Searching over network doesn't work

Hey everybody, I seem to be having a big problem with searching over the network. Whenever I type something in to search, and tell it to look over the "shared" network, it doesn't even try and comes up with zero results. I switch from "Contents" and "File Name" with no luck at all. I know the files are there because I go and manually look for them. Is there something I'm doing wrong or a way I can fix this? Thanks.

If you're running Tiger, why are you posting here? If your profile info is obsolete, update it. Search these forums for *search server*, *search network*, and other variants. There have been numerous posts on the subject in the Leopard forums.

Similar Messages

Can print over network, but scan over network doesn't work

Scanner communication cannot be established from Windows 7 PC to 1536dnf MP.
Printing from that computer is fine. scanning from other computers over the network is fine also.
I have uninstalled and reinstalled HP software, but that didn't fix the issue.
Scanning worked from this PC previously, but recent networking changes required I rediscover printer via a fresh install.
With my old router, the HP software would auto-discover the printer on the network, with the new network, that fails, and I have to provide a specific IP address to search, which then succeeds.
I am trying to understand where communication between win 7 PC and scanner might be misconfigured, when same PC communicates to the printer in the same MFP works fine.

Hi @tennisfan76 ,
I see that you are having issues scanning over the network. The Print and Scan Doctor detected a issue with the Wia drivers. I will certainly do my best to help you.
Are you signed is a the Administrator of that computer?
WIA drivers are part of Windows Operating System.
Run this Microsoft Fit It Tool to see if it will resolve this issue.
Diagnose and repair Windows File and Folder Problems automatically.
I have provided this document, just to make sure these are the same ones you had checked.
This document is to Check the Windows Image Acquisition (WIA) services.
Windows: HP Scan Software Does Not Open or Scan on a Printer Using a USB Connection.
Disregard the title.
Go to Solution three: Check the Windows Image Acquisition (WIA) services.
Temporarily turn of the Antivirus Software and try scanning again.
If the issue persists, download and try to repair the WIA drivers. If you don't feel comfortable about doing these steps, you can contact the computer manufacturer or Microsoft to resolve this WIA error.
Back up the registry first.
How to back up and restore the registry in Windows.
Restore Default Startup Type for Windows Image Acquisition (WIA).
Please let me know the results.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

[Solved] Network doesn't work after hibernate?

Hello! This is my first legit Linux install so excuse me if I'm a bit slow. I installed Arch last night and everything went smoothly. However, after I tested out hibernate on my machine, the network doesn't seem to work. Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver. Running "dmesg | grep e1000e" says that it is up.
I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd. I am using wicd so I did the following (or at least I think I am only using wicd):
#rc.d stop network
#rc.d stop dhcpcd
#rc.d stop networkmanager
Similarly, I put a ! in front of network in rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged, using "" makes hwclock fall back
# to the value in /var/lib/hwclock/adjfile
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# Note: if unset, the value in /etc/localtime is used unchanged
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/New_York"
KEYMAP="us"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MODULES=()
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="Vicious"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
# - broadcast: broadcast address (ignored for DHCP) (optional)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# broadcast=192.168.0.255
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
broadcast=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
Restarting eth0 through wicd-cli still did not work. I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work. Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved? But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work. As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
mkinitcpio.conf:
# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run. Advanced users may wish to specify all system modules
# in this array. For instance:
# MODULES="piix ide_disk reiserfs"
MODULES=""
# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image. This is run first, so it may be used to
# override the actual binaries used in a given hook.
# (Existing files are NOT overwritten if already added)
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=""
# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way. This is useful for config files.
# Some users may wish to include modprobe.conf for custom module options
# like so:
# FILES="/etc/modprobe.d/modprobe.conf"
FILES=""
# HOOKS
# This is the most important setting in this file. The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
## This setup specifies all modules in the MODULES setting above.
## No raid, lvm2, or encrypted root is needed.
# HOOKS="base"
## This setup will autodetect all modules for your system and should
## work as a sane default
# HOOKS="base udev autodetect pata scsi sata filesystems"
## This is identical to the above, except the old ide subsystem is
## used for IDE devices instead of the new pata subsystem.
# HOOKS="base udev autodetect ide scsi sata filesystems"
## This setup will generate a 'full' image which supports most systems.
## No autodetection is done.
# HOOKS="base udev pata scsi sata usb filesystems"
## This setup assembles a pata mdadm array with an encrypted root FS.
## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
# HOOKS="base udev pata mdadm encrypt filesystems"
## This setup loads an lvm2 volume group on a usb device.
# HOOKS="base udev usb lvm2 filesystems"
HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
# COMPRESSION
# Use this to compress the initramfs image. With kernels earlier than
# 2.6.30, only gzip is supported, which is also the default. Newer kernels
# support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
# compression.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=""
Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is. Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
fstab.conf:
# /etc/fstab: static file system information
# <file system> <dir> <type> <options> <dump> <pass>
none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
/dev/sda1 / ext4 defaults,noatime,discard 0 1
/dev/sda2 /home ext4 defaults,noatime,discard 0 2
/dev/sdc1 /boot ext4 defaults 0 1
/dev/sdc2 /var ext4 defaults 0 0
/dev/sdc3 swap swap defaults 0 0
/dev/sdc4 /media/data ext4 defaults 0 0
shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
Is wicd causing these problems or did I configure something else improperly? Would appreciate any help to get eth0 up again!
Last edited by TheBigCow7 (2011-09-13 17:57:20)

