SEcess got vanished during outgoing Excise invocie creation
Hi,
This is Export sales under cliam of rebate scenario
When i create the Outgoing excise invoice in J1iin( F6 - it is export under no bond), All the excise componant values are dispalying, but when i add the document higher secondary Education cess value got vanished, it is only the value not posted in the accounting also.
Kindly suggest me the solution for this,
Welcome to this forum.
This issue was discussed many times. Please search in the link provided with the required text.
[Forum Search|http://forums.sdn.sap.com/search!default.jspa?objID=f246]
thanks
G. Lakshmipathi
Similar Messages
-
Account Entries During outgoing Excise inv creation
Hi All,
When Billing Document is created, Corresponding A/C Entry - (GL A/Cs from VKOA & Tax Codes)
Customer A/C Dr. (Recon GL BS Current Assets)
To Sales A/C (P&L GL Income)
To BED. Recovered A/C / Cenvat Suspense A/C
To E.Cess Recovered A/C / Cenvat Suspense A/C
To S&H E.Cess Recovered A/C / Cenvat Suspense A/C
When BED / E.Cess / S&H E.Cess Recovered A/Cs are used - These are P&L A/Cs & Grouped as Income A/Cs in FS Version.
When Cenvat Suspense A/C is used - It is BS A/C & Grouped in Current Liabilties in FS Version
When Creation of Excise Invoice - (GL A/Cs against ETT - DLFC)
E.D Paid A/C / Cenvat Suspense A/C Dr.
To BED. Payable A/C (BS GL Current Liabilities)
To E.Cess Payable A/C (BS GL Current Liabilities)
To S&H E.cess Payable A/C (BS GL Current Liabilities)
When E.D. Paid A/C (P&L GL - Expenditure)
When Cenvat Suspense A/C (BS GL - Current Liabilities)
in some G/L Account there is '/ " for BS G/L & P&L G/L May I Know why it ????/& in which case we use BS & P&L account???????????Thxxx BSR
We may configure the excise collection in two ways.
1. If we configure cenvat suspense while doing billing document, the same suspense account should be debited while excise invoice generation.
2. If we configure ED recovered a/c while billing document, excise duty(expenses a/c) to be configured to offset while creating excise invoice.
Either way you can follow.
would u pl clarify when should i go for 1 way & when 2???????????. & why there r these two ways?????????
Thxxx once again -
Sales /Outgoing Excise Invoice number Range for J1IIN
Dear Gurus,
We are doing STO from excisable plant 1000 to plant 1100. We created a PO with document type UB ( STO) and created delivery with reference to PO and created billing document ( delivery challan). Against billing document number we created sales excise invoice in J1IIN for financial year starting from 1st April 2010. In J1I9 we have maintained number range for 2010 financial year in object J_1IEXCLOC for respective series group s1.Still when the outgoing excise created, the system continued last financial years number range. In entire flow from PO till MIGO and billing document and creation of excise invoice the input date is 6th of April i.e. current financial year. This is our first sales outgoing excise invoice creation in new financial year for which number range is maintained properly.
My question is why system took last financial years number range even though the date in all the documents is falling in new financial year.
Will appreciate the answer.
Thanx in advance
Regards
NileshRESOLVED
-
INCOMING AND OUTGOING EXCISE INVOICE REQUIREMENT
HI,
My client requires, while doing the Incoming and outgoing excise invocies based on material type traded goods and rawmaterial goods, they want to hit different GL accounts based on the materials(traded and rawmaterial separately). Since
excise transaction type is one, how can we achieve this, Is it possible to do the above requirement. How can we configure different gl's for th same excise transaction type based on the different materials.
Please advice.
Regards
AdityaHi,
The incoming and outgoing exise invoices are not exposed in DI as there are a part of the Indian Localization. So I guess its not possible to create that document with DI API.
Check the following note for a similar thing https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/smb_searchnotes/display.htm?note_langu=E¬e_numm=1078102
Hope it helps,
Vasu Natari. -
Automatic excise invoice creation in STO scenario
Hi All,
This is related to stock transfer from Depot to manufacturing plant.
I have done the replenishment delivery at Depot. Now my requirement is automatic excise invoice creation. For that i have done the required settings like excise and series group. I have checked the Creation EI option in exciser group also.
PO(ME21n) --> VL10B --> VL02N --> VF01 (JEX) --> Automatic excise invoice once save the billing.
Once i sqve the billing, it has to create excise invoice at Depot. It is not happining.
Please let me know if i have to do any more settings.
Regards
LakshmikanthDear Lakki,
Please check, whether for Defined Excise Group:
Path: SPRO --> IMG --> Logistics General --> Tax on Goods Movement --> India --> Basic Settings --> Maintain Excise Group
Select your Excise Group and Mark the Boxes: Create EI, and Box: Depot EIs.
Have you maintained relevant setings, like:
--> Had you checked the Box: Excise Inv during Billing, under Tab: Outgoing Excise Invoice
--> Relevant checks for Depot Settings, under Tab: Depot Settings
Best Regards,
Amit -
SAP-MM CIN Error: JTAX Access sequence missing at the time of excise invoice creation in J1IS
Dear Sir,
During creation of excise invoice with ref to material doc system give a error massage JTAX access sequence is missing. Access sequence and tables are already exist in system.
