Searching in Report 6i Like Crystal Report Facility
Can i search a particular Text in preview windows like in Seagate Crystal Report provide us. if so one knows solution of this problem plz tell me?
Regards
Hi,
no. You can run a Report as HTML for a lighter display view but there is no such thing as a preview
Frank
Similar Messages
-
JRC Export to Text like Crystal Report Designer Export
We need to Export report to Text like Crystal Report Designer Export using JRC. Is this possible? I see export ReportExportFormat CSV, PDF and RTF only. These exports are working, But I need plain text that looks like Text export of Crystal Reports Designer. I see this working in RAS 2008. What I can do to get this with JRC. I am using Crystal Reports 2008 to design reports.
Thanks for any help.
Regards
Raveendra
ClarificationThank you Jitin.
What could be solution to this problem?
If still I want to go with JRC, Can I write some Java code to perform this export?
I see TextExportFormatOptions and its not working.
If I want to export automatically to text format, what other choices are there?
Basically I need to execute report and generate text file automatically. Text file should look like Crystal Report Designer Exported Text file.
Thank you for your time.
Regards,
Raveendra -
Hello,
I am trying to install Microsoft SQL Server 2008 R2. I get the error bellow (Database Services Engine Failed, SQL Server Replication Failed, Full Text Search Failed, Reporting Services Failed). I already have a copy of SQL Server 2008 R2 on the machine.
I want to create a new named instance of SQL Server for some software I'm installing.
The error is below.
Any help would be much appreciated, thanks!
Overall summary:
Final result: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Exit code (Decimal): -595541211
Exit facility code: 1152
Exit error code: 49957
Exit message: SQL Server installation failed. To continue, investigate the reason for the failure, correct the problem, uninstall SQL Server, and then
rerun SQL Server Setup.
Start time: 2014-02-06 09:14:09
End time: 2014-02-06 11:18:16
Requested action: Install
Log with failure: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Exception help link: http%3a%2f%2fgo.microsoft.com%2ffwlink%3fLinkId%3d20476%26ProdName%3dMicrosoft%2bSQL%2bServer%26EvtSrc%3dsetup.rll%26EvtID%3d50000%26ProdVer%3d10.50.2500.0%26EvtType%3d0x44D4F75E%400xDC80C325
Machine Properties:
Machine name: BAHPBZ52TY
Machine processor count: 4
OS version: Windows 7
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID
Feature Language
Edition Version Clustered
Sql Server 2008 R2 SQLEXPRESS MSSQL10_50.SQLEXPRESS Database Engine Services
1033 Express Edition 10.50.1600.1 No
Sql Server 2008 R2
Management Tools - Basic 1033 Express Edition
10.50.1600.1 No
Package properties:
Description: SQL Server Database Services 2008 R2
ProductName: SQL Server 2008 R2
Type: RTM
Version: 10
Installation location: c:\c7ced2c86d6b9813b28186cc831c2054\x64\setup\
Installation edition: EXPRESS_ADVANCED
Slipstream: True
SP Level 1
User Input Settings:
ACTION: Install
ADDCURRENTUSERASSQLADMIN: True
AGTSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
AGTSVCPASSWORD: *****
AGTSVCSTARTUPTYPE: Disabled
ASBACKUPDIR: Backup
ASCOLLATION: Latin1_General_CI_AS
ASCONFIGDIR: Config
ASDATADIR: Data
ASDOMAINGROUP: <empty>
ASLOGDIR: Log
ASPROVIDERMSOLAP: 1
ASSVCACCOUNT: <empty>
ASSVCPASSWORD: *****
ASSVCSTARTUPTYPE: Automatic
ASSYSADMINACCOUNTS: <empty>
ASTEMPDIR: Temp
BROWSERSVCSTARTUPTYPE: Disabled
CONFIGURATIONFILE:
CUSOURCE:
ENABLERANU: True
ENU: True
ERRORREPORTING: False
FARMACCOUNT: <empty>
FARMADMINPORT: 0
FARMPASSWORD: *****
FEATURES: SQLENGINE,REPLICATION,FULLTEXT,RS,SSMS,SNAC_SDK,OCS
FILESTREAMLEVEL: 0
FILESTREAMSHARENAME: <empty>
FTSVCACCOUNT: NT AUTHORITY\LOCAL SERVICE
FTSVCPASSWORD: *****
HELP: False
INDICATEPROGRESS: False
INSTALLSHAREDDIR: c:\Program Files\Microsoft SQL Server\
INSTALLSHAREDWOWDIR: c:\Program Files (x86)\Microsoft SQL Server\
INSTALLSQLDATADIR: <empty>
INSTANCEDIR: C:\Program Files\Microsoft SQL Server\
INSTANCEID: aedt2bSQL
INSTANCENAME: AEDT2BSQL
