Second HDD bracket and interface cable for DV7 3110ea

I apologize if this has already been covered on here.
I need a hard drive bracket and interface cable to fit a second SATA HDD. I think the HP part numbers are 611935-001 for the interface and 532591-001 for the bracket.
Can anyone confirm this and possibly suggest somewhere I could get them from as the HP partmaster site was not much help.
I have found a few online suppliers of these parts and the prices vary from around £22 to £35 each. I would like to be sure they are the correct parts before ordering them.
This question was solved.
View Solution.

I got the hard drive caddy from here  http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=220690235689 They do appear to have more in stock and cost a lot less than other online suppliers I tried.
The connector was from here http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=260730251819

Similar Messages

  • HT5446 if i order a new imac with 1tb flash is that pcie based to where i could add a 3.5 ssd and does it still have the bracket and sata cable to add one in it

    if i order a new imac with 1tb flash is that pcie based to where i could add a 3.5 ssd and does it still have the bracket and sata cable to add one in it

    Be advices that the newest iMac's are basically SEALED Units and taking it apart in any way, other than removing the Memory slot cover to add more RAM (That is on the 27" model. The 21.5" is completely sealed), will void the warranty on it.
    Not only that but the screen is Glued to the aluminum casing and if you do pry it off with damaging it you'll need new adhesive strips to remount it.
    Not worth the efford or the cost when you can buy mat any other brand computer for less money and do all the upgrading you would ever want without ever voiding the warranty or breaking something in the process.

  • 2nd HDD cable for DV7

    Have a Pavilion dv7-6c00 -- It has second bay caddy but no cable.  One of the 4 screws was all F'd up from factory, had to dremel a slot into it to get it out.
    Any idea where I can find a cable that fits -- tech support wasnt much help on the phone.  But very polite.

    Hi:
    I will try to be polite, but helpful as well.
    Below is the link to the cable I believe you need.
    http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
    It's pricey, but if you wanna play, you hafta pay.
    Paul

  • Dv7t rcvd. new 4/6/2011 need interface cable for 2nd hard drive

    Subject rcvd from HP with caddy for 2nd hdd installed. No cable supplied.  called HP parts store and was referred to sales and then referred to tech support.  After several hours of chat and musical hold time I'm still without for a source for  a much wanted interface ,Hdd to motherboard, cable. No help from newmodeus.com either.  This is not a standard
    esata cable and has to be an exact fit for allocated space.  If desired to install  SSD in this model an exact fit is needed. 

    My dv7t is in the mail and I have not got it yet, I asked support via email how to add a second hard drive and they said you just plug it in, I was skeptical and now that I see this post I can see I was right to be.  
    So I would also like to know how to add a second HDD or SSD to the dv7t and how to get all the necessary parts. 
    Please Help! 

  • Oracle RAC and crossover cable for private network

    Hi,
    I have the following configuration: two database servers, each has four network cards, two for public network and two for private, cluster network. Each public card has own IP-address and both have virtual IP-address, defined in operation system (SLES-9) for redundancy. Because I have only two machines in the cluster I want to connect the two machines for private with crossover cable without switch. For redundancy I want to make two connections between machines. Is it at all possible? How should I defined all network interfaces and what should be included in /etc/hosts for properly work of Oracle cluster?
    Best Regards,
    Jacek

    Hi,
    You can build a RAC witch CROSSOVER, but the Oracle no homolog.
    As you have 4 cards, 2 to public (redundancy) and 2 to interconnect (redundancy) you need of a software to to make a TEAM, and create a card virtual that will have a IP address.
    Eder

  • Help! connections for the midi and audio cables for use with Apogee & Logic

    Newbie to mac! A Basic question, I know.
    I have:
    Logic express 8
    1 x Apogee Duet
    1 x Midi in/out interface.
    After my external sound module recieves the midi info stored in logic, it creats an audio signal.
    QUESTION!
    How do I... monitor this output with my audio recoded files in logic. so audio and midi (final mix) is played together, using the Duet?
    I understand that a seperate mixer would do the job, i have one, but i need to keep the music making and recoding process as simple as possible, otherwise i get annoyed with lots of settings and things and give up... for another year!
    All I wanna do is:
    Record one real instrument at a time. these would be Guitar, Bass and Mic. (ok, simple connections with the duet.)
    Record midi keyboard messages into logic, edit, quantise etc. rhave logic send the midi info out to my roland xv 5080, and route the audio out of the xv 5080 with the final mix.
    (I dont know if this can be done with the Duet??)??
    Whilst advoiding the use of a seperate hardwarwe mixer.
    would i have been better going for the Ultralite or something?
    Any help is much appreciated as i am struggling to get my head round the basics.