1.PO
2. GR with excise capture& post here Part-I&II are genarated.
3.Invoice
4.Return delivery with reference to above goods receipt document.(122 m.type)
5. J1IS- Creating outgoing excise invoice w.r.to return delivery material document.
JTAX Access sequence missing at the time of excise invoice creation in J1ISThe same error coming while consignment stock issue to cost center.
1.Consignment Info record with excise tax code.
2.PO consignment purchase order.
3.GR with excise capture & post here Part-I&II documents are created.
Material document created but there is no accounting document.
4.While doing Consignment stock issue to cost center system generate an error message
Access sequence JTAX missing ( ) Message no. VE306" -
Please explain the process for the creation of Outgoing excise Invoice
J1IS
scenerio is: Did GR for 2 quantity and it went for qualtiy inspection then out of which 1 failed in quality and 1 accpeted
so please suggest if we need to do JIEX for 2 quantity and miro also for 2 even though we want to make payment for 1
i want to know the process how it should be done as per the legal or law
Edited by: Sap: IN on Dec 5, 2011 2:10 PMHi,
now I want to understand is it necessary to capture the excise invoice in J1iex for 2 quantity in order to create the outgoing excise invoice since i read some where that we need to refere to the original incoing excise invoice while doing J1IS
If you not capture excise invoice no value will get update for excise then which invoice will you send to along with material ?
If you not create outgoing excise invoice then which excise document will you send with material while returning material,there should be excise invoice document with material if material is excitable
you have to capture excise invoice first then create outgoing excise invoice
See,when you did MIGO user might have select option part1 only or capture excise invoice ,so its better to post excise invoice no in J2IEX,first for 2 qty
now you got info that 1 qty is rejected ,so return qty through movement type 122 and J1IS give material document number of 122 and year
check following path also
Go to SPRO>IMG>Logistics - General>Tax on Goods Movements>India>Business Transactions>Incoming Excise Invoices-->Specify Which Movement Types Involve Excise Invoices and activate the Mvt.type 161 in this transaction
check following link also
[Return to vendor with excise duty..?;
Regards
Kailas Ugale -
Hi all
I have done following setting for auto excise invoice creation
A) Maintain excise group : Checked excise invoice during billing : Check box flaged
B)Define accout in account detrmination : If We create it manually perfectly working
C)business transaction : outgoing excise inovice : add one entry for sale area IN01/01/02 shipping point : INVE & Plant : PVVE ,excise group : EV & excise series ES & export colulm kept blank beacise this domestic sale area
But after creating billing document ( t_code :vf01 doc_typ: F2) excise invoice is not genrated automatically .
Reques you all to suggest why excise inovice is not created ?Hi
You will have to maintain Default Excise Group and Series Group in IMG> LO General>Tax on Goods Movement> India>Business Transaction>Outgoing Excise Invoice>Maintain default Excise Group and Series Group.
Also Maintain the Assign Billing Type to delivery Type. IMG> LO General>Tax on Goods Movement> India>Business Transaction>Outgoing Excise Invoice>Assign Billing Type to delivery Type.
Maintain it and then try to create.
Regards
Amitesh Anand -
Excise invoice creation for Debit Memo or Credit Memo
Dear All,
I have to create Excise Invoice J1IIN with reference to Debit Memo in Differential Invoice Senario.
When i goto J1IIN it shows Customization for Document is missing in table Billing Reference type.
How to create Excise invoice for Order related billing.Plz solve my problem.
Award Pts for useful answers.
Thx & Regards,
PankajCIN Configuration for Excise Invoices in case of RETURNs
Basically CIN is divided in to two types:
1. TAXINJ - Is a Routine Based that is used in the condition types. it will work on the logic what ever is there in the Routine.
2. TAXINN: - Is a condition Record based. Means we have to create condition records for each and every condition type that you are going to use in the Pricing Procedure.
Since Version 4.7 this TAXINN came into picture and start using this.
And one of the important points is since 4.6 c CIN comes a separate package. But after introduction of 4.7 Version, CIN is coming the SAP Package itself and even in the Customer Master Record also we will find the CIN Icon.
Basically 4 types of Pricing Procedures are used in CIN and are as follows:
1.JDEPOT - Depot Sales
2.JEXPOR - Export Sales
3.JFACT - Factory Sales
4.JSTKTR - Stock Transfer
Country Version India comes with four pricing procedures as follows:
JINFAC (Sales from manufacturing plants)
JINEXP (Export sales)
JINDEP (Sales from depots)
JINSTK (Stock transfers
CIN:
IMG > Logistics - General > Tax on Goods Movement > India > Basic Settings >
Maintain Excise Registrations
Use
In this IMG activity, you maintain the data relating to your excise registrations.
Activities
enter each of your excise registrations, specifying a four-character code for each
Excise Registration IDs
In this activity, you maintain excise registration IDs. You create one ID for each of your business's excise registrations.
Activities
For each excise registration in your business create a registration ID, and state:
Which taxes the registration covers (additional excise duty, special excise duty, and cess)
Fields for any taxes that are not covered will be hidden in transactions involving excise duty.
