Second Exchange 2010 installation

I have one exchange 2010 installed in current forest.
I want to install second exchange 2010 server.
What are the pre-requests for 2nd exchange server 2010 installation.
After installation, if i want to make DAG what are its requirement?
Regards,
Sadanand Velechi

Hi Sadanand,
In addition to Andy's suggestion, I would like to clarify the following things:
1. You need to have Enterprise edition of Windows on all nodes for the DAG.
2. All DAG nodes need to be the same version of Windows and ideally keep as close as possible on patch levels.
What's more, here is an article for your reference.
Planning for High Availability and Site Resilience
http://technet.microsoft.com/en-us/library/dd638104(v=exchg.141).aspx
Hope it helps.
Best regards,
Amy
Amy Wang
TechNet Community Support

Similar Messages

Adding a second Exchange 2010 Server to an exsisting site.

We have a working server and I want to load a second Exchange 2010 server and migrate all roles and users to the new server. What if anything do I need to watch when doing this. This first step I want to do is move all users to the new server because we
are running out of space on the old server, and then I will move roles to the new server. then shut the old server down. Again just looking for some good directions to do this.
Thanks,
Dan

Hi,
I agree with DareDevil57. We can add a new Exchange 2010 server and migrate from the old Exchange 2010 to the new Exchange 2010 server. Make sure the new Exchange server works well, then we can decommission the old Exchange 2010 server.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

Error Code 8224 Ldifde Exchange 2010 installation failure

Hi, here is a problem I have been bashing my head with for about a week. I am transitioning to Exchange 2010 from 2003. I have two DC's running Windows Server 2003 Sp2, one of which is the Exchange 2003 server. I have just brought online a windows 2008R2
member server, which I am attempting to install exchange 2010 on. I get the following error message during installation.
Organization Preparation
Failed
Error:
The following error was generated when "$error.Clear(); install-ExchangeSchema -LdapFileName ($roleInstallPath + "Setup\Data\"+$RoleSchemaPrefix + "schema1.ldf")" was run: "There was an error while running 'ldifde.exe' to
import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'".
There was an error while running 'ldifde.exe' to import the schema file 'C:\Windows\Temp\ExchangeSetup\Setup\Data\PostExchange2003_schema1.ldf'. The error code is: 8224. More details can be found in the error file: 'C:\Users\administrator.CFN\AppData\Local\Temp\2\ldif.err'
Elapsed Time: 00:00:22
And from the ldif.err:
The connection cannot be established
The error code is 8224
Now I have checked dns, all is good. I can resolve the DC without issue.
I have done dcdiag and netdiag and passes all tests. I have even written a hosts file, all this to no avail.
Any help would be appreciated.
Thanks
B

I had a same and I fixed this........
Solution
1. The error is happening at the "Organization Preparation" stage, so let's go 'old school' and do that manually.
2. Locate the server on your network that is the schema master (Locate FSMO Servers).
3. Put the Exchange 2010 DVD in the schema master (Or share it over the network and connect to it from the schema master server).
4. Drop to command line and change to the DVD Drive/Directory with the Exchange 2010 setup files in it.
5. ONLY do this if you have Exchange 2003 already! Run the following command, (If no Exchange 2003 present, skip to the next step).
X:\Setup /PrepareLegacyExchangePermissions (Where "X" is CD ROM derive letter)
6. Run the following command:
X:\Setup /PrepareSchema
7.
Run the following command:
X:\Setup /PrepareAD
Note: At this point it may fail, and say it requires an organization name, (it will do this if it finds no existing container in Active Directory).
Error
Exchange organization name is required for this mode. To specify an organization name, use the /organizationName parameter.
If that is the case, then run the following command:
X:\Setup /PrepareAD /OrganizationName:"Your required org name"
Reboot your server and try to install exchange 2010.
Jotiba Patil

