Searching Windows Drivers for 23" Display

Hi,
I got a 23" Cinema Display and I'm using Windows XP.
There is still a "Default Monitor" shown in preferences. Where do I get the correct drivers, so I can set the frequency to more than 60 Hz?
I would appreciate a download link or something where I can find the windows drivers for the Cinema Display.
Cheers,
Oli

You can try WinACD drivers (google for it). LCD panels aren't like CRT monitors and are supposed to run at 60Hz, so there's no reason or way to change it.

Similar Messages

  • Disable USB driver installation from searching Windows Updates for software

    Hello,
    When a plug-n-play device is connected to a Windows 7 system, the system by default tries to search Windows update for compatible drivers.  I have a preconfigured driver store on each system that will have the drivers for all of the USB devices we care
    about so I'd like to search the local driver store first before searching for Windows updates.  
    I found the option that controls this under System Properties > Advanced system settings > Hardware tab > Device Installation Settings.  I have set this option before my machines run through sysprep, however, sysprep appears to be resetting
    the option back to the Windows default (Yes, do this automatically) and ignores what I set it to.
    I have a reg key that I'm running post-sysprep, but I'd like to avoid this as it's an extra step and I don't want to have to account for it long-term.  My question is, is there a way to set this option in my sysprep unattend file?  

    If this is a domain joined machine, this can be set by a Group Policy Object;
    Open Group Policy Management Editor.
    In the navigation pane, open Computer Configuration\Administrative Templates\System\Internet Communication Management\Internet
    Communication settings.
    In the details pane, double-click Turn off Windows Update device driver searching.
    Do one of the following:
    To turn off searching Windows Update, click Enabled.
    To allow searching Windows Update, click Disabled.
    Click OK to save your settings.
    Instructions taken from: http://technet.microsoft.com/en-us/library/cc730606(v=ws.10).aspx
    If this PC is not on the domain (but is Pro) you may be able to set the same option on the Local Group Policy (GPEDIT.MSC).
    Kind Regards
    Barry

  • Oh my lord, where can I get windows drivers for Macbook Pro?....

    Does Apple really not have any place that I can download Windows drivers for the hardware in my August 2010 Macbook Pro?!?  I am trying to use windows through bootcamp, and I am having tons of trouble.  I know there are supposed to be drivers in the OSX DVD that came with my computer, but that is all the way back in Maryland and I go to school in Tennessee.
    <rant> Sorry if I seem irritated.  I just got over a total hard drive crash in this computer that isn't even 2 years old.  I have drives that are almost 10 years old in my PC desktop..  The drive that came stock with my Macbook pro was a total piece of crap in comparison to the cheapest notebook drives at Best Buy.  Really Apple?? 5400 RPM 8mb Cache Hitachi drive?? *Pukes in mouth* </rant>

    Sorry for the rant.  This is what happens everytime I have tried.  I actually have a booting Windows 7 partition on here already but it is barely running on the stock/generic windows drivers that are just there to get the OS through install. 
    I have an OSX 10.6 disk, but it is 10.6.0, and I wasn't even able to make that boot into the Mac installer when I installed OSX on the new hard drive.  I had to run my Macbook as a Firewire disk plugged into a Mac Pro and install it from there and update to 10.6.8.  I think this was because the 10.6.0 install disk doesn't have drivers for my 2010 revision of the Macbook Pro.  I doubt that the 10.6.0 disk has the right Windows drivers if it doesn't even have the right Mac drivers.

  • Why no Windows drivers for Bluetooth Headsets? (bh...

    I love my BH-102, it's the best headset I've had, and in fact even want to use it with my PC for things like skype, voice chat etc... whenever I'm home. I was shocked however to find there are no windows drivers for it! Why not? It's a massive additional market to free people from clunky annoying corded headset and mic combos. Does anyone know of any drivers, maybe I just didn't find them?

    This is not a problem with the headset but a bluetooth issue in windows, the default microsft bluetooth driver does not support all profiles, you need to make sure you install the proper drivers for your bluetooth chip.
    When the proper bluetooth drivers are installed you will be able to pair it properly and then go into settings and select the headset profile.
    I also had to change the default speakers to the headset under the windows sound settings.
    If you have a laptop the bluetooth drivers is probably on the manufacturers website, if you purchased a bluetooth usb dongle then you probably received a cd with it.