The maximum number of items to be printed on each excise invoice
Whether you are allowed partial CENVAT credits
Maintain Registration ID NUMBER, Excise code number, excise registration number
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
ECC Number
Specifies the organization's ECC number.
Excise Registration Number
A number assigned to each premises or location that has registered as a manufacturer with the excise authorities.
Every entity with an excise registration number is required to keep its own excise books.
Excise range: Specifies the excise range in whose area the excise registration is located.
Excise Division
Specifies the excise division in whose area the excise registration is located.
Excise Collectorate
The code of the excise collectorate in whose area the excise registration is located.
Indicator for confirming AED usage
Additional Excise duty Percentage. These are leviable under the additional duties of excise act. These duties are in addition to basic excise duty and special excise duty.
Example
Additional Excise duty is leviable in case of textile products, tobacco and sugar.
Similarly for SED CESS
Number of Items in Excise Invoice
Shows the maximum number of line items that the authorities allow per excise invoice.
Dependencies
This information is used when you create an excise invoice in Sales and Distribution (SD) for factory sales and for other movements.
This information is used to split the transfer postings' items into multiple subcontracting challans.
Excise register set description
Description of the excise registers set.
Partial CENVAT Credit
Indicates that the excise registration ID is allowed to credit only a portion of its input excise duty to its CENVAT account.
Dependencies
When you post a goods receipt, the system splits the input excise duty on the material into its deductible and nondeductible amounts. It posts the deductible duty to the appropriate CENVAT account, and adds the nondeductible duty to the material value.
This information is also shown when you post the vendor's excise invoice.
Maintain Company Code Settings
Use
In this IMG activity, you maintain the data relating to your company codes.
Document Type for CENVAT Postings
It controls, which document type the system uses when making CENVAT postings in Financial Accounting (FI). Here ED is document type for cenvat posting.
Indicator for providing debit account overwriting
Debit Account Overwrite Indicator. X - Indicates debit accounts can be overwritten. Use In excise journal voucher transaction. It provides the flexibility to the user to enter the debit account of his choice depending on the nature of transaction.
Automatic balance Indicator
Excise year start month
The calendar month marking the beginning of the excise year
Use
this start month represents the month for the start of the excise invoice number range. The month 04 is entered here indicating April of the calendar year as the start month for excise invoices. Any change by the Excise authorities regarding start month should be taken care of by an entry in this field and initialization.
Excise invoice selection procedure
Excise invoice selection type. To indicate the method opted by the company for selecting the excise invoice. It can be either earliest or latest invoices that were received.
Number of excise invoices to be selected
indicates the number of excise invoices that needs to be selected in the excise invoice selection.
Days to be considered for excise invoice selection
Number of days from document date for excise invoice selection.
Example
If the value of this field is 20 and today is 28-03-97. The excise
invoice selection will show the related invoices only for the
period 08-03-97 to 28-03-97.
Document type for TDS FI posting
Financial accounting document type for TDS posting.
Document type for FI posting on Utilization
Financial accounting document type for TDS posting.
Indicator for item level excise duty round off
This indicator is to be used for deciding whether Item level excise duty amount rounding off is required during procurement cycle. If marked 'X' then the excise duty amount will be rounded off to the nearest rupee at the Purchase order level. This will not round off the CENVAT credit to be taken. If the duty amount is less than one rupee then no rounding is done
Rounding off of Excise duty for outgoing excise invoice
You can round off the Excise amount to be paid during an outgoing Excise invoice by marking this indicator as 'X'. The rounding is done at the item level for each item where the amount is greater than 1 Rupee.
Immediate Credit on Capital Goods
Instructs the system, when you verify a goods receipt for capital goods, to immediately post half of the input excise duty to the appropriate CENVAT accounts.
The rest is posted the CENVAT on hold account, for use in the following year.
CVD Clearing Account
Specifies which G/L account the system credits when you take a CENVAT credit on countervailing duty in the Incoming Excise Invoices transaction.
Exchange rate type
Key representing a type of exchange rate in the system.
Use
You enter the exchange rate type to store different exchange rates.
Example
You can use the exchange rate type to define a buying rate, selling rate, or average rate for translating foreign currency amounts. You can use the average rate for the currency translation, and the bank buying and selling rates for valuation of foreign currency amounts.
Exchange rate type to be used for Export excise duty converts
When you are creating an Excise invoice for export sales then the exchange rate for duty calculation will be picked up using this Exchange rate type.
Maintain Plant Settings
Use
In this IMG activity, you maintain excise information relating to your plants.
Plant Settings
In this activity, you maintain excise information relating to your plants.
Activities
For each plant:
Specify whether it is a manufacturing site or a depot.
Assign it an excise registration ID.
You can assign the same ID to more than one plant, if required.
Depot
indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
Number of goods receipt per excise invoice.
Multiple GR for one excise invoice, Single credit
Multiple GR for one excise invoice, multiple credits
Maintain Excise Groups
Use
In this IMG activity, you define your excise groups. For each excise group, you can also control how various excise invoice transactions will work.
Excise Groups
In this activity, you define excise groups. An excise group allows you to maintain a separate set of excise registers and excise accounts. The RG 23A, RG 23C and PLA serial numbers are created for an excise group.
