Second HDD instead DVD HP ProBook 4740s

Hi I need help, how to add second hdd instead dvd HP ProBook 4740s.
I have:
Windows 7 pro
Second HDD WD (disk Initialization - GPT)
HP Probook 4710s 4730s 4740s HDD Caddy
The problem is that the laptop does not see it (second hdd), judging by the feeling it works. If it rearrange the main slot for HDD - hdd works and windows can be seen it.
What can be forced by the problem?

HI @Sergiy_Kravchuk ,
Welcome to the HP forum!
To get your issue more exposure I would suggest posting it in the commercial forums since the Probook 4740s is a commercial product. You can do this at:
Notebook - HP ProBook, ZBook, EliteBook, Compaq, Slate/Tablet PC, Armada, LTE.
The support page for your product may be helpful in the meantime: HP ProBook 4740s Notebook PC
I hope this helps.
Sparkles1
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

Similar Messages

Second HDD for Portege A600

Can I insert second HDD instead of DVD drive in my Portege A600-157 ?

Hi
As far as I know this is not possible with Portege A600 series.
From my knowledge some other Portege series like Portege M400 or Portege M7xx series supports an Ultra Slim Bay HDD adaptor in order to insert an second HDD in place of the CD/DVD drive but A600 does not support this

Second HDD for a Probook 6570b

I want to know if I can replace the DVD unit with a HDD, and if possible please provide that PN for the tray to install the second HDD. I am planning to have the OS on a SSD and the data files on a standard HDD.
Thanks

Hi,
Yes. The following videos may help you for a starting point:
http://www.youtube.com/watch?v=H2XJ7f28dZU
   http://www.youtube.com/watch?v=l-nZ09xalIE
and the folloing caddy will work:
   http://www.newmodeus.com/shop/index.php?main_page=product_info&products_id=413
Regards.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Installed, Win 7 Won't Boot from Second HDD

Hi ya'll,
I've successfully installed Win7 64 Pro on a second internal HD on my fall '12 MBP (X.8.3), located in the optical bay. After having re-attached the first drive, Win7 shows up in the boot selection menu, but when selected, does not boot (error: "please insert boot disk and press any key").
My install process was as follows:
Format second drive into two partitions [OS Extended, FAT32] using disk utility, making sure that the second partition is provided a master boot record.
Disconnect primary drive (SSD), so that the second hdd is recognized as bootable from the Win7 installer.
Boot from prepared bootcamp thumbdrive using a fresh ISO.
Use windows installer to format FAT32 partition as NTFS.
Install windows
Install drivers
Update Win 7 and bootcamp drivers
Power off
Recconnect primary drive (SSD)
Power on
Win 7 shows in boot menu. Instead of working, dead-ends at "no bootable device".
Can still boot from SSD or thumbdrive, but not Win7 partition
Arggggh!
Is there a setting related to the HD controller that needs to be tweaked to make this work? Is there a known issue with the controller firmware? Any help would be greatly appreciated!
- Neb

*Take an iMac and Windows 7 Blue screen fun*
the final part of the Win 7 install and Mr Blue screen due to the Nividia driver supplied on Win 7 DVD kills iMac GT7300
1. Install... and Blue screen!
2.Re-boot but from the Win 7 install disk – seems to work if you hold alt on boot up and select the disk to boot from!
3.When you get into the Windows installer, click past the language selection. Then click "Repair your computer".
4.Windows will scan for installations and prompt you with a list. Select your "C" drive and click Next.
5.You should be presented with a windows titled *System Recovery Options*.
At the bottom of this list you should see +Command Prompt+.
Select the command prompt.
6.When the console opens, you can delete the offending driver using the following command:
DEL C:\WINDOWS\SYSTEM32\DRIVERS\NVLDDMKM.SYS
7.Close the command prompt window and click the Restart button.
This time, boot from your hard disk.
You will complete the install with no Blue screen.
Having done this go to the Nivida web site and download the GT 7 series drivers for Windows 7.
Install, re-boot and ...
+*... install Bootcamp drivers and right off your back to Blue Screen...*+
Repeat 1-7 and install newly downloaded drivers and off you go
http://geekswithblogs.net/ajames/archive/2009/08/12/take-an-imac-and-windows-7-r tm-ndash-and-have.aspx

Mac mini: OS can not "see" second HDD.

