Searching in sxmb_moni for business data

Hello,
it is possible searching for business data in sxmb_moni for example a order-No. The reason is that a customer want know the time the order is executing or this happened without an error or trying to send the order again. Normally only with the message searching is possible?
Thanks in advance,
Frank

hi Frank,
it will/should be with SP14
with the use of trex
till then this is not possible
Regards,
michal
Message was edited by: Michal Krawczyk

Similar Messages

  • Searching in Skype for Business (Lync) and GAL and Outlook

    Post transferred to the Features: Using Skype in Your Business message board.

    Hi,
    Base on my knowledge, it can be the issue of driver. Please try to uninstall the default Sound Card, VGA Device/Video Card, Graphic Card. Then rescan the system to reinstall these driver, and rebooted.
    Then test the issue again.
    Best Regards,
    Eason Huang
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
    Eason Huang
    TechNet Community Support

  • Script to search for special data in folder

    Hi, 
    I use several folders, which have several data called .txt at the end. Some of the folder have no .txt datas and some folder have one or two of .txt datas. 
    I want to write a script which makes it possible for me to search for the .txt datas in the folders and let me know the Name of the data. 
    At the moment, I have no idea how to search in folders for special data. 
    Maybe somebody of you know how I could programme this code?
    Thank you very much for your help. 
    Best regards, 
    Mosquito

    Hello Mosquito,
    There is no Script required to do what you are trying to do based on my understanding of your explanation.
    You just need to follow these two steps:
    1. Add ALL the directories you wish to search for you *.TXT files to the DataFinder Search Areas, be selecting a grey folder in the NAVIGATOR, right-clicking the folder and then selecting "Add Search Area ...". This will ass the grey folder to the "Search Areas" = Yellow folders on top the the tree view in the "My DataFinder" view of the NAVIGATOR.
    2. In the NAVIGATOR panel, find the text box on top of the file system hierarchy view, and type "*.txt" into the <Enter search text> field as shown in the screen shot below. Press the "Search" button to the right of the text field, and you will get a list of all *.txt files that are contained within your yellow search area directories.
    That's it. No scripting required ...
    Let me know if that helps.
         Otmar
    Otmar D. Foehner
    Business Development Manager
    DIAdem and Test Data Management
    National Instruments
    Austin, TX - USA
    "For an optimist the glass is half full, for a pessimist it's half empty, and for an engineer is twice bigger than necessary."

  • Feb/Mar 2015 Update: OneDrive for Business Error "Incompatible Office products are installed on your machine."

    After Installing the Feb 2015 Updates for Office 2013 ProPlus via ClicktoRun, OneDrive no longer opens with the error message:
    "Sorry, we can’t perform this action. Incompatible Office products are installed on your machine. If you have an administrator, please contact them for help. "
    The eventviewer info is:
    - <System>
      <Provider Name="Microsoft Office 15 Alerts" />
      <EventID Qualifiers="0">300</EventID>
      <Level>4</Level>
      <Task>0</Task>
      <Keywords>0x80000000000000</Keywords>
      <TimeCreated SystemTime="2015-02-11T17:08:53.000000000Z" />
      <EventRecordID>605</EventRecordID>
      <Channel>OAlerts</Channel>
      <Computer>BP-W-7DB824.raydon.com</Computer>
      <Security />
      </System>
    - <EventData>
      <Data>Microsoft OneDrive for Business</Data>
      <Data>Sorry, we can’t perform this action. Incompatible Office products are installed on your machine. If you have an administrator, please contact them for help.</Data>
      <Data>702089</Data>
      <Data>15.0.4693.1000</Data>
      <Data />
      <Data />
      </EventData>
      </Event>
    I have other office products on here including:
    SharePoint Designer 2010
    SharePoint Designer 2013
    Microsoft PowerBI Designer Preview
    and this is installed on Win 8.1 Enterprise
    Kind of stumped what is causing this... I see KB2920798  mentions this error message is now added when cant open a document due to a mix of click-to-run and MSI install for office.  I only have click to run for Office 2013 and the MSIs are only for
    addons in excel (power query) and the additional Microsoft Software...
    Anyone have ideas what is causing this and how to resolve?
    I just finished applying March 2015 C2R updated on Office and the same issue recurred.  This time I simply rebooted and it resolved.  My best guess is it has something to do with a locked file that can't be updated but the Office Update installer
    doesn't prompt to reboot.