ISSVCACCOUNT: NT AUTHORITY\NetworkService
ISSVCPASSWORD: *****
ISSVCSTARTUPTYPE: Automatic
NPENABLED: 0
PASSPHRASE: *****
PCUSOURCE: c:\c7ced2c86d6b9813b28186cc831c2054\PCUSOURCE
PID: *****
QUIET: False
QUIETSIMPLE: False
ROLE: AllFeatures_WithDefaults
RSINSTALLMODE: DefaultNativeMode
RSSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
RSSVCPASSWORD: *****
RSSVCSTARTUPTYPE: Automatic
SAPWD: *****
SECURITYMODE: SQL
SQLBACKUPDIR: <empty>
SQLCOLLATION: SQL_Latin1_General_CP1_CI_AS
SQLSVCACCOUNT: NT AUTHORITY\NETWORK SERVICE
SQLSVCPASSWORD: *****
SQLSVCSTARTUPTYPE: Automatic
SQLSYSADMINACCOUNTS: BAH\568385
SQLTEMPDBDIR: <empty>
SQLTEMPDBLOGDIR: <empty>
SQLUSERDBDIR: <empty>
SQLUSERDBLOGDIR: <empty>
SQMREPORTING: False
TCPENABLED: 0
UIMODE: AutoAdvance
X86: False
Configuration file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\ConfigurationFile.ini
Detailed results:
Feature: Database Engine Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: SQL Client Connectivity SDK
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: SQL Server Replication
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Full-Text Search
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Reporting Services
Status: Failed: see logs for details
MSI status: Passed
Configuration status: Failed: see details below
Configuration error code: 0xDC80C325
Configuration error description: Access is denied
Configuration log: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\Detail.txt
Feature: Management Tools - Basic
Status: Passed
MSI status: Passed
Configuration status: Passed
Feature: Microsoft Sync Framework
Status: Passed
MSI status: Passed
Configuration status: Passed
Rules with failures:
Global rules:
Scenario specific rules:
Rules report file: C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\Log\20140206_091302\SystemConfigurationCheck_Report.htmHello,
If you see error descriptioon it gives access denied so basically it is because of some access issue.I guess You must be using some domin account for installation make sure it is added as local administrator also instead of using NT Authority network
service as SQL server service account use local system account .
Below link would help
http://serverfault.com/questions/212135/access-is-denied-error-installing-sql-server-2008-on-windows-7
You can also browse to setup.exe file and RK on it and select run as administrator
Please mark this reply as the answer or vote as helpful, as appropriate, to make it useful for other readers -
Error in Reporting Facility of KM
Hi All,
I am trying to use the reporting facility of KM.
Under Content Management -> Reports
there are various reporting tools like Approval Maintenance,Link consistency,Resource Statistics, Time based publishing.
I tried all the reporting tools.
<b>The issue is inspite of setting all the necessary parameters, i get no result..</b>
Yet another case is:
For example,in Resource Statistics report
Even after specifying all the parameters like
1. Location
2. Created by , Modified by etc..
I am able to see the found items result as "0".
However the report gives me overall details like
Duration:00:00:01
Found Items : 0
Folder Count:59
File count :109
Overall Size:49 MB
But no items are listed in the Found Items table below.
Kindly help..
Thanks in advance,
venkat.Hi Venkat,
the reports will only report items that are matching the report purpose. For example the link consistency report will only list links that are invalid. The resource statistics report did give you statistics about the documents that were processed. Maybe this report does never list single items.
I propose to use some test data that should match the reports purposes.
Regards
Lars -
Formatted Search on Report Parameter
Hi Experts,
I've 5 reports that I build using Crystal Report 2008 for SAP B1. All of them will ask for parameter input. And for the parameter value input user will be helped by formatted search. What confused me is that when I set formatted search for a report, another reports formatted search value will also get change. For example I have 3 reports, A B and C.