Ok, I think I've made some progress! Hibernate definitely affects my network connection. Could this be a kernel 3.0 problem?
I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time. e1000e seemed to be loading up ok. I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
Trying to use dhcpcd like the instructions here did not work. By some chance, one attempt did work and while it did, I downloaded and installed dhclient. After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
Luckily though, I found that running "dhclient eth0" worked. My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot. Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
Now, eth0 works after a boot. However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before). I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings).
Is this the correct/most efficient way to fix my DHCP problem? Can I fix my "eth0 after hibernate" issue? Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

Search by name doesn't work

search by name doesn't work
I want to search a registry (local Registry Server) for organizations by name using the Registry
Browser. But I get the message No organizations found. When doing a search by classification the
object is found and has the name i was searching for.
Then I've try the search with this one:
http://developer.java.sun.com/developer/technicalArticles/WebServices/jaxrws/ (to run it you have to
correct the code). But there is the same result: Serach by classification works and search by name
not.
Can anybody tell me what's wrong?

I experienced the same problem when trying to run the examples in the Web Services Developer Pack 1.0_01. I found out that there seems to be a bug in the UDDI registry when using a different locale then en_US.
When I use sv_SE as locale I dont get any hits when querying the registry by name, querying by classification works. Also ; if I get a hit the name and description fields are empty (this causes a NullPointerException in the JWSDP portal example)
If I switch to en_US locale both querying by name and retrieving description works fine.
There seems to be two bug-reports regarding this, see http://developer.java.sun.com/developer/bugParade/bugs/4711368.html and http://developer.java.sun.com/developer/bugParade/bugs/4779503.html

Search in ical doesn't work

I am using 10.7.4 and my iCal search doesn't work. When I type in a search term, the results pane is blank.
Help, please.

Brentbin,
Notice other posts, but where's the fix?
What have you tried?
Have you tried to...quit iCal, open System Preferences>Spotlight>Privacy, and add your Macintosh HD to the list?
Wait a couple of minutes, and then remove your Macintosh HD from the Privacy list. You should notice (after a short delay) that Spotlight is reindexing your HD. After Spotlight completes the index, open iCal and see if your search works.
;~)

Connecting to other computers on network doesn't work as expected.

