Second dvd shows in profile under serial-ata, second dvd shows in profile under serial-ata, second dvd shows in profile under serial-ata

But, in the profile under disk burning indicates no second cd/dvd/bluray installed in the secondary bay...restored by restarting... at times I will be instructed to shut down and re-start. The driver will eventually disengage and the profile indicates the hardware only in the serial-ata but, not in the disk burning.
PIONEER BD-RW   BDR-206D:
  Model: PIONEER BD-RW   BDR-206D               
  Revision: 1.56   
  Native Command Queuing: No
  Removable Media: Yes
  Detachable Drive: No
  BSD Name: disk3
  Power Off: No
  Async Notification: Yes
  Partition Map Type: Unknown
  S.M.A.R.T. status: Not Supported

Kool, thanks

Similar Messages

  • DVD player only shows video under Intel graphics

    I have a Macbook Pro 15", i7 2.66, and just noticed that Apple's DVD Player app will only show video under Intel graphics. When it's switched to the Nvidia 330M, all I get is a black screen (+ audio).
    Oddly, the VLC app works fine, so I'm (sort of) hoping this is a software issue. Anyone else experience this?

    Agreed it is a shame. This is the second time to hear of this glitch. I do not know if it constitutes a bug however.
    If you want to report it to Apple's engineers, send a bug report via its Bug Reporter system. To do this, join the Mac Developer Program—it's free and available for all Mac users and gets you a look at some development software. Since you already have an Apple username/ID, use that. Once a member, go to Apple BugReporter and file your bug report. The nice thing with this procedure is that you get a response and a follow-up number thus starting a dialog with engineering.
    Message was edited by: leroydouglas

  • I have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i ha

    i have the following problem: i lost my cs6 Adobe Production Premium installer dvds and the serials within the package, after all i logged here into adobe and cant find any product in my profile, so i am not able to see my serials or my installations i have on my macbookpro. Can you help me to find out where i am registerd?

    If your registrations do not show at https://www.adobe.com/account.html you will not get help in an open forum
    You MAY get help at Contact Customer Care
    -Select your product and what you need help with
    -Click on the blue box "Still need help? Contact us"

  • Why doesn't my serial ata dvd burner stay engaged?

    I recently installed an internal dvd and it will not stay engaged.
    Eventually as I am working in something unrelated to the dvd, the burner will put up a message telling me that I inserted a dvd and what speed i would like to burn at even though I didn't insert any dvd. this is followed by disengagement of the driver or a message code say the it is unsupported.
    When I access my profile it shows only the super drive but not the newly installed dvd burner in the disk burning category however the new burner is listed in the seril-ata category.
    when I restart it will  reinstate the burner and i go through the same ordeal again.
    Thank you for any advice.

    Apart from the Energy Saver setting, the drive should work with OSX except for playing Blu-ray movies.
    You can play Blu-ray movies with Mac Blu-ray Player
    <http://www.macblurayplayer.com>
    If you don't want to buy that, you can use MakeMKV
    <http://www.makemkv.com/>
    to copy the movie to the hard drive, then play it with VLC
    <http://www.videolan.org>

  • Serial No. no longer shows in system profiler after new logic board..!

    My Macbook had to go in to my Apple Service centre to get the random shutdown fault fixed. They fitted a new logic board and last night I noticed that the System Profiler no longer show the computers serial number. Instead it says "systemserialnumb" where before it listed the Macbooks serial number. Does anybody know whether this will affect my 3 year Applecare warranty as normally they check your machines warranty status by confirming the serial number? I have all the documents but would not normally carry them all if away from home.

    I love this board..ask a question and someone always knows the answer..! Mort..thanks, at least now I know it has happened to other people and also that the serial number is also to be found under the battery which for repair and service purposes is good. I am a little surprised that the engineers don't routinely reset it at the time of repair though as it is one of the pretty relevant bits of information in the "about this computer" button.
    thanks

  • HT2693 I have the phone number and iphone serial # of my second device that is missing.  However it has the same Apple ID and is not showing up on the "Find iphone". Could you please help me?

    I have the phone number and iphone serial # of my second device that is missing.  However it has the same Apple ID as my other iphone and is
    showing up on the "Find iphone". Could you please help me find my iphone
    <Personal Information Edited by Host>

    Sorry if this seems negative but you really should post such a question in the iPhone section of Apple Communities.   You are much more likely to get expert help there immediately.
    Just re-post with the same detail.