Recommendation
Under normal circumstances, excise authorities require every business to maintain only one set of excise registers and one set of accounts. But through exemption from the authorities, multiple books can be maintained.
If your company has only one set of excise registers, then you need to maintain only one excise group.
Activities
1. Create one excise group for each set of registers that you need to keep.
1. Assign the excise groups to plants.
2. Maintain whether this Excise group is for a depot or not.
3. If you receive only one consignment for an Excise challan then you can leave GR's per EI as blank. If you receive multiple GR's for a given Excise challan and would like to avail multiple credit mark the GRs per EI as 'Multiple GR's for one excise invoice, multiple credit'. Alternatively if you want to avail the credit only after all the goods receipts have been made mark it as ' Multiple GR for one excise invoice, single credit'.
4. If you want to automatically create Excise invoice during Sales cycle at the time of billing the tick the indicator 'Create EI'
5. During depot sales if you do not want to do RG23D selection and posting separately and would like to complete RG23D selection in one step mark the indicator 'RG23D Auto post'. This will post the selected records into RG23D automatically. You cannot cancel the selection later.
6. If the indicator 'Default GR qty' is marked system will default the Excise challan quantity on to the Goods receipt if the Excise invoice number is given in the pop-up.
7. If the indicator 'Folio no creates' is marked system will generate Folio numbers for RG23D during receipt of excise invoice into depot.
8. 'Automatic posting' when ticked will post the Excise invoice other movements automatically along with creation in single step.
9. 'Create Part1 for Block Stock' when marked will create a Part1 during the receipt of material into Blocked stock.
10. 'Create Part1 for STO' when marked will create a Part1 during the receipt of material through inter plant transfers.
11. 'Create Part1 for consumption stock' when marked will create a Part1 during the receipt of material into consumption stock.
Excise Group
Governs which set of excise registers a business transaction will be included in.
Following is the relation between excise group, plant and registration.
Dependencies
In define excise groups in Customizing.
Then, in transactions involving excise duty, for example, when you post a vendor's excise invoice, you specify which excise group you are using. This information tells the system which G/L accounts to post the excise to.
At the end of the period, when you come to prepare your excise registers, you create different sets for each excise group.
Indicates that the plant in question is a depot.
Dependencies
Depots are required to prepare register RG 23D, and follow different procedures for goods receipt and invoice generation.
GR Per Excise Invoice
Multiple GR for one excise invoice , Multiple credit
Multiple GR for one excise invoice , Single Credit
Create Excise Invoice Automatically
Instructs the system to automatically create a Sales and Distribution (SD) excise invoice immediately you create a commercial invoice or a pro forma invoice.
The excise invoice is created in the background.
Dependencies
If you want to make use of this function, you must also define the default plant, excise group, and series groups in Customizing for Sales and Distribution (SD), by choosing Excise Group - Series Group Determination.
RG23D Sales Creation and posting option
RG23D Automatic Option if selected will create Depot excise invoice by posting the selection of excise invoices in single step.
If this is not selected then you need to separately do RG23D selection followed by PGI and then RG23D verification and posting.
If you need automatic posting of RG23D selection then the Post Goods Issue should have been completed before running RG23D selection.
Default excise qty in GR
If this indicator is ticked then while doing Goods Receipt using 'MB01' system will default the excise invoice quantity on to the Goods receipt document.
Folio number for depo
Posting
If this indicator is marked then while creating Excise invoice for other movements system automatically does the Verify and Post. You need not separately Post the excise invoice
Also we can set indicator for creation of part 1 for:
Blocked stock
Stock transport order
Consignment stock
Maintain Series Groups
Use
In this IMG activity, you define the different excise series groups within your company. Series groups allow you to maintain multiple number ranges for the outgoing excise documents.
Based on excise regulations and exemptions from the authorities you can maintain multiple number series for outgoing documents. But each of these series has to be declared to the excise authorities.
Activities
Define excise series groups based on type of outgoing document
Assign series group to excise registration ID
If no financial postings are required for an Excise invoice in this seris group then you tick the 'No utilization' indicator.
If the CENVAT has to be paid immediately and you need not wait for the Fort nightly payment then mark the 'Immediate Utilization' indicator.
Example
You could define two series groups, group 001 for excise invoices, and group 002 for 57 F4 documents.
No account postings for CENVAT in sales cycle
No utilization Flag
If you do not need any CENVAT utilization for an excise invoice but would like to just generate an excise invoice then you need to mark this indicator.
IF the flag is checked then system will create an Excise invoice in the given Series group but there will not be any account postings or Part2 postings.
Immediate Utilization of CENVAT
Specifies that when you create an excise invoice, the system immediately pays the amount from CENVAT and creates the Part II entry. Such invoices will not be listed for fortnightly utilization.
If you have both fortnightly and immediate utilization for the same excise group, the account determination within CIN IMG should point to the ED interim account.
Account determination for immediate payment will be done exactly the same as being done for fortnightly utilization program.
Maintain Excise Duty Indicators
Use
In this IMG activity; you maintain the excise duty indicators.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Select Tax Calculation Procedure
Use
In this IMG activity, you specify which tax procedure you want to use for determining excise duties and sales taxes on input materials in India.
