Second Hard drive cable/accessory

Hi Everybody,
I have a HP ENVY 17TS laptop and want to add an SSD drive. I see that there is an empty drive bay. Where can I find the cable/connector and associated drive kit? I could not find on the HP.COM site.
Thanks a lot in advance,
Dinesh
This question was solved.
View Solution.

Hi,
For adding an SSD drive to your notebook. I have included the 'HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook PC HP ENVY TouchSmart 17 Notebook PC - Mainten...'. On page 48 Hard drive it will give you the part numbers of the different drives that are compatible with your system. The ones that are marked as hybrid are both HDD and SSD. As well provides you with instructions on how to connect the SSD to the notebook.
As well I have also included the document, 'About Solid State Hard Drives'. This has different bits of information, on maintaining and checking different parts of the hardware.
Please let me know if this helps, thank you.
I worked on behalf of HP

Similar Messages

Can I add a second hard drive and if so what cable etc would I need to do so?

Can I add a second hard drive and if so what cable etc would I need to do so?
This question was solved.
View Solution.

Hi,
For many 17" (or 17.3") machines such as Envy 17, dv, Pavilion 17 .... you can add a second HDD (my old loan dv7 has two HDD's and my current loan Envy 17 also has 2 HDD's). You would need the following kit:
http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

No power supply cable for second hard drive

Hard drive in PC is crashing mechanically. Want to ghost a second hard drive before first drive crashes completely. Bought duplicate of existing hard drive, but there is no power supply cable/connector for it. Have SATA plug, but cannot power up second hard drive. What do I do?
This question was solved.
View Solution.

LB1815, welcome to the forum.
If I understand your problem correctly, this is the connector that you need. It converts a single SATA power cable to two connectors. This allows you to connect two drives with on cable. There are many other brands available on Newegg. This is just one example.
Please click the "Thumbs up + button" if I have helped you and click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Pavilon 500-319na can I install a second hard drive

pavilon 500-319na second hard drive
Options
‎01-02-2015 09:30 AM
Operating System: Windows 8.1
I bought an HP Pavilion 500 - 319na desktop in summer and want to install a 2nd hard drive. There are spare connections on the board and the power cable to the internal hard drive has a spare connection. From what I read it needs to be SATA 3. I have read conflicting advice on this board. Some say yes, some say no.
OK, there seems to be only one bay (a poor oversight by HP) but provided I find a way of securing another drive is there any reason why it should not work.
From what I read it should be max 2Tb's.
I want a definitive answer please!
Win 8.1 64 bit.
This is the hard drive I plan to buy. The spec says XP, Vista, Win 7, but am I right in thinking it should work with win 8.1
http://www.pcworld.co.uk/gbuk/components-upgrades/internal-hard-drives/3-5-inch-hard-drives/toshiba-...
This question was solved.
View Solution.

As I said to you in the other cross posting (desktop hardware):
You can obtain 3.5" hard drive cage from here for $11 shipped. Granted it has a 120mm fan and space for 4 drives, but for the price, you can mod/cut all you want.
Now your other issue/question: You will want a SataIII 6GB/sec drive 2TB, 7200 RPM.
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

How do I add a second hard drive to my dv7-3060us?

I'm very short of space on my HP originally installed 500GB hard drive and need more storage space. I have a new Seagate 750GB drive, 7200 rpm, and would like to install it. When I opened the case to access the second hard drive compartment, I was stymied when I found no connectors pre-installed. What do I need to do to install this drive?
Thanks!
This question was solved.
View Solution.

Hi,
Lost power for 40mins. Please try this:
http://partsurfer.hp.com/Search.aspx?SearchText=605415-001
the links before shows BOTH caddy and cable for dv7 machines. This articel may help:
http://thessd.com/2012/02/how-to-add-a-2nd-hdd-or-ssd-to-an-hp-pavilion-dv7-laptop/
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

What do I need to install a second hard drive in my Pavilion dv7-6b77dx?

I have a HP Pavilion dv7-6b77dx Entertainment laptop and want to install a second hard drive in the second empty bay. I have a 32o Gb drive but I need the cable to hook it up. Where can I find the proper cable?