    I have the same problem. But I have Czech versions of the Word and OneDrive for Business ("OneDrive pro firmy").
    I do not have the SharePoint Designer nor update KB2020798. I received KB2920746
    on 11th February (plus other updates for Office, but any other for OneDrive for Business). Anyway,
    uninstall of the KB2920746 doesn't help.
    The error in Czech:
    Microsoft Word
    Je nám líto, ale tuhle akci nemůžeme provést. Na počítači máte nainstalované nekompatibilní produkty Office. Pokud máte správce, požádejte ho o pomoc.
    P1: 702089
    P2: 15.0.4693.1000
    P3: 
    P4: 
    It helped me to unistall OneDrive for Business (Onedrive pro firmy) - displeasing solution,
    right?;-(

  • An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229

     Recently i upgraded my SharePoint server 2013 to SP1, after the upgrade i received following message in manage database Status page " Databases running in compatibility range, upgrade recommended" 
    for Business Data Connectivity Database. Then i ran Sharepoint Configuration wizard, which fixed that error on that page but i am getting a error message while accessing BDCApplication page in manage service applications pagein central admin"
    An internal database error occurred in the Business Data Connectivity Shared Service. SQL Error Number : 229
    Sys Log :
    The BDC Service application failed due to a SQL Exception: SQLServer host WSQLD05\DV. The error returned was: 'The EXECUTE permission was denied on the object 'proc_ar_GetAdministrationMetadataCatalogByPartitionId', database 'sp_BusinessDataConnectivity_DV13',
    schema 'dbo'.'
    I checked the Db role of the service app pool account, it has SPDataAccess permission over the Database. i cant recreate another application without knowing the root cause. I hope i can get better option to troubleshoot the issue.
    Thank you

    As per the error message, you can at least grant the BDC service application pool account the EXECUTE perimssions on the sp_BusinessDataConnectivity_DV13 database
    Edwin Sarmiento SQL Server MVP | Microsoft Certified Master
    Blog |
    Twitter | LinkedIn
    SQL Server High Availability and Disaster Recover Deep Dive Course

  • Short dump "Time limit exceeded" when searching for Business Transactions

    Hello Experts,
    We migrated from SAP CRM 5.2 to SAP CRM 7.0. After migration, our business transaction search (quotation, sales order, service order, contract etc) ends with the short dump "Time limit exceeded" in class CL_CRM_REPORT_ACC_DYNAMIC, method DATABASE_ACCESS. The select query is triggered from line 5 of this method.
    Number of Records:
    CRMD_ORDERADM_H: 5,115,675
    CRMD_ORDER_INDEX: 74,615,914
    We have done these so far, but the performance is still either poor or times out.
    1. DB team checked the ORACLE parameters and confirmed they are fine. They also checked the health of indices in table CRMD_ORDER_INDEX and indices are healthy
    2. Created additional indices on CRMD_ORDERADM_H and CRMD_ORDER_INDEX. After the creation of indices, some of the searches(without any criteria) work. But it takes more than a minute to fetch 1 or 2 records
    3. An ST05 trace confirmed that the selection on CRMD_ORDER_INDEX takes the most time. It takes about 103 seconds to fetch 2 records (max hits + 1)
    4. If we specify search parameters, say for example a date or status, then again we get a short dump with the message "Time limit exceeded".
    5. Observed that only if a matching index is available for the WHERE clause, the results are returned (albeit slowly). In the absence of an index, we get the dump.
    6. Searched for notes and there are no notes that could help us.
    Any idea what is causing this issue and what we can do to resolve this?
    Regards,
    Bala

    Hi Michael,
    Thanks. Yes we considered the note 1527039. None of the three scenarios mentioned in the note helped us. But we ran CRM_INDEX_REBUILD to check if the table CRMD_ORDER_INDEX had a problem. That did not help us either.
    The business users told us that they mostly search using the date fields or Object ID. We did not have any problem with search by Object ID. So we created additional indices to support search using the date fields.
    Regards,
    Bala

  • Error while searching for Business Partner in Web UI

    Hi,
    While searching for the Business Partner in Web UI either by First Name, last name or Account ID, we are getting following error:
    Cannot display view BSPWD_BASICS/ErrorView2 of Component CRM_UI_Frame
    An exception has occured
    Exception class: CX_BOL_EXCEPTION - Access previously deleted Entity
    Method: CL_CRM_BOL_ENTITY=>GET_ROOT
    Source Text Row: 12
    When the business partner blind search is given (i.e. by entering *), all the business partners get displayed without any problem.
    Also, this problem occurs only for some business partners and NOT ALL.
    This problem, has also been observed sometimes when an IBase entry is created in the background.
    We are not quite sure whether notes, 135814 & 1515327 will help us in this regard, as the root cause is still unknown.
    Could anyone suggest possible causes and solution for the same. We are on CRM 7, using the standard business role.
    Thank you in advance.
    Regards,
    Chhaya