If you use condition-based excise determination, use a copy of the tax procedure TAXINN.
If you use formula-based excise determination, use a copy of the tax procedure TAXINJ.
This tax procedure also supports condition-based excise determination, so that you can work with both concurrently.
We strongly recommend that new customers use condition-based excise determination. Note that once you have started using a tax procedure, you cannot switch to another one, otherwise you will not be able to display old documents.
Maintain Excise Defaults
Use
In this IMG activity, you define which tax procedure and pricing condition types are used in calculating excise taxes using formula-based excise determination.
Activities
If you use condition-based excise determination, fill out the CVD cond. field and leave all the others blank.
If you use formula-based excise determination, fill out all of the fields as follows:
Enter the tax procedure and the pricing conditions that are relevant for excise tax processing.
Specify the purchasing and sales conditions types used for basic excise duty, additional excise duty, special excise duty, and cess.
Specify the conditions in the sales order that are used for excise rates.
Specify the countervailing duty condition type used for import purchase orders.
See also
SAP Library -> Logistics -> Country Versions -> Asia-Pacific -> India -> Materials Management (MM) -> Condition-Based Excise Determination and -> Formula-Based Excise Determination.
IMG > Logistics - General > Tax On Goods Movement > India > Basic Settings > Determination of Excise Duty >
Condition-Based Excise Determination
Use
When you enter a purchasing document, for example, a purchase order, the R/3 System automatically calculates the applicable excise duties using the condition technique.
Features
The standard system comes with two tax calculation procedures. TAXINN is only supports condition-based excise determination, whereas TAXINJ supports condition-based excise determination and formula-based excise determination. Both tax procedures contain condition types that cover all of the excise duties and sales taxes applicable.
Since the exact rates of excise duty can vary on a large number of factors, such as which vendor you purchase a material from, or which chapter ID the vendor stocks the material under, you create condition records for every sort of excise duty.
When you come to enter a purchasing document, the system applies the excise duty at the rates you have entered in the condition records.
Activities
Customizing
IndiaMake for Logistics General, by choosing Taxes on Goodsthe settings in Customizing Basic Excise Duties Using Condition Technique and Movements Account Settings Determination.
These activities include one activity where you define a tax code for condition-based excise determination.
Master Data
Create condition records for all excise duties that apply, and enter the tax code for condition-based excise determination in each.
Day-to-Day Activities
When you enter a purchase order or other purchasing document, enter the tax code for condition-based excise determination in each line item. The system then calculates the excise duties using the condition records you have created.
When the ordered materials arrive, you post the goods receipt and the excise invoice. The system posts the excise duty to the appropriate accounts for deductible input taxes when you enter the excise invoice.
Creating Condition Records for Excise Duty
1. In the command field, enter FV11 and choose .
2. Enter the condition type that you want to create a condition record for and choose .
The Key Combination dialog box appears.
3. Select the combination of objects that you want to create the condition record for.
On the dialog box, Control Code means "chapter ID."
So, for example, to create a condition record for a tax that applies to a combination of country, plant, and chapter ID, select Country/Plant/Control Code.
4. Choose.
5. Enter data as required.
In the Tax Code field, enter the dummy tax code that you have defined.
6. Save the condition record.
Formula-Based Excise Determination
Use
When you execute a business transaction involving materials that are subject to excise duty, the system automatically calculates the duty for you.
Prerequisites
In order for the system to be able to determine which rate of excise duty to apply, you must have maintained all the data on the Maintenance screen, which you can MasterExcise Rate access from the SAP Easy Access screen by choosing Indirect Taxes Excise Rate Maintenance.Data
You maintain the following types of data:
Plant master data
You assign each of your plants an excise duty indicator. You can use the same indicator for all the plants with the same excise status from a legal point of view, such as all those that are in an exempt zone.
See also the information about manufacturers that are only entitled to deduct a certain portion of the duty (see Partial CENVAT Credit).
Vendor master data
For each of your vendors with the same excise status from a legal perspective, you define an excise duty indicator. You must also specify the vendor type for example, whether the vendor is a manufacturer, a depot, or a first-stage dealer. You must also stipulate if the vendor qualifies as a small-scale industry.
For each permutation of plant indicator and vendor indicator, you then create a final excise duty indicator.
Customer master data
similarly, you assign the same excise duty indicator to each of your customers that share the same legal excise status.
Again, for each permutation of plant indicator and customer indicator, you then create a final excise duty indicator.
Material master data
each material is assigned a chapter ID.
Excise tax rate
For every chapter ID and final excise duty indicator, you maintain the rate of excise duty.
If your business only qualifies for partial CENVAT credit, you must customize your system accordingly.
Activities
Let us consider an example to illustrate how the system determines which rate of excise duty to apply to a material. Assume you are posting a sale of ball bearings to a customer. The system automatically determines the rate of excise duty as follows:
1. Looks up the customer master data to see what status you have assigned the customer.
Let's assume you've assigned the customer status 3.
2. Looks up the plant master data to see what status you have assigned the plant.
Similarly, your plant has status 2.