Hi, you can order the hard drive upgrade kit here:
http://h20141.www2.hp.com/Hpparts/Search_Results.aspx?mscssid=92A6CF5069A84DB8994705680353B526&Searc...
The service guide for your PC is here http://h10032.www1.hp.com/ctg/Manual/c03043778.pdf
-Bryan
I am an HP employee

Question - Need Advice Regarding Second Hard Drive On HP Pavilion dv7t-4100 Notebook PC

Hi,
I currently have a HP Pavilion dv7t-4100 Notebook PC, and my hard drive failed (luckily while still under warranty!). So I contacted HP support and they are in the process of sending me a replacement hard drive, so that I may install it. When I opened the back of the notebook, I realized that a second hard drive could be installed, if desired. I would be interested in doing this! My current primary drive was (and will be again) a Toshiba 1 TB Internal hard drive Serial ATA-300 2.5" 5400 rpm, model MK1059GSM. I understand (from reading a previous post) that for the second hard drive, I will need to purchase a "2nd HDD Caddy & Cable for HP dv7-4000, dv7-5000, dv7t SE" (the purchase link the tech in the other post referred to was http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345); and now I need to decide on the size (and other stats) of the hard drive that I will buy to install and used as the secondary drive. The HP customer service rep I spoke with on the phone about my primary drive replacement said that it is usually recommended to not go any higher (in capacity) than the primary drive, for the second drive, to ensure a more "stable" system (but I am not sure about the level of"technical" knowledge he has about the inner workings of the notebooks). However, from my upgrading experiences with desktop PCs, I was usually able to go as high in capacity as I could/desired; as long as the physical size of the drive was the same, and it was compatible with my system. And I usually did choose to go with a larger capacity second drive, as this was where most of my data and media files were stored (with the primary being used for mostly operating system and system files). This is my first time "upgrading" a Notebook, so I wanted to check with the techs here on the board- would it be a problem for me to go with a secondary drive larger than my primary drive's 1TB capacity? Also, are there any other factors to consider and keep in mind when selecting a second hard drive? Any advice and replies will be greatly appreciated. Thanks so much for your help with this! -Brian

You should be able to go as high as 2TB.
I also own a,(Older), DV7 notebook which has dual drive capability.
I bought my caddy from the place recommended and got everything needed including screws !
I matched the capacity in mine with an exact same hard drive and have never had a problem.
Minor battery life noticable but that was it.
Your system BIOS is what will hold you back from say a 3TB drive.
You can go to HP site and check the specs on your model and find out for 100 % sure.
HP Support & Drivers | United States
I would recommend doing what I did and match the drive exactly.
Good day !

HP ENVY TouchSmart m7t-j000 Notebook PC - Adding a second hard drive

Product Number: E4S80AV
I'm having a hard time finding a SATA III cable and caddy for a second hard drive for my laptop. Any ideas? Right now, I just have an extra 1.8 inch drive I can't use.
Robert

Please see HP ENVY Notebook HP ENVY TouchSmart Notebook HP ENVY 17 Notebook PC HP ENVY TouchSmart m7 Notebook P... for a complete list of parts used in these models. Additionally the MSG states;
Hard drives
Supports 6.35-cm (2.5-in) hard drives in 9.5-mm (.37-in) and 7.0-mm (.28-in) thicknesses (all hard drives use the same bracket)
Customer-accessible
Serial ATA
Supports the following hard drives:
● 1-TB 5400-rpm, 9.5-mm
● 750-GB 5400-rpm 9.5-mm
● 500-GB 5400-rpm 9.5-mm and 7.0-mm
Dual hard-drive configurations:
● 2TB: (1-TB 5400-rpm x 2)
● 1500GB: (750-GB 5400-rpm x 2)
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Adding and configuring a second hard drive in a Power Mac G4

