Second Generation Airport Express (MC414LL/A with two ethernet ports))

The link http://manuals.info.apple.com/en_US/AirPort_Express_Setup_Guide.pdf (page 7) still points to the first generation Airport Express (802.11n - Part FB321LL/A).
Can anyone provide a working link to the User Manual?
Is WDS supported on this dual mode device?

The new manual is now available.
http://manuals.info.apple.com/en_US/airport_express_80211n_2nd_gen_setup_guide.p df

Similar Messages

I have a second generation airport express and i cant manage to extend my wifi

I have a second generation airport express and i cant manage to extend my wifi

So im going to need another airport express to extend my wifi wireless
That is correct.
One AirPort will connect to your router with a short Ethernet cable and be configured to "create" a wireless network.
The second AirPort will be configured to "extend" a wireless network.

Can my first generation airport express be used with airplay using iOS 7.1.2? It stopped working after one of the big iOS updates.

I have a first generation Airport Express. Although it appears on the Airplay screen on my iPad and iPhone 5 (using iOS 7.1.2) the music does not play through the Airport Express. The Airport Express does function correctly when I stream music via iTunes from my desktop computer, so I know that the device is working. The Airport Express firmware version 7.6.4 is up to date.

Hello lorifromminn,
The article linked below details some useful troubleshooting steps and information that can help get AirPlay working on your iPad.
iOS: Troubleshooting AirPlay and AirPlay Mirroring
http://support.apple.com/kb/TS4215
Cheers,
Allen

Problem with two ethernet ports?

There is little consistency to this, but I'm wondering if anyone else has a similar problem. I upgraded to 10.6 on my Mac Pro. I have two ethernet connections which run concurrently in my network setup - one internally addressed, using a manual IP with DHCP, the other an external address with a static IP. On an inconsistent basis, opening pages in Safari will result in failures because I am apparently not connected to the internet, despite the fact that I am - Mail continues to work fine, server connections remain, etc., etc. The only way to get Safari to work again is to disable one of the ethernet ports. Reenabling it after I have successfully made a Safari connection does not then break the connection again - it keeps running for quite a while. The problem seems to become more apparent when I open a selected group of links into tabs - some will be successful, most will fail. Ideas?

Snoop Dogg thanks for the reply.
Port ONE was set to auto DNS. I did exactly as you suggested, I even tried a to do a manual ip address, etc but no luck. What finally worked is, I moved the port one cable to port two (which was empty) and bingo it worked.
It seems that snow leopard may have some issues with dual ethernet port machines, but why port two worked and port one didn't is beyond me. I will try to reverse it back to port one and see what happens. Fortunately I don't need two port at this point.
Cheers, Terry.

Serversetup -sethostname with two ethernet ports

I have added a 4 port gigabit card with link aggregate to the headnode of our cluster. I have set up this aggregate port on a second subnet (192.168.2.1). I have the nodes resolving to my head node through their second port to this gigabit card. I can ssh into either port now on any given node (e.g., en0 and en1).
For each node, I have the hostname for the first port (en0) set as nodexx.cluster.private and for the second port (en1), which I've just added, pnodexx.cluster.private. When I ssh into the node via en0 I get the prompt:
node02:~ admin$
When I ssh to the node via en1, I get the prompt:
node02:~ admin$
But I would expect to get:
pnode02:~ admin$
I was going to ssh into the node through en1 and do a serversetup -sethostname pnode02 but I'm afraid this will reset the hostname for en0, which I do not want to screw with.
Will this work as expected if I do the serversetup -sethostname?
Xserve G5 Dual 2GHz Mac OS X (10.4.6)

Your machine will only have one hostname, regardless of the number of interfaces it has. If you try to change the hostname to pnode2, that's what it will be.

Looking for an Access Point with 2 Ethernet ports

Hi,
I am looking for an AP with two ethernet ports. Is there any model of Cisco is available with 2 ethernet ports?
Regards,
Noman

pros:
If an access swich/switch port failed then AP still forward traffic through other switch once power restored through other port.
when PoE failed on its connected switch, it may still work via other port.
Having two ethernet port on AP may require to talk to different switches/stack to achieve AP port redundancy through lag or stateful switch over when cable/switch/AP port failure.
if one physical port become bad on AP, it can be still used with other.
(However, AP/physical port failure can be takencare at RF level using self healing.)
cons:
require additional switch and its config maintanece
currently, AP doesn't require 2 physical port for data transfer perspective.
Require x2 PoE ports.
Additional port increases the cost on AP.
it is possible cisco may make it in future.

AirPlay Compatible with older generation AirPort Express?

Hi everyone,
We are building a new flat and I am planning on installing ceiling speakers into each of the rooms. I will have the speakers connected into Airport Express units so that I can stream audio to different rooms.
Question, the older generation (2004/2005, M9470LL/A) model Airport Express was compatible with AirTunes. Is it also compatible with streaming audio through AirPlay? Or does this ONLY work with the new AirPort Express (802.11n model)?
I am running a 802.11g (and ethernet) network currently so don't require the new 802.11n function of the new AirPort Express, would prefer to go with the cheaper option and buy the older generation if it is compatible with AirPlay.
Thanks!

