Season Pass Dr. Who Season 7 Part 1 AND 2

I have purchased a "season pass" for Dr. Who Season 7.  I purchased BOTH part 1 and part 2, but for some reason not all the episodes are available.  I know the new ones take a few days... but what happened to the Snowmen Christmas Special.It doesn't make sense to watch the episodes of part 2 if you haven't seen the Snowmen episode.  We watch three of season 7 and kept thinking something was wrong... we missed something.  Finally figured out the Snowmen episode is missing.    It certainly should be part of season 7... either part 1 OR part 2, but it appears I have to pay additional to watch it.  Are we doing something wrong? or is there some reason this is being held out for a separate fee?
In September I bought the season pass with the understanding it was for a SEASON.  I purchased part 2 begrudgingly, but thought I would be getting the rest of the season.  Seriously $30+ wasn't enough for a single season???  If there are going to be episodes "held out" of the season pass, there should certainly be a disclaimer letting the customer know.  I would have waited to by a DVD set if I'd known what this would cost me by the end of the season.  I am a big Apple fan, but unless I am doing something wrong to get the FULL season, this certainly seems like a scam.
Anyone know if this is supposed to be this way?

We are all just fellow users here and have no more idea than you do why any given item is not available. It's almost certainly an issue of rights, since the iTunes Store can sell only what they can license, but why ABC cannot or will not grant the rights is something no one here will know.
Regards.

Similar Messages

  • HT4743 My copy of Hide (Doctor Who, Season 7 part 2, has bad audio and I cannot delete and re-download.  How do I fix this?

    I have the season pass to Doctor Who season 7 part 2 and just downloaded Hide, but the audio is VERY messed up.  How can this be fixed?

    There is another thread about this here:
    https://discussions.apple.com/thread/4986433?tstart=0
    Tell iTunes store support if ithis is an isolated problem - they may need to re-encode the file if it's wrong.
    https://expresslane.apple.com/

  • Doctor who season 7 part 1 season pass

    I purchased the season pass for doctor who season 7 part 1.  I only have the first five episodes available and can't find any more available for purchase anywhere on iTunes. Has anyone else had this problem or know how to fix it? 

    These are user-to-user forums, nobody on here will know. But according to wikipedia the second part of the series is due to start showing here in the UK over Easter at the end of the month

  • When is Doctor Who season 7 part 2 going to be available

    When is Doctor Who season 7 part 2 going to be available?

    These are user-to-user forums, nobody on here will know. But according to wikipedia the second part of the series is due to start showing here in the UK over Easter at the end of the month

  • I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?

    I purchased a season of a TV show from itunes and it won't go onto my ipad, i've purchased several seasons in the past and never had this issue, how can i fix this?

    Drew how is that even possible? I use gift cards all the time, any time I've had insufficient funds iTunes will not allow the purchase, sights Insufficient funds and rejects the purchase. Any time I log into my account the money in that account appears in the upper left corner. If you're not seeing that then you have other issues. Anyway... Kneil is right you should be able to rip CDs you own to your iTunes library (regardless of your money matters with iTunes), then depending on how you set up the music you need to add it to your playlist and then sync it to your iPod. Did imported music ever work? How are you ripping or importing the music to iTunes? Are you using a compatible format?
    Something else to look at-- It's possible your cable is defective, have you tried a new or different cable? Some of what your describing is a bad cable issue. Good luck, Cheers.

  • I purchased season 1 of GCB and it has now been cancelled. How do I get my money back?

    I purchased season 1 of GCB and it has now been cancelled. How do I get my money back?

    Start here: http://www.apple.com/emea/support/itunes/contact.html

  • I bought the recent season of the bachelorette and the 4th episode is not downloading

    I bought the most recent season of the bachelorette and the 4th epesode is not downloading.  HELP

    The first thing you want to do is open itunes
    Then click on Store at the top of the screen and select "check for available downloads"
    If this doesn't allow you to download it you may need to contact itunes support (email only) and ask them to resend the download
    expresslane.apple.com
    I hope this helps!
    GL!

  • I'm syncing my Iphone 4 and it's not going passed backing up stage. Part 2 out of 6. What do I do?

    Hi so I'm syncing my Iphone 4 and it's not going passed backing up stage. Part 2 out of 6. What do I do?

    Unless your iPhone is jailbroken, there is no spyware on it.  There is no way for spyware to be downloaded or installed.  You don't really explain why you think you do.  As far as I can see, the Fortinet app is just an app providing information about their services - it isn't performing any functions on the phone itself.  Not clear what relevance you think the Norton security on your computer has to do with it.
    You might want to do something about that bug that is extracting all the punctuation from your writing though.....

  • How do I get passed the card/iTunes card part when I create an account?

    How do I get passed the card/iTunes card part when I create an account?

    You press on the itunes store, scroll down and look for a category that says "top free apps" placed at the bottom on the right. you press on the button "free" as if you want to download it and a small window opens. you press on the "create apple AD" and you fill in your information. when you get to the card part you press on the None. send me a message if you are still stuck.