  • Serial number not showing up in system profiler

    hi,
    i recently had a problem with my speakers in macbook.
    i sent it for service and the service center replaced my main board
    now the system profiler is not showing my serial number.
    do any one know how to fix this problem.

    You would need to send it back to have the serial number burned in to the board. This seems to be a common occurrence when the board is replaced. There should be a number you can call on the paperwork from the repair and discuss it with them.

  • Profile - sometimes Moderator / Answerer tag will not show up under my name

    The "answerer"-label under  my name only shows sometimes and disappears. 
    Can someone help me out?
    Thanks everyone for all the great work. Keep up the good work.
    --Prashanth

    There was a bug report submitted for this a couple of weeks ago:
    http://social.technet.microsoft.com/Forums/en-US/461989a9-8c85-46b7-a4f5-7825565ad848/profile-sometimes-answerer-tag-will-show-up-under-my-name?forum=reportabug
    The workaround of refreshing the page still doesn't work for me. I see the tag right after the post is submitted, but after a refresh it disappears forever.
    Don't retire TechNet! -
    (Don't give up yet - 12,830+ strong and growing)

  • Looking for my serial number under subscription on adobe acroBat pro X1 is chewing all of my important seconds in my life.

    Looking for my serial number under subscription on adobe acrobat pro X1 is chewing all of my important seconds in my life. I purchased today 19.99 and I want to start my testing in this software but there is no way I can find any serial number in my email or in my account?

    On May. 12, 2014, you purchased the Subscription of Acrobat XI Pro.
    Creative cloud do not need a serial number. it will be using your Adobe ID on which you have purchased the creative cloud membership.
    So you need to login with your Adobe ID and password to activate the cloud membership.
    Log out & log back in of the CC Desktop App.
    In case it is not signing in successfully please try the following:
    I don't know which operating system you are working on so i am giving you some steps windows and MAC OS:
       Windows:
       In windows 7 navigate to following location:
         /windows/system32/drivers/etc
       1. look out for "Hosts" file
       2. Open it with notepad
       3. Check if you have any entry for Adobe
       4. Remove the entries and try again launching any product from CC
       Mac
       1. Please click on "Go" and navigate to /private/etc
       2. Open "hosts" file and check out for any entries for Adobe.com
       3. Remove the entries and save the file
       4.  try again launching any product from CC
    You can refer :
    http://helpx.adobe.com/creative-cloud/kb/ccm-prompt-serial-number.html
    http://helpx.adobe.com/x-productkb/policy-pricing/activation-network-i ssues.html.
    Please let us know if it worked.
    Regards,
    Rajshree

  • HT201304 I have no profile tab showing under settings General

    I have no profile tab showing under settings>General

    Profiles are generally installed by an employer or company to add specific controls on a device - so, there is likely no such control on your device.  Do you think there should be?

  • I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and show the project on my TV than after 10 min. the music stops for a few seconds.

    I made a DVD with photo's and music. On my Powerbook G4 he plays perfect. But after burning the project on my LaCie d2 lightscribe and showing the project on my TV than: after 10 min. the music stops for a few seconds. On the screen of the DVD-player I can see that after the word 'play' the clock starts again with counting the time. I tried everything: * burning slow. * all programs stopped, except iDVD. * all other apparature uncoupled. Is this a problem of my iDVD-program or my LaCie burner?

    mishmumken is correct about the 99 slides.  There's an 99 chapter limit in each slideshow for DVDs and each photo is considered a chapter.  iDVD gets around that by renaming slide 100 back to 1 and goes on. 
    The pause can be minimized (but not eliminated) by burning to disk at the slowest speed available: usually 4x or 2x.  Save the project to disk (File ➙ Save to Disk menu option) and play the disk image with DVD player to check out the transition at 99 and 198.  Then burn the disk image to disk with Disk Utility at the slowest speed possible.  Also use top quality media: Verbatium, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
    OT

  • I can't find my serial number. My CC is not showing up under products and services

    I can't find my serial number. My CC is not showing up under products and services

    Hi Natasha,
    I have checked the order details and everything seems to be fine from our end . if you have already downloaded the software, i would request you to kindly launch the software and then click on License this software and sign in with the Email ID that you used while placing the order . This should activate the product on your machine .
    If you need to download the product ,you can simply navigate over to Creative.Adobe.com and sign in with the same id and download .
    Regards,
    Kartikay Sharma

  • Under Serial-ATA Device Tree, is power off normal?