Hello:
Through a series of unfortunate events I messed up the partition table of my Mac mini server. The OS can not "see" one of the 02 HDDs included in this mini server. Even trying to install the OS from the original DVD fails to see the second HDD, which used to have the boot partition and most of my data.
I boot up using the DVD into Disk Utilities, then I use the Terminal utility:
diskutil list
/dev/disk0 => 500 GB
/dev/disk1 => 500 GB
Please see screenshots here:
http://www.nihpo.com/static/images/01.jpg
http://www.nihpo.com/static/images/02.jpg
But here seems to be the problem:
/dev/disk2 => 1.3 GB
And partition "2" in this disk has the label "Apple_HFS Mac OS X Base System"
Shouldn't partition disk0s2 have the label "Apple_HFS Mac OS X Base System" instead?
Running OS X 10.8
Any suggestions on how to get the OS to "see" and boot from partition disk0s2 will be appreciated. Thanks.

And partition "2" in this disk has the label "Apple_HFS Mac OS X Base System"
Shouldn't partition disk0s2 have the label "Apple_HFS Mac OS X Base System" instead?
I'm not on 10.8 to be certain right now, but I don't think so...
diskutil list
/dev/disk0
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *596.2 Gi   disk0
   1:        Apple_partition_map                         31.5 Ki    disk0s1
   2:                 Apple_Boot Boot OSX                128.0 Mi   disk0s2
   3:                 Apple_RAID                         596.0 Gi   disk0s3
/dev/disk1
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *596.2 Gi   disk1
   1:        Apple_partition_map                         31.5 Ki    disk1s1
   2:                 Apple_Boot Boot OSX                128.0 Mi   disk1s2
   3:                 Apple_RAID                         596.0 Gi   disk1s3
/dev/disk2
   #:                       TYPE NAME                    SIZE       IDENTIFIER
   0:     Apple_partition_scheme                        *1.8 Ti     disk2
   1:        Apple_partition_map                         31.5 Ki    disk2s1
   2:             Apple_Driver43                         28.0 Ki    disk2s2
   3:             Apple_Driver43                         28.0 Ki    disk2s3
   4:           Apple_Driver_ATA                         28.0 Ki    disk2s4
   5:           Apple_Driver_ATA                         28.0 Ki    disk2s5
   6:             Apple_FWDriver                         256.0 Ki   disk2s6
   7:         Apple_Driver_IOKit                         256.0 Ki   disk2s7
   8:              Apple_Patches                         256.0 Ki   disk2s8
   9:                  Apple_HFS Mac OS X Install DVD    16.0 Gi    disk2s10
10:                  Apple_HFS Tiger                   825.0 Gi   disk2s12
11:                  Apple_HFS Leopard                 1021.6 Gi disk2s14
Have you tried Repairing that drive with Disk Utility?

R61 Second HDD Bay DMA mode

Hello,
I'm using R61 to which I've replaced the DVD drive with an UltraBay adapter and a Western Digital 320GB HDD to expand my data storage. Everything is OK but the second HDD runs in Multi-Word DMA mode 2.
I've done with both the latest Intel Chipset patch and Lenovo Max Storage patch on Windows Vista 32-bit. After those patches some SATA device drivers have changed to new ones, but ATA channel 0 controller runs still in Multi-Word DMA mode 2, which is a setting for ODD.
I know that the controller for the UltraBay is PATA controller, so the SATA HDD in my UltraBay is converted to PATA mode by converting chip in the UltraBay adapter. But what I'm curious about is why it doesn't run in ATA DMA mode 4 or 5 set for HDD.
After replacing ODD with a HDD in UltraBay, the ATA driver doesn't change the DMA mode from Multi-Word DMA mode 2 to ATA mode 4 or 5.
Anybody has the same problem or a solution to this?

I know this is an old thread, but did you ever find the solution for this? I have the same problem with my T61. I can't get my WD Black SATA drive to transfer at anything above Multi-Word DMA 2 (16MB/sec). It's incredibly annoying, and I can't seem to find much online about it.