Exchange 2010 Installation error

Hi All,
I'm at my over 10th installation of Exchange 2010 server and it is the first time I have to admit that I can't resolve the issue i'm faced off ;-)
Here is some info about my issue. The installation is on a Windows 2008 R2 (Virtual) sit on a Windows 2012 R2 server with Hyper-V and it is a fresh vanilla installation that I'm trying to install for the 3rd time. Each attempts returned me the same error
at the same steps.
The Exchange installation is a typical, common, CAS, Mailbox and HUB installation without any particular configuration in the setup.
Here is the error I get:
Client Access Role
Failed
Error:
The following error was generated when "$error.Clear();
$urlToUse = "https://" + $RoleFqdnOrName + "/ews/exchange.asmx";
new-WebServicesVirtualDirectory -windowsAuthentication:$true -WSSecurityAuthentication:$true -InternalNLBBypassUrl $urlToUse -DomainController $RoleDomainController -Force -GzipLevel High;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MTL1EX01.parasuco.com/W3SVC/1/ROOT/EWS' on 'MTL1EX01'.".
An error occurred while creating the IIS virtual directory 'IIS://MTL1EX01.parasuco.com/W3SVC/1/ROOT/EWS' on 'MTL1EX01'.
The type 'Microsoft.Exchange.Services.Wcf.MessageEncoderWithXmlDeclarationSoap11BindingElementExtension, Microsoft.Exchange.Services, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' registered for extension 'EWSMessageEncoderSoap11Element'
could not be loaded. (C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\EWS\web.config line 2373)
Click here for help... http://technet.microsoft.com/en-US/library/ms.exch.err.default(EXCHG.141).aspx?v=14.1.218.11&e=ms.exch.err.Ex88D115&l=0&cl=cp
I Googled every single point of failure indication and I didn't get reliable fix or work around.
I used ADSI edit to see if the IIS folders are there and yes they are except the EWS one which is mentioned in
the error message. Forest, Domain and AD have been prepared as it should, DCDIAG doesn't return any problem and the security has been set
properly for Legacy migration with an Exchange 2003 organisation.
Here is the par of the Exchange setup log where it stopped:
[03-06-2014 16:15:26.0488] [1] Processing component 'Client Access Services Configuration' (Configuring Client Access services.).
[03-06-2014 16:15:26.0488] [1] Executing:
$urlToUse = "https://" + $RoleFqdnOrName + "/ews/exchange.asmx";
new-WebServicesVirtualDirectory -windowsAuthentication:$true -WSSecurityAuthentication:$true -InternalNLBBypassUrl $urlToUse -DomainController $RoleDomainController -Force -GzipLevel High;
[03-06-2014 16:15:26.0503] [2] Active Directory session settings for 'New-WebServicesVirtualDirectory' are: View Entire Forest: 'True', Configuration Domain Controller: 'powerhouse.parasuco.com', Preferred Global Catalog: 'powerhouse.parasuco.com', Preferred
Domain Controllers: '{ powerhouse.parasuco.com }'
[03-06-2014 16:15:26.0503] [2] Beginning processing new-WebServicesVirtualDirectory -WindowsAuthentication:'True' -WSSecurityAuthentication:'True' -InternalNLBBypassUrl:'https://mtl1ex01.parasuco.com/ews/exchange.asmx' -DomainController:'powerhouse.parasuco.com'
-Force:'True' -GzipLevel:'High'
[03-06-2014 16:15:26.0636] [2] Searching objects "MTL1EX01.parasuco.com" of type "Server" under the root "$null".
[03-06-2014 16:15:26.0649] [2] Previous operation run on domain controller 'powerhouse.parasuco.com'.
[03-06-2014 16:15:26.0650] [2] Processing object "MTL1EX01\EWS".
[03-06-2014 16:15:29.0130] [2] [ERROR] Unexpected Error
[03-06-2014 16:15:29.0130] [2] [ERROR] An error occurred while creating the IIS virtual directory 'IIS://MTL1EX01.parasuco.com/W3SVC/1/ROOT/EWS' on 'MTL1EX01'.
[03-06-2014 16:15:29.0131] [2] [ERROR] The type 'Microsoft.Exchange.Services.Wcf.MessageEncoderWithXmlDeclarationSoap11BindingElementExtension, Microsoft.Exchange.Services, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' registered for extension
'EWSMessageEncoderSoap11Element' could not be loaded. (C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\EWS\web.config line 2373)
[03-06-2014 16:15:29.0138] [2] Ending processing new-WebServicesVirtualDirectory
[03-06-2014 16:15:29.0139] [1] The following 1 error(s) occurred during task execution:
[03-06-2014 16:15:29.0139] [1] 0. ErrorRecord: An error occurred while creating the IIS virtual directory 'IIS://MTL1EX01.parasuco.com/W3SVC/1/ROOT/EWS' on 'MTL1EX01'.
[03-06-2014 16:15:29.0139] [1] 0. ErrorRecord: System.InvalidOperationException: An error occurred while creating the IIS virtual directory 'IIS://MTL1EX01.parasuco.com/W3SVC/1/ROOT/EWS' on 'MTL1EX01'. ---> System.Configuration.ConfigurationErrorsException:
The type 'Microsoft.Exchange.Services.Wcf.MessageEncoderWithXmlDeclarationSoap11BindingElementExtension,
Microsoft.Exchange.Services, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' registered for extension 'EWSMessageEncoderSoap11Element' could not be loaded. (C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\EWS\web.config
line 2373)
at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
at System.Configuration.Configuration.GetSection(String sectionName)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExtendedProtection.WebConfigReflectionHelper.CommitToWebConfig(ExchangeVirtualDirectory exchangeVirtualDirectory, Task task, String path, String site, String server, Boolean isTokenCheckingSpecified,
Boolean isSpnListSpecified)
at Microsoft.Exchange.Management.SystemConfigurationTasks.ExtendedProtection.CommitToMetabase(ExchangeVirtualDirectory exchangeVirtualDirectory, Task task)
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessMetabase()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewWebServicesVirtualDirectory.InternalProcessMetabase()
at Microsoft.Exchange.Management.SystemConfigurationTasks.NewExchangeVirtualDirectory`1.InternalProcessRecord()
--- End of inner exception stack trace ---
[03-06-2014 16:15:29.0139] [1] [ERROR] The following error was generated when "$error.Clear();
$urlToUse = "https://" + $RoleFqdnOrName + "/ews/exchange.asmx";
new-WebServicesVirtualDirectory -windowsAuthentication:$true -WSSecurityAuthentication:$true -InternalNLBBypassUrl $urlToUse -DomainController $RoleDomainController -Force -GzipLevel High;
" was run: "An error occurred while creating the IIS virtual directory 'IIS://MTL1EX01.parasuco.com/W3SVC/1/ROOT/EWS' on 'MTL1EX01'.".
[03-06-2014 16:15:29.0139] [1] [ERROR] An error occurred while creating the IIS virtual directory 'IIS://MTL1EX01.parasuco.com/W3SVC/1/ROOT/EWS' on 'MTL1EX01'.
[03-06-2014 16:15:29.0139] [1] [ERROR] The type 'Microsoft.Exchange.Services.Wcf.MessageEncoderWithXmlDeclarationSoap11BindingElementExtension, Microsoft.Exchange.Services, Version=14.0.0.0, Culture=neutral, PublicKeyToken=31bf3856ad364e35' registered for extension
'EWSMessageEncoderSoap11Element' could not be loaded. (C:\Program Files\Microsoft\Exchange Server\V14\ClientAccess\exchweb\EWS\web.config line 2373)
[03-06-2014 16:15:29.0140] [1] [ERROR-REFERENCE] Id=ServicesComponent___ca981854eaa74c1ca684178d9ea52fff Component=EXCHANGE14:\Current\Release\Shared\Datacenter\Setup
[03-06-2014 16:15:29.0140] [1] Setup is stopping now because of one or more critical errors.
I appreciate the time anybody would spend to help me with my issue