AirPlay requires that the AirPort Express Base Station run 7.4.2 or later firmware. In turn, this version of firmware can only run on the 802.11n base stations ... so, the older 802.11g Express will not fully support AirPlay.

HT1218 How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

How can I make my first generation AirPort Express work with Mountain Lion? I have a 13" MacBook Pro (non-retina).

Hi guys, recently had the same issue. You require an older version of Airport Utility to configure the older Airport Express. It can be found here.
http://www.google.com/url?sa=t&rct=j&q=airport%20utility%205.6%20for%20lion&sour ce=web&cd=1&ved=0CFMQFjAA&url=http%3A%2F%2Fsupport.apple.com%2Fkb%2FDL1482&ei=Ip MBUPLwLoq42wW4puXMBA&usg=AFQjCNGOFUPMM0ZjsKeyj5CcL2oe9Eaf7A

How do I control a first generation airport express with 10.8.2?

How do I control a first generation airport express with 10.8.2?
I have an old airport express that one of my machines running mountain lion will not support. If I upgrade all of my systems to mountain lion, is there any way I can still control and configure the airport express?

You may need Airport Utility v. 5.6
http://support.apple.com/kb/DL1482
It does work with Mountain Lion.

1st generation airport express base station not showing up in network utilities

when i plug it in the amber light appears and sometimes blinks and/or sometimes steady. needless to say my desktop imac is not picking up its signal. what do i need to do to make it work or is it just not compatible with my new mac?

Your new iMac should not have any issues connecting to the 1st generation AirPort Express Base Station (AX).
When having difficulties accessing the AirPort thru the AirPort Utility, try the following, in order checking accessibility with the utility after each step:
Check the local connection. If you are trying to access the AirPort wirelessly, make sure that you are connected to its wireless network before running the AirPort Utility to administer it. If you are still unable to access it with the utility, temporarily connect your computer directly using an Ethernet cable to one of the base station's LAN ports.
Power cycle the base station. Remove the power adapter's plug from the power outlet, and then, wait 15 seconds before plugging it back in.
Perform a "factory default" reset on the base station.

I can't access my 1st generation airport express devices using airport utility

I have a new Motorola Surfboard Extreme wireless cable modem & router set-up on my main internet cable line. To it i've connected 1st generation airport express using an ethernet and extended it with another 1st generation airport express so i can connect to itunes and a remote printer. When I go to Aiport Utility to perform the set-up, i'm told i need to update to version 5.6. When installing Aiport Utility 5.6 I receive an error prior to completion which prevents me from performing the set-up or even seeing the two airport express devices in the program. Anyone have any ideas on how to fix this?

By "1st generation" AirPort Express are you referring to the 802.11g or 802.11n model? Version 5.6 of the AirPort Utility would be required to administer the older 802.11g Express.
If you do have an 802.11g model, are you actually running OS X 10.7.5 on your Mac?

Sharing airport express internet connection with router and wired network

Dear,
I want to set up the following network, but can't succeed.
Components:
2 Powermacs quad G5's (airport and two ethernet ports)
2 Powerbooks G4 (airport and 1 ethernet port)
1 broadband wired router (1 Wan and 4 Lan ports)
1 airport express
1 cable internet connection.
1 LaCie Ethernet Disk mini 300 GB
The internet connection is at the other site of the office (little architecture office). It is not possible to get the internetconnection directly to the desk wth the computer. 1 Powermac G5 is set up to share his internet connection. (Share via airport with ethernet 1). The ethernet 1 port is connected to the Wan port of the wired router. The other Powermac G5's ethernet 1 port is connected to Lan 1 of the router. The LaCie Ethernet Disk mini 300 GB is connected to the the Lan 2 of the router.
All the conputers get their IP adresses bij DHCP. The router is set to distribute IP adresses. Without the router and the LaCie everything works fine. There is internet connection on every computer and filesharing in between them is possible.
I like to be able to do the following.
Use airport connection on the two powerbooks, for internet and access to the network. Use the wired connection between the powermacs and the lacie for filesharing. On the second powermac use internetconnection through the router. With this configuration is it possible to copy files fast between the powermacs and the lacie harddisk.
At the moment I'm trying to get internet connection on the second powermac. The ethernet port gives me a proper IP-adress and tells me that I can connect to the internet, but it won't let me go on the internet and when I turn the airport back on, safari buggs. Without the ethernet cable connected I can go on the internet without anny problem, but off cours the fast filesharing isn't possible any more.
A drawing of the desired network can be downloaded at the folowing website
http://homepage.mac.com/maesen_jeroen/FileSharing14.html
Is there a possible sollution to this problem?
thank you verry much
Jeroen