Second HDD in Satellite X200-21K (PSPBUE)

I'm looking for some informations about installing second HDD into my laptop.
Laptop does have an "empty/spare" bay for second HDD, but there are no disk connectors in bay. So there is no easy way for upgrading.
So I've looked over the net, and as far as i know i have two options:
1) Buy appropriate hdd connectors and 2.5" HDD. Take appart my laptop, connect cables onto motherboard and install second HDD in empty bay.
Q1) Does X200-21K motherboard have second (spare) SATA connector? I assume that motherboard have only two SATA connectors (one for HDD, and one for DVD).
Q2) Is possible to connect two hard drrives onto one SATA motherboard connector?
2) Replace DVD with HDD
Q1) Is this possible? Did someone alreary replaced DVD with HDD?
I've seen on internet that this is possible on MacBook, and on some other laptops/notebook (HP,...)
Thanks for answers
PL

hi petrusko_1,
i cant believer that there is space for a second hdd without connector...are you sure?
can you upload a picture?
- to your first question: do you have the whole number at hands (starting with PSPBUE-)?
this number indicates what hardware/software is inside (ram, hdd, grafics etc)
- second one with the sata issue: one connector = one drive
if you are shure that there is only one connector in your machine you wont be able to connect 2 drives to this single connector.
soldering another connector to the mainboard is dangerous and its doubtful that it will work afterwards....
your idea with using the second connector of the odd (optical disk drive) isnt bad...
maybe it is a baymodule available where you can put in the sec. hdd and install it to the odd bay....
btw: the sata controller doesnt care if there is a hdd or odd attached....

Boot from second hdd?

Hello!
My laptop: t420s.
This laptop has an extra slim 320 gb HDD as factory default.
My question: if I buy a second HDD drive caddy, and install a second hdd (SSD) the laptop can boot from the drive tah can be found in the caddy?
Thanks!

Technically yes, but not recommended. The primary bay is where is should be. You can move your existing HD into the caddy for additional storage if you want.
Normally the caddy is not always powered and if it ever is shut down the system will crash. Keeping it powered and online is not documented nor 100% guaranteed.
Imaging the HD for the SSD using another drive or cloning from the HD to the SSD are the most straight forward methods.
Acronis Trueimage is one of the better tools, while other exist. I would NOT wipe the original drive for some time afterwards in case something goes wrong or fails. That drive is a full backup.
Also before even starting I would make the recovery DVD's if you haven't yet. SSD do fail and when they do there is little warning.
T520 Model 4239 Intel(R) Core(TM) i7-2860QM CPU @ 2.50GHz
Intel Sandy Bridge & Nvidia NVS 4200M graphics Intel N 6300 Wi-Fi adapter
Windows 7 Home Prem - 64bit w/8GB DDR3

Second HDD/SSD Bay

Does anyone know if HP offers an Optional Second HDD/SSD bay for the Elitebook 2560P? I would like to replace the DVD with a second hard drive.

rotoruda wrote:
Does anyone know if HP offers an Optional Second HDD/SSD bay for the Elitebook 2560P? I would like to replace the DVD with a second hard drive.
Hi,
There are plenty of them on ebay..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Second HDD sleep... possible?

Hi!!
I have a Macbook pro with 1 SSD and 1 HDD (replaced in DVD slot). The HDD I use for music, movies... is there a way to sleep the HDD when I'm not using it, so I can save some battery?
thanks!

If you dontt have such a connector, you cant install a second HDD. Furthermore you cant buy such a SATA connector because they are fixed/soldered on mainboard.
So your only option is exchanging the HDD with another model. As I wrote you can take a 500GB model. It must be a 2.5 HDD with SATA interface.
I can recommend a Western Digital Caviar Blue series. Thats a good compromise between performance and noise.
But of course, Toshiba HDDs will work too. ;)

Toshiba Satellite P875-S7310 second HDD question

I just purchased a Toshiba Satellite P875-S7310 (http://us.toshiba.com/computers/laptops/satellite/P870/P875-S7310/) and was hoping to install a second hard drive (SSD) to improve load times and boot times. As I understand it is rather wasy to install a second SSD into the P875-S7102, as it has a second hard drive bay, but I'm unsure about the P875-S7310. Technical support hasn't been of much help to me so I figured the second place to ask would be here. Does the Toshiba Satellite P875-S7310 also have a second HDD bay or will I need to do something like remove the DVD drive and buy a HDD caddy to install a SSD into this laptop?
Thanks a ton if you can provide me with any information,
Nianni150

The problem with those spec sheets is that they don't list the P875-S7102 as having a second hard drive buy, but in in fact does. It also seems to be compatible with whatever the bios firmware is and allows a SSD to be run seperately.
For reference here is the second hard drive bay for the P875-S7102 that was confirmed on this forum to function. I've attached a picture of the back of the P875-S7102 I've ordered which seems to have the same configuration. I guess my question is if anyone knows whether or not the BIOS supports a secondary hard drive and if there is a SATA connection. I was hoping to buy the SSD now and have it arrive at the same time as the laptop. but I'm hesitant to do that since I'm unsure whether it will work or not.
Attachments:
p875-s7310.jpg ‏105 KB

Probook 4740s motherboard

Hi!
My laptop has a problem with the motherboard. Whenever I press the power button, only ventilation works. Nothing appears on the screen. just restart it every 5 seconds.
how can I solve this?
Best Regards
Guxim Neziri.

