", it says it cannot find a better match for the driver already installed.
This Mini 110-1000 only came with 1 Gb RAM, and Windows XP Home. Is one of these a critical limitation for running an external USB DVD drive? -
Can not find the driver for hp desjet 2515
Hi,
pls i have being searching online for the driver of my new hp Deskjet ink Advantage 2515 to install for my microsoft window 7 (32-bit) pls help.
Thank you,
olutoye jeremiahHi,
Please download the following package and install on your machine:
http://ftp.hp.com/pub/softlib/software12/COL42531/al-109467-1/DJ2510_1313.exe
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
I cannot Find the Driver for SB Audigy
Hello
I was looking on the Driver Update, but there is none:
I wanna know if the driver for a Sound Blaster Audigy ES w/o Firewire "SB062", is compatible with one that is on the database
please help meJaxxArmada,
Have you try using EAX driver? Go to the driver download page.
http://us.creative.com/support/downloads/
Scroll down to the "Search by Product" section, select "Sound Blaster", "Audigy", "Audigy Gamer" and set "File Type" to "Driver".
You will find the following files:
-AUD_EAX4DRV_0303.exe
-AUD_WEBUP_PCWDRV_-84-40.exe
Install them in above order.
Jason -
iMac late 2009 3,06GHz Intel Core Duo; 500gb hard drive, 12gb memory. OS X 10.8.5 (Mountain Lion)
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.'
I have been trying to install the driver for a Wacom Bamboo Pad. There are several driver packages listed on the website (the device is supplied ready to run with Windows devices) and I have tried tried downloading all the available drivers which apply to my set-up. Some will not open at all and I get a 'Damaged' message on my screen. Of the ones which open, I can download the .dmg and expand it but when clicked it opens as a window with multiple choice of languages and an icon which instructs you to click to open.
If I do this some versions repeat the 'damaged' message but the later ones generate a window saying:-
'“Install Wacom Tablet.pkg" can't be opened because the Identity of the developer cannot be confirmed.' - this is as far as I can get it to go; most frustrating!
I understand that Apple's security updates have recently included an alteration that causes this result, and that there is supposed to be a legal (i.e. Apple sanctioned) workaround to allow files like this to be opened. If this is so, can anyone enlighten me?Many Thanks, Kurt.
I knew I'd seen the solution you've provided somewhere - either in MacWorld or MacFormat - but couldn't remember the Gatekeeper bit!
I shall save it somewhere VERY safe now in case this happens again …
You have made an old man very happy and saved me from worrying that senile decay had suddenly set in. (I was 70 last week so you might understand the situation from that.)
Best wishes
OllyanDinah -
Windows Could not find the Driver for your Apple iPod USB Device (5G 30GB)
I have a 8GB iPod Nano. My roommate has a 30GB 5G Video. Black.
My iPod syncs flawlessly. His is not recognized by Windows or iTunes. Every time we plug in the iPod, it prompts us for the driver. I tried to install the update apple mentions through the windows process, but after going through the tedious Windows Genuine Verification process, I was told that the update didn't apply to my computer.
We use a Lenovo Thinkpad T60p, which shipped with Windows Vista Business.
We are running iTunes 7.3.1.3, and there are no windows updates available for the computer.
I have...
...reset
...reinstalled 7.3.1.3 (over and over and over)
...tried different USB ports. (Early on, we saw it once after swapping ports).
...tried turning off the ability of the computer to 'Turn this device off to save power."
I have also verified that the iPod works on my work Dell Lattitude D620 running XP, and that it's not the cord, as we've used the cord that came with my Nano as well.
So, the problem seems to be with vista, as many people seem to have had. The best thread I found that deals with this was http://discussions.apple.com/thread.jspa?threadID=995793.
But even after having tried everything, I still have an unrecognizable iPod.
When I run iPod diagonostics, everything seems okay, except for the iPod connection, which says failed. I've had difficulty working with the iPod service under Computer/Device Manager - it doesn't ever seem to stop or start, with the iPod plugged in or not.
And interestingly enough, the FAT32 external harddrive that I use to back up my data exhibits exactly the same problem ("Windows could not find the driver for your USB Mass Storage Device). This device worked great in XP, and even odder, I have a FAT32 partition of the main HD as a swap space between my VistaOS and my Ubuntu installation.
Do I have to chalk this up to another issue with Windows Vista? What bothers me there is that you're a ping-pong between windows support and apple support - no one really owns up the problem.Bill, I've been stuck in this loop for 3 months since buying a new laptop with Vista Basic. I've tried everything to no avail. I don't know what else to do apart from buying a cheap PC running XP. Let me know if you manage to find a solution and I'll do the same.