I am using a Power Mac G4 with the original 20GB hard drive and running OS 9.2.2.
I would like to upgrade to 10.4 (Tiger) installing it on a 80 GB Seagate Ultra/ATA 100 which I need to install as a second hard drive.
This is where my problem arises. From what I have read I cannot install OS 10 on a drive configured as SLAVE. On top of this Apple article ID 106728 has a note not to “change your Apple –installed disc drive to ATA ID-1 (slave) when adding other ATA devices.”
Is this article correct or am I misunderstanding it? I was hoping I could just install the new drive on top of the original and switch the configurations of the drives making my original drive the SLAVE and the new drive MASTER and just install OS X on the new 80GB drive.
Or can I put the new drive in the position of my original drive configure it as MASTER and put my original 20GB drive above it and configure it as slave?
I am hoping someone can let me know if these configurations will work.
Another question is: If I switch the position of my original drive will I lose access to the data on it?
I would like to keep the OS systems on separate drives because I need to continue to run my old software and Heidelberg scanner (SCSI, running on LinoColor Elite 5.1 for which updated drivers are not available). This will not be possible in classic. I want OS X on the larger drive as I will be loading updated software eventually and it will become my main OS system.
Power Mac G4 450GH, 768mb ram (AGP graphics ) Mac OS X (10.4) Currently running 9.2 and will be upgrading to OS 10.4

Hi, Thelisa -
Welcome to Apple's Discussions.
Is this article correct or am I misunderstanding it?
Yes, to both - the article is correct, and yes, you seem to be misunderstanding it.
In the context of the article, "Disc drive" does not mean a hard drive. Earlier in the article it states -
Solution
"Disc drive" refers to CD, CD-R, CD-RW, DVD, DVD-RAM, DVD-R, Combo drives, SuperDrives.
The reason is that on most (if not all) G4s, an optical drive must be jumpered as Master in order for it to be a bootable drive. So, if an optical drive has been jumpered as Slave, it can not then be used to boot from the OSX Install disk.
You will need to place the drive to be jumpered as Slave in the top position of the bracket (the drive sled), and the one jumpered as Master in the bottom position of the sled.
The reason for this is the location of the connectors on the IDE ribbon cable (the data cable) - the one jumpered as Master needs to be attached to the end connector of the cable, and the one jumpered as Slave to the middle connector of the cable.
Because of the physical limits of the cable itself, the one jumpered as Slave must be on top, else the connectors won't reach to the proper drive.
Which drive is jumpered as which is your choice, but the one jumpered as Slave must be on top.
If I switch the position of my original drive will I lose access to the data on it?
No.
The designation of Master or Slave is, for the most part, simply to allow the Mac to have a unique physical address for each drive, so it can tell one from the other (this is separate from the pathname addressing that the OS uses). Re-jumpering a drive nor changing its physical location will not affect its contents nor their usability.
One result that may be important sometime is when the machine in question is set up as the Target machine in a firewire Target Disk Mode arrangement - only the drive jumpered as Master will be visible on the Host machine.
Article #58583 - Firewire Target Disk Mode

Installing a second hard drive in a G4 - advice needed please

Hi......
I have a G4 Quicksilver (2002) model and I also have a G4 Digital Audio model as well which is currently surplus to requirements.....
I would like to take out the 20Gb hard drive from the older G4 and put it into the Quicksilver as a second internal hard drive (for extra storage capacity....)
I have seen the instructions regarding installing a second hard drive and it doesn't seem to complicated....
I just want to check because the 20Gb hard drive has the operating system on it for the older G4.....
Do I have to fire up the machine and erase the hard drive and then take it out and put it into the Quicksilver...?
Or am I able to simply take it out, put it in the Quicksilver and erase it when I restart the machine....?
I don't have the original installation discs for the OSX...
I talked to a Mac technician at work and he said I can just take out the 20Gb hard drive and put it in as a 'slave' drive and I have to 'bend some pins' (I think he said) when I install it.........and I can then erase the second hard drive and use it as storage.....
any advice would be greatly appreciated.....
Thanks

Hi, craigkelleigh -
Ony many drives the label showing jumper pins configurations will be on the end of the drive, just above the block of pins; on other drives it may be on the top, rarely on the bottom.
The block of jumper pins is at the same end of the drive where the data cable (wide, flat ribbon cable) and the power connector plug in.
It is best to move the jumpers before installing the hard drive - they're quite small and hard to manipulate in a confined space. Important - do not move jumper pins if the drive is powered up (running).
As far as removing and installing the drive, you can view/download a how-to PDF or movieclip from these pages -
G4 (Digital Audio) - http://docs.info.apple.com/article.html?artnum=75313
G4 Quicksilver - http://docs.info.apple.com/article.html?artnum=75314
In addition, with regard to specific jumper positions, that depends on the make (and sometimes the model) of the drive. There are some resources available on-line, such as jumper diagrams for specific drives. If you would give us the specific make (manufacturer) and model number of your hard drive (that info should be shown on labels affixed to the drive), we may be able to direct you to a specific website page with that info.