    Trying to track down freezes and system profiler shows two components to the Hitachi drive. Is the power off setting normal?
    HL-DT-ST DVDRW GS21N:
    Model: HL-DT-ST DVDRW GS21N
    Revision: SA18
    Serial Number: KZZ9**556
    Native Command Queuing: No
    Detachable Drive: No
    Power Off: Yes
    Async Notification: No

    I think it is advice about the capability of the optical drive's hardware, eww, rather than a statement about its actual status at any given time. It simply means that the drive is capable of responding to power off commands from the computer's operating system.
    I know when testing optical drives for speed, etc, on Pcs they often disable such features in the computer's bios to prevent them being accessed during testing in a fashion that might impact on results.
    Cheers
    Rod

  • Serial-ATA DVD Burners

    Does any body know if there are any serial-ata DVD burners for Mac?

    They do make them:
    http://www.hardwarecentral.com/hardwarecentral/news/article.php/3648236
    but I'm just not sure how well they'd work on a mac. Not an approach I'd use myself. I prefer using the internal ATA bus for a pioneer S-Drive like the 103 thru 111 which are very compatible with most macs. I'd even recommend using an ext. FireWire S-Drive over the approach you may be considering.
    Here's the one I made myself from a pioneer 110 and an an ADS Pyro FW enclosure. Works Great!
    Very easy to install:
    Hope this helps. If so, then please take the time to mark your question as "Answered." Good luck.
    SDMacuser

  • Installation of the LG GGC-H20L serial ATA BlueRay/HD DVD drive

    I have a quad PowerMac G5 one of the last ones before the intel Pro version, I would like to install the new LG BlueRay/HD DVD drive in place of the superdrive. Will this work, the new drive is serial ATA, is I can't tell what the superdrive connection is from the spec sheet so I guess I will have to dive into the case and take a look.
    LG says it will work with as OS as long as I have a serial ATA connection I should be good to go, I won't be able to use Light scribe though.
    Has anyone tried this any assistance will be much appreciated.
    http://us.lge.com/products/model/detail/computer%20productsoptical%20drives_optical%20drivesGGC-H20L.jhtml

    All drives in the very near future as in the next couple of months are going to all be Sata, Currently most drives I have tested Lite-On LG can work externally on any 5.25" box that has a USB 2.0 connection. Currently I have 3 running off a Mac Mini, no sweat. As for the MacTower Pro it has 2-4 additional Sata connectors on the mother board and a converter for the current power connector can be purchased at almost any PC shop. As for the G5 needing a Sata Card I recommend using FirmTek Seritek PCI-x cards that have internal and external 2-4 ports. They are relatively inexpensive and do not need any drivers. Ordering a H20L for my MacMini media center on Monday.

Maybe you are looking for

  • Import from Aperture not working - Import Button Disabled?

    Hi I am trying to migrate my Aperture library to Lightroom 5.7.1 I open Lightroom and start the plug-in. It "thinks" for a while then stops; the Import button is disabled. I put a screenshot below. It is in Portuguese but you can see the Aperture Lib

  • Migrating from 1.25Ghz G4 to Intel iMac problem

    Hi there! Question in brief: Can I install old (non-universal) software (such as IDCS2 and Qk6.5) on a new Intel iMac? Question at length: Just got a new iMac here, and wanteed to do a migration (which I've done problem-free between PCC Macs) and hav

  • Model in Web Dynpro

    When changing the WebService already exposed and linked with a model in WebDynpro, can we modernize the changed in WebDynpro?

  • Oracle SQL DataModeler and XSD transformation

    Hi, i want to create a Logical Data Model and have a already defined XML schema, how a can i import the XML elements, data types and documentation of each xml element or attribute and then create the Entities, data types and relatioships? Pedro.

  • Acer 2800 Imaging Problem

    when trying to type the IMG command at the bash promt i recieved command not found, also after the Linux kernal loads it displays a message stating that the Network card is not supported. I am using ZENworks for Desktop 4, maybe it doesn't have linux