This is kind of interesting.
I do this: From Menu Go > Network
Then I choose either my iMac or MacBook Pro and double click the user name for my home folders on the other computers.
A window opens up and the bottom right of the window the little twirling busy thing just goes and goes and goes.
I notice the server icon on the Desktop and double click it and everything is there an access is fast, just like I expected from the first window that popped up. But it's still there, blank, with a little twirly thing (very technical).
I get what I'm after, but it doesn't work the way it should.

Try keeping your shares from sleeping during the expected period of use--assuming they are. If this procedure works, then you'll need to decide between the "lesser of the two evils."

LInks over shape doesn't work

I just recently reformatted my iWeb pages and I love them. The problem is that most of them are buried under a pictures category (I want them that way). When I created hyperlinks in iWeb it changed the color of my font. So I inserted a shape behind the text and put the hyperlinks there.
That doesn't work. I also tried putting the hyperlinks back on the text and when I publish, they don't work either. I like the shapes and don't want to remove them. How can I keep the pink shapes under my pictures page and keep the text white?
http://web.mac.com/kryst1012/iWeb/Krystin/Photos.html

Keep all of your shapes right where they are! To make your text into hyperlinks then, just insert another shape...make it big or small enough to cover your text. Go ahead and drag it right over your text. Now attach the hyperlink to this shape. Now in the INspector,click over to the Graphics tab and change the opacity of this shape to 1%.
You have now created a "hotspot" hyperlink over your text! All without moving any of your other shapes around! Publish and see the results... Let me know if it works out for you!

Xcelsius/Dashboard Design - mouse over capability doesn't work/losing hover

Hello there, I am currently in a tough situation. If any Xcelsius gurus can provide me with a solution, I would very much appreciate your help.
I currently have a dashboard with pie chart component in the default view. It has a radio button with two values. The mouse over doesn't work when the dashboard is loaded. However, when I make a selection in the radio button, the mouse over works for both the options. I have noticed this is a bug but if anyone has a solution or way around it, let me know.
Another issue - I have a 'All' view and 'Region' views in the menu bar. When a user clicks on a particular Region, then clicks all and goes back to a region, I lose the drill down capability on the pie chart thats on the Region view. initially, the mouse over and drill down works fine. However, after going to the All view and coming back to a region, this capability is lost. It acts the same way as the problem above. User can't hover nor drill down. If anyone has a solution to this, let me know.

FYI this is the article on the main forum page:
Announcement: New to Spry, or the Spry forums?
Hide Details
Before you post a topic please verify that:
You are using the latest Spry files
The latest version of the Adobe Spry Framework is 1.6.1, this is the same version that ships with Dreamweaver CS4. If you use Dreamweaver CS3 (uses Spry 1.4), its wise to upgrade your files to the latest version. This can easily be done using the Spry Updater that can be found here.
After that we will have a look at your code.
Ben

