Searching Message ID in XI using the IDOC number produced in S1P

Hi Everyone,
I'm a sap XI newbee and i have a question.
The scenario is like this, We have a message ID (PO) that passes thru XI from a 3PLP(3rd party system) which eventually produces an IDOC when it reaches S1P(R/3).
Message flow: 3PLP - XI - S1P.
So in S1P(R/3)'s perspective, the IDOC is INBOUND and its supposed to display the message ID from XI in the DETAILS TAB (tCode:WE02) unfortunately it did not.
So how would I be able to find the message ID in XI using the IDOC produced in S1P.
I hope you get my point.
PS: tcode IDX5 wont work since the IDOC was only produced as soon as it reaches S1P(R/3).
Thank you so much,
XI Monitor

You have to search for the IDOC from IDX5 in your XI system...
Also please check the following OSS note : Note 1083694 - IDoc adapter: IDX5 and IDoc tracking
No object relationship is written in step 2.
No object relationship is displayed in the IDoc monitor (transaction WE02) in the receiver system.
Note that object relationships are written for logical systems only (partner type = "LS").
For more information, see Note 428344.
In transaction WENOLINKS, check whether the administrator has deactivated the object relationships.
If everything is maintained, you should see the Sender idoc number(PI) in BD87...
One of the roundabout ways till you fix the issues is to get the timestamp when IDOC was created and go to SXMB_MONI or IDX5 in PI for that timestamp to get the message id

Similar Messages

How to use the Idoc number.(generated by prgram) and ALE

Hi All
I have a problem to use Idocs. I go thru the following steps but can not able to see the final output.
1.Create Segment ( WE31)
2.Create Idoc Type ( WE30 )
3.Create Message Type ( WE81 )
4.Assign Idoc Type to Message Type ( WE82 )
5.Make a report which gives us Idoc number.
Now my problem is where this Idoc number can we used .and how to relate this with ALE.
Regards
Manoj

Hi Manoj,
Use transaction code we02 or we05 to get the idoc no.
The table used are
EDIDC - Control record
EDID4 - Data record
EDIDS - Status record
Regards
Arun

Loaded Outlook mobile app and now I can't send emails through Mail ("Unable to verify account information" error message). Can't use the Authenticator number, either. Help!

I installed the Outlook mobile app on my iPhone using my Hotmail email address and the authenticator code. It works, but I can no longer send emails from Mail. I have not forgotten the password, so I don't know why I am unable to send messages from my mail email account (linked to Hotmail) in Mail. Should I delete the Outlook mobile app? Please help! Thanks.

I installed the Outlook mobile app on my iPhone using my Hotmail email address and the authenticator code. It works, but I can no longer send emails from Mail. I have not forgotten the password, so I don't know why I am unable to send messages from my mail email account (linked to Hotmail) in Mail. Should I delete the Outlook mobile app? Please help! Thanks.

I tried dowloading Skype yesterday and my Safari browser crashed. It gives the message "Safari quit while using the librooksbas.dylib plug-in. I trashed Skype but still have the browser problem. I also tried logging in under guest, and no Safari.

I tried dowloading Skype yesterday and my Safari browser crashed. It gives the message "Safari quit while using the librooksbas.dylib plug-in. I trashed Skype but still have the browser problem. I also tried logging in under guest, and still
no Safari.

Julie --
Backing up QuickTime's advice --
Unless your bank's website is insecure, you're fine. Go up to the Safari "Search" bar and type in Rapport. You'll be amazed. It may "work" on PCs, but definitely not Macs. And it's not needed for Macs.

Problems migrating data via LSMW using the IDoc method

Hello everybody,
I got a very strange problem migrating data via the LSMW. I tried to map legacy data using the IDoc mapping method. I'm using the message type 'CRMXIF_PARTNER_SAVE_M ' and the basic IDoc type 'CRMXIF_PARTNER_SAVE_M01'.
I can read the import data and convert it to IDoc structure as well as generate the IDoc. When I start processing the IDoc afterwards I get always the same error messages which I don't understand...
The errors are:
1) Error status 'A ' calling validation service (Status 51)
2) Validation error occurred: Module CRM_BUPA_MAIN_VAL , BDoc type BUPA_MAIN (Status 51)
3) Error_Time Dependency_Addresses CHECK_TABLE_MISSING (Status 51)
4) Internal error when calling operation module BUA_CHECK_ADDRESS_VALIDITY_ALL : Check table missing (Status 51)
5) Address moves ignored in the case of time-independent systems (Status 51)
6) Partner data processed with key PartnerGUID 4BF67ADE9B9923BEE10000000A3500DB (Status 51)
7) Partner (4BF67ADE9B9923BEE10000000A3500DB ): the following errors occurred (Status 51)
I tried to import the following data:
external ID
Name1
Name2
Address data
Telephone data
Fax data
Website data
Can anybody tell me where those errors come from and how I can fix them. Would be great if somebody could help me!
Thank you and best regards,
Markus

so apparently my issue with this was setting the time zone in the Address to the time zone of the user doing the conversion. You can find the time zone in SU01.
Also you can create a BP in the WebUI then check t-code SMW01 and it will help you on passing the values to CRMXIF_PARTNER_SAVE
Edited by: Akeem Lockett on Jul 8, 2010 7:44 AM