Well, here is a status of what I did.
After running the Cleanup tool, I ran the Exchange server setup again without re installing anything and I got the same error and I have found .NET issue in the application's event logs (Event ID 1111 .NET runtime optimization service with this error code:
- Error code 0x80029c4a =
Cannot Load Library); . Why that? because there still Windows Kernel Mode and User Mode .NET 1.11.
So I uninstalled them and ran the exchange setup again. It failed a the same point but nothing in the application log that time.
Going further to see if it is a .NET issue, I re installed from Windows Update the .NET
1.11 packages (Which are required prior to reinstall .NET 4.5) restart the server + re install version 4.5.1 and ran the setup again without the two available security patches for .NET 4.5.1. Guess what, same issue. No .NET error and no specific or related
log except the Exchange setup installation error.
From the MSExchange Management log, i have found that 2 errors are logged each time I run the setup:
Cmdlet failed. Cmdlet Install-ClientAccessRole, parameters {DomainController=powerhouse.parasuco.com, UpdatesDir=E:\Updates, ExternalCASServerDomain=webmail.parasuco.com}.
Cmdlet failed. Cmdlet New-WebServicesVirtualDirectory, parameters {WindowsAuthentication=True, WSSecurityAuthentication=True, InternalNLBBypassUrl=https://mtl1ex01.parasuco.com/ews/exchange.asmx, DomainController=powerhouse.parasuco.com, Force=True, GzipLevel=High}.
So it seems to me to be a IIS and security issue. Again, All other IIS virtual folders have been created without any problem. Why does the setup can't create the EWS one???