    Hi Shiromani,
    We have observed that this problem is peculiar with the data records attached to IBase ONLY. It means, if we process them further e.g. create a contract for the Business Partner after attaching the IBase, this problem doesnt occur. Then we are able to search the BP without any error.
    In short, when an IBase is created for a BP, and if a search is given for such BP, the error given in the first thread occurs, But when an IBase is created and immediately after that a contract is attached to the BP, and if a search is given for such BP, then there is no error.
    We are still further investigating the root cause. But any suggestion/inputs are welcome.
    Thank you.
    Regards,
    Chhaya

  • CRM - Search for Business Transactions Screen

    Hi,
    When I go to the CRM - Search for Business Transactions Screen; in the second tab 'Search', when I click the Period dropdown it starts with a date in 1899 as default.
    Can anyone advise me on how to change this?
    Regards,
    Ravi.

    Hi Ravindranath
    Check if your system time zone settings are correct:
    IMG>SAP Web Application Server>General Settings>Time Zones>Maintain System Settings
    IMG>SAP Web Application Server>General Settings>Time Zones>Maintain Time Zones
    Hope this helps
    Regards
    Pragasen

  • Activate Change pointers for TREX classification search for Business Objects

    Hey all...
    Does anyone out here has any idea on how to activate the change pointers for TREX classification search for business objects: - for me I am specifically doing it for Materials and Customers.
    Okay, let me explain the issue: -
    For TREX search, we need to schedule a background job for Delta Indexing. But Alas! Delta indexing does not capture the changes to Classification data of the business object.
    For this we activated the change documents for the particular class in the customizing. But to my surprise, change documents and change pointers for TREX are entrirely different.
    How do I know:
    Change ID of CDHDR does not correspond to Change pointer in table COM_SE_CPOINTER. Now by activating the change documents I am getting entry in CDHDR and CDPOS but the mentioned change pointer table still does not get the entry.
    I searched for BTEs and I got the below: -
    Now to me the very obvious one was 4003, but it is not called while changing the classification data for materials. Ofcourse I activated the Product and the function module.
    and now I am stuck!!
    Any pointers for the Change pointers would be really appreciated??
    Please share your knowledge even if you don't know the exact answer . I am new to TREX so possibly vague conversations could provide me a hint .
    Thanks,
    Best Regards,
    Shreya

    Hi Guys,
    This issue was solved by implementing the BTE 4005 (OPEN_FI_PERFORM_00004005_E). This particular event is triggered in the update task for saving changes to business object. So In my function module (corresponding to BTE), I have explicitly called the method to write an entry in COM_SE_CPOINTER, because we just need the reference of business object for which classification data is changed.
    Please refer the below code for more clarity.
    BTE position: -
    method called in FM to write change pointer.
    Thanks anyways, for all the responses.
    Cheers,
    Shreya

  • Render html in the Business Data web part (used for the BCS profile page)

    I am searching and indexing a webservice and pulling in external content, through SharePoint's BCS. I have used SharePoint Designer to make the connection and its a read only connection, we are not trying to write back to the external data source. The problem
    I have is that some of the columns are rendering the HTML as a string, with all of the HTML tags. For example, a column will render like this:
    &lt;p&gt; Onboarding, Recruiting &amp;amp; Talent Acquisition general information&lt;/p&gt;
    The profile page uses the business data web part and will accept custom XSL and I have modified the column that is rendering the html from:
    <xsl:value-of select="@u_cause" /> 
    to
    <xsl:value-of disable-output-escaping="yes" select="@u_cause" /> 
    The problem is that it does not make a difference the column will still render the HTML. Is there any other way to make the column render HTML?
    Joe Garcia

    Hi,
    According to your description, my understanding is that you want to render column value as the HTML format in the xslt list view.
    I suggest you can set the “disable-output-escaping” attribute like below, it will render as html:
    <xsl:value-of select="@MyColumn" disable-output-escaping="yes"/>
    Here are some detailed articles for your reference:
    http://sharepoint.stackexchange.com/questions/16089/unescape-html-from-list-column
    http://doitwithsharepoint.blogspot.com/2011/06/sharepoint-list-forms-display-html.html
    Thanks
    Best Regards
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Jerry Guo
    TechNet Community Support

  • Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked.

