Second audio track named as the first, on TV

Hi to everyone,
just finished an Encore project and BR disk plays good and fine.
I've made two tracks (1 italian, 2 english).
Everything works great as mentioned, but if I push the audio botton of the Blue-Ray player remote control, audio changes correctly, TV displays "1 italian" and "2 italian" and not "1 italian" and "2 english" as expected.
Missed something in Encore or is it a BR player matter?
Second audio track in Encore timeline is marked "en".
Thanks
Giorgio

Here is a new,
just finished a DVD project with italian, english and czech (cs) audio track.
Well, it works fine, everything is displayed in the right way, czech track also.
So I tried to modify audio track hierarchy, putting italian as first, then english and czech as third with another empty french track as fourth.
Everything works OK.
So I'm in front of a "crossroad":
- or there is a problem in Blue-Ray (mpeg2) track identification process
- or I have something corrupted in my project, in this way I have to re-build the entire project
Let know in this thread...........LATER!!!!!!
Ciao
Giorgio

Similar Messages

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

I copied several MOV files to a CD. When I play them from the CD the video is fine but the audio works fine for the first few seconds then stops (using Qicktime Player 7.7.1. Everything works fine if I use VLC Media Player. Does anyone have any idea why?

My purpose for copying to a CD or DVD is so that I can make copies and send to friends and relatives. What is the best way to get these files on a CD/DVD with the right codecs?
The easiest thing to do is to simply tell your friends and relatives to copy the files to their local hard drive before playing them. Your basic problem is that data discs have a limited real time transfer rate. Since you say VLC plays the files fine, I might suspect its player is likely buffering the data while the QT 7 Player is not.
Data discs made for playback directly from the CD or DVD are normally encoded using MPEG-4/AVC (H.264) video with AAC audio. This is a modern codec which has specific settings to re-package the data (i.e., must be encoded using the multipass option and then select the "optimize for CD/DVD" option).

ATV2 and second audio track

So, for Christmas, I sent out a home video to family, and as a bonus feature included an alternate audio track, which was accessible when playing the video in Quicktime, iTunes, and other i-devices.
I then saw the video played back on an AppleTV2, and to my surprise, it didn't see the alternate audio track at all. Confirmed that on the 'server' machine, iTunes could access the audio track, but when you hold down the 'select' button on the ATV2 remote, there's a tab for 'Audio', but it's grayed out and can't be selected. I also tried using AirPlay to push the video up, and the icon for changing the audio track disappears when you do that.
I tried tinkering around with the video using Subler, but none of my settings I tried were able to make it so that the ATV2 could select between two audio tracks.
Is this possible? The presence of the menu implies that it should be possible, but I haven't found a way to do it. Can anyone tell me what needs to be set or how the audio needs to be encoded?

I'm sure they're not encoded correctly, that's my question, really. How do they need to be encoded and configured?
I've tried the following configurations...
(In Subler there's a checkbox to indicate which audio is played normally, indicated with X for checked, _ for not checked)
1 X Stereo AAC
2 _ Stereo AC3
Defaults to AAC when played on QT or iTunes, ATV2 defaults to the AC3. ATV2 doesn't show track 1 as an option.
1 _ Stereo AAC
2 X Stereo AC3
Defaults to AC3 on all platforms, ATV2 doesn't show track 1 as an option.
1 X Stereo AC3
2 _ Stereo AC3
Defaults to the checked AC3 on all platforms, ATV2 doesn't show track 2 as an option
1 X Stereo AAC
Plays on all platforms
1 X Stereo AC3
Plays on all platforms
So as far as I can tell, ATV2 simply doesn't have support for a second audio track?

Second Audio Track

How can I have Front Row play the second audio track that is part of a video?
-Sgt. Baker

Welcome to the Apple Discussions!
No, I don't think that's possible. Since Front Row really has no user interface for turning on or off an option like that, you won't be able to make that choice. You can, however, play the file with the QuickTime Player application (the current version includes a full screen option without paying for the "Pro" version). Or, if it's a DVD, the DVD Player application gives you full access to all the options.
-Doug

I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first

I have 2 phones on my iTunes account, why are text messages showing on the second phone when sent from the first phone?

it's meant to work like that
so if you receive a message on your iphone you also get it on your ipad or ipod touch
to avoid it use separate appleID for each device
or turn off imessage on 1 or both devices in their settings
but that will not fix the issue that 2 devices using the same appleID will never be able to facetime eachother
the appleID is a unique handle for 1 user only

I bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

i bought a second hand ipad 4 4g the first user forgot the apple id and password, how can i restore the ipad and create a new id and password for it?