New Exchange 2010 installation. HUB and CAS on two seperate servers, need two certificates?

Title says it all. I have already completed the Exchange server installation with 2010 R1 on 2008 R2 sp1 servers in HyperV
I have two physical servers in one rack. HVHost1 one holds EXCHHUB and EXCHMB1 HVHOST2 holds EXCHCAS and EXCHMB2
do I have to generate and request two seperate SAN certificates one for the CAS and one for the HUB? or will one certificate do the trick?
If I can use one certificate, do i need to do anything special to apply it to both servers or just let the wizard do its thing?
Thanks,

Make sure you are selecting the correct server in EMC when installing the Cert.
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com    Twitter:
  LinkedIn:
   Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Webmail OWA is timing out every 30 seconds exchange 2010

we have a single user whose web-mail OWA is timing out every 30 seconds . What must be possible hot fix for issue as this is working fine for all other users so far. Tried on different browsers both from within and outside organization & different
machines as well.
Aditya Mediratta

Hi Aditya,
We can follow the following steps:
1. Grant the import and export right to an account (Administrator) in your organization:
New-ManagementRoleAssignment -Role “Mailbox Import Export” -User administrator
2. Export mailbox A to a PST file:
New-MailboxExportRequest -Mailbox A -FilePath \\esp-ho-ex2010a\pst\A.pst
3. Confirm the progress of the mailbox export requests is Completed:
Get-MailboxExportRequest | Get-MailboxExportRequestStatistics
4. Import the PST file to a new mailbox B:
New-MailboxImportRequest -FilePath \\esp-ho-ex2010a\pst\A.pst -Mailbox B
5. Confirm the import process is completed:
Get-MailboxImportRequest | Get-MailboxImportRequestStatistics
6. Remove all completed requests:
Get-MailboxExportRequest | where {$_.status -eq "Completed"} | Remove-MailboxExportRequest
Get-MailboxImportRequest | where {$_.status -eq "Completed"} | Remove-MailboxImportRequest
Here are two articles about Export and Import process below:
How to Export Mailboxes with Exchange Server 2010
http://exchangeserverpro.com/export-mailboxes-exchange-server-2010-sp1/
How to Import PST Files into Mailboxes with Exchange 2010
http://exchangeserverpro.com/exchange-2010-import-pst-files-mailboxes/
Regards,
Winnie Liang
TechNet Community Support

