Second line item not getng cancelled..

Hi SAP GURU's,
P.O has 2 line items , Quantity 8 each..
GRN has 2 line items Quantity 8 each..
Line item 1 , has Delivery note Quantity 16 , & is cancelled...
Line item 2 , when we tried cancelling , system stops for short of Quantity..
Any solution for cancelling Second line item..( which has Delivery note zero)
Thanks in Advance..
Adarsh

Hi
"ZZ_AP_CORR_EKES_DABMG"
This correction program works for the scenario where the EKES-MENGE and         *
EKES-DABMG fields are unequeal. (MENGE > DABMG).                     *
The execution of this report will reduce the MENGE field and make it *
equal to DABMG.Goods movement status will not be affected.
You can find a SAP note for this too..
Hope this helps
Regards,
Sasi

Similar Messages

  • Ref. PO no. is not coming in second line item at the time of delivery

    Hi All
    STO Scenario
    In PO it single Line item,  but in delivery we doing split batch. the system showing error that " Enter the    PO No." But in first line it it picking the Ref. Document No. while it not coming second line item.
    Please suggest.
    Regards
    Mahesh

    Hi Mahesh
        Proceed accordingly, first select te batch split by selecting line item and then go to environment for batch select once the batch selected then choose the belowmentioned magnifying glass, maintained other necessary field your delivery will be created.

  • Second line item in Shoppin cart is not displaying the details

    Second line item's district  value is not displayed when the detailed button of second line item is clicked.
    In the shopping cart , there are two line items are added. ( before ordering )
    click on the detail button of first line item, then click on the Ship to address tab . it is displaying the details of the first line item ship to address.
    For getting the value in the district field, BBP_doc_change_badi is implemented .
    The problem is when i click on the detail button of second line itme , the value in the district field is cleard.
    When i click on refresh buttion after that, the value is there.
    I debugged BBP_DOC_CHANGE_Badi~bbp_SC_change method,
    When the second line item is clicked, it populates only the value of first line item . After that if i click on any other buttion, the it_item in the badi populates the second line item value.
    Is this a standard error in SRM or is there any way to display the value of second line item when it is clicked at the first time

    Hi,
    In item category details insure there is tickmark for Schedule line allowed,
    In sales order at item level under shipping tab see storage location ,plant is appearing or not,
    Kapil

  • Not displaying ship to party for second line item

    Hi All,
    When I am creating Sales order, I entered sold to pary,PO number,PO date,material (first line item)and qty.In partner functions for first line item it is displaying ship to party.But whaen I entered second line item & qty,ship to party is not displaying .
    Please guide.
    Thanks,
    GTNR

    Couple of questions !!!!
    a)  Was system allowing you to save
    b)  has the data properly configured in Set Up Partner Determination for Sales Document Item
    c)  is the ship to party different for first line item
    d)  did you check in incompletion log
    G. Lakshmipathi

  • CostCenetr not appearing in service PR for second line item

    Hi Experts,
    When we create a service shopping cart, if there more than one item in the shopping cart , in back end system in service PR under services tab column  Cost Center  is blank for second line item.
    How can we solve this?
    Regards,
    Anubhav

    Hi,
    Problem seesm to be with only one service category..
    Thanks,
    Anubhav

  • Display line items not possible!

    Hello
    I've a very strange situation on the productive system:
    I have a company code that registers and display account line items, while the second cannot display them, even if I've configurated the same aspects in account fields for the two company codes. That means they have the same
    - flag on display line items  AND
    - sort key  001 - POSTING DATE
    why??
    thanks a lot in advance,
    Chiara

    No, the answer was not that one, but thanks anyway.
    Finally I found the answer in
    Forum:  Message MSITEM033 in New GL - Cannot Display GL Line Items
    note OSS:
    -  1323960   Incorrect entry '/' in SKB1-XLGCLR and BSEG-XLGCLR
    -  1149500  Clearing open items by batch input selection
    -  1437341   Note 1437341 - Correction of BSEG/Index tables after note 1323960
    regards,
    Chiara

  • STPO 2nd line item not getting shipping tab

    Hi All,
    We have a issue with STP0, user created the STP0( different company code) with 3 line items of same materials.  The first line items shipping tab is appering but second & third line items are not getting the shipping tab in item detail
    Please help me to resolve the issue.
    Thanks and Regards
    Chandrashekar.R

    Hi,
    Thanks for your update,
    First line item and second line item materials are same.  i have checked the sales views for the supply plant.
    Regards
    Chandrashekar.R

  • Miro line item not generated

    Dear All,
    I have facing one issue at the time posting in MIRO.
    I post one of migo doc in date 03/01/2010 , the entry is:( with same material )
    Post key   description  amt                               curr.( USD)
    89              Stk.RM -IMP                                     32100.00
    96              PL.VND.RM.IMP GR/IR                     32100.00
    40              Purchase RM-IMP                            32100.00
    50              Purchase offset.                             32100.00
    And Miro Posting on date 23/03/2010
    Post key   description  amt                               curr.( USD)
    31           xyz Vendor                                    32100.00
    86           PL.VND.RM.IMP GR/IR                    32100.oo
    89           Stk.RM -IMP                                    -
    40           Purchase RM-IMP                          -
    50           Purchase offset.                           -
    But when I post for another po in migo on date 03/01/2010
    Post key   description  amt                               curr.( USD)
    89              Stk.RM -IMP                                     76800.00
    96              PL.VND.RM.IMP GR/IR                     76800.00
    40              Purchase RM-IMP                            76800.00
    50              Purchase offset.                             76800.00
    and miro posting on date 19/02/2010
    Post key   description  amt                               curr.( USD)
    32            yz Vendor                                       76800.00
    86           PL.VND.RM.IMP GR/IR                      76800.00
    89           Stk.RM -IMP                                      Line item not generated
    40           Purchase RM-IMP                             Line item not generated
    50           Purchase offset.                              Line item not generated
    Can any one tell why line item not generated for miro posting .
    Regards
    Milind