A has 3 parameters: date from, date to and warehouse code
B has 4 parameters: as of date, warehouse code, item code and branch
C has 3 parameters: as of date, item code, division
When I update the formatted search for report B (No query, Warehouse, Item, Branch), then report A and C parameters will also follow those changes. So everytime I run the different report I've to reset the formatted search that will be user input in the report.
Can anyone give me suggestion how to solve this problem so the formatted search attached to each parameter won't change?
Thank you before
Edited by: Willy on Mar 1, 2011 9:31 AMHi Julie,
I am using SAP token. This is the detail. I need an input of card code of customer to see detail report of the code chosen, but the input can also be typed by user. and they can type 0 so they can see detail report of all code. At first I think I can use formatted search but the problem is the query I use in each parameter keep on changing, following the last change I do to another report. (as I explain in my first post). Is there any suggestion?? -
Need to create link to Word Doc in blob column in search results report
I got the Oracle Text boolean search of word documents in a blob column of a table working.
Now I need to be able to create a link in the results report.
I know that Oracle creates a link for each document in the column when you attach a file, I just need to know what the link should be to allow users to open the document in the search results report.
Right now the application is set to do a search in the attached word documents, and in the results window it shows the names of the people who match the search, but it won't allow me to create a link to their resume in the results report.
the name of the table is CONTRACTOR_LIST and the blob column is RESUME.
How would you go about creating a simple link to the word file in the results window?
Here is the code for the query
select score(1) relevance, Name, Resume
from contractor_list
where CONTAINS (resume, :P1_SEARCH, 1) > 0
order by 1 desc
That works, but I can't get it to link to the resume file.
Here is the code I'm using for the link
javascript:popupURL("#RESUMEL#")
This just give me an error page and the the link is
http://server-namer:8080/apex/[datatype]
the error is
Bad Request
The HTTP client sent a request that this server could not understand.
Thanks again!
Edited by: gjones77 on Dec 2, 2008 6:14 AM
Edited by: gjones77 on Dec 2, 2008 7:08 AMIt is within the table I believe (I'm not a DBA or a developer) since I created a BLOB column and then used the file browse feature to allow users to attach a resume to the table in order to be able to perform a search of the attached documents.
I'm just having a hard time pointing the link in the search results report to the document in the blob column.
The information on that page is great if you're trying to create a link to the document on the initial report.
But I created a query using Oracle Text to run a report that does a boolean search of the attached word documents in the table.
When it displays the search results, it doesn't create a link to the document and I can't figure out how to do it.
Here's a link the the instructions I used to create the initial search report with Oracle Text, mind you I only created the index and query, I didn't add in all the link data since they're using documents on websites and I'm using documents in a table.
http://www.oracle.com/technology/products/database/application_express/pdf/apex_text_application_v1.6.pdf
If you can help me with this I'd really appreciate it.
Thanks again.
Greg
Edited by: gjones77 on Dec 2, 2008 8:14 AM -
"The FAST Search backend reported warnings when processing the item." for XLSX
Hi,
i am running an FAST for Sharepoint 2010 for development purpose. I can index DOCX files successfully, but for XLSX files i get the following error:
"The FAST Search backend reported warnings when processing the item. ( Document conversion failed: LoadIFilter() failed: No IFilter registered for the extension '.xlsx' (0x80004005)"
What is wrong here?
Best regards,
Yavuz B.
My Sharepoint and Enterprise 2.0 Blog http://www.bogazci.com |
Microsoft Sharepoint Resources & Blog ListCheck if Microsoft Filter Pack 2.0 and the latest Service Pack for Filter Pack is installed.
Sometimes it´s not installed with the Prerequisities.
Tomas Andersson -
Bug Report Facility on OS X, Downloads Folder Bug?
Hi. I think there should be a reporting system in OS X built-in. They should maybe convert the Report bug on Safari into a suggestions and bugs reporting facility because Safari is usually the most common app that's open all the time. It's inconvenient to do so to go to Apple's suggetions and bugs reporting page in their website.
Also, when you go to the Downloads folder and put it on Arrange by Kind, some of the files on each category are not grouped properly (.dmg for example), they're separated. It also doesn't delete right away when you use Cmd-Delete, you have to do it more than once sometimes.