Exchange Server 2010 Installation

I am getting the following error while installing Exchange Server 2010 on Server 2008 R2. Following is the log file:
Summary: 3 item(s). 1 succeeded, 1 failed.
Elapsed time: 00:00:02
Preparing Setup
Completed
Elapsed Time: 00:00:00
Mailbox Role
Failed
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Error:
The following error was generated when "$error.Clear(); if ([Environment]::OSVersion.Version.Major -ge 6) { $WsbBinPath=$RoleInstallPath+"bin\wsbexchange.exe"; $reg= join-path (join-path $env:SystemRoot system32) reg.exe; $servicecmd = join-path
(join-path $env:SystemRoot system32) sc.exe; if ((get-service wsbexchange* | where {$_.name -eq "wsbexchange"})) { if ((get-service wsbexchange).Status -eq "Running") { Start-SetupProcess -Name:"$servicecmd" -Args:"stop wsbexchange";
} Start-SetupProcess -Name:"$servicecmd" -Args:"delete wsbexchange"; } Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /t REG_SZ /d `"CExchangeHelper Class`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg"
-Args:"add `"HKCR\CLSID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}\LocalServer32`" /t REG_SZ /d `"$WsbBinPath`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`"
/t REG_SZ /d `"CExchangeHelper Class`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LocalService /t REG_SZ /d `"wsbexchange`" /f"; Start-SetupProcess
-Name:"$reg" -Args:"add `"HKCR\APPID\{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /v LaunchPermission /t REG_BINARY /d `"010004806000000070000000000000001400000002004c0003000000000014001f000000010100000000000512000000000018001f000000010200000000000520000000200200000000180003000000010200000000000520000000270200000102000000000005200000002002000001020000000000052000000020020000`"
/f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKCR\APPID\wsbexchange.exe`" /v AppId /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v `"Application Identifier`" /t REG_SZ /d Exchange /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WindowsServerBackup\Application Support\{76fe1ac4-15f7-4bcd-987e-8e1acb462fb7}`" /v CLSID /t REG_SZ /d `"{D8A2E312-3B17-4293-B71E-CD72A7C04BF3}`" /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows
nt\currentversion\WSBAppExchangeHelper`" /v AutoMarkDbRecoverable /t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$reg" -Args:"add `"HKLM\Software\Microsoft\windows nt\currentversion\WSBAppExchangeHelper`" /v AutoMountOnPITRecovery
/t REG_DWORD /d 1 /f"; Start-SetupProcess -Name:"$servicecmd" -Args:"create wsbexchange binpath= `"$WsbBinPath`" type= own start= demand error= ignore obj= LocalSystem DisplayName= `"Microsoft Exchange Server Extension for
Windows Server Backup`""; Start-SetupProcess -Name:"$servicecmd" -Args:"description wsbexchange `"Enables Windows Server Backup users to back up and recover application data for Microsoft Exchange Server.`""; }"
was run: "Process execution failed with exit code 1.".
Process execution failed with exit code 1.
Elapsed Time: 00:00:02
Finalizing Setup
Cancelled

Hi,
Please make sure the account has required permissions: Schema Admins, Domain Admins, Enterprise Admins, and Organization Management.
And please check if you have meet the prerequisites for Exchange 2010 installation.
Exchange 2010 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(v=exchg.141).aspx
In addition to the prerequisites, we also need to prepare AD and domain for Exchange 2010.
Prepare Active Directory and Domains
http://technet.microsoft.com/en-us/library/bb125224(v=exchg.141).aspx
To narrow down the issue, I recommend you check the setup log to see if there is any clues.
Best regards,
Belinda
Belinda Ma
TechNet Community Support

"The Connection to Microsoft Exchange is unavailable" when adding second Exchange account to Outlook 2013

I have a problem that I've found to be typical, just haven't found anything that describes my exact problem.
I'm having trouble adding a second Exchange 2010 server account to Outlook 2013 in one of the computers of the domain. Outlook 2013 will complain with "The Connection to Microsoft Exchange is unavailable. Outlook must be online or connected to complete
this action".
I've Googled and found many threads with the same error... however most of those seem to be either a problem with the server, or the Global Catalog in Active Directory, or the "connection method" (I've tried all found solutions to no avail).
This is not the case, since the first account is added with absolutely no problem. It can send and receive and I can delete the outlook profile and recreate it and it'll give no problems. I have this problem only when adding a second account.
This is a fresh Windows 8.1 install with an up-to-date Outlook 2013. I have other computers in the same domain and network, with the same setup (Win 8.1 + Outlook 2013) configured with two exchange accounts with no problem.
There are no connectivity problems, I can access that same account through OWA and in other computers on the network... the Global Catalog seems to be fine (shows two active DCs, which is correct).
I've tried deleting and recreating the outlook profiles, repairing the outlook installation, even deleting all outlook files in AppData and letting it recreate them, with no success.
Any hints of what could be going on?
Before I speak, I have something important to say.

