Second Interview Tips!

Hi all,
I was actually interviewed by a Java company (position is Software Engineer Mobility - Java and Oracle) during our university career fair programme. That went around 30 minutes. And they showed the interest in my strength. Then I was called for a technical interview and after that the interviewer declared that I've successfully passed the techical interview and to wait for the reply from the HR.
So just yesterday I was called again for another interview, when I asked them, they said it's discussion based.
Hence, I've done all the research and back ground reading I can do to make my standing strong there next week. I've properly review my first two interview questions as well.
But I just need some tips and ideas to prepare for this discussion based interview. By the way, the company is from East Asian Region, more to Chinees touch. I'm from Indian continent, non chineese.
Thank you. I really do want this job and wana do my level best to get the job.

Hi,
I don't know that those tyes of interviews are like over there. I live in Sweden and I have held lots of interviews and the interview that you are describing is usually an interview where they want to find out what type of person you are and if they want to work with you. It's usually not a technical interview.
Kaj

Similar Messages

Labview interview tips

For those of you who have gone on or given an interview for a labview programming position, what kind of questions can someone expect? Any suggestions for tips would greatly be appreciated.
Thanks,
Brian
CLAD
Brian

One of the better companies I worked for had a written test as part of my interview. Mostly associate developer-level stuff.
Another company simply asked "do you know LabVIEW"? I said "yes". That was it.
Both companies made offers.
PaulG.
"I enjoy talking to you. Your mind appeals to me. It resembles my own mind except that you happen to be insane." -- George Orwell

Interview Tips & Guidelines

Hi Experts,
If anybody have interview questions in Portals kindly send it to [email protected]
For every reply will be appreciated with higher points
Thanks in Advance,
Jasmine

Here are the few FAQ's in EP.
1.What is SAP Enterprise Portal?
2.What components does SAP Enterprise Portal contain?
3.What is the relationship between Web Dynpro and SAP Enterprise Portal? Are iViews and Web Dynpro competing technologies?
4.What personalization functions does SAP Enterprise Portal provide?
5.What tools does SAP provide for creating portal content?
6.What are the key features of the portal?
7.Which security features does SAP Enterprise Portal offer?
8.How is user management implemented in SAP Enterprise Portal?
9.How can I integrate the user management of the portal with that of other systems?
10.Where can I find more information about user management and security in the portal?
Rgds,
Jothi.

Oracle Financials Functional Situational Interview Questions

Hello Oracle Fin Brothers,
For Oracle Financial Functional Consultant
I am new in Oracle Financials, Just completed my training and I am having my first interview Thursday; the recruiter tell me the first step will be Situational Interview and I really don't understand what this mean; can some one tell me exactly how is an Situational Interview in Oracle Financial Functional? what are the possible questions and answers? did some one have a list of situational interview questions and answer to help me with? I will really appreciated.
The second step will be Skill interview; what is the difference with situational interview? what are the possible questions and answers? can some one provide a list of possible questions and answers? for Oracle Functional consultant?
Hope to get some helpful post
Thanks
Ferrari

Hi,
I can tell you about my experience in different process.
I usually have a first interview with the recruiter/agency this first interview is quite general, he usually review your CV, job history,... the recruiter ask you about your interest or motivation for that process, if you are willing to travel, reallocate, etc.. your salary expectations and your knowledge in the different modules. This is the easier interview and if everything is ok, the recruiter will tell you for next steps, probably about the project, the employer, etc...
In the second interview normally is with the consultancy company, with the manager and an experience consultant that usually asks about technical questions, they ask for example, how to setup a dual accounting process with SLA in GL, which reports you would use to reconcille AP/AR and GL, how many segments do you need to setup in GL for a specific business situation, how to load assest in FA, which are de accounting steps from buy goods until you account the AP invoices,...
In some cases you have also a final interview with customer just to get the final approval, but the really important one is the second interview.
Good Luck ;-)
xhuertax

How to speed up tool tips ( hints ) ??

hi folks
does any one know how to speed up tool tips in mac ??
if u go to any tool in any application in mac and hold your mouse on it for a second , a tip will be showen telling you something on this tool
in mac i have to wait 2 - 3 second so i can see the tips
why ??
hope to find answer