You cannot get around Activation Lock without the oringinal owner disassociating the iPad from their account.
See the Activation Lock FAQ for what you and they need to know.

How to make the audio track independent from the video track?

Can someone remind me how to make the audio track independent from the video track? My memory just went blank. Must be the age.
Thanks

Hi -
Select the clip in the timeline.
Type Command + L or go to the menu Modify > Link to toggle it off.
MtD

How to populate Second drop down based on the first drop down value

Hi Experts,
i have a HTML BSP page. with 2 drop down with SELECT and OPTION tags. i need to populate the second drop down based on the first drop down value.
i tried HTMLB script they work good as stand alone when i try to embed the HTMLB with HTML it does not work.
Please can you give me a solution only with ABAP script and HTML.
please clearly let me know on what event i should implement it. sample code is really appreciated .
With regards,
Chella

You can have event handler for first drop down . Then populate the data for 2nd field when the event triggers on first field.

Why won't both audio tracks appear on the timeline????

Hello,
here is a dumb question. When I drag my clips to the timeline only one audio track appears on the timeline and I know there are two track of audio. I must have accidently changed some settings. anyone know what's up?
Thanks for your help

Are both audio tabs connected to the timeline? Just to the left of the timeline are the V1 and A1 and A2 audio tabs from the source clips. Is one disconnected?
Shane

Multiple audio tracks playing at the same time?

Does the Adobe Elements 12 allow us to have mulitple audio tracks playing at the same time? Is there a limit to the number of tracks?
Thanks!

Hi Jennifer3211,
Yes you can play multiple audio tracks simultaneously. The maximum no. of audio tracks can be 99.
Thanks

Audio tracks locked yet the track still gets bumped out

I'm editing a music video. I put the audio track for the song onto the first/second line of the timeline and locked the tracks. Then I added a video clip and the audio for that bumped the locked audio out of the other lines! It's never done that for me before, how do I get it to QUIT?

Hi,
Assuming that you really locked the audio track (see the diagonal lines running all along the locked track):
!http://i533.photobucket.com/albums/ee340/gogiangigo/lockedaudio.jpg!
you might be experiencing some bizarre behavior, which [trashing the preferences|http://www.digitalrebellion.com/pref_man.htm] could fix.
Try that,
G.

Multiclips and multiple audio tracks playing at the same time

I've only just taken delivery of my first ever mac (only ever used PC) with FCP, and I'm loving it already! Done lots of reading and viewing of video etc etc, and it's not as daunting as I thought it might be. I have one question the books don't seem to answer, and I can only find one reference to this on this site, with no definitive response. FCP5 probably doesn't work this way, but just in case someone knows different......
I film and edit motorsport (karting) programmes for television in the UK, using multiple cameras. I usually lay all the video and audio tracks on the timeline, (synched) lock the audio for each (as it is engine noise, and I want it playing without abrupt changes at cuts as each kart passes each camera, whether in shot or not) then cut the video tracks and delete those video segments not required.
The most exciting aspect of FCP5 for me is the multiclip editing facility, which I have found very easy to learn and is going to save me hours of work! However, I want to know if there is a way of having each audio track from each camera used in the multiclip laid down on the timeline when you import the multiclip to the timeline from the viewer, in order that I can play each audio track from each of the cameras at the same time.
I know how to cut from angle to angle, leaving the audio from the selected angle as the one audio track playing, but I want all of the tracks to appear in the timeline and play at the same time. I know there's a bit of a workaround by locking the video and importing each audio track from each clip independently, but if you do have to re-synch one of the multiclips, this means the audio is not then synched with the original clip, which will have had an in point set before being imported in as part of a multiclip.
I can understand why you might want to keep audio from one camera only playing over the whole multiclip, or to switch between audio from each, but in my case I prefer all audio to play at the same time. The workaround is still do-able for me as I'm only talking about engine notes, which if they are a few frames out is not very noticeable at all, but I would like to know if I'm right in thinking I cannot do it the way I would like to?
Wish I'd used FCP from the start, but glad I've got it now.....especially with the 30 inch screen! It's 4.40am, been going over 19 hours straight and I'm still making comments like...."WOW, that's brilliant"...every half hour!
G5 Mac OS X (10.4.3) Quad, 8gb ram, 2 x G-Media GRaid 500gb Raids, 30 + 20 inch Cinema screens

...

