Searching in url box
When i type in the url box it pops up with search options fpr bing. i dont have the bing tool bar installed and want to change it back where it shows urls. This just started happening with in the last few days and i havent loaded any add ons
Hello,
'''Try Firefox Safe Mode''' to see if the problem goes away. Safe Mode is a troubleshooting mode, which disables most add-ons.
''(If you're not using it, switch to the Default theme.)''
* You can open Firefox 4.0+ in Safe Mode by holding the '''Shift''' key when you open the Firefox desktop or Start menu shortcut.
* Or open the Help menu and click on the '''Restart with Add-ons Disabled...''' menu item while Firefox is running.
''Once you get the pop-up, just select "'Start in Safe Mode"''
'''''If the issue is not present in Firefox Safe Mode''''', your problem is probably caused by an extension, and you need to figure out which one. Please follow the [[Troubleshooting extensions and themes]] article for that.
''To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before opening Firefox for normal use again.''
''When you figure out what's causing your issues, please let us know. It might help other users who have the same problem.''
Thank you.
Similar Messages
-
When i type a search term in the URL box, the result is returned on an AOL Search page; I want a Google search page - help....
In order to better assist you with your issue please provide us with a screenshot. If you need help to create a screenshot, please see [[How do I create a screenshot of my problem?]]
Once you've done this, attach the saved screenshot file to your forum post by clicking the '''Browse...''' button below the ''Post your reply'' box. This will help us to visualize the problem.
Thank you! -
Can i search through the URL box?
I know you can on Firefox, I'm not sure if there's a way to do it in Safari.
I want to be able to type in "apple" in the URL box and then have that go to google or directly to apple.com instead of going in the google search box...
I know, I'm strange, but is there a way to do that? I've already checked the preferences.Hello suzy:
If you type apple in the URL box, you should get several options. One is apple.com. If I type Firefox in the box, it takes me to the Mozilla web site.
Barry -
I set a theme on igoogle - but it seems to now be embedded in my firefox as it is behind the url box, behind the bookmark tab bar and at the bottom of the page. How do I get rid of it. I can still change themes but they stay on the google page as they should. this has nothing to do with my screen saver and my desktop screens - they are different and ok - seems to be stuck in Firefox particularly.
== This happened ==
Every time Firefox opened
== a month ago when I changed themes on google@<b>gobby</b>
Please do not use existing threads to ask a question, but [/questions/new start a new thread] instead.
Then you also can provide troubleshooting information like your operating system and installed plugins (about:plugins), and extensions (Tools > Add-ons) and we will be better able to help you.<br />
See [[Deleting bookmarks]] -
Customize no longer works for me in FF 29. It just brings up "about:customizing" in the URL box
I like the new interface in FF29, but my back and forward arrows no longer show in the toolbar. No problem, I thought. I'll just correct the lost customization. But when I choose customize, I don't get the usual customize menu. "about:customizing" is simply inserted in the URL box.
Have you tried it in "Safe Mode" - F10 > Help > Restart with addons disabled?
When I enter "about:customizing" it takes me to the same customising view as does using right-mouseclick on a non-active part of the main toolbar.
Another gotcha might be that at the bottom-left there is a drop down list where menus can have their visibility set. It's possible for some buttons to be hidden because these menus are set "off". Just for when you do find your customise page ... -
Search the Web box to the right of my address bar disappeared, how do I get it back?
The "Search the Web box to the right of my address bar disappeared. How do I get it back?
It is gone in the new version of Safari and the Safari in Mountain Lion. You cannot get it back.
Search is now done inside the adress bar, so you did not lose the search functionally. The location has changed. -
The url of the website that I'm visiting used to show in the url box when I opened from a shortcut or email. But not it's not there unless I refresh the page. I've looked and haven't found a way to set this so that it works like it used to. I liked being able to click in the address bar and copy the link, or even to look there and see where I am.