I believe the default time for Cocoa apps is 2 seconds in Leopard. You can speed this up with a Terminal command. Launch Terminal, then copy and paste this command and press the Return key:
defaults write -g NSInitialToolTipDelay -int 100
That final number is milliseconds, so that should be rather speedy. It will also speed up the display of the location when you mouse over your Spotlight results. You may have to restart to see the change. Don't know what, if anything, you can do for Carbon apps.
Francine
Francine
Schwieder

Functional Consultant Interview Questions

Hi,
Can anyone please send me some interview questions nad materials related.
Does anyone have questions that will cover a Functional Consultant Role.
Thanks a lot,
Murali
<removed>

Hi,
I can tell you about my experience in different process.
I usually have a first interview with the recruiter/agency this first interview is quite general, he usually review your CV, job history,... the recruiter ask you about your interest or motivation for that process, if you are willing to travel, reallocate, etc.. your salary expectations and your knowledge in the different modules. This is the easier interview and if everything is ok, the recruiter will tell you for next steps, probably about the project, the employer, etc...
In the second interview normally is with the consultancy company, with the manager and an experience consultant that usually asks about technical questions, they ask for example, how to setup a dual accounting process with SLA in GL, which reports you would use to reconcille AP/AR and GL, how many segments do you need to setup in GL for a specific business situation, how to load assest in FA, which are de accounting steps from buy goods until you account the AP invoices,...
In some cases you have also a final interview with customer just to get the final approval, but the really important one is the second interview.
Good Luck ;-)
xhuertax

Voice Memo on iphone 5 has started to cut out at the 25.40 mark.

I have been using the voice memo function on the iphone without any issues with it recording to any length desired.
I use it to record interviews and podcasts. However, last night, without warning, it has decided to just stop recording at the 25.40 mark. At first I thought it was something that I did but then during a second interview, it cut out at exactly the same time again.
I have recently updated to IOS7 but have used the voice memo since without problems so I doubt its the update that has caused this.
Anyone know of any fixes?
Thanks
A

I have a 5c, and here is how I was able to trim a test recording:
1. Open the recording file in Voice Memos.
2. Tap "Edit" at the bottom. It's between the arrow-up symbol and trash can.
3. On the right side, near the bottom-right corner you'll see a blue box with a round blue dot at the top-left corner of it, and another one at the bottom-right. This is the Trim button. Tap it.
4. You should now see the recording with the "wavelengths", a vertical blue line (with a blue dot at top and bottom), and on each side a red line (also with red dot at top/bottom).
5. Touch the left red line and you'll notice you can touch/drag it to the beginning point of your desired portion of the recording.
6. Touch the right red line and touch/drag it for the recording's end point.
7. Hit the Play button to play just the trimmed portion, making sure it's what you want.
8. Once it's what you want, touch "Trim". Up pops "Trim Original" or "Save as New Recording".
On emailing it, go to the trimmed copy and click the arrow-up symbol, which will allow you to either message or email it.
EDIT: I found you can name your recording file to what you want by tapping the default name of it. A cursor will appear where then you can delete and retype a custom file name. Great for emailing so you recipients will know what it is by looking at it.
Message was edited by: Marble Rye