  • Windows drivers for  Pantech UML 290 ?

    Looking for  Pantech UML290 drivers  for Windows XP.
    The download link for VZAccess Manager 7.9.1.0 (2807b) is broken.
    http://www.vzam.net/download/supported.aspx

    Thank you for the prompt response, I'm downloading my very first version of
    VzaM and the link you just provided has returned another 404 message.
    On Fri, 21 Mar 2014 11:08:40 -0700 Verizon Wireless Customer Support  wrote

    RE: WINDOWS DRIVERS FOR PANTECH UML 290 ?
      created by Verizon Wireless Customer Support in _Broadband padding:
    10px; margin-top: 20px;">
    Reply to this message by replying to this email -or- go to the message on
    Verizon Wireless Community
    Start a new discussion in Broadband font-size: 10px; line-height: 16px;
    color: #666;" colspan="11">
    � 2011 Verizon Wireless
    Verizon Wireless | One Verizon Way | Mail Code: 180WVB | Basking Ridge, NJ
    07920
    We respect your privacy. Please review our privacy policy for more
    information.
    Not interested in these emails anymore, or want to change how often they
    come? Update your email preferences .  �
    Links:

  • Win98 drivers for onboard display

    I cant find Windows 98 drivers for the integrated graphics display card for 915G. I badly need them. Can you help please.

    Quote
    Originally posted by Ravisarma
    I cant find Windows 98 drivers for the integrated graphics display card for 915G. I badly need them. Can you help please.
    It would appear there is no such beast.  They had to stop making drivers for DOS at some point, too.

  • How can i get windows drivers for the 2013 MacBook Pro Retina?

    Hi there,
    today I have installed on my late 2013 MBP retina via the Boot Camp Windows 8.1. The installation was smoothly but some drivers are not present including the wifi driver.
    Through online research, I found out that in the current version of Boot Camp no drivers for the 2013 model are listed. Do you have one probably have an idea how to get it to run anyway?

    For feedback from experienced users,  post in the Final Cut Pro X forum here.
    They should be able to offer suggestions for training.
    Apple - Final Cut Pro X - Resources

  • In search of drivers for ATI Radeon 7000

    I recently purchased a used ATI Radeon 7000 PCI video card for my G3 beige, OS 9.2.2. This is an older model card with just the single VGA output. This comes up as card name "ATI, Bluestar", and card model "ATI, RV100" under Apple System Profiler so I'm a bit confused about that to start with. However, since ASP recognizes it I guess it seems to work though I haven't plugged my monitor into it yet.
    The problem is the drivers.
    I went to ATI's website to look for drivers to download to get this card working. They have an OS9 updater (ati-retail-9-2-2-jan2005.hqx) that should install a bunch of components. When I run it it only installs a partial set, contrary to what it says it should do. I've seen other postings on Apple Discussions about problems with this installer. ATI seems to make it impossible to contact them other than by telephone which is only open to original purchasers so I can't even tell them there's a problem (much less expect them to do anything about it). A search for Bluestar or RV100 reveals nothing on ATI's website.
    Has anybody gotten this installer to work? Is there some other source for drivers for this card? Can somebody e-mail them to me (I don't think this violates any rules since in theory they are openly down-loadable)?
    Thanks,
    Brian
    G3 beiges:DT, 9.2.2, 120GBide; DT, 9.2.2/OS X.3, 120GBide; MT, 8.6/9.2.2, 128MB,    