  • I bought the second season of American Guns and it downloaded some episodes and not others this happened to the last season of American Chopper also for me.

    I purchased the second season of American Guns and the latest American Chopper and some episodes downloaded and some didn't and I go to purchase it again and it tells me already purchased but when I hit download it tells me to pay again then when I do it says already purchased???

    For those interested, the solution (at least in my case) is pretty simple:
    --Contact Apple Support and explain.
    --Have first-level support misinterpret your request.
    --Re-explain and ask for resolution.
    --Have the purchased items added to your download queue and then hit Check For Purchases.
    --Sit back and enjoy.
    Based on the WWDC announcements on 08-Jun, going forward, the solution will apparently be:
    --Download it from iCloud.
    Roaminggnome, you are simply wrong.  Demonstrably, purchases on iTunes are not one and only copy--even more so now with the entire concept of iCloud, but even beforehand you could download apps many times if you had bought them and removed them from your iOS device.  You'd think with all those discussion points, you'd troll less and actually give thought to responses more, but sometimes I say crazy things.

  • Just down loaded SOA season 5 episode 4 and i dont have audio!!! its not listed in istore yet how do i redownload it???

    just down loaded SOA season 5 episode 4 and i dont have audio!!! its not listed in istore yet how do i redownload it???

    @wetdro
    If your device has been jailbroken during the warranty, Apple will not service it.
    Maybe you missed that in this article:
    Inability to apply future software updates: Some unauthorized modifications have caused damage to iOS that is not repairable. This can result in the hacked iPhone, iPad, or iPod touch becoming permanently inoperable when a future Apple-supplied iOS update is installed.
    Apple strongly cautions against installing any software that hacks iOS. It is also important to note that unauthorized modification of iOS is a violation of the iOS end-user software license agreement and because of this, Apple may deny service for an iPhone, iPad, or iPod touch that has installed any unauthorized software.
    copied from Unauthorized modification of iOS can cause security vulnerabilities, instability, shortened battery life, and other issu…

  • HT4743 I downloaded a Mad Men Season 5 2nd show and it stops after 13:20... How do I get the full show or my money back?

    I downloaded a Mad Men Season 5 2nd show and it stops after 13:20... How do I get the full show or my money back?
    This is soooo frustrating!!

    No, never had any problems before. I heard another friend had the same problem with that episode. But I don't know what I can do about it.
    And yes, tried to restard the episode. Just freezes at that exact spot.

  • Cannot get URL web part filter to pass Parameter to List web part

    How do I wire an out-of-the-box URL web part filter to a SharePoint 2013 list (or "app" as renamed in 2013) web part when the list has a parameter?
    My SharePoint list uses a parameter because it needs a Contains filter, as in
         <Where>
          <Contains>
           <FieldRef Name="MyFieldName"/>
           <Value Type="Note">{MyParam}</Value>
          </Contains>
         </Where>
    The ParameterBinding is defined simply.
    <ParameterBinding Name="CohortParam" DefaultValue=""/>
    It has had Location="None" in the past, but another forum entry that I read suggested removing that.
    When I add the list (or "app" in SharePoint 2013) to a web part page and also add a URL Filter web part, the URL filter cannot see the parameter. The menu chain Connection >> Send Filter Values To >> [My List web part name] shows
    the dialogue. On the "Choose Connection" tab, I choose "Get Parameter Values From". Clicking the "Configure" button results in the "Configure Connection" tab having the message "The Consumer Web Part did not
    provide schema information".

    Hi Randy,
    You need to change the "MyParam" to "CohortParam", for parameterbinding element we need to add the location attribute as below codeline, then when we use the QueryString "CohortParam" with value in url, it will directly
    filter the list web part items without adding URL Filter web part.
    <ParameterBinding Name="CohortParam" Location="QueryString(CohortParam)" DefaultValue=""/>
    I attached my resutls as below image (also "MyParam" can be changed to "CohortParam" if you want), you can take a look.
    Thanks,
    Daniel Yang
    Forum Support
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Daniel Yang
    TechNet Community Support