Why the same function ToolTipText behaves differently in Jar and in Class

Hi All! In my applet I use two similar statements from javax.swing:
jListTeaSortSelect.setToolTipText("To stop the alarm just click over here.");
jProgressBar1.setToolTipText("To stop the alarm just click over here.");
Both work correctly when I run my applet from classes.
Problem: When I run it from jar, composed from the same classes, second tool tip does not appear.
I have no idea on where to get a hint to the solution. Could that be that the problem is caused by other graphical components or by the layout of the container?
The applet and JAR in question with source code can be found on
http://www.kobylkin.net/TeaTimer.htm , and the source code is included below in this letter as well..
Thanks!
Egor
I do not include GNU GPL here, for histerical reasons [:-)]
* TeaTimerJApplet.java
* Created on 19. Januar 2002, 18:56
* Tea timer with sound alarm to brew your tea right for the best taste.
* Copyright Kobylkin Egor 2002. [email protected] www.kobylkin.net
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version 2
* of the License, or (at your option) any later version.
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307,
USA.
import java.awt.*;
import java.awt.event.*;
import javax.swing.*;
import java.applet.*;
import java.applet.Applet;
import java.net.*;
public class TeaTimerJApplet extends javax.swing.JApplet {
/** Creates new form TeaTimerJApplet */
public TeaTimerJApplet() {
initComponents();
/** This method is called from within the constructor to
* initialize the form.
* WARNING: Do NOT modify this code. The content of this method is
* always regenerated by the Form Editor.
private void initComponents() {//GEN-BEGIN:initComponents
java.awt.GridBagConstraints gridBagConstraints;
jListTeaSortSelect = new javax.swing.JList();
jButtonTimerStart = new javax.swing.JButton();
jProgressBar1 = new javax.swing.JProgressBar();
getContentPane().setLayout(new java.awt.GridBagLayout());
jListTeaSortSelect.setBorder(new
javax.swing.border.TitledBorder("Select the tea type"));
jListTeaSortSelect.setModel(new javax.swing.AbstractListModel() {
String[] strings = { "Test................10sec.", "Green
tea.........3min.", "Black tea...........4min.", "Black
tea...........5min.", "Mint, Coffee......8min." };
public int getSize() { return strings.length; }
public Object getElementAt(int i) { return strings; }
jListTeaSortSelect.setToolTipText("To stop the alarm just click
over here.");
jListTeaSortSelect.setName("jListTeaSort");
jListTeaSortSelect.setSelectedIndex(2);
jListTeaSortSelect.setSelectionBackground(java.awt.Color.yellow);
jListTeaSortSelect.setSelectionMode(javax.swing.ListSelectionModel.SINGLE_SELECTION);
jListTeaSortSelect.setAutoscrolls(false);
jListTeaSortSelect.addMouseListener(new
java.awt.event.MouseAdapter() {
public void mousePressed(java.awt.event.MouseEvent evt) {
jListTeaSortSelectMousePressed(evt);
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 0;
gridBagConstraints.gridy = 0;
gridBagConstraints.fill = java.awt.GridBagConstraints.HORIZONTAL;
getContentPane().add(jListTeaSortSelect, gridBagConstraints);
jButtonTimerStart.setBackground(java.awt.Color.lightGray);
jButtonTimerStart.setText("Start the timer");
jButtonTimerStart.setToolTipText("<html>Visit me at
www.kobylkin.net <br> Copyright Kobylkin Egor 2002 under GNU GPL</html>");
jButtonTimerStart.setDoubleBuffered(true);
jButtonTimerStart.setMaximumSize(new java.awt.Dimension(180, 90));
jButtonTimerStart.setMinimumSize(new java.awt.Dimension(120, 27));
jButtonTimerStart.setNextFocusableComponent(jListTeaSortSelect);
jButtonTimerStart.setPreferredSize(new java.awt.Dimension(140,
27));
jButtonTimerStart.addActionListener(new