    Thanks to all for answering my questions. I decided in the end to just plug my monitor into the card and give it a try despite not haveing the groundwork properly set up. It works so it must be a Mac version of the card. This website (http://www.welovemacs.com/radeon7000vga.html) describes the card, including the model number (but I paid a LOT, LOT less than their price!).
    Yes, the installer does put all kinds of things in the System, but not the promised control panel. It looks like the CP isn't essential to the working of the card so I'm not worrying anymore. I used the Apple monitors control panel to set the resolution a few times but it froze up on me once when setting it to 640x480. After that I pulled a copy of Super Res that I had in storage and have been using that.
    As to the graphics acceleration, it's kind of hard to tell. I tried viewing a mp4 video clip I have with Quicktime 6. Before the card I could maybe watch a minute before my computer would freeze up. Now I can watch maybe 3 minutes before it freezes up, but the video is very jerky, even when compared to the one minute before card installation. I may now be experiencing the limitations of my 266 MHz G3 in terms of decoding mp4, but this doesn't explain why video seemed smoother before, brief though it was before a freeze.
    I then tried a video game. Actually video wasn't too slow with this even with my old configuration. Now things seem to hesitate when the play gets busy and it remids me of when I used to play Crystal Quest on a Mac SE. In this case the card has made things slower.
    With general scrolling I don't really notice a difference. There's still hesitation at times. In all the cases I have mentioned the ATI thing in the menu bar says grahics acceleration is on.
    So in actuality I haven't really noticed any improvement with this card. If anybody has any tips on ways to tune the system to take more advantage of the card I'd welcome them.
    Thanks,
    Brian

  • Windows drivers for 2006 macbook???

    I am using a late 2006 macbook with lion on mac partition and i just installed windows xp sp3 with bootcamp,i am having a problem trying to find the drivers for ethernet, wireless, pci and usb device???

    If you have a 10.6 Snow Leopard install disk you can try to install them while booted into Windows. Since Lion doesn't support XP or Vista the 3.0, 3.1, 3.2, and maybe 3.3 versions are going to be as good as it gets.

  • Windows drivers for SUN Quad PCI card

    Hi everyone.
    With the risk of being flamed, I have a question regarding drivers for a Sun QUAD network card. I belive it is a X1034A card.
    The card is also marked with a label saying: *5015406096836* and a barcode. On another label it sais: QFEPCI
    Is there any chance in h**l that this card would function under a Windows system?
    Best regards,
    Johan Christensson

    Hello Ben,
    I own the IntraServer LSI5464E which appears to be 501-5406-01 (using the DC21153-AC which was on my card manufactured by Intel not DEC).
    I was wrong, the 21153 is a PCI-to-PCI Bridge chip by Intel. I thought it's similar to the DEC PCI Fast Ethernet DECchip 21140.
    The 4 Ethernet controllers chips are manufactured by/for Sun.
    The datasheet for the LSI5464E is still available, while the drivers aren't.
    Michael
    When will the deficencies/bugs in the Forums software be fixed ?

  • No downloadable windows drivers for Magic Mouse?  Why not?

    My question is simple: Why doesn't Apple provide an easily downloadable Windows driver installer for the Magic Mouse?
    Apple has nothing to loose - the user would still have to purchase their Magic Mouse, and they might even gain some sales of the device from Windows users who prefer it.  Further, they already have a driver installer packaged and ready to go in the Boot Camp driver Bins (Binary.MultiTouchMouse_Bin) but to get it you have to download the ENTIRE Boot Camp archive, unzip it, extract the _Bin file in question, and rename it adding .exe to the end so Windows can run it.
    Other hardware manufacturers (including Microsoft) provide easily downloadable drivers for their products on multiple platforms, it would be nice to see the same courtesy extended by Apple.

    This is not a problem with the headset but a bluetooth issue in windows, the default microsft bluetooth driver does not support all profiles, you need to make sure you install the proper drivers for your bluetooth chip.
    When the proper bluetooth drivers are installed you will be able to pair it properly and then go into settings and select the headset profile.
    I also had to change the default speakers to the headset under the windows sound settings.
    If you have a laptop the bluetooth drivers is probably on the manufacturers website, if you purchased a bluetooth usb dongle then you probably received a cd with it.

  • Problem updating windows drivers for ipad, problem updating windows drivers for ipad

    Windows device manager see ipad with error. ! Finds driver but has a problem installing it. Ipad works ok with windows laptop.
    Any ideas/suggestions ?

