Second Airport Express and NAS

Hi!
I have an Airport Express connected to the internet and I´d like to buy a second Airport Express to connect to my NAS. I didn´t find a precise information about it. I asked the "genius" and he told me to buy an timecapsule, but doesn´t make sense to me. Anyone had the same problem? Thank you!

Hi,
Sorry, but you have already a NAS and you want to connect it or you need one?
When the NAS is near to the Airport, you can buy a Network Switch and so you can connect more Devices..
Regards,

Similar Messages

Best way to set up homesharing via airport express and NAS

Hi,
I've just bought an Airport express and was wondering what the best way to set it up would be so that I can play music stored on my NAS, controlled by my iphone / ipad. I have itunes match as well, and don't want my phone to be streaming the music from wherever. The airport express will be wired via ethernet to the same router as the NAS on which everything is stored. I don't want the problem with network dropouts and hammering the bandwidth and battery on my iphone to deal with.
How can I set it up to be taking the music straight from the NAS rather than streaming it. I'd also rather not have to turn off itunes match everytime, because it takes an age to repopulate the library when I turn it back on.
Thanks,
Dom

You cannot use homesharing to play content from anywhere but iTunes on a computer. The content doesn't have to be on that computer but it has to be part of the iTunes library on your computer. In addition the computer has to be on with iTunes running.
It doesn't matter what sonos can do, sonos is a lame duck in comparison to iTunes because iTunes gives you many features sonos can't, all because it doesn't use iTunes and homesharing.

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

I have a second generation airport express and i cant manage to extend my wifi

I have a second generation airport express and i cant manage to extend my wifi

So im going to need another airport express to extend my wifi wireless
That is correct.
One AirPort will connect to your router with a short Ethernet cable and be configured to "create" a wireless network.
The second AirPort will be configured to "extend" a wireless network.

How do I install a new airport express and link a second airport express to extend the network of the first airport express?

I currently have a linksys wireless router attached to the Internet. I have an A1264 Airport Express connected by Ethernet to the linksys router. I have two network names, one for each wireless network.
I purchased a new A1392 Airport Express to replace the linksys router and join to the A1264 Airport Express, and I want to have one network name as a result.
How do I do this? I realize that I have to reconfigure the A1264 device so that it is an extension of the A1392 device.

You have a fairly complicated set up, so I suggest that it would make sense to tackle things in stages, testing each stage as you go, before proceding to the next stage.
Stage 1 would be setting up the A1392 first to the cable modem, and then making sure that everything is working correctly on the A1392 Express
Stage 2 would be adding the Netgear switch and testing each port with a laptop connected via Ethernet to make sure that everything is operational on the switch
Stage 3 would be connecting the A1264 Express and testing to make sure that it is extending the network correctly
Stage 4 would be adding other Ethernet devices to the Netgear switch and testing each one at a time before adding the next device. There is some question about whether an iOS device can print to an Ethernet connected printer....even if the printer is AirPrint compatible. You may need to connect the HP using wireless...not Ethernet....to gain full AirPrint functionality, or use another application that will allow printing like Printopia or Print Central using the Ethernet connection on the HP.
Stage 5 would be adding the printer to the A1264 AirPort Express.
You do not mention how the printer will connect to the A1264 Express, but I assume that it will be USB from your description. Most printers will work, but you really will not know if your printer will work until you try.
Remember that only printing will be supported at the USB port of the Express. If you have an all-in-one type device, scan, maintenance, and other advanced features will not be operational whent the device is connected to the AirPort Express.
If you want to print from an iOS device like an iPad or iPhone, plan to add additonal software like Printopia or Print Central to possibly allow this function. There are no guarantees here as far as the iOS devices.

Airport Express and BT Homehub - how can I get it to work?