LC + ActiveDirectory + LDAP over SSL = doesn't work

Hi,
I installed Active Directory Certificate Services. Now I want setup LDAP over SSL. Unfortunatelly it doesn't work. I pressed "Test" and always get "Invalid username or invalid password" (
German: "Ungültiger Benutzername oder ungültiges Kennwort"). I'm pretty sure username and password are fine (it worked before I installed Active Directory Certificate Services and used LDAP without SSL).
On server.log, I got this:
2011-11-12 00:51:28,202 INFO [com.adobe.idp.um.businesslogic.synch.LdapHelper] Following stacktrace is generated due to the Test LDAP Server Configuration action
javax.naming.AuthenticationException: [LDAP: error code 49 - 80090308: LdapErr: DSID-0C0903A9, comment: AcceptSecurityContext error, data 52e, v1db1]
        at com.sun.jndi.ldap.LdapCtx.mapErrorCode(LdapCtx.java:3041)
        at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2987)
        at com.sun.jndi.ldap.LdapCtx.processReturnCode(LdapCtx.java:2789)
        at com.sun.jndi.ldap.LdapCtx.connect(LdapCtx.java:2703)
        at com.sun.jndi.ldap.LdapCtx.<init>(LdapCtx.java:293)
        at com.sun.jndi.ldap.LdapCtxFactory.getUsingURL(LdapCtxFactory.java:175)
        at com.sun.jndi.ldap.LdapCtxFactory.getUsingURLs(LdapCtxFactory.java:193)
        at com.sun.jndi.ldap.LdapCtxFactory.getLdapCtxInstance(LdapCtxFactory.java:136)
        at com.sun.jndi.ldap.LdapCtxFactory.getInitialContext(LdapCtxFactory.java:66)
        at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
        at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
        at javax.naming.InitialContext.init(InitialContext.java:223)
        at javax.naming.ldap.InitialLdapContext.<init>(InitialLdapContext.java:134)
        at com.adobe.idp.um.businesslogic.synch.LdapHelper.createContext(LdapHelper.java:663)
        at com.adobe.idp.um.businesslogic.synch.LdapHelper.testServerConfig(LdapHelper.java:682)
        at com.adobe.idp.um.ui.config.ConfigDirectoryEditAction.testServerSettings_onClick(ConfigDirectoryEditAction.java:215)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.cc.framework.adapter.struts.ActionUtil.handleFormAction(Unknown Source)
        at com.cc.framework.adapter.struts.FWAction.handleFormAction(Unknown Source)
        at com.cc.framework.adapter.struts.ActionUtil.execute(Unknown Source)
        at com.cc.framework.adapter.struts.FWAction.execute(Unknown Source)
        at com.cc.framework.adapter.struts.FWAction.execute(Unknown Source)
        at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
        at org.apache.struts.action.RequestProcessor.process(RequestProcessor.java:236)
        at org.apache.struts.action.ActionServlet.process(ActionServlet.java:1196)
        at org.apache.struts.action.ActionServlet.doPost(ActionServlet.java:432)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:710)
        at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at com.adobe.framework.SetCharacterEncodingFilter.doFilter(SetCharacterEncodingFilter.java:173)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at com.adobe.idp.um.auth.filter.AuthenticationFilter.doFilter(AuthenticationFilter.java:154)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at com.adobe.idp.um.auth.filter.PortalSSOFilter.doFilter(PortalSSOFilter.java:91)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at com.adobe.idp.um.auth.filter.CSRFFilter.doFilter(CSRFFilter.java:41)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at org.jboss.web.tomcat.filters.ReplyHeaderFilter.doFilter(ReplyHeaderFilter.java:96)
        at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:235)
        at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206)
        at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:230)
        at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:175)
        at org.jboss.web.tomcat.security.SecurityAssociationValve.invoke(SecurityAssociationValve.java:179)
        at org.apache.catalina.authenticator.AuthenticatorBase.invoke(AuthenticatorBase.java:433)
        at org.jboss.web.tomcat.security.JaccContextValve.invoke(JaccContextValve.java:84)
        at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128)
        at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:104)
        at org.jboss.web.tomcat.service.jca.CachedConnectionValve.invoke(CachedConnectionValve.java:157)
        at org.apache.catalina.valves.AccessLogValve.invoke(AccessLogValve.java:543)
        at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109)
        at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:241)
        at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:844)
        at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:580)
        at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447)
        at java.lang.Thread.run(Thread.java:619)
Do you have some Idea?
cu Floh

I have not done it for Netscape yet but I have done it for Novell and JNDI.. Here is the settings for Novell
// Dynamically set JSSE as a security provider
Security.addProvider(new com.sun.net.ssl.internal.ssl.Provider());
// Dynamically set the property that JSSE uses to identify
// the keystore that holds trusted root certificates
System.setProperty("javax.net.ssl.trustStore", m_connectionData.getLocal("KeyStore").toString());
ssf = new LDAPJSSESecureSocketFactory();
// Set the socket factory as the default for all future connections
LDAPConnection.setSocketFactory(ssf);