I hope the next update will have fixed most of the quirks.
Thank you in advance.
Gbu,
AlvinYou can also report bugs via
BugReporter
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter.
Anyone can get a free account at:
<http://developer.apple.com/programs/register/>
And/Or
Mac OS X Feedback<http://www.apple.com/feedback/macosx.html> -
Programmatically download/export search usage reports
Hi all,
With Sharepoint 2013 enterprise (on premise) ... is there a chance to Programmatically download/export search usage reports ( with Powershell for example) ?
These reports are requested
every two weeks by some users who do
not have access to the Web Administrator.
Thanks for your helphttp://social.technet.microsoft.com/Forums/sharepoint/en-US/dc719361-50bc-40ba-bd6b-5035c5a876ca/export-report-from-sharepoint-over-powershell
$wc = New-Object System.Net.WebClient
$wc.Credentials = [System.Net.CredentialCache]::DefaultCredentials
$url = "your url here"
$file = "d:\temp\output_file_location_and_name.csv"
$wc.DownloadFile($url, $file)
Or
http://radutut.wordpress.com/2013/01/27/how-to-get-search-analytics-reports-programmatically-in-sharepoint-2013/
SPSecurity.RunWithElevatedPrivileges(delegate
// You can use SPContext.Current.Site.ID if you have HttpContext
using (var site = new SPSite(siteId))
var context = SPServiceContext.GetContext(site);
var searchProxy = context.GetDefaultProxy(typeof(SearchServiceApplicationProxy)) as SearchServiceApplicationProxy;
var topQueries = searchProxy.GetSearchReport(1, Guid.Empty, Guid.Empty, startDate, false, maxRows);
foreach (var query in topQueries)
//process top search term
http://www.sharepointtalk.net/2014/02/query-sharepoint-search-analytics-using.html -
How can I search for a string like a partial IP address in the global search
When searching for a string like "10.255." the global search finds messages containing "255" or "10" and both.
This happens no matter whether quotation is used or not.
When quotation is used it probably will match on the given order as well, but beeing in the timezone '+0100' the string "10" is always found first (in the email headers...).
Is there a way to tell the global search not to use '.' or any other character as whitespace?When searching for a string like "10.255." the global search finds messages containing "255" or "10" and both.
This happens no matter whether quotation is used or not.
When quotation is used it probably will match on the given order as well, but beeing in the timezone '+0100' the string "10" is always found first (in the email headers...).
Is there a way to tell the global search not to use '.' or any other character as whitespace? -
When I use the search box I would like results to show up in a "NEW" tab but I can't find this setting anywhere... Any solution???
'''browser.search.openintab''' userset boolean True
Also in Google search, upper-right-corner settings
You can always force opening a link into a tab with Ctrl+click or Ctrl+Shift+click
If you want the same from a bookmark make sure to set
: '''browser.tabs.loadBookmarksInBackground''' to same value as you have for
: '''browser.tabs.loadInBackground'''
The last setting is controlled by Tools > Options > Tabs >
:: When I click on a link, switch to it immediately,
which control the difference between Ctrl+click and Ctrl+Shift+click
Items in boldface''' can be set in about:config
* '''More information on configuration variables''' available in [http://kb.mozillazine.org/About:config_entries about:config entries] and for users not familiar with the process there is [http://kb.mozillazine.org/About:config about:config] (How to change).
Reading:
* http://dmcritchie.mvps.org/firefox/keyboard.htm
* http://dmcritchie.mvps.org/firefox/tabs_config.htm -
hi, when i search for an artist like for example Paul weller, I get an error and then i tunes closes. whats happening??
Sorry, but it doesn't help JTANNA.
What is your definition of "more efficiently"? If it's limitation of search results, branded search, and limitation of styling your results then google search is more efficient. Real developers rely on their own developments. For example: how can google search display results from a password-protected site? They can't.
best,
Shocker -
Is there any "Search and Replace" option in Crystal Reports?
Is there any option to search and replace in Crystal Reports. Since i am using a name in many of the formulas in crystal reports. I need to replace with the desired name on the go.