java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
jButtonTimerStartActionPerformed(evt);
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 0;
gridBagConstraints.gridy = 1;
getContentPane().add(jButtonTimerStart, gridBagConstraints);
jProgressBar1.setToolTipText("To stop the alarm signal just click
over here.");
jProgressBar1.setMinimumSize(new java.awt.Dimension(140, 14));
jProgressBar1.setPreferredSize(new java.awt.Dimension(140, 14));
jProgressBar1.addMouseListener(new java.awt.event.MouseAdapter() {
public void mousePressed(java.awt.event.MouseEvent evt) {
jProgressBar1MousePressed(evt);
gridBagConstraints = new java.awt.GridBagConstraints();
gridBagConstraints.gridx = 0;
gridBagConstraints.gridy = 2;
getContentPane().add(jProgressBar1, gridBagConstraints);
}//GEN-END:initComponents
private void jListTeaSortSelectMousePressed(java.awt.event.MouseEvent
evt) {//GEN-FIRST:event_jListTeaSortSelectMousePressed
// Add your handling code here:
if ( timerIsRunningFlag == false )
jListTeaSortSelect.setBackground(java.awt.Color.white);
so.stop();
}//GEN-LAST:event_jListTeaSortSelectMousePressed
private void jProgressBar1MousePressed(java.awt.event.MouseEvent evt)
if ( timerIsRunningFlag == false )
jListTeaSortSelect.setBackground(java.awt.Color.white);
so.stop();
private void
jButtonTimerStartActionPerformed(java.awt.event.ActionEvent evt)
{//GEN-FIRST:event_jButtonTimerStartActionPerformed
//set the controls in dumb state:
jButtonTimerStart.setEnabled(false);
jListTeaSortSelect.setEnabled(false);
jListTeaSortSelect.setBackground(java.awt.Color.white);
switch ( jListTeaSortSelect.getSelectedIndex() ) {
case 0 : timerDelay = 500; break; //Test 10 sec.
case 1 : timerDelay = 9000; break; //Green tea 3 min.
case 2 : timerDelay = 12000; break; //Black tea 4 min.
case 3 : timerDelay = 15000; break; //Black tea 5 min.
case 4 : timerDelay = 24000; break; //Mint tea 8 min.
// every "timerDelay/100" seconds the progress bar status will be
set to be -5% less by timerTaskPerformer.
// After 20 times timerDelay will be less than 5% so the
timerTaskPerformer fires the alarm.
timer = new javax.swing.Timer(timerDelay, timerTaskPerformer);
timer.setRepeats(true);
timer.start();
timerIsRunningFlag = true;
progressBarStatus = 100;
jProgressBar1.setValue( progressBarStatus );
jButtonTimerStart.setLabel("Timer started");
so.stop();
}//GEN-LAST:event_jButtonTimerStartActionPerformed
private ActionListener timerTaskPerformer = new ActionListener() {
public void actionPerformed(ActionEvent evt) {
if (progressBarStatus > 5){ progressBarStatus-=5;
jProgressBar1.setValue(progressBarStatus);
}else{
timer.stop();
timerIsRunningFlag = false;
//user alarm actions
jListTeaSortSelect.setBackground (java.awt.Color.red);
Toolkit.getDefaultToolkit().beep();
so=getAudioClip(getCodeBase(), "spacemusic.au");
so.loop();
/* "Server not found" IE error.
open pop-up explorer window to alert user
try {
AppletContext ac = getAppletContext();
ac.showDocument( new URL( getCodeBase() +
"teaReady.html" ), "_self");
catch (MalformedURLException exc) {
showStatus("Cannot find file teaReady.html");
progressBarStatus = 0;
jProgressBar1.setValue( progressBarStatus );
//return to the initial state
jButtonTimerStart.setText("Start the tea timer");
jButtonTimerStart.setEnabled(true);
jListTeaSortSelect.setEnabled(true);
//Variables declaration
private int progressBarStatus = 100;
public boolean timerIsRunningFlag = false;
public int timerDelay;
private javax.swing.Timer timer;
public AudioClip so;
// Variables declaration - do not modify//GEN-BEGIN:variables
private javax.swing.JButton jButtonTimerStart;
private javax.swing.JList jListTeaSortSelect;
private javax.swing.JProgressBar jProgressBar1;
// End of variables declaration//GEN-END:variables