Search Region Source doesn't work for some searches

I am updating a table, and I wanted to search our Apex app to see what reports are using the table. I typed in the table name and no results came back.
I knew of one report that definitely uses that table, so I went to it, copied the table name from the query source, and tried the search again - Still no results.
I tried a different table name, and got a whole bunch of hits.
The table name that doesn't work is floor_suite_billing
I even tried partials of that name, but I do not get the report that uses that table.
Is there something I am missing?
TIA
John

So, I created a test report using "select * from floor_suite_billing" and did a search. This new report came up in the results but the other one didn't.
Then I tried searching for other keywords from the query but that report still does not show up..
does anyone have a reliable way of searching Apex?
Thanks!
John

Search 1D array doesn't works.

Hi.
I have a bunch of data. Let say 48000 elements. And from it, I try to search, one element using 'Search 1D array' .
However it doesn't work as wanted.
I put an indicator on output of the 'Search 1D array' , but the value always "-1".
Anybody could help me. Please refer to my VI as reference. The 'Search 1D array' is used under case structure of "Synchronize Pressure and Alpha".
Thanks.
Firdaus
Solved!
Go to Solution.
Attachments:
Acquifinale Updated 8 - Real World - other Different Method.vi ‏154 KB
Calculation.vi ‏15 KB

Hi Norbert,
Please find the attachment below.
By the way, could you give one example on how to change the array from DAQ into integeter. Because, as from your suggestion, I simply use converter 'To Unsigned Byte Integer'.
Firdaus
Attachments:
Acquifinale Updated 8 - Real World - other Different Method.vi ‏155 KB
Calculation.vi ‏15 KB

Location bar search/keyword feature doesn't work the same as 3.x

In 3.x I could type anything in the location bar and it would "resolve" it. I could type "google maps" and it would go to maps.google.com, "yahoo mail" and it would go to mail.yahoo.com. And if it couldn't figure it out then it would do a google search.
Now, in 4, if I type the same things I get "This URL is not valid and can't be loaded." I tried to disable the fixup feature to see if that was interfering but that didn't help. I liked it the old way when I just typed what I was thinking and it would take me where I wanted to go. I've verified this many times as I still have 3 at home and 4 at work.
I also hate that the refresh button moved.

I have this same issue- I have tried changing it the way you say to, but every time I close the browser it resets and I have to change it every time I search- I should be able to type in "target" and be taken to target.com- it says that this works, but all it does is search for target and it won't even do that unless I change the settings every time I open the browser- I never had any problems with 3.5 or 6 and I am going to uninstall 4.0 and go back- it doesn't work like an updated browser should- it is worse!

[SOLVED] VMware player, network doesn't work

Hi!
I installed VMware player through AUR and it works well. But when I started my vm (Debian 4.0) it asked if I had copied or moved it. I chose "I copied it" because I copied it from my hdd to external hdd. I started my vm but network didn't work. I configured network using vmware-config.pl file like it recommended (vmnet0 as bridged with my wlan0 and vmnet8 as NAT. I also chose to use host-only networking in my vm's (wmaster0)). How did you guys configured your network succesfully?
I just want it to work like on my windows box. It has it's own IP and I can connect to it's IP directly from firefox. Yeah, I run webserver on that vm.
My ifconfig:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:656 errors:0 dropped:0 overruns:0 frame:0
TX packets:656 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:24109 (23.5 Kb) TX bytes:24109 (23.5 Kb)
vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01
inet addr:172.16.22.1 Bcast:172.16.22.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08
inet addr:172.16.43.1 Bcast:172.16.43.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:1B:77:04:D4:D0
inet addr:192.168.0.20 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21b:77ff:fe04:d4d0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22719 errors:0 dropped:0 overruns:0 frame:0
TX packets:14300 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14584732 (13.9 Mb) TX bytes:2004755 (1.9 Mb)
wmaster0 Link encap:UNSPEC HWaddr 00-1B-77-04-D4-D0-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Last edited by Nuck (2008-07-12 18:27:49)