    Hi,
    The extra line items will be generated when there are any exchange rate diffrences are there then only shows.
    Other wise it wont show those extra line items
    Please check group currency , global currency etc. for  your extra line items

  • Line item not relevant for payment release

    Dear Expert,
    When I select payment block : 'Payment Request' in FB60. Error Message appear "Line item not relevant for payment release".
    I also have set payment block in master vendor and  OBB8.
    Can you tell me why the error message still appear?
    Kindly need your help
    Thanks and Regards,
    YL

    Do you have any workflow variant in place?
    Moreover, when you have already set the Payment block at Master level, you need not to fix it in transaction level.
    Vendor itself will not get paid until unless you remove the block option
    Thanks

  • FI Archiving - System error: Customer/vendor line item not on OI basis

    While archiving FI Documetns using object FI_Documnt, I am getting message System error: Customer/vendor line item not on OI basis for few non archivable documents. Is it like these also open items and can not be able to archive them. Or what is the root cause of these error message.
    Regards,
    Shailesh

    Hi Adisha,
    This error pertains to the accounting fundamentals and SAP does not have anything to do with this....you ask yourself that if you were not using SAP and simlar problem came your way what would you have done...this has no solution...
    Either you wait for the next invoice with big amount but which seems bit impractical..
    In this we really need to consult the Accounting Standards to see what it could allow.
    Regards,
    Chintan Joshi

  • TDS line item not generated during down payment.

    Hi,
    TDS line item not generated during down payment to vendors. Advanced tax codes have been properly assigned to vendors.
    Kindly help.
    Thanks in advance...
    Regards,
    Sriram.

    Hi Sriram,
    1.First tell me when you are doing the advance payment tds codes are giving popup or not?
    2.Did you check the setting in below path
    Assign with holding tax types to company codes:
    SPRO>FI>FI GLOBAL>WTX>EWTX>Company code>assign with holding tax to company code.
    Regards
    Surya

  • TDS line Item not flowing in Simulation/Entry

    Hi Expert,
    We made separate tax code for 194A and made all relevant configuration but in vedor invoice entry, tds line item not flowing . Why this happening , please let me know..
    Thanks,
    Dharmveer

    Dear,
    Check the field status for the vendor reconciliation GL account.
    1. check the field status group assigned to vendor reconciliation GL account in FS03.
    2. use transaction OBC4 and select the respective field status group and make all entry optional under TAXES group.
    Regards,
    Chintan Joshi.

  • Tds line item not simulating while posting as reference with FBR2

    Dear All
    When I am posting an Invoice using previous document as reference with Tcode FBR2 WTax line Item not simulating, but while I am posting  without reference  i.e. with Tcode FB60 it is simulating, this problem i am facing in production server from this fiscal year but in development server it is working properly.
    what is the possible cause and how to solve this problem.

    Hi,
    For WHT cannot be deducted by using F-02 OR FB01.  It seems system is using the same transaction in background and not FB60 and hence tds is bnot getting deducted.
    Regards
    Milind Sonalkar

  • Error : Balancing Field " Profit Center" in line item not filled

    Dear Friends,
    I have a specific issue, as my client while posting inventory differences in [MI07]  an error is populating as Balancing Field "Profit Center" in line item not filled.
    Please help me in solving the issue where we can assign the profit center other than in materal master as they donot maintained any profit center in material master for all materials
    Thanks inadvance
    Sri

    Hi BK , thanks for your answer
    in kch3 there are several profit center groups and how can we identify whcih profit center is assigned to whcih profit center group
    regards
    sri

  • Itunes - how do i select multiple line items not in sequence ?

    itunes - how do i select multiple line items not in sequence ?

    Hold down the Command key and click each in succession.
    To extend the selection across items that ARE contiguous, use the Shift key.

Maybe you are looking for

  • Airplay, mirroring, Keynote and image resolution

    There are two ways in which a Keynote presentation running on iPad 2 can be mirrored on an external monitor: (1) through Airplay and Apple TV, or (2) by connecting directly to a monitor using the Digital AV Adapter. My question: is the resolution of

  • Multiple language installations

    Hi All, Does anyone have experience of knowledge of having multiple language installations of the same version i.e. both cs6 indesign. For example having English, French and ME installed, deactivating and activating according to need. Thanks Trevor

  • Syncing Music and Videos

    Since buying the iPad I have been unable to sync music or video. iTunes locks up everytime I try. Gives error message code (-20). Have had tech help from Apple and my Anti virus/Firewall software provider. Added two gigs of RAM. Still having the prob

  • What does it mean by Stream and how does it is different from Class?

    What does it mean by Stream and how does it is different from Class?

  • Graphic card

    Hi, Which card would be better for Photoshop NVIDIA GeForce 9300 GE OR ATI Radeon HD 3650 ? Thank you very much for your attention. JPD