    I understand that it can be done this way, but i will be continually swapping leads. Yes a mxer wuld solve this, bu would a cheapish mixer effect the sound quality of the duet?
    could i use the digital output on roland and send to the imac's digital in? and at the same time record audio in logic. so basically this digital signal will go into imac into logic then be routed straight to the output that the duet is connected to? Would this work, is there a seting in logic where u can have more than 1 input and send this straight to the main outputs??
    ooooo, maybe thats a possibility, just hought of that. dont know if it'll work though.
    Thanks clanwork

  • CPU and motherboard upgrades for DV7-2278ca

    Hi
    I have a DV-2278ca laptop with Intel Core™2 Quad Q9100 2.26-GHz with 12-MB L2 cache and 1066-MHz FSB and ATI Mobility Radeon HD 4650 discrete graphics subsystem and 1-GB of dedicated memory.
    I want to upgrade them to something that uses second/third generation INTEL (I5/I7)
    Is it possible? if yes what are my options?
    Thanks!

    I am going to be honest here. The chances of upgrading those components is very low and not very likely to work with that notebook case.
    A second generation Core i5/i7 process is two generations away from the current processor which will require a motherboard upgrade. I'm certain you are aware of this since you mention upgrading the CPU and the motherboard. This is an issue since the case for the notebook was specifically matched to the motherboard it came with. It is possible that finding one that supports what you want and fits that case will be challenging. It can also add up in cost and risk. Risk being the components just don't work or a different feature of the notebook doesn't work any more.
    I did do some research to find other posts, in this forum and outside this forum, where others have successfully changed those components. I found plenty on replacing it with the same motherboard, but none that were specifically upgrading it. Perhaps I did not use the right search terms. Notebooks are generally intended to be as they are configured with limited upgrades available for the hard drive and RAM.
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Cable for DV7

    I'm having a ridiculously hard time finding the right cable to fit my Pavilion dv7-4071nr Entertainment Notebook. Is there anyone with experience with the eSata combo/eSata +USB hybrid port /eSatap connection to an external 7-pin hard drive connection? Seems to me this should not have been so much trouble I am beginning to think the port may be damaged but devices that are supposed to work according to chats do not fit. Help needed. Which has best in store support for HP PAVILION.? I can take it to Best Buy, Staples. Office Depot, TigerDirect, & Office Max locally.

    Hi:
    I will try to be polite, but helpful as well.
    Below is the link to the cable I believe you need.
    http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=379
    It's pricey, but if you wanna play, you hafta pay.
    Paul

  • Where would i get 2nd hdd cable for hp dv7-series (long cable) that would ship to finland.

    Where would i get 2nd hdd cable for dv7 series (long one) THAT would ship to Finland. (as the subject says eh')

    Hei:
    It depends on where in the dv7 model series your PC falls.
    There are 2 types of second HDD cables. The one Kamat pointed out for the dv7 6xxx series, and then there is this one at the link below for these dv7 series:
     http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=345&zenid=b451f3afd6d86cd...
    So, you will need to know what dv7 you have.
    I believe they ship worldwide. A forum member from Italy got his from here. That is how I know about this site, and all about the fact that there are 2 types of 2nd HDD cables for dv7's. 
    The only part number referenced for a 2nd HDD cable in the service manual is for the dv7-6xxx series.
    Paul

  • Satellite A200-1S5 - Can I use a second HDD and RAID?

    Hi all,
    Is Toshiba Satellite A200-1S5 eligible for adding a second hard drive? It has RAID controller as far a I know - could it help?
    Thanks,
    Denis

    The Satellite A200-1S5 does NOT support RAID!!!
    But some A200 could use two HDDs (but NOT RAID!!!) There are different A200 models which supports different hardware specifications.
    Therefore you can find the second bay at the bottom of the unit.
    But if there is no connector for second HDD then this means that there is no second HDD controller and you cannot use second HDD in this A200!!!
    Bye

  • Satellite P300-20H - Second HDD caddy

    Satellite P300-20H, PSPC8E
    This laptop has a second HDD bay and a second drive works in the bay.
    I have tried in vain to find a HDD caddie for the second HDD bay, can anyone point me in the right direction for the part number or a shop that sells them.
    Thanks

    I have upgraded brothers P300 with second HDD but I didnt use HDD bay. I have just fixed second HDD to stay in the same position with piece of plastic so that HDD will stay in place.
    You can also contact Toshiba service and ask for help. I am pretty sure they have such HDD bays used before and can imagine you can get one.
    Visit also eBay/notebooks and check for Toshiba hard drive caddy. I saw several bays there.