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

With my i phone 4 , the Push notifications doesn't work for apps like (fb viber , whatsapp etc ) it only works for the official apps like message even when im using the phone, has this probleme with the iOs 6.0.1 and also with the iOs 6.1

This isn't an issue. Notice the screen prior to the one that shows usage has an iCloud section and a Manage Storage button. For this button to activate ios needs to download a few kb from icloud. Switching back to this screen forces ios to download those few kb.

How do you take off reseiving messages on multiple devices using the same apple account

How do you take off reseiving messages on multiple devices using the same apple account?

Go to Settings>Messages>Send and Receive on all but one device and add a unique email address on each device and delete the commone Apple ID email device
If there is also an iPhone with iOS 6 associated with the Apple ID, uncheck the phone number on all but the phone.

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried ch

I get a error message "To charge faster, use the cable and device that were provided with this phone" when charging my Samsung Galaxy note 3. I took it to a store last week and they said it has something to do with the last software update. They tried charging it at the store and got the same message. I was given another phone, I still get the same error with the new phone.

Wowuor,
Thank you so much for reaching to us today. I want to make sure that we get the device charging the correct way. There is no physical or liquid damage to the phone or to the power cord correct? Did this error just start to appear as of last week? Please keep us posted.
KevinR_VZW
Follow us on Twitter @VZWSupport

Search help for Web Dynpro using the SAP-search help

Hi,
Im trying to create a generic search help for Web Dynpro using the SAP-search help. It should working so, that I construct a Web Dynpro-component, that gets the data of the search help from the SAP-system, interpreted it and creates the ui-elements and the needed context generic.
The mapping between the Input field of the customerview and the right search help is to be made with an xml-file, which contains the information: name of the view, the input field, the search-help-name and the name of the field that will be returned.
The xml-file is reading from a helper-class. That helper-class contains any information, witch need the search help-component as well as the customer-component.
The initialization takes place in the method wdDoModify of the customer. The call of the search help from the customer should be implement with an Action, witch is bound to a Button(create dynamic in the helper-class behind the input field).
In a second foot should be create a plugin for eclipse, witch insert the used files (search help component, helper class, ) in the project. In addition it should create the call in the customer generic.
It would be great if someone can give me a feedback!

Hi Mike,
The BlanketAgreement.exe is a reference to the executable that will be created when you compile the solution you created in Part II - Part III. I think there is a mistake in the tutorial because it asks you to name the project 'Blanket' which means that by default the executable will be called Blanket.exe and not BlanketAgreement.exe. The tutorial also misses the step asking you to compile the Blanket project before you go on to create an installer. You should compile your Blanket project in Release mode before creating an installer. By compiling the project you'll get a Blanket.exe file in the bin folder of your Blanket project which you then need to add to the installer per the instructions.
SAP do offer development courses in some areas and there is training material here on the SDN and on the SAP partner portal (and maybe the customer portal as well). Try searching this forum for 'training' or 'tutorial' and you should get a few links. There's also a development certification.
Personally I'd recommend you give yourself a little project to work on and just get stuck in
Kind Regards,
Owen

How to use LSMW using the IDOC to upload and maintain cost center group

Hi Everyone,
Is there anyone who knows how to use LSMW using the IDOC functions instead of the recording. I wanted to upload the alternative cost center group I created in the system.
reply would be greatly appreciated
Warm Regards

Hi Praveen,
There is a risk trying to migrate data directly into standard tables because this can generate database inconsistences or wrong inserted data according to what is customized in the target system. I do not recommend migrate like this.
With LSMW you use objects like direct input programs, idocs, bapis and recorded batch input. Try to create a project and use an standard object for your data. Also, check in SXDA transaction (Goto-->DX programs) if there is a standard program for your data.
Anyway, if you want to upload data directly to tables, read below thread:
["UPLOAD CSV FILE";
[how to upload .csv file into a custom table;
Regards,
Roger

Safari won't start after showing an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.