Could anyone help me on this....Search & Replace across formulas is not available in CR XI but is available in CR 2008. Here is an excerpt from the CR 2008 Users Guide:
Searching for formula text
You can use the Find dialog box to carry out a number of different activities:
u2022 Search for text or characters in the Field, Function, or Operator trees.
u2022 Search for text or characters that you want to mark or replace in the
formula, Custom Function, or SQL Expression that you have open.
u2022 Search for text or characters across all SQL Expressions in a report.
u2022 Search for text or characters across all formulas and Custom Functions
in a report.
When you search for text across all formulas, the results appear in a pane
at the bottom of the Formula Workshop. (You can dock the results pane in
other locations). When you click an item in the results pane, Crystal Reports
opens the appropriate formula and highlights the matching text.
Tip: You can open the Formula Workshop to search across all formulas
from the Field Explorer and from the body of a report. To do this, select a
formula field, right-click it, and choose the "Find in Formulas" option. -
Can any one tell me as to how to search for Standard reports for modules like Fi, SD,MM etc ?
Hi
Transaction SE84 may be useful.
Choose Program Library -> Programs
Enter the application component you need (for instance MM) and run.
Also find the list below that helps in searching other programs, functiona modules etc..
Programs
TRDIRE Program attributes (from PROGRAM statement)
VRSD Version administration: Directory table
TRCL ABAP/4 program classes
TDCT Dialog Modules
Repository objects
TADIR Catalog of R/3 Repository objects
TBDIR For Repository Switch: delivered TADIR entries
Function modules
TFDIR Function modules
TFTIT Function module short text
Function groups
TLIBG Person responsible for function class
TADIR Catalog of R/3 Repository objects
TLIBT Function Group Short Texts
I think it will be helpfull to you.
All The Best
Priyanka
Do Reward Points -
Search or Report on the CVE ID using SCUP 2011 and SCCM 2012.
I am in the process of deploying SCCM 2012 on a single server since we have a small environment, as a Primary Site Server. The SQL databases are located on a separate SQL 2008 cluster. I also have SCUP 2011 installed on the SCCM 2012 server.
I am starting to use SCUP as the facilitator to publish 3rd party patches into SCCM and I would like to be able to report on the CVE number that an update has. I know that not all updates have a CVE and that microsoft updates usually publish this in
the MSID article.
My question is if there is anyway to report on this CVE code from within System Center Configuration Manager? If the data is in the xml file in SCUP and I can read it there, does that information get discarded when published to SCCM or does it remain
with the update but hidden in the SQL DB? If it is hidden, I'm sure we can report on it but I would like to know if anyone else is pursuing this or had any other ideas for reporting on the CVE or searching for the CVE in SCCM 2012?
Thanks in advance.
Jason Apt, Microsoft Certified Master | Exchange 2010
My BlogYes, I know this is an old post, but I’m trying to clean them up. Did you solve this problem, if so what was the solution?
To my knowledge nothing was added to R2 that would give you the CVE. I think this can be done as a custom solution but it would take a while to do the R&D and write the solution.
Garth Jones | My blogs: Enhansoft and
Old Blog site | Twitter:
@GarthMJ
Maybe you are looking for
-
How do I configure ISP native IPv6 connectivity?
Hi! I'm a network engineer for SECOM, an ISP in Southeastern Colorado. We will be making native IPv6 connectivity available to residential subscribers soon, and I've been tasked with verifying support for our IPv6 platform on home router products. I
-
What's the safest way to reload system software
What's the safest method to reload system software on an intel iMac? My wife's iMac has been behaving erratically. I have run hardware and virus scans and found no issues. Virus software is Saphos and up to date. Problems began after a brief (5 seco
-
Hi there, I am still learning to program in LabView, and I need to create a program that will acquire data from 2 cameras and a spectrophotometer. 1. Using a simple GRAB VI i am not being able to save a new image, just overwrite existing ones. Why i
-
Is it possible to pass the Interactive Form on dynamic?
Hi, Is it possible to pass the Interactive Form on dynamic? In webdynpro I am handling the header part that will be common for the entire input screen, based on the application name I want to call the different interactive forms. I have seen in templ
-
CC minimized windows popping up
This is an issue I have dealt with the entire time while using CS6. Adobe indicated to me they were working on the problem so I just KNEW it would be fixed for CC. But, apparently not. Excerpts from my previous post: I work in separate windows when u