Regards. Adam -
Where can i download the driver for my network card? i have a macbook pro mid 2012, and are using windows 7 ultimate
uhm hey guys,
idk where else to get help so ima try here,
i got windows 8 installed with bootcamp on my macbook pro late 2010 (5, 5) and theres no sound coming out of it, so i installed an nvidia audio driver (idk, it could be the incorrect one) but i have nvidia GeForce 320 on my macbook.
do you know what i should install ?
but when i go onto my osx the sound is fine, so i figured im missing something on windows 8
Orrrr could i just go out and get parallels and hope it doesn't get the same problems? -
Where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011)
where can i download the driver for my ethernet controller on windows 7 (macbook pro 2011).
after the installation of windows 7 i cant use my wlan or audio.http://www.apple.com/support/bootcamp/
-
I have an early 2008 iMac running iOs 10.5.8.It has a 2.8 Ghz Intel Core 2 Duo. I need to upgrade to at least iOs 10.6 Snow Leopard in order to install the driver for a new HP OfficeJetPro 8610 printer. Which version of 10.6 would be the best for this Mac and how do I go about upgrading?
Click here and buy the DVD.
(115929) -
I have a hard drive for CD storage that needs to connect to the Ethernet router. sInce my router is not in this room, and in another room, I want to use my Mac as a router for the drive, and share the wifi. Ho do I do this? I gace tried the System Preferences -> Sharing, shared internet to Ethernet, but can't se ethe device on Finder
Djembe wrote:
UEFI (unified extensible firmware interface) boot requires Global unique identifier Partition Table (GPT) as opposed to the older Master Boot Record (MBR). If your existing drive is formatted in MBR, you will need to adjust BIOS settings to enable legacy boot in order for it to work properly.
Is there a performance difference between GPT and MBR? If GPT is better, I do not mind formatting the drive with it.
5. No special drivers are needed.
Thanks. What about the thunderbolt port?
7. I think Lenovo estimates 6 hours.
Lenovo says 6 hours with the 6-cell battery on its website.
BrendaEM wrote:
Hi,
There was a serious BIOS/UEFI problem with that SSD . Perhaps this thread will save you some headaches. Someone is recomending shutting off Rapid Boot in the setup, which would probable mean little with a SSD, anyway.
I read through this, and it looks like the problem was fixed in a BIOS update, which I plan to do. However, it also seems like Intel Rapid Start is not even worth it in the first place, as sleep consumes almost no power at all.
W540: i7-4700mq, K2100m, 8 GB DDR3L, 512 GB SSD
T510: i7-620m, NVS 3100m, 8 GB DDR3, 512 GB SSD -
I want to transfer files from a functioning hard drive in a nonfunctioning MacBook Pro to an external drive. I have an IDE/SATA drive adapter. The files won't fit on the drive for a working computer I have. Can I use it to transfer files to the external drive?
Good luck and you are welcome.
Like I said, I bought one of their inexpensive enclosures and now can use the hard drive just as a source for the files that are on it...my external drives are much larger and faster so I just plug that drive in when I need something from it.
This one is on sale for $16 http://eshop.macsales.com/item/OWC/ES2.5BPU2S/ -
Adobe Bridge shuts down when I try to access files on my external drive. Have been using the drive for several months with no problems.
Due to the current unavailability of clairvoyants and mind-readers in the forum, we respectfully request you supply sensible, complete details.
A lot more information about your hardware and software is needed.
BOILERPLATE TEXT:
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
a screen shot of your settings or of the image could be very helpful too,
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!
Maybe you are looking for
-
Excise Duty Capture of Invoice for Raw Materials
Dear All, New to CIN. I have created a Po and while trying to capture Ex. Invoice the system gives a runtime error saying that it found a division with zero and hence the termination. Can some body help? Nagarajan
-
Dear guru, In info record pricing conditon maintained ,after validity complited what we do real time in pricing procedure?
-
How do I fix error 4002 in iTunes
How do I ghet rid of the error message 4002 in iTunes?
-
I have a document that I needed to crop to get rid of extra white space. The document needs to be 8.5 x 11; however, when I crop it, it is naturally a smaller size. Is there any way that I can re-save this document as 8.5 x 11 or increase the size of
-
Can you disable the ellipsis bubble when responding to a text?
Can you disable the ellipsis bubble when responding to a text or iMessage?