3. The system looks up the table under Excise Indicator for Plant and Customer to see what the final excise duty indictor is for customer status 3 and plant status 2: It is 7.
4. The system determines the chapter ID of the ball bearing for the plant.
Lets assume the chapter ID at plant for the ball bearings is 1000.01.
5. Finally, the system looks up the table under Excise Tax Rate to see what rate of duty applies to chapter ID 1000.01 under status 7.
Define Tax Code for Purchasing Documents
Use: In this IMG activity, you define a tax code for the purposes of calculating excise duty when you enter purchasing documents.
Only carry out this activity if you use condition-based excise determination.
Activities: Create a new tax code, and set the tax code type to V (input tax). Do not make any other settings for it.
Assign Tax Code to Company Codes
Use
In this IMG activity, assign the tax code for purchasing documents to the company codes where it will be used.
Only carry out this activity if you use condition-based excise determination.
Classify Condition Types
Use
In this IMG activity, you specify which condition types you use for which sort of tax. Note that this only applies to condition types that you use with the new excise determination method.
The system uses this information when you create a document from another one. For example, when you enter an incoming excise invoice from a purchase order, or when you create an outgoing excise invoice from a sales order, the system determines the various excise duties in the excise invoice using the information that you have entered here.
In addition, when you create a purchasing document, the system only uses the condition types that you enter here.
For taxes on purchases, use the condition types contained in the tax procedure.
For taxes on sales, use the condition types contained in the pricing procedures.
Standard settings
The standard system comes with sample settings for the tax calculation procedures and pricing procedures.
Use these settings as a basis for your own.
IMG > Logistics - General > Tax on Goods Movement > India > Account Determination
Define G/L Accounts for Taxes
Use
In this IMG activity, you specify which G/L accounts you will use to record which taxes.
Requirements
you have set up G/L accounts for each of the processing keys listed below.
Activities
Assign an account to each of the following posting keys. The accounts for VS1, VS2, and VS3 are used as clearing accounts during excise invoice verification.
VS1 (basic excise duty)
VS2 (additional excise duty)
VS3 (special excise duty)
VS5 (sales tax setoff)
MWS (central sales tax)
MW3 (local sales tax)
ESA (service tax)
ESE (service tax expense)
Specify Excise Accounts per Excise Transaction
Use
In this IMG activity, you specify which excise accounts (for excise duty and CENVAT) are to be posted to for the various transaction types. Enter all the accounts that are affected by each transaction type.
If you use sub transaction types, enter the accounts for each sub transaction type as well.
Activities
Transaction type UTLZ is used for determining accounts only while posting excise JVs and also if the payment of excise duty has to be done fortnightly.
The fortnightly CENVAT payment utility picks up the credit side accounts from the transaction types of GRPO, EWPO, and TR6C for determining the CENVAT and PLA accounts. There is no separate transaction type for fortnightly payment.
Example
Excise TT DC ind Account name
GRPO CR CENVAT clearing account
GRPO CR RG 23 BED account
GRPO DR CENVAT on hld account
Specify G/L Accounts per Excise Transaction
Use
In this IMG activity, you assign the excise and CENVAT accounts to G/L accounts.
When you come to execute the various transactions, the system determines which G/L accounts to post to by looking at the:
Excise group
Company code
Chart of accounts
Furthermore, if you want separate account determination settings within an excise group, you can also use sub transaction types.
Requirements
You have already:
Defined the G/L accounts
Defined the excise groups
Maintained the transaction accounts
Activities
For each excise group, assign the excise and CENVAT accounts to G/L accounts. For most businesses, one set of accounts will suffice for all transactions.
Note
You need not remit the CENVAT to the excise department immediately, so maintain the credit account for transaction type DLFC as an excise duty interim account. This will be set off when you remit the duty.
Config setting needed to be done in order to get the Excise Details Screen in Material Master.
Even though this functionality is available in enterprise version, a small config step has to be made in Screen Sequences for Material Master.
Following document helps you to do this configuration.
Logistics General 1. Go to IMG Define Structure ofData ScreenMaterial Master Configuring the Material master Screen Sequence.for each
2. Select your screen sequence. Usually it would be 21. Select the same and click on Data Screen in the left frame.
3. Once the data screens are exhibited, select data screen no. 15, ie. SSq. 21and Scrn 15, which is Foreign Trade: Import Data. Select the same and click on Subscreens in the left frame.
4. Go to the last sub screen i.e. 21-15-6 - SAPLMGD1- 0001 and select the same. Click on tab view subscreen and ensure that the subscreen is blank.
5. Now in the last sub screen i.e. no.6 you delete SAPLMGD1 0001 and instead add SAPLJ1I_MATERIAL_MASTER and in the screen no. 2205.