Hi
What i understand from u'r problem is that when a jar is created and run under browser, ToolTipText for progress panel is not shown? is so is the case - i had no problems..
The code given was compiled and created a jar successfully..
this is how i created the jar..(under WindowsNT and MSIE)
jar cf TeaTimer.jar TeaTimerJApplet.class
TeaTimer.html
<!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN">
<HTML>
<HEAD>
<TITLE> New Document </TITLE>
<META NAME="Generator" CONTENT="EditPlus">
<META NAME="Author" CONTENT="">
<META NAME="Keywords" CONTENT="">
<META NAME="Description" CONTENT="">
</HEAD>
<BODY BGCOLOR="#FFFFFF">
<APPLET CODE="TeaTimerJApplet" archive="TeaTimer.jar" WIDTH="200" HEIGHT="200">
</APPLET>
</BODY>
</HTML>
cheers
Mohan

Where to see Terminated Applicants against a vacancy ??

Dear Friends,
We are using Oracle iRecruitmnet for recruiting. Lots of candidates apply for one vacancy. And HR puts candidates in different statuses like fist interview, second interview, offer and so on.
Also HR termibnates applicats against a certain vacancy.
No I want to see a report where I can see all the terminated applicants against a vacancy.
I have tried it in Core HR (Recruitment Administrator) but I could not find one.
Please let me know, if by any way I can see terminated applicants against a vacancy anywhere in the application.
Thanks in advance,
Sabyasachi

Thanks a lot Thierry.
I was wondering whether it is possible by people folder. Like List Peole by Assignment (View -> Lists ). I have tried out though, but no success.
To my surprise in the list of values for Status 'Terminate Assignment' is there. When I select that, and click on FInd, no data is retrieved.
Is this a functinality provided by oracle to see terminated applicants ? Or I am doing any mistake.
Please have a look into this.
Regards,
Sabya

SQL tuning suggestions.