Hi Javier,
Thank you for the update.
I have tested on my lab and get following result.
Lab: Exchange 2010, CAS Array (CAS01+CAS02), MBX01, DC
Type Server Field
Check name result
Changed Server Field
CAS01.domain.com
Yes
CASArray.domain.com
CASArray.domain.com
Yes
CASArray.domain.com
DC.domain.com
Yes
CASArray.domain.com
MBX01.domain.com
No
"The Connection to Microsoft Exchange is unavailable"
Based on my knowledge, the reason why inputing DC FQDN in the Server Field fixes this issue is that Outlook performs AD Lookup and finds the account configuration from AD, then back the CAS Array FQDN in the Server Field instead of DC FQDN.
Exchange 2010 is different from Exchange 2013, if you are using Exchange 2013, we need to input MailboxServerGUID.domain.com into Server Field.
If there is anything I’ve misunderstood, please don’t hesitate to let me know.
Thanks,
Steve Fan
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here

Exchange 2010 install corrupted, need help to remove and reinstall

Completed a fresh install of Exchange 2010 on Windows Server 2008 R2, the install went without any issues, however when opening either the EMC or EMS there is no access, continue to get the following errors in the event log.
Application Log:
Log Name:      Application
Source:        Microsoft-Windows-IIS-W3SVC-WP
Date:          5/21/2014 8:54:34 AM
Event ID:      2280
Task Category: None
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      TFServer4.TFSNET.local
Description:
The Module DLL D:\Exchange2010\Bin\kerbauth.dll failed to load. The data is the error.
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="Microsoft-Windows-IIS-W3SVC-WP" Guid="{670080D9-742A-4187-8D16-41143D1290BD}" EventSourceName="W3SVC-WP" />
    <EventID Qualifiers="49152">2280</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-05-21T12:54:34.000000000Z" />
    <EventRecordID>8904</EventRecordID>
    <Correlation />
    <Execution ProcessID="0" ThreadID="0" />
    <Channel>Application</Channel>
    <Computer>TFServer4.TFSNET.local</Computer>
    <Security />
</System>
<EventData>
    <Data Name="ModuleDll">D:\Exchange2010\Bin\kerbauth.dll</Data>
    <Binary>7E000000</Binary>
</EventData>
</Event>
I have attempted to reregister the dll and also to replace it however it did not solve the issue, the instance of Exchange can not find the server and or the database on startup. I have attempted to uninstall all the Exchange rolls and have been able to
remove all but the mailbox and Management Tools, when I do I receive this:
Summary: 3 item(s). 2 succeeded, 1 failed.
Elapsed time: 00:00:11
Configuring Prerequisites
Completed
Elapsed Time: 00:00:00
Mailbox Role Prerequisites
Failed
Error:
Uninstall cannot continue. Database 'Mailbox Database 1047019462': This mailbox database contains one or more mailboxes, mailbox plans, archive mailboxes, or arbitration mailboxes. To get a list of all mailboxes in this database, run the command Get-Mailbox
-Database <Database ID>. To get a list of all mailbox plans in this database, run the command Get-MailboxPlan. To get a list of archive mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Archive. To get a list of all
arbitration mailboxes in this database, run the command Get-Mailbox -Database <Database ID> -Arbitration. To disable a non-arbitration mailbox so that you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID>. To disable
an archive mailbox so you can delete the mailbox database, run the command Disable-Mailbox <Mailbox ID> -Archive. Arbitration mailboxes should be moved to another server; to do this, run the command New-MoveRequest <parameters>. If this is the
last server in the organization, run the command Disable-Mailbox <Mailbox ID> -Arbitration -DisableLastArbitrationMailboxAllowed to disable the arbitration mailbox. Mailbox plans should be moved to another server; to do this, run the command Set-MailboxPlan
<MailboxPlan ID> -Database <Database ID>.
Click here for help...
http://go.microsoft.com/fwlink/?linkid=30939&l=en&v=ExBPA.14&id=4a96fd69-9cec-4a48-9571-5c9e8ab3cfe9
Elapsed Time: 00:00:00
Organization Prerequisites
Completed
Elapsed Time: 00:00:01
Since I do not have access to EMS and can not perform any of the necessary requirements to remove the mailbox role and uninstall all of exchange and attempt a reinstall.
Any help with this would be most appreciated.