Nuck wrote:
Hi!
I installed VMware player through AUR and it works well. But when I started my vm (Debian 4.0) it asked if I had copied or moved it. I chose "I copied it" because I copied it from my hdd to external hdd. I started my vm but network didn't work. I configured network using vmware-config.pl file like it recommended (vmnet0 as bridged with my wlan0 and vmnet8 as NAT. I also chose to use host-only networking in my vm's (wmaster0)). How did you guys configured your network succesfully?
I just want it to work like on my windows box. It has it's own IP and I can connect to it's IP directly from firefox. Yeah, I run webserver on that vm.
My ifconfig:
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:656 errors:0 dropped:0 overruns:0 frame:0
TX packets:656 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:24109 (23.5 Kb) TX bytes:24109 (23.5 Kb)
vmnet1 Link encap:Ethernet HWaddr 00:50:56:C0:00:01
inet addr:172.16.22.1 Bcast:172.16.22.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fec0:1/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
vmnet8 Link encap:Ethernet HWaddr 00:50:56:C0:00:08
inet addr:172.16.43.1 Bcast:172.16.43.255 Mask:255.255.255.0
inet6 addr: fe80::250:56ff:fec0:8/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
wlan0 Link encap:Ethernet HWaddr 00:1B:77:04:D4:D0
inet addr:192.168.0.20 Bcast:192.168.0.255 Mask:255.255.255.0
inet6 addr: fe80::21b:77ff:fe04:d4d0/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:22719 errors:0 dropped:0 overruns:0 frame:0
TX packets:14300 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:14584732 (13.9 Mb) TX bytes:2004755 (1.9 Mb)
wmaster0 Link encap:UNSPEC HWaddr 00-1B-77-04-D4-D0-00-00-00-00-00-00-00-00-00-00
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
set the network connection to NAT not BRIDGE (in the settings tab). i never got BRIDGE running, but i also haven't tried too hard.
Last edited by DonVla (2008-07-12 17:01:31)

Http tunneling (t3 over http) doesn't work!! (examples too)

Hi,
I'm trying to get http tunneling (t3 connection over http protocol) to work. I
ran some examples included with Weblogic that try establishing that connection
(PingTest, HelloApplet, SimpleT3Client), as well as my own test program, and they
all give an error similar to this :
Couldn't get a reference to server. Exception :
javax.naming.CommunicationException. Root exception is java.net.ConnectException:
No server found at HTTP://<IP>:<port>
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:161) at weblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:200)
at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java,
Compiled Code) at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:148)
at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:123)
at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:671) at
javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:242) at javax.naming.InitialContext.init(InitialContext.java:218)
at javax.naming.InitialContext.<init>(InitialContext.java:194)
(I replaced the actual Ip and port with <IP> and <port>).
Now, the server is started and working at that ip and port - it services web http
requests correctly, etc. Regular T3 connection (not over http) also works with
it.
Does anyone know the reason for this problem and/or how to fix it?
Thanks, Leonid Portnoy