  • Is there any way to get a replacement Ribbon Cable for the Live!Dr

    I had a second Li've! and Li've!Dri've hanging around the house, and gave the spare units to a friend of mine. Unfortunately I have been unable to come across the Ribbon cable. We already tried a standard IDE cable, and while it does fit, it didn't work. Does anyone know of somewhere I can get just a replacement cable? I looked on Ebay and found a card with the dri've and the cable for 0$+ shipping, but I don't need the card or the dri've, so I thought i'd try to see what I could find.
    thanks

    very easy yes,
    Apple Superdrive
    http://store.apple.com/us/product/MD564ZM/A/apple-usb-superdrive
    This one is only $35, I have it and its well made, and works on Mac
    http://www.amazon.com/LG-Electronics-Portable-External-GP60NB50/dp/B00C2AMK2M/re f=sr_1_1?ie=UTF8&qid=1385882859&sr=8-1&keywords=lg+external+usb+dvd+drive

  • In Multimapping how can we configure the Receiver , Interface Deter for BPM

    Hi Friends ,
    I am trying the the BPM scenario using Integration Process
    BpmPatternCollectTime
    from SAP BASIS ® SAP BASIS 7.00 in the namespace http://sap.com/xi/XI/System/Patterns
    I have done the scenario like the above . I have followed all the Steps which are used in above scenario.
    I am using a File Sender Adapter and Receiver Adapter .
    It is Successfully picked up the File but nothing is happening after that .
    I am using two receiver Determination one from Ob to IP and other from IP to FIleReceiver ( IB) .
    But, I am Getting error as Block1 (No agent) Error in the PE graphical diagram
    I have checked in SWWL my Integration Process Return code is "0"
    The steps Which i have followed in BPM are
    1. Block with Deadlkine branch and Exception handler( as TimeOut Exception)
    Block Start and Block End as New Transaction
    2. Inside Block infinite Loop which contains Receive step ( Actives the Correlation ) and Multiline Container element which appends the Messages with CollectMessage
    3. Transformation Step
    It creates the New Transaction and Interface Maping from CollectMessage List to New Mesage
    4. Send Step
    It sends the New Message . It creates the New Transaction .
    Can you Please tell me how to configure the Receiver and Interface Determination for the above scenario ?
    Regards.,
    V.Rangarajan

    Hi Ranga
    have a look at these
    you can ref: this link to find example where a receiver determination step is used in BPM- http://help.sap.com/saphelp_nw04/helpdata/en/43/6211b11c895f6ce10000000a1553f6/content.htm
    More abt RD step in BPM - http://help.sap.com/saphelp_nw04/helpdata/en/14/d5283fd0ca8443e10000000a114084/content.htm
    if useful pls reward

  • How do I get my G5 to recognise my second HDD?

    I was messing with my second HDD permissions and have managed to lose the HDD from my system. I inadvertantly clicked the ownership and permissions to 'no access'.
    How do I reverse this process? Disk Utility won't let me do this. I am a mac newbie, so any simple advice would be appreciated.
    TIA

    Click on the Finder's Go menu in the menubar and choose "Go to Folder..." . In the text box that appears, enter "/Volumes/" (without the quote marks) and click "Go". You will see an alias of your drive volume there. Leave this where it it and go to the next step:
    Next, choose File>New Finder Window from the Menubar, click on the Applications item in the sidebar, and then open the Utilities folder located there. Scroll to the Terminal icon in this window, and double-click it. When the Terminal appears and stops generating text, type in the following:
    sudo chmod 775
    Press the space bar, and then click on the first Finder window you opened. Drag the alias representing the disk you need reset into the Terminal window and press Enter. You will then be presented with a password dialog; enter your administrator password there. (Note that the password will not be shown as it is being typed in.) Next, choose Log Out from the Apple menu, and then log back in again.
    Gary

  • Cat5e Voice and Data Cabling?

    Somebody  suggested me to use cat5e voice and data cabling for my restaurant so will you advice me that it will be best for me or not?
    http://telephoneguru.net/cabling/

    Cat5e would do fine. But in my opinion Cat6 is the future. If you want to future proof you can also use Cat6. Main difference is speed and interference. I think Cat6 would be costlier than Cat5e.
    Look at here: http://www.diffen.com/difference/Cat5e_vs_Cat6
    But you can use any depending on what your main concern is speed or cost and both would work with data and voice and provide poe as well.
    -Terry
    Please rate all helpful posts

Maybe you are looking for