Hello, can someone help??
I have an Airport Express and a MacBook. My only use for my Airport Express is purely to play ITunes music through my stereo via my MacBook wirelessly. Therefore I only require my Airport Express to join my current network.
I recently changed my phone and broadband network provider from Talk Talk back to BT. My Airport Express worked fine when I was with Talk Talk, I was using a Belkin wireless router for my network connection which worked without any problems. When I got my Airport Express, it was easy to set up - it joined my Talk Talk network without a hitch.
When my connection transferred to BT last week, I tried to connect up my Airport Express to my new BT Homehub. However when I went into Airport Utility my AX wasn't there. So, I read the guide on the Apple Support site and reset it to factory settings. This then seemed to make it 'appear' in Airport Utility, so I went through the process of setting it up as I did when I first bought it. When I got through to the final stage when it is 'Updated successfully and is now re-starting', the AX icon seems to disappear from the left hand side of the box and eventually I get an error message stating 'Airport Utility was unable to find your Apple wireless device after reinstating: The settings for this apple device have been successfully updated but there was a problem re-joining the wireless network or finding the apple wireless device. You may need to select your network from the airport menu and try again' (Incidentally, this last piece of advice doesn't work)... So, I am not sure what to do. I have tried changing the format of the WEP code I need to enter by adding " in front of the code as well as $ as is the suggestion on the Apple Support site...
Is my AX faulty? Is my BT Homehub (The 'next generation of router' as BT call it) preventing my AX from joining my network?? If anyone can help I would appreciate it, I am not very clued up on these things.... :o)
Thanks

I have now managed to get AX working on my BT home hub. I took my second non-working unit back to Apple in Solihull and got them to test it in store. They agreed it wasn't working. They then tested another unit in store and that did work so I brought that home. It would be worth you doing the same as I got a 10% discount off my next purchase of anything at Apple for my troubles.
I set my homehub security to None (from WEP - in homehub manager/advanced/wireless/security), plugged in my AX to homehub using an ethernet cable, then ran Airport utility and after a couple of runs it finally picked it up. I was able to set the configurations I wanted and 24 hours later it is still working. I set my homehub security settings back to WEP as soon as the AX was configured.
I also installed airport utility on my son's windows laptop and that is now able to print wirelessly as well. So, finally a result.
I would suggest you take your unit back to where you bought it from and get them to test it. If they offer you another one ask for a Mac genius
to test it in store for you first. Also ask them to run through the installation procedure with you. Don't forget to ask for something for your troubles:)
Hope that helps,

How do I know "Roaming Network" is working with Airport Express and Airport Extreme and should I use extended wireless network for third Express?

Attempting to eliminate a dead spot in Wifi coverage [and implement AirPlay] have one Airport Extreme 802.11n and two Airport Express 802.11n's.
http://support.apple.com/kb/HT4145
The Airport Extreme is of course connected to cable modem and Ethernet switch, and one Airport Express is connected to the Ethernet network. As per instructions for creating a "Roaming Network", Airport Express is set to same SSID, security type, and Password.
Questions:
1. How does the client device know which Airport to connect to? In other words, will it switch to the closer WiFi transmitter automatically? The WiFi reception problem is intermittent in the fringe areas so what I do not want it for it to stick with the more distant Airport Extreme in the basement when the Airport Express which is closer will work better.
2. How can I tell which of the Airports the attached client device is using?
The third Airport Express will be in a third location - I was planning on using it also for expanding coverage but after reading the warnings about performance suffering when purely using WiFi for the expansion in this location ("Wireless Extended Network" without an ethernet connection) I have figured that the single wired Airport Express will be adequate and will use the third Express to do Airplay only.
http://support.apple.com/kb/HT4259
Question: Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
Mitch

1. How does the client device know which Airport to connect to?
The Mac computer will automatically connect to the wireless access point with the strongest signal...which is probably the closest AirPort. An iPhone or iPad may not do this and will tend to stay connected to one AirPort.
2. How can I tell which of the Airports the attached client device is using?
On a Mac, open Macintosh HD > Applications > Utilities > AirPort Utility. Click on one of AirPorts. In the area to the right, locate the AirPort ID and jot that down. Then do the same for your other AirPort.
Move your Mac near one of the AirPorts and log on to the wireless. Hold down the option key on the Mac while you click the fan shaped AirPort icon at the top of the screen. Look for the BSSID. That is the AirPort ID of the device to which you are connected.
If you are close to the "remote" AirPort, and you see the AIrPort ID of the "main" router when you are testing, then you know that the network is not configured correctly.
Can I use this second Airport Express to extend the wireless network via "Extended Wireless Network" while the other two are in "Roaming Netowrk" configuration? Without bogging down??
There will be a modest 10-15% bandwidth loss with the "extend" setup, assuming that the Express is located where it can receive a strong wireless signal from the AirPort to which it is associated. You can avoid the bandwidth loss if the Express is also connected via Ethernet as part of the roaming configuration.