I'm unable to check it in safe mode because the only time it happens is when I click a link and have not firefox open. For example if I would click a link in my email right now, it would open in another tab and show the address of the link I clicked. But if I didn't not have this window open and clicked alink, it would open a new window and I wouldn't be able to see the url.
Here's a screen shot.
[http://chibitude.com/gallery/albums/userpics/10001/firefoxSSForAddressProblem.jpg firefoxSSForAddressProblem.jpg] -
Hello there,
I know that in the search center you can add search verticals. Then you can configure the search box so it has a drop down menu so you can specify the result source you want to search.
But my question is about the 'search this site' box which appears on all subsites, so not the one in the search center. Is it possible to add the same dropdown menu to this box as in the search center?
Thanks in advance!Hi,
According to your post, my understanding is that you wanted to add a dropdown menu to the search box.
You need to look at the Search Settings page that is located under the Site Collection Administration of the Site Settings.
Here are some similar blogs for your reference:
SharePoint 2013 Search Settings and Search drop down menu
Customizing Search Navigation on a SharePoint 2013 Publishing Site
Best Regards,
Linda Li
Linda Li
TechNet Community Support -
Hi there,
I have updated the domain name for a client's website and followed the proceedure from other discussions I saw on the subject. It works fine to export and publish using the udated domain name, but the old name still shows up in the URL box on the live site. How do I update that so the new domain name shows up after the site is opened?
Thank you so much!
MaryHi Mary,
Your domain agsgaming.com (managed by NAMECHEAP.COM) has a 302 Redirect setup to forward to http://www.americangamingsystems.com.
You would need to contact your domain registrar to fix this redirect for you or help you fix that.
Cheers,
Vikas -
I accidently deleted my url box at the top of safari. I believe I did this with the command key. Can anyone help me get it back? Thank you in advance!
Right click (cntl-click) on the top of the bar and select "customize toolbar". Drag the default set back in.
Regards,
Captfred -
I accidentally trashed the url box in safari and deleted it in trash! how do I get it back?
Right click on the toolbar and select Customize Toolbar, you can put it (and other things) back from the dialog box that you'll get
-
How to implement alphabetic search in combo box
Hi all,
how to implement alphabetic search in combo box through coding.
Thanks for any repliesIm not sure if I undestand correctly, but example is
sCFL_ID = oCFLEvento.ChooseFromListUID
Dim oCFL As SAPbouiCOM.ChooseFromList
oCFL = oFormKontrolaMZ.ChooseFromLists.Item(sCFL_ID)
If oCFLEvento.BeforeAction = False Then
Dim oDataTable As SAPbouiCOM.DataTable
oDataTable = oCFLEvento.SelectedObjects
val = oDataTable.GetValue(1, 0)
oForm.DataSources.UserDataSources.Item("EditDS").ValueEx = val
and then load from datasource to matrix.
hope it helps
Petr -
TOC problem; lost Search and Keyword boxes
I inherited a Robohelp X5 project that was originally started
by a person very familiar with these types of programs, then
ultimately messed up by someone who knew nothing about them or the
content. I spent most of my time re-writing and updating the
content using X5, then upgraded to 7 this morning. I have learned
quite a bit about the program, not obviously not enough. I'm sure
these are things I've messed up, because they worked before; but I
don't know what I did or how to fix it...
First, the TOC is built, with books and pages are in the
order I want. The books are linked to a page - presumably, so that
when a user clicks on the book, it defaults a particular page, and
from there they can move to other pages in the section. However,
when I view the results, you have to click on the book, then click
on the individual page to get the page to open.
Next, I have 'lost' the Search boxes for the Index and
Keyword searches. When I look at the skin, they appear there, but
when I view the project, they aren't - the index and keyword lists
appear instead of the boxes.
If anyone can give me some direction on what I need to do,
I'd really appreciate it.Thanks so much for trying to help me - I apologize in advance
for being suce a novice, and I promise I'll try to learn more about
this program and not bother you guys so much in the future. Right
now I'm just in a bind with needing to get the file posted.