Thank you for the reply, I have checked the applicationHost.config as indicated, and the path shown is the same as in the error message, there is no D:\Exchange,Server\V14\Bin\ path, it is as indicated in the error D:\Exchange2010\Bin\. Here is the section
from that applicationHost.config file:
<add name="CertificateMappingAuthenticationModule" image="%windir%\System32\inetsrv\authcert.dll" />
            <add name="UrlAuthorizationModule" image="%windir%\System32\inetsrv\urlauthz.dll" />
            <add name="DigestAuthenticationModule" image="%windir%\System32\inetsrv\authmd5.dll" />
            <add name="IISCertificateMappingAuthenticationModule" image="%windir%\System32\inetsrv\authmap.dll" />
            <add name="IpRestrictionModule" image="%windir%\System32\inetsrv\iprestr.dll" />
            <add name="kerbauth" image="D:\Exchange2010\Bin\kerbauth.dll" />
As indicated in my post, I have replaced the kerbauth.dll from another functioning exchange 2010 installation and it has not corrected the issue.
At this point I am looking for a solution for removing the mailbox role and being able to complete the uninstall of exchange and perform a clean install.
Any additional help with this is very much appreciated.

Exchange 2010 SP3 - How many Calendar Items/Folders can you create under "all public folder"

Hi,
Is there a limitation on how many calendar items/folders you can create under "all public folder" in Exchange 2010 SP3?
Thank you

I don't believe you can create calendar items under the root folder, but it's been so long since I worked with a system that had public folders that I'm not sure. If you mean "a folder that can contain calendar items", that is not a calendar
item itself.
Now, I believe your underlying question is, "How many folders can be created at the root level of the public folder hierarchy?" If so, there is no simple limit that I know of (you can have thousands, if you really want), but management gets
pretty unruly with the more that you have. I normally recommend that you create sub-folders to logically meet your requirements, then have each of these with more folders (normally that only specific groups of users will be able to access or add items
to). And anyone will tell you that you want to restrict anyone from creating their own folders at the root level. In fact, this is the default setting for a new Exchange 2010 installation.
I'll add that you really should stop trying to use public folders, since there are newer technologies (SharePoint, for instance) that work much better and are much easier to use.

Cannot install Exchange 2010 on Win Server 2k8R2

I am working in a Hyper-V lab trying to install Exchange 2010 on a Windows Server 2008 R2 server. When the installer gets to the Readiness Checks it keeps failing on the Client Access Role prerequisites, and Mailbox Role prerequisites with the following 2 errors:
Unable to read data from the Metabase. Ensure that Microsoft Internet Information Services is installed.
Unable to access the 'Default Web Site' on this computer.
I have checked in Server Manager and IIS is definitely installed.
I opened the IIS Manager, and from there I *can* browse to the Default Web site.
For the 1st message, there is a link to http://technet.microsoft.com/en-us/library/aa997645.aspx, but that site doesn't contain any useful information for Exchange 2010.
For the 2nd message, there is a link to http://technet.microsoft.com/en-us/library/aa997698.aspx, but I tried that and still get the same error.
Any help is greatly appreciated.
Thanks
James.