How do I add a second Airport Express for Airtunes only?

I already have one Airport Express hooked up to my G5 for wireless internet. Works just fine. How, in simple english, do I add a second Airport Express to my downstairs stereo fot playing my iTunes music through.
I have looked through the help sections, but it all comes across too complicated sounding. It can't be that hard.
What do I do to set it up & NOT screw up my already working internet conection?
I have the audio cable hooked up to my stereo/Airport Express downstairs & the Airport Express plugged in... "Yellow Light" lit on Express, what next?
Thanks fellow Mac Fans!

For the AX connected to the speakers:
To set up AirTunes on the AirPort Express Base Station (AX), using the AirPort Admin Utility, connect your computer directly (using an Ethernet cable) to the Ethernet port of the AX, and then, try these settings:
AirPort tab
- Base Station Name: <whatever you wish or use the default>
- Wireless Mode: Join an Existing Wireless Network (Wireless Client)
- Wireless Network: <select the existing wireless network>
Music tab
- Enable AirTunes on this base station (checked)
- Enable AirTunes over the Ethernet port (optional)
- iTunes Speaker Name: <whatever you wish>
- iTunes Speaker Password (optional)
In iTunes:
iTunes > Preferences... > Advanced > General
- Look for remote speakers connected with AirTunes (checked)

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. any soln ?

I have bought a new airport express and using it with my macbook (iTunes 10.2.2). I have joined an existing wireless network for internet in my home and with that i am trying to play the music via itunes but there is audio dropouts every 60 secs or so. I am using a set of speakers from kenwood connected to the airport express. The operating system on my macbook is mac os X 10.5.8. i am sure it is not a problem of streaming music online because i have even tried playing music which are stored in my macbook.
Is there any problem with the setting in itunes or quicktime ? Kindly reply...... I am waiting for your valuable suggestion.
Thank you a lot in advance.

I am shocked to have found this same AX audio dropout problem starting TODAY, every few seconds the audio just drops for a couple seconds and then resumes: Latest software versions of everything. No iPad, iPhone or Touch. Internet hardwired to D-Link DES1105 (1000baseT Switch) hardwired to new 80211N AX, AX optical to stereo, AX Wi-Fi internet to basic 1st-gen MacBook operating at 80211G, and an older 'G' AX extender at the far end of the house, away from all this. The MacBook streaming iTunes is usually 12 feet from AX. I've used this setup for years of trouble-free AirTunes / Airplay until today. Today I also found 2 very reliable fixes and 1 way to force a dropout, but first, I read some posts and tried ALL following settings one-at-a-time and restored them ALL because NONE of them helped: Turned off IPV6. Streamed to multiple speakers 'Computer' and 'AX' (restored to just AX). Turned off 'Ask to Join new (WiFi) Networks'. Turned off Bluetooth (can't live without Magic Trackpad, so glad that wasn't it). Here's my discoveries: Lo and behold, each time I click the Airport icon in the Menu (you know it shows you've got 4 bars from AX) when the status switches to 'Looking for Networks' for a second it CAUSES the AX audio to drop out for a couple seconds (it never did that before today.) iTunes still playing, streaming, AX laser still lit, but the 'PCM' light on stereo and the sound GOES OUT EVERY time I click the Airport icon in the menubar, just like the regular, annoying dropouts. So, to reduce traffic I quit Safari (3 tabs, no streaming, just Gmail, Google, and Netflix browsing). Lo and behold, the dropouts stopped altogether. No other Web apps going (not iTunes Store, Genius, Ping, nothing), so I launched Chrome to the same 3 tabs and the dropouts HAVE NOT RETURNED. That's right, not only did simply QUITTING SAFARI cure it, and Chrome doesn't contribute to it, but I can demonstrate it just by forcing my Airport to re-scan. Works for me, written using Chrome. The other reliable fix is to hardwire MacBook to the Switch. This is obviously not ideal, but Airplay audio doesn't drop out over Ethernet. Also, in all my tests, it made no difference whether iTunes did the streaming, or Airfoil did.