  • Passing parameters for a query throught XML and capturing response in the same

    Hi All,
    I have defined a RequestParameters object and i am passing paramerts for a query through XML and trying to capture the result in the same and send back to the source. In this case i am send XML from excel.
    Below is my XML format.
    <?xml version="1.0" encoding="utf-8"?>
    <s:Envelope xmlns:s="http://schemas.xmlsoap.org/soap/envelope/">
    <s:Body xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
    <Insert xmlns="http://tempuri.org/">
    <dataContractValue>
    <dsRequest>
    <dsRequest>
    <SOURCE></SOURCE>
    <ACTION>Insert</ACTION>
    <RequestParams>
    <RequestParams>
    <ACC_NO>52451</ACC_NO>
    <EMP_CITY>HYD</EMP_CITY>
    <EMP_NAME>RAKESH</EMP_NAME>
    <EMP_CONTACT>99664</EMP_CONTACT>
    <EMP_JOM>NOV</EMP_JOM>
    <EMP_SALARY>12345</EMP_SALARY>
    </RequestParams>
    <RequestParams>
    <ACC_NO>52452</ACC_NO>
    <EMP_CITY>HYD</EMP_CITY>
    <EMP_NAME>RAKESH</EMP_NAME>
    <EMP_CONTACT>99664</EMP_CONTACT>
    <EMP_JOM>NOV</EMP_JOM>
    <EMP_SALARY>12345</EMP_SALARY>
    </RequestParams>
    </RequestParams>
    </dsRequest>
    <dsRequest>
    <SOURCE></SOURCE>
    <ACTION>Update</ACTION>
    <RequestParams>
    <RequestParams>
    <ACC_NO>52449</ACC_NO>
    <EMP_CITY>HYD1</EMP_CITY>
    <EMP_NAME>RAKESH1</EMP_NAME>
    <EMP_SALARY>1345</EMP_SALARY>
    </RequestParams>
    <RequestParams>
    <ACC_NO>52450</ACC_NO>
    <EMP_CITY>HYDer</EMP_CITY>
    <EMP_NAME>RAKEH</EMP_NAME>
    <EMP_SALARY>1235</EMP_SALARY>
    </RequestParams>
    </RequestParams>
    </dsRequest>
    </dsRequest>
    </dataContractValue>
    </Insert>
    </s:Body>
    </s:Envelope>
     Where i have a List of dsRequest and RequestParams, where i can send any number of requests for Insert,Update. I have two a XML element defined in RequestParams "RowsEffected","error" where the result will be caputred and is updated
    to the response XML.
    I have 6 defined in RequestParams
    EMP_SALARY(int),ACC_NO(int),EMP_CITY(string),EMP_NAME(string),EMP_CONTACT(string),EMP_JOM(string)
    My Question is:
    When i am trying to build response XML with the following code, the parameters which are not given in the Request XML are also appearing in the Response.
                    ResponseParams.Add(
    newdsResponse()
                        ACTION = OriginalParams[a].ACTION,
                        SOURCE = OriginalParams[a].SOURCE,
                        Manager = OriginalParams[a].Manager,
                        RequestParams = OriginalParams[a].RequestParams
    Where the OriginalParams is dsRequest
    Ex: In my update query i will only send three parameters, but in my response building with ablove code, i am getting all the variables defined as INT in the RequestParameters.
    Is there any way i can avoid this and build response with only the parameters given in the Request ??
    Appreciate ur help..Thanks
    Cronsey.

    Hi Kristin,
    My project is, User will be giving the parameters in the excel, and using VBA, the values are captured and an XML is created in the above mentioned format and is send to web service for the Insert/Update.
    I created a webservice which reads the values from <datacontract> and it consist of list of <dsRequests> where any number of Insert/Upate commands can be executed, with in which it contains a list of <RequestParams> for multiple insertion/Updation.
    //function call
    OriginalParams = generator.Function(query, OriginalParams);
    where OriginalParams is List<dsRequest>
    //inside function
    command.Parameters.Add()// parameters adding
    int
    val = command.ExecuteNonQuery();
    after the execution,an XML element is added for the response part.and it is looped for all the RequestParams.
    OriginalParams[i].Result.Add(
    newResult()
    { ERROR = "No Error",
    ROWS_EFFECTEFD = 1 });
    //once all the execution is done the response building part
    for(inta
    = 0; a < OriginalParams.Count; a++)
                    ResponseParams.Add(
    newdsResponse()
                      Result = OriginalParams[a].Result
    QUEST: When i am trying to build response XML with the following code, the parameters which are not given in the Request XML are also appearing in the Response.
    Ex: In my update query i will only send three parameters, but in my response building with ablove code, i am getting all the variables defined as INT in the RequestParameters.
    Is there any way i can avoid this and build response with only the parameters given in the Request ??
    Appreciate ur help..Thanks
    Cronsey.

  • Pass a variable name to a subroutine and use a method on it...

    How do I pass a variable name to a subroutine and then call a method on it?
    I have several swing text fields in a JForm. When someone enters a string in any of these fields, I want to check whether it is a number and, if now, clear that individual field and display a popup warning.
    So, I want to do something like....
    String stringcheck(String str, sometype variablename) {
            try {
                Integer.parseInt(str);
            } catch (NumberFormatException e) {
                JOptionPane.showMessageDialog(jPanel2, "These fields must be integer numbers.");
                variablename.setText("");
    }

    prometheuzz wrote:
    tsith wrote:
    prometheuzz wrote:
    NickSchurch wrote:
    thanks prometheuzz. I'm returning a string cos there are some other parts to the subroutine.Ah, now I understand.
    Well, good to hear you found a solution to it.You know, you really should have seen that from post 1.
    No offense, but seriously - does he have to draw you a picture?!
    I probably wouldn't understand the picture either: I'm not much of an art critic. Unless the OP is [Bob Ross|http://www.bobross.com/], his paintings, I understand.
    "I'm returning a string 'cos there's a happy tree over there, and I think I'll put a happy rock right here"

Maybe you are looking for