    Whenever I go to iTunes with my iPod 5th generation 32 gb iPod Touch, running iOS 8.0.2, It tells me that the "Other" category is using up 14.59 gb of data. I have no clue why it says this and I have searched the internet for fixes and none worked. I have tried on a windows and a mac and noticed no change. I have tried restoring to a backup but that didn't help. I haven't had time to do a full restore but I will try if the problem persists.

    An "other" larger than about 1 1/2 GB indicates corrupted files.
    What is the Other on my iPhone and How to Remove It
    What is "Other" and What Can I Do About It?
    Next, usually restoring from backup eliminated the corrupted files. However, sometimes restoring to factory settings/new iPod is required.
    To restore from backup see:
    iOS: How to back up
    To restore to factory settings/new iPod see:
    iTunes: Restoring iOS software

  • Search help for business partner ID in segmentation applet

    Hello,
    In CRM 2007 I'm using the segmentation toll. When creating filters for Business Partner ID criterium I'm using a search help functionality to find the desired records. However search help for business partners used in this area is very different from the search help used in any other parts of WEB UI (it is restricted to only few fields, that are not enough for our requirements).
    Segmentation applet is written in Java but the search help looks like normal WEB UI screen. I wonder if any of you could help me with replacing this serach help called by segmentation applet (java application) with a standard search help for business partners (BP_HEAD_SEARCH)?
    Kind reagrds
    Marek

    Hello there,
    I think the requirement/question is not very clear in your post.
    However, the segment Java applet calls a CRM class which has related code and methods.
    Class:  CL_CRM_MKTTG_SEGAP_COM
    Package: CRM_MKTTG_SEG_APPLET.
    Please explain the problem in detail.
    Regards,
    Vinamra.

  • "Searching for movie data in file [filename]" and iDVD hangs.

    I have a project I saved and I want to open and make a change to. iDVD loads the project and displays the title. When I click to edit one of the scene selection menus, it goes off "searching for movie data" and hangs until I kill it.
    Anyone have any ideas how to fix this? I really don't want to have to re-do my project.
    Thanks!
    Scott

    This frequently helps solve some problems. Quit iDVD. Search for the file named com.apple.iDVD.plist and trash it. (A new one will be created next launch of iDVD.) Or look in: User/Library/Preferences. This may solve project loading errors too. Restart and use Disk Utility to Repair Permissions.
    You'll need to reset some Preferences.

  • Error in Installing the Business Content for 2LIS_06_INV data source

    Hi Experts,
    We are trying to install the Business content for 2lis_06_inv. When we replicate the datasource, we are not seeing it in 3.x version. It is only vailable in 7 version. There is no transformation available in Business content for this data source. Please let me know how we need to proceed with this installation. Should we install the 7.0 flow or 3.x flow? Please provide th details if you have implemented th same in your system. Thanks is advance.
    Regards,
    Kavitha Jagannath

    Hi,
    Follow bellow steps:
    1. Goto RSA1.
    2. Select the BI content.
    3. Select the Grouping as' In Dataflow before and after'
    Then,you can get the data flow which are haveing the DS/TR/Data targets.
    4. Select the Install by setting the 'Install in background'.
    Regards.

  • Can't open MOV files in FCP: "Searching for movie data in file..."

    I know this has been posted before, but none of them seem to match up to what I'm all of a sudden dealing with. I have 4 MOV files that I'm converting to WMV. Movie 1 & 2 exported fine. Now, however, any time I try to open another MOV file, I get an error that it's "Searching for movie data in file..." and the file name is ALWAYS the same. The weird thing is, the file it's looking for is none of the 4 movies I'm working with. So how did the first two work and this pop out of nowhere??
    I have cleared out the render cache. Dumped all the cache and prefs files I can find, etc. Restarted the machine. Started FCP with the Option key held down.
    I've searched everywhere, but people usually seem to come across this error while opening FCP (I'm running 6.0.6). This only happens when I open a MOV file (oddly, I can open WMV files in FCP without issue).
    HELP!

    So, I open the movies in QT and the EXACT same thing is happening. So it appears the guy who created the videos did something when he was making them (probably made a reference files along the way). I'm having him re-export the MOV files.
    So, it's not a FCP issue.....

Maybe you are looking for