Can I add a second Airport Express?

I have an Extreme Base Station connected to my Time Warner Cable Modem. It comes into my house in my office, which is over my garage, a separate structure in my backyard. The iMacs there are connected via Ethernet to the Apple Base Station. In my house, maybe 30 feet away, where I use two Macbook Pro's, iPhone 6, iPad 3 etc, all via Wireless, I have an Airport Express as an extender to amplify the signal because my house with it's lathe walls is a great shield. This works OK up to a point. The further away I get from the Airport Express, the fainter the signal gets.
Naturally, the farthest room away is my family room with a Smart TV, Apple TV, A/V receiver, DirecTV Cinema box, Playstation3 etc. I just added an Amazon FireStick TV via HDMI. It found my wireless network perfectly and joined. Problem is, it's buffering like crazy when I try to watch a movie and reporting "bandwidth too low". So I have a problem. I need to boost the signal one more time.
Can I add a second Airport Express to my existing network as an extender, which now consists of a Extreme BaseStation and one Airport Express.
If not, does anyone have any ideas?
Thank you.

Can I add a second Airport Express to my existing network as an extender, which now consists of a Extreme BaseStation and one Airport Express.
Sorry, but no. Even if it was possible, the speed loss would be amazing, and would really hurt, not help the current network performance.
Probably not the answer that you want to hear, but the only way to get the same signal strength and speed from your office to a location in the home is to run an Ethernet cable between the two locations.
There is no loss of signal or speed through an Ethernet cable up to 330 feet, or 100 meters. Good old Ethernet cable. Nothing comes close to a wire in terms of performance.
I faced a similar problem, and while the initial outlay to the electrician was significant, it has been the best investment that I ever made in terms of improving network performance....far better than the "improvement" with any new product, or any new router or any new technology that might have been available.
If you absolutely cannot run the Ethernet cable, then a pair of Ethernet Over Powerline (EOP) adapters might be able to send the Ethernet signal over the existing power lines in your office and home.
The theory with EOP products is that you already have the wiring in place.....you just need the adapters. Unfortunately, things do not always work as well in practice as the theory might suggest.......having the signal hop several different circuits would be one major challenge.....whether the office and home are on the same master circuit would be a question as well.
Given your situation, I would not even consider trying EOP adapters unless the store agreed to take them back within 7-14 days if they don't work well for you.

While trying to connect / configurate a second airport express it has suddenly can´t be found by the computer/ airport express manager. Any suggestions to how I can "find" it again?

I have tried to connect a second airport express to my Mac. But the configuration was interrupted and now I can´t find the second airport on the Airport Express manager display. Although I find it on network/ system settings. I appriciate any suggestions!

Hold in the reset button on the AirPort Express for 7-8 seconds, then release and allow 40-45 seconds for a restart to a slow, blinking amber light. Then reconfigure the device again.
You can also temporarily connect an Ethernet cable from your computer to the Express to establish a direct connection for the setup, rather than using wireless. Once you have the Express configured, you can disconnect the Ethernet cable.

Best way to extend wireless via airport express and time capsule

best way to extend wireless via airport express and time capsule
i live in a two storey house where i use my airport express to create a wireless network in the main floor, and time capsule to extend it in the upper floor, where my room is. i have like 16 mbps in the main floor, and 2-3 mbps in the upper floor after having speediest.
i used time capsule in the upper floor because i use wireless backup daily and don't want to put internet down while i im doin it and consequently my parent can have internet access in the main floor, am i right? or do i have make just the opposite in order to have a good internet speed?
secondly, while checking airport express wireless mode on airport utility, there is like 4 different type of radio mode(802 11n bg comp, 802 11n 2.4, 802 11n a comp, 802 11n 5ghz) which i have no idea what they mean
what do you recommend?
we have like iphone4, iphone 3g, mbookpro, ipad, ipad 2, samsung tv and a sony vaio laptop in the wireless network
thank you