What kind and how to add a second hard drive to my dv7-6157cl?

I want to add a second hard drive, which can be done on this laptop. What type of hdd would I purchase?
Can I add a solid state drive?
Are there instructions on how to do this on this particular model?
Thank you

I would not use a SSD for a second drive, there is really no benefit to this, an SSD would be much better for the primary hard drive where the OS runs from.
Any standard laptop Sata hard drive will work
You would need a hard drive hardware kit, includes bracket, shield, screws, and data cable.
I would contact HP parts to be sure you get the correct part(s) for your specific model
Here is your service manual which has instructions on how to replace hard drives in that model

How to add a second hard drive

I want to add a second hard drive, mainly because my server hosts a photo gallery and I would like to store those photos on a separate drive. What is entailed in adding this second drive?
-Thanks

Firstly, find if you want SATA or IDE. Then make sure you have a free hole on the mobo for the drive, and spare in the case for it. Then make sure your PSU can power it. Then decide how much space you want and how much you want to pay. Then buy, screw it in, and connect the ribbon cable and power cable. Then boot, and it should come up in /dev. Then partition, and make a filesystem, then mount. Easy

W540 second hard drive

I have just ordered a w540 and I'm wondering if I can add a second hard drive (actually what I want to install is an SSD) to it. Apologies if this has been answered before, in which case I failed to find the appropriate message
Solved!
Go to Solution.

Hey guys,
I'm using my W520 now for more than 3 years and now I'm looking for a new one. I use a second ssd in my w520 and love it. This ability is a must have for my new laptop.
I've done some research and found three different adapters. They are called "Hard Drive Bay".
There is the version 3, which I have I think, ??mm: 43N3412
Then there seem to be a version 4, 9.5mm: 0B47315
And it seems there is another type, also version 3, 12.7mm: 0A65623
I'm not quite sure if the dimension means the hdd thickness or the bay thickness.
Furthermore the version 3 is listed as an official accessory for the W520. But no bay is listed for the W530!! For the W540 a list doesn't exist yet.
I hope someone can bring more light into here
Soko
W520 (4282-W17 i7-2820QM 32GB 2xSSD 1TB)| T62p | T41p

Possible to install second hard drive in Pavillion p6110f

Is it possible to install a second hard drive, 1TB Seagate, into the expansion slot on my Pavillion p6110f??
This question was solved.
View Solution.

Hi,
Your PC has a hard drive cage that will accomodate two drives. This HP How-to document starting at Removing a Drive a hard drive will show you the process for removing the hard drive cage.
If you still want to use the Expansion Bay then you will need a 5.25" to 3.5" adapter bracket. NewEgg.com would carry such a bracket. You will also need a SATA data cable. This HP How-to article will give you an idea on how to use the Expansion Bay for a 5.25" device. Check up by the existing optical drinve for a spare SATA power connector. If one is not available then you will need to use a SATA power splitter.
HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
HP Photosmart Premium C309G, HP Photosmart 6520
HP Touchpad, HP Chromebook 11
Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
Windows 7/8 UEFI/Legacy mode, MBR/GPT

Second Hard drive for HP Pavilion dv-7 3157 ca

I am looking at putting a second hard drive into my HP Pavilion dv-7 3157 ca, I know the first hard drive has a maximum size of 500 GB, but as for the second drive can it be 1 TB or is the total of both hard drive 1TB ie: 2x500 GB?
A second question, looking for a link where I can buy the caddy, cable and hard drive, as this model is not common and the info out there is very confusing.
Thanks for any help in this matter.
Cheers

Hi tony2163,
Welcome to the HP Forums! I saw your post regarding your Pavilion. You should be able to install a 1TB drive and I have the part number for Hard Drive Hardware Kit it is 517639-001. For more information about your product and breaking down the notebook go to the link below and click on the Maintenance and Service Guide.
http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=us&dlc=en&lc=en&product=4125923&
Thank you,
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Second Hard drive cable/accessory

Similar Messages

Maybe you are looking for