Hi pwlj ,
Thxs for your reply.
This is funny cause every word they`ve told you is similar to what "HP Help and support" application says in it`s "Before updating to Windows 8.1" article, except of rolling back to previous operating system. I recently purchased a brand new desktop for my family - HP EnvyPhoenix 810-001 er - and "HP help and support" app told me the same thing about updating to Windows 8.1. HP ProBook 4740s is not the lates one, but HP EnvyPhoenix 810 is the latest. Why do they not care about their latest products???
It seems like HP doesn`t care about desktops and laptops anymore and is switching their priority to tablets. This could be reasonable cause of rapidly growing tablet pc`s market. But it is unfair to other HP customers.
I`ve been with HP scince their first appearence on Russian PC market when first pieces of their equipment were simply imported from UK, France, Germany etc. My HP Compaq nx 7300 still works and I `ve updated it to Windows 8 recently.
I would have never ever thought that HP would have such problems with low-quality techsupport or anything else in their company.
I`ll try to reach our Russian Call center of HP TechSupport as "HP Help and Support" app is providing it`s number, but I think the answer would be the same.
Meanwhile lets get in toucn via this forum on any updates that might help us to resolve our issue.
Thxs in advance,
MaxFremen

Caps lock flashing (hp probook 4740s)

Hello i'm new here with an annoying problem
couple of months ago i had an issue with bios (product informantion not valid) this issue appeared after i tried to install windows 7 but failed but after 100000 attempts i finally got windows 7 on my laptop and yea everything was fine until some weeks everytime i press on the power button my screen stays black and my caps lock LED flashes and after some seconds my fan goes on max. rotation i dont know what to do.. but this might be a BIOS authentication failure
i am not sure.. i hope someone can help me out i would really appreciate it
and this is an video:
http://www.youtube.com/watch?v=Gf0t15ky6LI
please help me guys
thanks in advance.

I am sorry, but to get your issue more exposure, I would suggest posting it in the commercial forums, since this is a commercial product. You can click here for the link.
HP ProBook 4740s Notebook PC Support
TwoPointOh
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

T410 Slow to boot when second HDD is in Ultrabay

Hi
I have a T410 with 80 GB SSD in the main drive for my OS.
I also have a second harddrive WD 750GB Scorpio Blue in the Ultrabay for data.
I am using the genuine ultrabay adapter (ThinkPad Serial ATA Hard Drive Bay Adapter Part 43N3412).
When I swap in DVD in the ultray bay, boot time is very fast.
When I have second HDD in the ultra bay, boot time is exceedingly slow, with the windows symbol pulsing for several minutes before allowing me to log on.
Is there a setting I should make in BIOS to ignore the second HDD on startup?
TIA
adbell

Was using the T410 with the factory installed HDD in the ultrabay but works fine.
Hmmm ... When in BIOS, is the BIOS reporting the 2nd HDD correctly?
Got antivirus installed? I'm just taking a stab in the dark here however is it possible that the antivirus is scanning the 2nd drive when its booting into Windows?
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

Satellite A300-15M - Can I install a second HDD?

Hi there.
I own a SatelliteA300-15M. I bought the laptop 2 years ago. I have already 250GB hard drive which came with the laptop. Recently I got my laptop serviced from local shop. I noticed that it has an additional slot for another hard drive. I saw a post that some of the A300/A305 laptops have the space for second hard drive but not the connectors.
If anyone owns A300-15M can they please tell me if i can install a second internal hard drive in my model? Is there a sure way to find if I can really install a second hard drive?

Hello
> but not the connectors.
So the case is claer: If you dont have a second SATA connector, you cant install a second HDD.
Check also the forum regarding such questions. The point is that one notebook series (e. g. Satellite A300) is always equipped with the same case but the hardware is different. So not all models have the same features. ;)

Second HDD instead DVD HP ProBook 4740s

Similar Messages

Maybe you are looking for