It appears that one has to use the "Java Plugin" for this mode to work. The
question is does the version of plugin need to be "in sync" with the JVM
version on the server. ?.
/rk
"Adomas Svirskas" <[email protected]> wrote in message
news:[email protected]...
>
It seems that the solution is to have these two lines in the
properties file:
weblogic.httpd.enable=true
weblogic.httpd.tunnelingenabled=true
Now it works.
Thanks,
Adomas
"Adomas Svirskas" <[email protected]> wrote:
Hi Leonid,
Have you found a solution for this? I have these problems too.
Thanks,
Adomas
"Leonid Portnoy" <[email protected]> wrote:
Hi,
I'm trying to get http tunneling (t3 connection over http protocol)to
work. I
ran some examples included with Weblogic that try establishing thatconnection
(PingTest, HelloApplet, SimpleT3Client), as well as my own test program,
and they
all give an error similar to this :
Couldn't get a reference to server. Exception :
javax.naming.CommunicationException. Root exception is
java.net.ConnectException:
No server found at HTTP://<IP>:<port>
at weblogic.rjvm.RJVMFinder.findOrCreate(RJVMFinder.java:161) atweblogic.rjvm.ServerURL.findOrCreateRJVM(ServerURL.java:200)
atweblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFactoryDelegate.java,
Compiled Code) atweblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialCon
textFactoryDelegate.java:148)
atweblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFact
ory.java:123)
atjavax.naming.spi.NamingManager.getInitialContext(NamingManager.java:671)
at
javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:242)
at javax.naming.InitialContext.init(InitialContext.java:218)
at javax.naming.InitialContext.<init>(InitialContext.java:194)
(I replaced the actual Ip and port with <IP> and <port>).
Now, the server is started and working at that ip and port - it services
web http
requests correctly, etc. Regular T3 connection (not over http) alsoworks
with
it.
Does anyone know the reason for this problem and/or how to fix it?
Thanks, Leonid Portnoy

Receiveing data over RTP doesn't work

First of all , excuse my english.....it really sucks
Second of all , this is my problem:
I modified the JMStudio source to suit my needs.....leaving just what i needed.The application works......it sends data just fine but it does't receives it.I tried to rewrite the function thousand of times in different modes but it doesn't work.
This is my source code :
          private void openRtp () {
OpenRtpDialog dlgOpenRtp;
String strAction;
String strAddress;
String strPort;
String strTtl;
RTPManager           receptie=RTPManager.newInstance();
InetAddress      adresaip=null;
int                    port,ttl;
ReceiveStreamListener receptiestr = null;
ReceiveStreamEvent     x = null;
dlgOpenRtp = new OpenRtpDialog ( this, cfgJMApps );
     dlgOpenRtp.isVisible ();
strAction = dlgOpenRtp.getAction ();
if ( !strAction.equals(JMDialog.ACTION_OPEN) )
return;
strAddress = dlgOpenRtp.getAddress();
strPort = dlgOpenRtp.getPort ();
strTtl = dlgOpenRtp.getTtl ();
               try {
                    adresaip=InetAddress.getByName(strAddress);
               } catch (UnknownHostException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
port=Integer.valueOf(strPort).intValue();
ttl=Integer.valueOf(strTtl).intValue();
SessionAddress adresa=new SessionAddress(adresaip,port,ttl);
     try {
                    receptie.initialize(adresa);
               } catch (InvalidSessionAddressException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
               } catch (IOException e) {
                    // TODO Auto-generated catch block
                    e.printStackTrace();
if ( receptie == null ) {
MessageDialog.createErrorDialog ( this, JMFI18N.getResource("jmstudio.error.sessionmngr.create") );
return;
receptie.addReceiveStreamListener(receptiestr);
receptiestr.update(x);
update(x);
// the rest will be done when we get NewReceiveStreamEvent
updateMenu ();
pls tell me what i do wrong cause it's driving me insane......the function from the JMStudio works in the original but doesn't work in my version so it makes me think that the problem is from somewhere else.
For further assistance i'll be watching this thread closely.
Thank you for your help.
Yours gratefully,
Sorin

I'm just going to point you in the direction of some sample code...
[http://java.sun.com/javase/technologies/desktop/media/jmf/2.1.1/solutions/AVReceive.html]
Go look at their "initialize" function and figure out what the sample code is doing that you aren't...
And remember, it could simply be a matter of doing something wrong with IP address... You can't use 127.0.0.1 for RTP transmissions, and you can't broadcast to the same computer if your transmit code is binding the destination port as the transmission port. IE, if you tell it to broadcast to the remote computer on port 2600, and it uses the local port 2600 to broadcast on...then you won't be able to read from port 2600 on the local computer.

Searching over network doesn't work

Similar Messages

Maybe you are looking for