Can you make sure that you have installed the pre-requisites for Windows 2008 R2? You may run it again which will install if some components of IIS are missing...
Open Powershell with elevated rights using "Run As Administrator", and run below cmdlets to install prerequisites...
Import-Module ServerManager
Add-WindowsFeature NET-Framework,RSAT-ADDS,Web-Server,Web-Basic-Auth,Web-Windows-Auth,Web-Metabase,Web-Net-Ext,Web-Lgcy-Mgmt-Console,WAS-Process-Model,RSAT-Web-Server,Web-ISAPI-Ext,Web-Digest-Auth,Web-Dyn-Compression,NET-HTTP-Activation,RPC-Over-HTTP-Proxy -Restart
Set-Service NetTcpPortSharing -StartupType Automatic
Exchange 2010 Prerequisites
http://technet.microsoft.com/en-us/library/bb691354(EXCHG.140).aspx
Exchange 2010 RC: Quick Installation Guide
http://www.messagingtalk.org/exchange-2010-rc-quick-installation-guide
Amit Tank
MVP: Exchange Server | MCTS: Microsoft Exchange Server 2010, Configuration
MCITP: EMA | MCSA: M | Blog: http://ExchangeShare.WordPress.com
Thanks a lot!
I wonder why the Exchange 2010 installation doesn't just install these features automatically. I guess it's not that hard to let these PS commands run prior to installing Exchange 2010 files.
Ruud van Strijp
Ruud van Strijp - Network Infrastructure Design in the Netherlands. MCSE: 70-270, 70-284, 70-290, 70-291, 70-294, 70-297. Cisco: CCNA, CCDA, CCNP, CCDP.

Recover CD key for Exchange 2010

Hi,
I have to move our Exchange 2010 installation to another physical server as the current one is quiet unstable.
But I can't find our Product Key / CD Key.
Is there any way to retrieve it?
Best Regards,
Thomas

Yes, you were wrong. You can't share product keys between different versions.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you. Thank you! Damir

Remove inaccessible/inactive exchange 2010 server

I had a second exchange 2010 server with a DAG setup between the primary production exchange 2010 server and the secondary one which was at our DR site. I did a DR test and ended up having to break the DAG and mount the DB manually for the DR test. AS a
result this second exchange server has been switched off and I have removed the DAG from the production side and all is ok with that. I am planning to move to a netapp exchange replication solution instead of dag for DR. As the DAG does not work well as a
DR solution.
The only problem that remains is that I still have the old server listed under servers and there is a public folder database that is still listed from the second server. Is there a way to remove this inasscible server from exchange without doing it through
ASDIedit? There is no way that i can turn this second server on again.

Your first option is to uninstall normally as commented by Ed.
If no way you can uninstall (in a documented way), then you can go with the final option of cleaning up from active directory. But take a backup of the active directory system state before doing this to be safe.
http://social.technet.microsoft.com/Forums/exchange/en-US/1c638bdd-67ba-44dd-996d-882be5fe5b09/remove-failed-exchange-2010-servers-that-are-no-longer-accessible?forum=exchange2010
http://windowsitpro.com/exchange-server/how-uninstall-stubborn-exchange-server
Thanks, MAS
Please mark as helpful if you find my comment helpful or as an answer if it does answer your question. That will encourage me - and others - to take time out to help you.

Exchange 2010 users cant change password in OWA when Cas server is Exchange 2013 cu3

Running Exchange 2010 and 2013 in mixed mode. users who is still on Exchange 2010 cant change password in OWA. It worked when it was clean Exchange 2010 installation. Password change is working for users migrated to 2013
LS

Hi
Please follow the below blog which will help you in solving this issue
http://technet.microsoft.com/en-us/library/bb684904.aspx
Note: Be careful while modifying the registry settings.
Please mark as helpful if you find my contribution useful or as an answer if it does answer your question.That will encourage me - and others - to take time out to help you.
Regards,
Sathish

Migrating From Exchange 2010

I am in the process of migrating from Exchange 2010 to Exchange 2013. I have all mailboxes migrated to Exchange 2013 and am ready to eliminate Exchange 2010 in its entirety, but I am unsure about public folders. We have no public folders other
than the default ones generated during the Exchange 2010 installation. I can't find anything in any of the migration guides that explain what I need to do in this case. Do I need to migrate anything, or can I just uninstall Exchange from the server
and ignore the default public folders?

Thanks. We had one person using Outlook 2003 years ago, but that has since been replaced with Outlook 2010. I was able to remove the "Calendar" folder that appeared in the Public Folder Manager (took me a while to see the "Delete"
link) and was able to proceed. It does not appear that I have caused any problems.

Second Exchange 2010 installation

Similar Messages

Maybe you are looking for