Hi
I am not a sql programmer and developers have given me this sql to have a look. I made the following recommendations after going through the sql. Is there anything else that can be added . I did not add about stats because they are representative and up to date.
SELECT /*+ PARALLEL(q1,4) */ *
FROM
(SELECT /*+ FIRST_ROWS(20) */
br.resource_id,
br.resource_code,
x.resource_seq_num employee_resource_number,
br.organization_id,
bd.department_id,
bd.department_code,
pf.full_name employee_name,
(SELECT xxdl_eam_util_pkg.xxdl_eam_get_resource_code(pf.person_id, bd.department_id)
FROM dual)
maximum_cost_resource,
pf.person_id,
x.wip_entity_id wo_id,
(SELECT weo1.wip_entity_name
FROM wip_eam_work_orders_v weo1
WHERE weo1.wip_entity_id = x.wip_entity_id)
wo_number,
CAST(x.start_date AS
TIMESTAMP) start_date,
CAST(x.completion_date AS
TIMESTAMP) completion_date,
wor.operation_seq_num wo_operation_number,
wor.resource_seq_num wo_resource_number,
wor.usage_rate_or_amount HOURS,
BRE.effective_start_date instance_start_date,
BRE.effective_end_date instance_end_date,
BRE.instance_id,
crc.resource_rate AS
resource_cost,
(SELECT xxdl_eam_util_pkg.xxdl_eam_get_all_res_code(pf.person_id, bd.department_id)
FROM dual)
all_resources
FROM per_all_people_f pf,
wip_eam_work_orders_v weo,
wip_operations wo,
wip_operation_resources wor,
(SELECT instance_id,
wip_entity_id,
operation_seq_num,
resource_seq_num,
start_date,
completion_date
FROM wip_op_resource_instances_v) x,
bom_dept_res_instances bdri,
bom_resource_employees BRE,
bom_department_resources bdr,
bom_resources br,
cst_resource_costs crc,
bom_departments bd
WHERE br.organization_id = bd.organization_id
AND bdr.resource_id = br.resource_id
AND bdr.department_id = bd.department_id
AND BRE.resource_id = br.resource_id
AND pf.effective_start_date <=sysdate
AND pf.effective_end_date >= sysdate
AND pf.person_id = BRE.person_id
AND wo.department_id = bd.department_id
AND wor.operation_seq_num(+) = wo.operation_seq_num
AND wor.wip_entity_id(+) = wo.wip_entity_id
AND wor.organization_id(+) = wo.organization_id
AND weo.wip_entity_id = wo.wip_entity_id
AND weo.organization_id = wo.organization_id
-- AND weo.organization_id = 6921
AND DECODE(bd.disable_date,null, sysdate,bd.disable_date) >= sysdate
AND DECODE(br.disable_date,null, sysdate,br.disable_date) >= sysdate
AND DECODE(wo.disable_date,null, sysdate,wo.disable_date) >= sysdate
AND crc.resource_id(+) = BRE.resource_id
AND x.wip_entity_id = wor.wip_entity_id
AND x.operation_seq_num = wor.operation_seq_num
AND x.resource_seq_num = wor.resource_seq_num
AND x.instance_id(+) = BRE.instance_id
AND bdri.department_id = bd.department_id
AND bdri.resource_id = br.resource_id
AND weo.organization_id = 6921
AND bdri.department_id = 5004
UNION
SELECT /*+ FIRST_ROWS(20) */ DISTINCT NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
pf.full_name employee_name,
NULL,
pf.person_id,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL,
NULL HOURS,
NULL,
NULL,
NULL,
NULL,
NULL
FROM per_all_people_f pf,
wip_eam_work_orders_v weo,
wip_operations wo,
wip_operation_resources wor,
bom_dept_res_instances bdri,
bom_resource_employees BRE,
bom_department_resources bdr,
bom_resources br,
cst_resource_costs crc,
bom_departments bd
WHERE br.organization_id = bd.organization_id
AND bdr.resource_id = br.resource_id
AND bdr.department_id = bd.department_id
AND BRE.resource_id = br.resource_id
AND pf.effective_start_date <=sysdate
AND pf.effective_end_date >= sysdate
AND pf.person_id = BRE.person_id
AND wo.department_id = bd.department_id
AND wor.operation_seq_num(+) = wo.operation_seq_num
AND wor.wip_entity_id(+) = wo.wip_entity_id
AND wor.organization_id(+) = wo.organization_id
AND weo.wip_entity_id = wo.wip_entity_id
AND weo.organization_id = wo.organization_id
AND DECODE(bd.disable_date,null, sysdate,bd.disable_date) >= sysdate
AND DECODE(br.disable_date,null, sysdate,br.disable_date) >= sysdate
AND DECODE(wo.disable_date,null, sysdate,wo.disable_date) >= sysdate
AND crc.resource_id(+) = BRE.resource_id
AND bdri.department_id = bd.department_id
AND bdri.resource_id = br.resource_id
AND weo.organization_id = 6921
AND bdri.department_id = 5004
AND NOT EXISTS
(SELECT instance_id,
wip_entity_id operation_seq_num,
resource_seq_num
FROM wip_op_resource_instances_v)
) q1
ORDER BY department_id,
resource_code,
employee_name,
wo_number
My suggestions:
. Try to use UNION ALL instead of UNION. If you can eliminate UNION all together and flatten the query that will be even better.
2. You are using the function in a select statement xxdl_eam_util_pkg.xxdl_eam_get_resource_code(pf.person_id, bd.department_id)This will slow the performance. Try to get rid of this. Function calls in select are expensive.
3. Dont use the parallel hint and optimize. It wont get you consistent results.
4. Use of per_all_people_F is expensive. The UNION again complicates things. per_all_people_f has to be scanned 2x times.
5. Where does the application get the values for department id? Whether user inputs a value or whether it is hard coded . Most likely user will input value and each time it may be different. If that is the case, then you may be hitting bind peeking. There is not much hope for this. Not much can be done. Whatever you do this can happen. Only way is to pin the plan if you can use literals instead of binds. But that is not possible I think.
6. AND DECODE(bd.disable_date,null, sysdate,bd.disable_date) >= sysdate
AND DECODE(br.disable_date,null, sysdate,br.disable_date) >= sysdate
AND DECODE(wo.disable_date,null, sysdate,wo.disable_date) >= sysdate
Those statements, if you can rewrite would be good. If there are indexes on any of those columns, they are more than likely not used.
7. Are the outer joins really required. If not required remove them.
8. There is a 'WITH' clause in 10g . Try to use that for your subqueries or main query where applicable. It will save some I/O.
9. Try to tune without any hints. Remove the first rows as well and see the difference.
I know that the sql is definately bad and can be rewritten but I am not able to exactly write it for them.
Any inputs or thoughts?
MSK

Hi,
Any suggestions for reading on Sql tuning
I am looking for a practical book with solutions .
And books showing the Sql internal workings ?Take a look on Amazon some Jonathan Lewis books.
I will also recommend you to take a look on the following blogs:
- http://jonathanlewis.wordpress.com/
- http://www.juliandyke.com/
- http://richardfoote.wordpress.com/
- http://tkyte.blogspot.com/
And also any good interview based good Oracle DBA books ?You can take a look on my blog for some common DBA interview questions.
http://oraclenz.com/category/interview-tips/
Regards,
Francisco Munoz Alvarez
www.oraclenz.com