Since yesterday evening (19-01-2015) safari won't start. After clicking the safari application it shows an error message: Safari can't use the extension "Omnibar" because the extension is no longer valid.
This message almost directly disappears whereupon the Problem Report opens. I've tried to find a solution on the web but without succes.
I'm running OS X Yosemite version 10.10.1 and Safari version 8.0.2 on a:
MacBook Pro (Retina 13-inch, Mid 2014)
Processor 3 GHz Intel Core i7
Memory 16 GB 1600 MHz DDR3
Graphics Intel Iris 1536 MB
Since I updated to Yosemite I've been having multiple problems. I already read a clean install will solve most of them. But till then I would love safari to work again.
Thanks!

There is no need to download anything to solve this problem.
If Safari crashes on launch and you don't have another web browser, you should be able to launch Safari by starting up in safe mode.
You may have installed the "Genieo" or "InstallMac" ad-injection malware. Follow the instructions on this Apple Support page to remove it.
Back up all data before making any changes.
Besides the files listed in the linked support article, you may also need to remove this file in the same way:
~/Library/LaunchAgents/com.genieo.completer.ltvbit.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those you find, remove them as well.
One of the steps in the article is to remove malicious Safari extensions. Do the equivalent in the Chrome and Firefox browsers, if you use either of those.
After removing the malware, remember to reset your home page in all the web browsers affected, if it was changed.
If you don't find any of the files or extensions listed, or if removing them doesn't stop the ad injection, then you may have one of the other kinds of adware covered by the support article. Follow the rest of the instructions in the article.
Make sure you don't repeat the mistake that led you to install the malware. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad would probably have included a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If you ever download a file that isn't obviously what you expected, delete it immediately.
In the Security & Privacy pane of System Preferences, select the General tab. The radio button marked Anywhere should not be selected. If it is, click the lock icon to unlock the settings, then select one of the other buttons. After that, don't ignore a warning that you are about to run or install an application from an unknown developer.
Still in System Preferences, open the App Store or Software Update pane and check the box marked
Install system data files and security updates (OS X 10.10 or later)
or
Download updates automatically (OS X 10.9 or earlier)
if it's not already checked.

Somehow my iPad got switched for messaging to showing from my email. There is no option showing to use my phone number. How do I get it back to my phone number? This happened when I upgraded my iPhone today, but it is using the phone number fine.

Somehow my iPad got switched for messaging to showing from my email. There is no option showing to use my phone number. How do I get it back to my phone number? This happened when I upgraded my iPhone today, but the iPhone messaging is using the phone number fine. It's only the iPad messaging that is messed up. Help, pls.
thanks!

You can link the phone number to the iPad again, if you follow the instructions here.
iOS 6 and OS X Mountain Lion: Link your phone number and Apple ...
The relevant information for you will be at the end of the article. You may have to sign out of messages on the iPhone and the iPad and start all over again.

I have not used my CS3 version for about 3-4 years. I tried to use it recently and I get a message about activation. Called the phone number recommended but no longer in use. How do I start using MY version I paid for? Using PC

I have not used my CS3 version for about 3-4 years. I tried to use it recently and I get a message about activation. Called the phone number recommended but no longer in use. How do I start using MY version I paid for? Using PC

Can you activate CS3. If you lost your serial you can retrieve it from Adobe.com. Sign in at Adobe.com the use this link https://www.adobe.com/account/my-products-services.html When your Adobe Product list is displayed click on your CS3 product your serial number should be displayed.

I want to remove the yahoo search bar from Firefox and use the google search bar.

I did go to about:config and made the keyword.URL to default (Google). It is not getting affected. Please help me to know how can I set it in Firefox.
I need to remove yahoo search from my Firefox and use the Google search. I did the following steps for the same.
about:config, searched keyword:URL and reset to default.
But the change is not getting affected. Pls help

Work around that I have used (my machine is running Windows XP SP3 might work on other systems as well):
1) Ensure Firefox is closed, if necessary read this in another browser
2. Open the Firefox directory on the hard drive (typically: C:\Program Files\Mozilla Firefox)
3. Go into the 'searchplugins' folder
4. Delete the file named 'yahoo.xml'
5. Immediately restart your machine

Everytime I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Every time I try charging my Note 3 I get an error message: To charge faster, use the cable and device that were provided with this phone. What is the solution? The cable is fine and is the original charger!

Hello teachermama10, The Factory Data Reset does remove all data including files and photos. I understand that making sure your phone information is backed up is of the upmost importance. You can ensure your phone data is backed up using these links: http://vz.to/1uM5mwZ and http://vz.to/1vEzYok. You can also try our great Verizon Cloud feature as an option for backing up and syncing your phone info! Check it out: http://vz.to/1s4GctA.
TanishaS1_VZW
Follow us on Twitter @VZWSupport

Searching Message ID in XI using the IDOC number produced in S1P

Similar Messages

Maybe you are looking for