6. Save the setting.
7. Create a Material Master and check whether in Screen Foreign Trade Import, Excise related subscreen appears.
Transaction
Action
J1I2
Prepare a sales tax register
J1I3
Create outgoing excise invoices in batches
J1I5
Update the RG 1 and Part I registers
J1IEX
Incoming Excise Invoices (central transaction)
J1IEX_C
Capture an incoming excise invoice (excise clerk)
J1IEX_P
Post an incoming excise invoice (excise supervisor)
J1IF01
Create a subcontracting challan
J1IF11
Change a subcontracting challan
J1IF12
Display a subcontracting challan
J1IF13
Complete, reverse, or recredit a subcontracting challan
J1IFQ
Reconcile quantities for subcontracting challans
J1IFR
List subcontracting challans
J1IH
Make a CENVAT adjustment posting
J1IIN
Create an outgoing excise invoice
J1IJ
Assign excise invoices to a delivery for sales from depots
J1INJV
Adjust withholding tax Item
J1INREP
Reprint a withholding tax certificate for a vendor
J1IQ
Year-End Income Tax Depreciation Report
J1IR
Download register data
J1IS
Process an excise invoice (outgoing) for other movements
J1IU
Process exemption forms
J1IW
Verify and post an incoming excise invoice
J1IX
Create an incoming excise invoice (without reference to purchase order)
J2I8
Transfer excise duty to CENVAT account
J2IU
Remit excise duty fortnightly
J2I9
Monthly CENVAT return
J1IG
Excise invoice entry at depot
J1IGA
Create additional excise entry at depot
J2I5
Extract data for excise registers
J2I6
Print excise registers
rewards if it helps -
Excise Invoice creation error -Billing document does not exists
Dear Experts,
I have created supplementary sales order, billing with refernece through sales order by VF01.
Now I want to create Excise Invoice but system gives error Billing Document does not exists
I have checked billing document in VBRK table & it is showing in table.
My item categroy is L2N -and set it to C
I have assigned Billing type under Outgoing excise invoice ->Assign billing type to delivery type still my excise invoice is not generating.
Pl. guide me.
Thanks
TruptiResolved my problem.
Actually in Billing item categroy if you put SD Doc. Catg. as M you can do excise invoice even if you have not created the
outbound delivery.
So cycle will be Supplementary Sales Order->VF01 with ref. to SO->J1IIN -Excise invoice creation.
Thanks to all.
Trupti. -
Error in excise invoice creation for differncial price invoice
Dear all,
When i am going to create outgoing excise invoice for differncial price invoice
i am having the error - "Reference document of 10006893 is not delivery document
Message no. 8I681"
Can somebody give me solution where to make settings in configration or else.
ArchanaKindly refer following SAP Note
Note 1251126 - Excise Invoice created for Billing document wrt Sales order
Symptom as suggested by the above SAP Note is:
In the scenario where billing document is created with reference to the Sales order, the reference document for billing document is not delivery and it is possible to create multiple billing documents wrt the same Sales Order.
In such a case, the excise invoice should not be allowed to be created with respect to such a billing document through the transaction J1IIN.
However, current the system is allowing excise invoice to be created wrt the first billing document for the sales order and then for the subsequent billing documents, the following error message is displayed - Modvat utilization done message no 8I 446. This is incorrect.
This note contains the corrections for not allowing the creation of the excise invoice for these billing documents.
Hope it assist your cause.
Thanks & Regards
JP -
Regarding Outgoing Excise Invoice
Dear All,
I have a problem for eg. My Client has made a GRN of 100 Quantities and from this GRN he has made the A/P Inovice.
Now after 3-4 days he does the Quality Check of the Stock received.
Now during the Quality Check some items gets rejected For eg 20 quantities gets rejected.
So my client issues A/P credit Memo / Debit Note to the Vendor. But the Problem is, my client cannot make Outgoing excise invoice for the Rejected 20 quantities for this AP Credit Memo.
Please do help and guide me in this matter. How can i make Outgoing Excise invoice from the AP Credit Memo itself.
Regards
Hitesh ParsawalaDear,
But when i create a debit note and then goto to the copyfrom icon i cannot see Outgoing Excise invoice.
As u have written that Outgoing Excise invoice will be created automatically can u plz guide me in this matter.
So u mean to say that the Outgoing Excise invoice for the rejected quantity will be created automatically from the debit note without making any entry in the outgoing excise invoice template.
In which patch of SAP it is possible.
Regards
Hitesh Parsawala -
Outgoing excise invoice doc no series
Dear All
My scenario is as follows.
A)After manufacturing of goods I am sending the Finished goods to my branch office/depot which is out side the state in following ways.
1. I am doing one stock transfer.
2. an outgoing excise invoice.
From branch office/depot we are selling the finished goods with vat or cst. Sometimes Finished goods are comming back from depot due to quality or some other reason. here My problem starts.....
as this is excisable goods how I will take cenvat credit. how to do a incomming excise invoice based on stock transfer.I am using sap 2007B PL-17.
B)After manufacturing of goods I am sending the Finished goods to my branch office/depot which is out side the state in following ways.
1. I am doing one stock transfer.
2. an outgoing excise invoice.
The problem with doc series no case 1: when we will sale excise goods to customer then an outgoingexcisable invoice & a/r invoice will be created and doc no is also generated where case 2:if goods transfer from fatcory to branch then an stock transfer and outgoingexcisable invoice is created, here there is problem at doc no series,client is using same doc no series for A/R invoice and outgoing excise invoice so if assign same in doc numbering but when in case of 1 & 2 there cannot be continous no for outgoing because u will rasie outgoing invoice for both sales & tranfer,but a/r invoice will raasie only for sale to customer then a number diff will come between outgoing inovice & a/r invoice.Even I suggest client to create two doc no series for outgoing invoice one is sale to customer other transfer to branch.