Audio track restarts in the middle of a clip

Hi!
I'm having an interesting issue with the audio tracks in my Timeline.
When I start playing a clip the audio is in sync with the video. Then about 5 seconds into playing the clip the audio starts over. The playhead does not go back to the beginning, but the same audio is looped over again--and of course is now out of sync with the video track. The clips are not out of sync in the Timeline.
For example, one clip is an interview: "This duck is un-banded so I'm going to get to put a band on this duck. It's a male mallard. I can tell because it's starting to get it's green head. Although at this time of the year..." (audio cuts off and restarts): "This duck is unbanded so I'm going to get to put a band on this duck. It's a male mallard. I can tell because it's starting to get it's green head. Although at this time of the year they are molting so they don't have the brilliant green head that we're all used to seeing."
The waveform of the audio restarting is represented when I open the clip from the Timeline into the Viewer! However if I go back to the Browser to the original clip and play that, the audio track is fine.
What's going on here? What can I do to fix this besides grabbing the original clips from the Browser and replacing them in the timeline? Or forcing the audio tracks out of sync to match? (eek!)
I must have done something weird...
Message was edited by: Coyotegyrl

One example of an affected clip:
Source is from a Panasonic HD camera--so transferred to FC from a P2 card
Item properties:
817.5 MB
960x720
DVCPRO HD 720p60, Interger (little Endian), Timecode
Hey--could this be caused by the frame rate of the sequence? I just noticed that the sequence these affected clips are in is 60fps, and my video clips are 23.98fps. So--I copied and pasted my clips into a new 23.98 sequence and the issue has gone away. Huh. Oops... Not enough coffee this morning.
Thanks for trying to help out--sorry to have answered my own question (duh).
Message was edited by: Coyotegyrl

Is it possible to group video and audio tracks separately in the timeline?

Currectly tracks are ordered like this:
video
audio
video
audio
video
audio
Can I arrange them to look more like:
video
video
video
audio
audio
audio
Since I get to use both Premiere Pro and Final Cut Pro frequently at work, I would find it more natural if audio and video were grouped separately.

You are welcome.
I find it interesting, as about 10% of the users of PrE would like to arrange the Audio & Video Tracks in the form of PrPro, however, about 10% of the users of PrPro would like to arrange them like PrE!
Personally, I find the PrPro arrangement (as you were requesting) to be the most logical for my workflow. I do my Video first, and like all Tracks grouped atop the divider line, and when done there, move down to my Audio. I still get lost and confused in PrE, because of the grouping there.
Now one little tip, that might help you a bit: one can Add, or Delete Tracks pretty easily. I have a Sequence (think multiple Timelines in PrE) Preset that gives me 4 Video Tracks, 1 mono Audio Track, 4 stereo Audio Tracks, and a DD 5.1 SS Master Track. This is the "average" of the normal Timelines that I work with. When doing an edit, where the extra Tracks are not needed, I choose Sequence>Delete Unused Tracks to "clean" things up a bit. Then, I am only looking at Tracks (Video and Audio) that are in use.
Good luck,
Hunt

How can I export an audio track with just the effect signal without the audio?

I want to export dry audio tracks and their effects signals as separate tracks. For instance a track with a reverbed snare would be one track with the dry snare and one with just the reverb.
I know from people who use Reason that it's just a box you need to tick, but I'm struggling to find out how to do it in Logic. Surely it must be a way?

I don't remember Reason being that straight forward, but the obvious way to go, is to mute all sends and bounce.
Then solo the reverb channel, in aux, checking it isn't shared by other sources, and bounce. You should have a dry and a reverbed signal, at your convenience.

Second audio track named as the first, on TV

Similar Messages

Maybe you are looking for