Disable the DHCP server on your wired router. Since your Power Mac G5 Jeroen is sharing Internet, it is already providing DHCP.
Use airport connection on the two powerbooks, for internet and access to the network.
Sorry, but it is not possible for the PowerBooks to access the subnet created by the Power Mac G5 Jeroen.
Use the wired connection between the powermacs and the lacie for filesharing.
Shouldn't be a problem.
On the second powermac use internetconnection through the router.
On Power Mac G5 Jeroen, you will need to disable the firewall or open the ports through the firewall needed by Power Mac G5 Nico to access the Internet.
Is there a possible sollution to this problem?
What you have is incredibly complicated. A much simpler solution is to
Get a 2nd AirPort Express (AX).
Use WDS to wirelessly connect the 2 AXs.
Connect an Ethernet switch (or hub) to the Ethernet port on the 2nd AX.
Connect all of your Ethernet clients (2 Power Mac G5s and LaCie) to this switch (or hub).
In this configuration your PowerBooks will have wireless access and all of your Ethernet devices will get IP addresses from the AX connected to the Internet.

What is the ip port number for a 1st generation airport express

I have recently upgraded my home wireless router from a Linksys EA2700 to a EA6500. The EA2700 worked fine with my 1st generation Airport Express. Since I have mavericks on my laptop (Airport Utility 6.x is incompatible with Airport Express/b/g) I used Airport Utility 5.6.1 on my Windows 7 laptop. When I goto select my home wireless network in the APU drop down menu to select a network, my home wireless network never shows.
Linksys says it might be a problem with port forwarding and they need to know the ip port number of 1st Generation Appler Express.
Thanks. -Rob

AirPort Utility can be used to configure and change the settings on any of the AirPorts.
If you have a Mac, AirPort Utility is here:
Macintosh HD > Applications > Utiltiies > AirPort Utility
If you have a PC, AirPort Utility for Windows is on the disk that came with the AirPort Express

1st generation AirPort Express - no software

I'm still using a 1st generation AirPort Express ... there's nothing wrong with it, it's still doing its job just as good as when it was new.
But there's a big problem.
The latest AirPort Utility (6.x) doesn't support this device, so I can't go in to re-configure it, even though it's still connecting everything fine.
I can't even download the last utility that supported the device either, because it's not supported under my latest OS, which is Yosemite.
(AirPort Utility 5.6 for Mac OS X Lion)
Any advice, besides buying a new AirPort? It's crazy to have to buy a new basestation just because it's a few years old and the only utility on your computer can't simply talk to it.

Why would you say that?
Because it is correct.
The model number is A1084, which is 1st generation
No, it is not, according to Apple. A 1st Generation AirPort Express is model number A1264. Apple began to use the Generation naming with the introduction of wireless "n" products in 2008.
Hopefully, the screenshot to illustrate that will appear below, but Apple is having problems with screenshots on the forums displaying correctly. If he screenshot does not display, let us know and I will post some links for you.
A1084 is a much older wireless "b/g" version of the Express, which was sold long before Apple began to use Generation naming on the AirPorts.
The A1084 was introduced in June 2004 and discontinued in March 2006.
I have AirPort Utility 6.3.4, and when I click on my A1084 base station, a message pops up that says "This version of AirPort Utility doesn't support this base station."
Correct. AirPort Utility 6.3.x introduced in Lion, and carried into Mountain Lion, Mavericks and now Yosemite does NOT support the older "b/g" versions of the Apple Airport routers.
If you want to be able to administer the older 10 year old AirPort that you have, I gave you the information needed above. It is repeated again here........
You can use, or borrow, a Mac running Leopard (10.5.x), Snow Leopard (10.6.x) or a PC with AirPort Utility installed on the computer to administer the old AirPort Express.
Yes, the model I have is at least 8 years old. It's about 10, but it still works perfectly fine ...
That is great. You can still use it if you follow the instructions that I provided above.
But, any version of AirPort Utility 6.x cannot be used to administer the A1084 version.

Airport Express Not Working With Netgear Router

I have two Airport Expresses connected to my Netgear WNDR3300. I run Windows 7 on all my computers. One express works fine, wirelessly streaming music in several rooms. However, the other does not work unless it is plugged into my router. When it is unplugged and I try to connect to it via iTunes I have a "connection timed out" message. Genius wasn't able to help me, and the Apple support won't help me over the phone because the express is out of warranty. It is a 1st generation Express, but was working fine until I installed the newer express. Can anyone help?

I am sorry that I don't have a definitive answer but I also have Windows computers and I have "inherited" some older Apple devices from my son and am trying to learn about them so in addition to searching this group, I "Googled" "1st generation airport express" and it listed many specific posts in this group - I read them all and they might answer your question - good luck

Second Generation Airport Express (MC414LL/A with two ethernet ports))

Similar Messages

Maybe you are looking for