I right-clicked on each of the books, went to Properties, and
confirmed that the Book with Link box is checked, near the bottom
of the window, in the Link to: box is the page that I want the book
to open with. However, when I view the project, that isn't what
happens. For example: I have a Book named Getting Started, under it
are several pages related to initial set up of the software, one of
which is named Getting Started. The Book is linked to the page; but
when I open the project in View, I click on Getting Started and it
expands to show the pages; I have to actually click on the Getting
Started page to open it. Before, whenever I clicked on the Getting
Started Book, the Getting Started Page opened to reveal the
contents of the Book. On the Book Properties window, there isn't
anything in the Available Variables box, and if I go to the
Advanced tab, the Frame reads Default (none) - should the Book or
the Page be designated as a Parent Frame?
With regard to losing the Search and Keywords boxes - I have
an Index full of words; went through yesterday and cleaned it all
up, then generated Webhelp. When I open it to View, the project
opens to the TOC, which is good, but the Search button that usually
appears at the top of the Help screen is not there. Then, when I
click on either the Index or Search tabs, what I see is the
alphabet where the Search box should be, with a list of all of the
index words below. If I open the Skin that was used on the project
and View it, the Search boxes appear there.
I looked at the website that Peter directed me to, but I
don't really see anything there that addresses either of these
issues. Under the Tools menu I did locate an Update DHTML Effects
in Topic; but when I click on it, it returns a message that tells
me that after the conversion the topics cannot be opened by
previous versions of RoboHelp HTML. I've answered No to convert all
of the topics, because I'm not sure that's what I should do. -
<blockquote>Locking thread.<br>
Please continue here: [/questions/786744]</blockquote><br>
Hi again,
There's no bar that says file, tools, view, (other?) OR URL box, reload button or back/forward buttons, so I can't even do some of the things people are suggesting, like run in safe mode. This requires using the file button. The suggestions I'm getting all require using the bar that I don't have. I also uninstalled and reinstalled firefox to see if it would change, but it didn't. I've still got the same problem.
Would LOVE to take care of this soon. It's causing me to put some projects on hold. AnnetteSee your original question: https://support.mozilla.com/en-US/questions/786744#answer-142144
-
Like i stated i'm having a problem with every time i type into a search bar or box of any kind including log ins and such the box turns blue, and in many cases makes it so i can not read what i am typing. Tried same website on IE and they worked fine so i assume it's firefox, is there anything i can do about it
For me, the google search bar turns blue once I've typed in a search term, but then want to click on it again to change or add something. The entire bar turns blue. I can still type, but it's hidden. Then when I click Search, it does bring up my search results and now the terms I've written are showing in the search bar, with no blue.
The only way to get out of it when the blue is there, is to reload the page.
Maybe you are looking for
-
Creating form - want to change font style and size in more than one field at a time HOW??
creating form - want to adjust font style and size in more than one field at a time - HOW??
-
Can not access to OCA User Pages
Hello, I am following the OBE for External Authentication Pluggin Configuration, and The guide said i should go url: https://host.domain:4400/oca/user I changed according the host and domain for the infrastructure server, but when I try the resul is
-
How do you burn photos to DVD from iPhoto?
How do you burn DVDs of photos in iPhoto?
-
Calling function in another button?
I have 2 Movie Clips which create a menu system. When you hover the mouse over the 2nd button (will be adding more as soon as I figure this road block out) it drops down a menu. [Home][Forums] In the movie clip of "Forums", I created 2 labels. 1 is f
-
XI content for SAP SRM SERVER 6.0
Hi All, I want to implement SRM-MDM CATALOG Business scenario, but i am not getting the XI content for Software Component Version <b>SAP SRM SERVER 6.0</b>. Can anybody tell me from where to get the XI content for Software Component Version <b>SAP