Start With SAP BO,CRM

Hi All,
would like to introduce ERP Scholars as one of the leading institute for quality training in high-end ERP courses. We are happy to invite you for SAP BO & SAP CRM training courses.Kindly refer the link,
http://classifieds.sulekha.com/clad.aspx?cid=5113706
Training Highlights:
Experienced SAP Trainers with experience in Architecting and implementing complex SAP Business Objects and SAP CRM Solutions
Our courses and syllabus are designed by skills in demand in the industry by experienced industry experienced professionals
Individual attention and mentoring.
24x7 Remote Server Access.
Full placement assistance and Interview tips with material you deserve.
High End Lab with wireless access. You can bring your laptop as well.
All required training material provided and access to extensive online knowledge base.
Learn the technology with real time practical exercises; our students have excelled in interviews

Hi Kamalendu
As a starter you can look at Learning Hub discovery edition (it's free) - http://scn.sap.com/docs/DOC-51591
After that, I would recommend you go to the Training and Education SAP website for your country and investigate study options. If you look the the Careers, Training and Certification spaces in SCN you will see your question asked and answered a few times.
Good luck in it all.
Regards
Colleen

Kindly send me some Objects with explanation If u have

Hi all,
I am Santosh .. I am new to this group .. I am in US with H1 .. I am looking for a job in SAP ABAP ..
Kindly any one of you guys send me important interview tips and ansewrs as i am dam new to everything including the place...
And one more thing please send me the Objects with explanation to explain in the interview..
Kindly help me out yaar to get a job ... Plzzzzz
Thanks a lot
Santosh

Hi
for some ABAP technical information check this out,
http://help.sap.com/printdocu/core/Print46c/en/Data/htm/english.htm
then PDF files, AbapProgramimg,
regards,

Apps in AIX?

Hi Gurus,
Could I get some interview tips from Oracle Apps DBA in AIX?
I know EBS in Windows and Linux, What are the differences in the AIX for 11i/R12 installation, check services, check disk space, paching, cloning, copy, config.txt path, other path, net configuration, hostname and domain name configuration, etc?
Thanks and Regards,

Hi,
Could I get some interview tips from Oracle Apps DBA in AIX? I agree with the above. If you are familiar with one Unix flavor you should be able to answer the questions of Oracle Apps database on other platforms.
Thanks,
Hussein

Keep plugins in separate folder

I apologize to many, if not most, of you who probably already practice this tip: install plugins into a dedicated folder.
The only reason I'm posting this rather obvious (at least to me) suggestion is that I've read about several instances of people "uninstalling" plugins or otherwise modifying them on here.
I've had this habit for many years now. It makes it easy to share them, makes upgrades/re-installations smoother and it is very simple to disable them for troubleshooting. If you disable the selection of the dedicated folder, you can compare performance. IF that solves your problem you can tilde them all out and re-enable them one by one to find the specific conflict.

seconded. good tip harold.

Using colours in mail

Hi Forum,
I'm looking at using Colours to flag mail in Mail. firstly, i know i have done it before but i simply cannot find how, when i create a new colour palette, how I changed the colours?!?!? i can create the palette, i can create a new colour name, but i cannot then change or assign a colour to that new colour name. any ideas?
secondly, any tips on how to use Mail to flag differing accounts for different reasons? I have 2 business accounts A, and B, in both I want to flag the mail with its own colour, easy enough, A can be red, B can be blue. i then need to flag different e-mail with each account for different reasons but similar in each account.
For example, in A, i need to flag the email from that accoutn to be blue, then i want to have a smart folder to sort certain types of email, say:
To Do: Urgent
To Do: Not So Urgent
This Months Expenses
Last months Expenses
i can use a flag, but if i use just the colour flag for this account to match the email colour, Blue, only one flag for 4 uses needed. how do differentiate the task above?

nobody knows how to edit the colour pallette in Apple Mail? at all? is it harder than i imagined?

Second Interview Tips!

Similar Messages

Maybe you are looking for