So can anybody pls give solution.
Regards
M AudityaHi,
1. You Manufacture goods at your factory
2. These goods are transferred to the Branch office. Here a STN ( stock Transfer Note) is created and an outgoing Excise is created where you need to take the To Warehouse to be the branch Office
3. For this you correspondingly create the Incoming Excise invoice by taking the From warehouse as Factory. Here the Cenvat credit is recorded and correspondingly the RG registers are updated.
4. Suppose the Branch Office returns the goods then again a STN is created for which the Outgoing Excise is to be created first having to warehouse as Factory and IEI where the from warehouse to be Branch office. Here again the RG registers will getr updated and Cenvat credits will get reversed.
Now as far as the Documnet Numbering Series is concerned .......the OEI and the IEI creation will have to be created whenever STN and A/R Invoices are created. Please note that you need create the OEI and the IEI for an item only once . If you have transferred goods from Factory to Branch office then the OEI and the IEI created here will be enough ....you need not create the OEI again while invoicing to the final customer from the Branch office.
What it effectively means is that since you are creating the Excise invoices ( OEI and the IEI) based on both ST and Direct Invoices ( Directly invoicing to the customer from factory) the OEI series and the A/R invoice series will never be the same.
J Nagesh -
Outgoing Excise Invoice Tax Calculation
Hi Experts,
My client charges excise during the incoming excise invoice but while entering outgoing excise invoice he only charges VAT 4%. I have defined a tax code with bed0%, ecess0% n Hcess 0% n VAT 4%. I am getting the correct tax amount (i.e only VAT 4% is calculated) in the outgoing excise invoice. But while saving the document there is an error message "DOCUMENT ADDED WITH EMPTY JOURNAL ENTRY" and the document is not added i.e it is not saved. What could be the problem.
I am using SAP 2007 B
Thanks in advanceHi,
Apply only VAT 4 % formula not combination having bed0%, ecess0% n Hcess 0% and VAT.
If you have selected excisable warehouse in transaction then that check box is ticked for that item.
and when you will select non excisable warehouse for that item then that check box is not ticked for that item.
Create Delivery Document, go to form setting display the excisable check box in row
select any excisable item and select non-excisable warehouse for that item
then create the A/R invoice.It will give you correct results,
Hope this HElps
Regards,
Neetu -
Customer sales return - excise inv creation issue
Dear expert,
We are testing the "Customer sales Return" scenario for one of our client. Our process is,
1. Create sales return order (VA01) with ref or without reference
2. Create return delivery (VL01N)
3. Perform Post goods Receipt (VL02N)
4. Create Credit Note (VF01) - Here in this case we are differ. We are creating the "Credit Note" with reference to return delivery not with ref to sales return order
Since we planned to create the credit note with reference to "Return delivery", we have defined the CIN related customizing as "Assign Billing Types to Delivery Types".
Then we tried to create the excise Invoice using Transaction J1IIN. But we are getting the error message as
Billing document 3134000001 does not exist
Message no. 8I422
Kindly give your suggestion to overcome this issue.
Warm Regards,
NagDear Experts,
Thanks for your quick response.
Yes, already we maintained the billing relevance field in item category maintained as "A" & Copy contorl in VTFL also. Due to this we can able to create the "credit Note" in Transaction VF01. But during excise Invoice creation only we are facing the above mentioned issue.
Feedback for the response from SDL:-
Yes, we came to know that, for customer sales return process we need to raise a JV only not the excise invoice creation in J1IIN. But we are in the assumption that, this scenario is applicable of we are creating the "Credit Note" with reference to return sales order.
But in our case, we are creating the "Credit Note" with reference to "Return delivery". Since delivery is involved in the process we are in the assumption that we can able to create the excise invoice using J1IIN after maintaining the configuration in the "Assign Billing Types to Delivery Types" area.
Please give your valuable feedback on this.
Warm Regards,
Nag
Maybe you are looking for
-
"logon time" between USR41 and security audit log
Dear colleagues, I got a following question from customer for security audit reason. > 'Logon date' and 'Logon time' values stored in table USR41 are exactly same as > logon history of Security Audit Log(Tr-cd:SM20)? Table:USR41 saves 'logon date' a
-
How do I get water marks off of my phone case screen?
I recently bought an iPhone 5 case from t mobile and I tried wiping the screen down with some water and drying it off because is was dirty. When it dried and I put it on my phone, there were there little purple shiny marks on the case screen so I tho
-
Hold and Post Invoice with Same Reference
Hi, We have activated the check for duplicate invoices. Now, we hold an invoice with reference 123 in MIRO. Then, we click on worklist and open the held invoice and post it. But the system throws a duplicate invoice error. Why is the system checkin
-
When I try to open my itunes all i get is the license agreement
I clicked on agree. then try to open it and the license agreement keeps coming back. help?
-
dear masters, i have to replicate campaign ID from the crm order header, to the ECC order document, but the "campaign ID" field is missing. due to I need this replication to make a report about how many orders are made for each campaign with BI, i c