    The most reliable information on running Windows on a Mac is most often not going to be your store or elsewhere but from ATI and Nvidia.
    Apple does not provide graphics drivers anymore than Microsoft does, just something basic is all.
    Nvidia - pls. check their web site for information first - has said they would in 2009 provide mobility drivers, for any and all platforms and users.
    A Mac running Windows is just a personal microcomputer. And all laptops have faced trouble with graphics.
    NVIDIA® is making it easier than ever to get the most capability and performance from your notebook by making NVIDIA® GeForce® notebook drivers available on NVIDIA.com. These drivers deliver sharp, crystal-clear, on-the-go graphics with lightning fast performance for games, videos, and images, all while maintaining manufacturer customizations, including hotkeys.
    And one more thing – NVIDIA notebook drivers now bring NVIDIA® CUDA™ technology to notebooks for the first time, including NVIDIA® PhysX™ technology for the latest games.
    http://www.nvidia.com/object/notebook_drivers.html
    Mobility driver for GF 9M Vista 32-bit:
    http://www.nvidia.com/object/geforcenotebook_winvista_179.48beta.html

  • Windows drivers for mac os x (10.7.1)

    i m using mac os x (10.7.1)...i have installed wondows7 in it. but i didnt get that original boot camp cd...so can anybody tell me how can i get drivers for windows7??

    https://discussions.apple.com/community/windows_software/boot_camp
    Ask there and do post your MBP specifics (model, etc...).

  • Windows drivers for NI-IMAQ 1394 Digital Cameras

    I´m looking for a windows driver for different digi cams. on our other application PC all cameras are registrated unter "NI-IMAQ IEEE 1394 Digital Camera", now we are using a PC as a RunTime PC, and all cameras are registrated as Standart cameras..... so MAX does not accept standart cams.
    Where can i find a driver to solve this
    Thanks

    Hi kimtsch
    here are some related links for your problem:
    http://zone.ni.com/devzone/conceptd.nsf/webmain/4E3CF3D4F3C5DF0D86256C250067A516
    http://digital.ni.com/public.nsf/websearch/C2F87C32F5627A0A862569E5006C17C4?OpenDocument
    I hope it helps.
    regards
    Manuel Wielander

  • Windows drivers for 5k retina display

    I bought the new iMac 5K retina and installed Windows 8.1 as a virtual machine. The operation is seamless but when running Windows as a VM the resolution is limited to half that of the OSX. Not even the 3820x18XX is available.
    Does anyone know if or when a driver for the full 5K resolution will be available? Obviously Apple has no vested interest in generating one to include in the Bootcamp set of drivers. But perhaps they should, as that might create a more compelling reason to attract Windows users to the Mac machines. They are the best hardware out there.
    Cheers

    The web is the web. Why anyone would even bother to use a 4k image is beyond me. Load times on that page are going to be awful. The rest is out of your control, anyway. You just don't know which browser will be used and how its scaling options are set nor do you know how the images may be mangled via the CSS formatting or other means like server-side processing. I seriously think you are obsessing over a non-issue.
    Mylenium

Maybe you are looking for

  • PS CS5 for MAC.  Photoshop crashes when I try to print  Any help appreciated

    Am running MAC OS Maverick.  Photoshop CS5 crashes when I press print tab.  Any solutions?

  • Sales order profit booking in another country

    Hi All I have a requirement for which, even after informing the customer that it is not possible to address in SAP, the customer wants us to give them solution. In spite of we giving them several suggestions to re-engineer the process, they want it t

  • How to pass NULL out of a service on an int member

    I accidentally posted this over in the VB section.  It would be helpful if a moderator could move it over here. Thanks. http://social.msdn.microsoft.com/Forums/vstudio/en-US/d339e6ac-9afc-4d71-84ac-47317e9e8de3/assigning-null-to-int-in-a-sqldatareade

  • Error in invoking target 'ntcontab.o' of make file.

    Hi, Operating System:Enterprise Linux Release 5 Update 2 for x86 (32 Bit) Database:Oracle Database 10g Release 2 (10.2.0.1.0) for Linux x86 When I am trying to installt database on the VMware virtaul machine i am getting the following error durig the

  • Memory ID value

    if i have a program z_test and in that i write a statement EXPORT lv_herld TO MEMORY ID 'W_LV_HERLD' and in some other program i write FREE memory ID 'z_test' will the memory 'W_LV_HERLD' which is included in z_text be freed or not.???