What you have would appear to be working but I can comment how I would redefine your setup. Note that both Airport Express and Time Capsule can function as wireless base stations so you do have wireless everywhere and at all times — using the Time Capsules for backups doesn’t mean your parents won’t have internet access regardless of the where the base stations are located.
You appear to have devices to connect to your network that use the 2.4 GHz band with 802.11g such as the iPhone 3G and perhaps the 5 GHz band with 802.11n such as likely the Macbook Pro if it’s a recent model. The iPhone 4 can use 5 GHz and 802.11n. Can’t comment on the Sony and Samsung but you can check their specs.
Now the Time Capsule (if it’s a recent version), can simultaneously supply 2.4 GHz and 5 GHz band signals, but the Airport Express (if it’s recent) can only use one of those bands at one time. Likely the lowest common denominator for your devices is going to be the 2.4 GHz band since the devices that are capable of using 5 GHZ also support 2.4 GHz. If you don’t use 5 GHz, you won’t lose much in a two-storey home because likely it’s the 2.4 GHz band is better signal anyway because 5 GHz signals drop off quickly with several walls/floors to penetrate.
You also didn’t mention if the Airport Express is used to support a printer and/or AirPlay (using iTunes to play on remote speakers via the Airport Express connection) but that might also be a factor in the best location to place the Airport Express. Although the printer could be switched between the Time Capsule and the Airport Express if needed, only the Airport Express will support your remote speakers.
Recommend you use the Time Capsule as the Base station. When using Airport Utility to define the network, after you name your network, etc., select the Wireless tab, check the box “Allow this network to be extended” and set the Radio Mode to "802.11n (802.11b/g compatible)”.
Using the Airport Utility, click on the Airport Express; after you define the device and network name, select the Wireless tab, define the Wireless Mode as “Extend a Wireless Network” and check the box “Allow wireless clients”.
Hope that helps.

Airport Express and WRT54G v8

Airport express firmware: v6.3
WRT54G: v8
I'm unable to get my Airport Express to join my existing wireless network in Client mode. I've been able to get it to join other wireless networks using WPA, but with my new WRT54G v8 I haven't succeeded;
- Has anyone got an Airport Express to join a WRT54G v8 wireless network?
- Does the Airport Express support WPA2 when joining a non-Apple 802.11g network? It just shows WPA on the drop-down box for me.
- Is the channel selection important?
- For WPA, I've previously had to enter a $ before my ASCII-format password. Is that true in general for WPA and WPA2?
Having owned this Airport Express for 4 yrs, I have to say I'm dismayed by the level of frustration I've had with it, but I'm locked into it because I used Itunes.

I have the exact same problem. I purchased the airport express yesterday, and trying to hook it up in client mode, wirelessly to the wrt54g to be a print server. I set it up with the ethernet patch cord attached to the airport express and the wrt54g. It gets set up great and I can print and attach my clients (2 windows and 1 mac) wirelessly to the wrt54g network. If I leave the ethernet connected within 5 minutes my wireless network slows to a crawl and then stops traffic. If I disconnect the ethernet cable instantly the network returns to normal speed. But the airport express is no longer reachable. Granted it doesn't have the same IP and has to re-establish connection. However, it never re-establishes and flashes amber. Seems like it has to be security related as it seems to connect OK when the ethernet cord is attached.
I assume that to set the airport express up in client mode that the first configuration has to be made with the ethernet cord attached. Then when it resets itself to re-read the new configuration that I am supposed to unhook the ethernet cord. As it should be talking to the wrt54g through the wireless connection rather then the hard ethernet connection.
The setup steps I go through are:
- push the hard reset to get to factory settings
- connect ethernet patch cord from airport express to wrt54g
- bring up airport utility on macbook pro
- airport is found and press continue
- create a password - continue
- select I have a network - continue
- select join the network wirelessly - continue
- select my network from wrt54g
- select security
--I have tried the 40bit with the wrt54g 64bit WEP
--I have tried 128bit WEP on both
---neither works...if I try something else I need details on how to set it up
- continue and wait for when it restarts....
- If I leave the ethernet cord in, and switch back to the wrt54g wireless network, the airport express shows up in the airport utility very quickly. and seems to work for a while before taking my wireless network down.
- If I remove the ethernet cord and switch the macbook over to the wrt54g wireless network, the airport express never shows up in the airport utility and the airport express flashes amber. From the manual, this says there is connectivity issues. And through process of elimination, looks like the airport express can't get passed the security with the wrt54g.
So, I too, look for assistance.
PS. I have had the wrt54g for a couple of years and have not upgraded firmware so if that is necessary then I can do that.
PSS. At the very first airport express setup there was a new firmware loaded. Does this have to be re-applied if the airport express is hard reset (ie, paper clip in the reset hole for 10 seconds)?

Airport Express and Flashing Yellow - Please Help!

I just purchased an Airport Express and cannot get anything the status indicator to flash anything other than a yellow. I am working on a Win 7 64 bit platform and my router is Netgear N600 (model WNDR3700). The only changes I made to the router is via its utility to enter the Airport ID MAC address into the Netgears "Wireless Acces List". I deperately need input on what I might be doing wrong or need to do to my router's setup. Below are what I have tried and status info:
What I have tried:
1) Entered the AIrport's MAC address into my Netgear Router's "Wireless Access List", as well as the Ether ID (out of desperation).
2) Installed on my PC the latest version of the Airport Utility (5.5.3).
3) Plugged the Airport directly in port 4 of my Netgeat Router.
4) Changed ethernet cables.
5) Reset the Airport.
6) Rebooted the Netgear and my PC.
7) Plugged the ethernet cable from the modem directly into the Airport.
Info:
1) When the Airport is first turned on (ethernet is already plugged in), the status light turns solid greem, then goes to solid yellow for a bit, and then immediately goes to flashing yellow (approx 2 seconds between flashes) and stays that way.
2) then If I run my Advanced IP Scanner if shows the Airport, an IP of 192.168.1.20, the Airport's ethernet MAC address. The status shows "Ok".
3) If I unplug the Airport and click rescan on the IP Scanner the device remains present but the status is changed to "Dead".
Despite what I tried I get only get the yellow flashing light? Do I have a bad Airport Express or is this a failure on my part to properly set up the Netgear? Thanks in advance for any help offered.

The AirPort Express flashing yellow means it it not receiving a valid IP address. This is issued by your router.
I recommend disabling your Netgear's "Wireless Access List" until you get it resolved.
One thing that you did not mention is using AirPort Utility. You need to configure the Express using AirPort Utility for Windows. If you don't have that click here: http://support.apple.com/kb/DL1391
Read about designing AirPort Networks here: http://manuals.info.apple.com/en/designing_airport_networks_10.5-windows.pdf
A new Express creates an unprotected wireless network named "Apple Network xxxxx". You need to disconnect from your existing network and connect to that network in order for AirPort Utility to communicate with the Express. Most likely you will have to temporarily disable any and all anti-virus / firewall / security software running on your Windows to do this. If you don't see that network you will not get anywhere.
When you are finished configuring the Express in AirPort Utility, including addressing any unresolved conflicts it may report, click the button to restart it. AirPort Utility will say "the Express is now restarting" but the temporary network that it created for you to configure it will cease to exist, so just close the window. Reconnect to your usual wireless network which will now welcome the Express as a member.
After it restarts the Express should show a happy green light.
When you are finished re-enable all your Windows firewalls and AV software.

How to extend the range with a second Airport Express? Do I need a DSL cable?

How to extend the range with a second Airport Express? Do I need a DSL cable?

Thanks, now we need a bit more information, please, in order to provide you with the correct information that you need.
I assume that you already have one AirPort Express.....either a model A1264 or A1392.....set up and operating OK, is that correct?
If yes, you can extend the network either by using wireless or an Ethernet cable with a second AirPort Express.....either the A1264 or A1392 model. A wired connection is the way to go, if possible, since it provides better performance. But, wireless might work OK for you if you want to try that.
Let us know "how" you want to extend......wireless or wired?

Second Airport Express and NAS

Similar Messages

Maybe you are looking for