Second MAC computer as remote Airport Speaker for iTunes?

Hello all,
On our MacBook, iTunes is playing all our favorites. Does anybody know whether it is possible to set up another Mac in the same Network as a remote speaker for iTunes? I know about AirFoil but I would prefer something like the "client part" of AirFoil which can directly connect to iTunes.
Thx for any hints on that!

That's not what I want. The music should be the same and in sync on both MACs. Our MacBook is on the ground floor while an iMac is on the first floor.
It should be just the same like using AirPort Express. I would like to have the iMac be available as AirTune-Speaker in iTunes on the MacBook.
I guess it should be possible somehow, as it cannot be a matter of hardware.
Thx for any further ideas!
Message was edited by: Thomas Halenbeck

Similar Messages

  • Having trouble download Lightroom 5 on second Mac computer

    I am not able to download Lightroom for a second Mac computer. Why??

    Thanks Victoria.  I will upgrade to Maverick and see if that corrects the problem.

  • HT4914 If I don't have a computer can I sign up for iTunes Match from my ipad or iPhone?

    If I don't have a computer can I sign up for iTunes Match from my ipad or iPhone?

    Welcome to Apple Support Communities
    I'm sorry, but you need iTunes on a Mac or PC in order to subscribe to iTunes Match > http://support.apple.com/kb/ht4914

  • My computer was stolen so I deauthorized all computers that had iTunes on them on 10/28/2011.  I have a new computer and it was authorized for iTunes.  When I checked my account it says I have 2 authorized computers, but this one should be the only one.

    My computer was stolen so I deauthorized all computers that had iTunes on them on 10/28/2011.  I have a new computer and it was authorized for iTunes.  When I checked my account it says I have 2 authorized computers, but this new computer should be the only one. How can I deauthorize whatever the other computer is?  I don't want whoever stole my old computer to be able to use my iTunes account.

    Get all that music back in itunes and sync again.

  • Mac App Store is stuck looking for itunes.

    Mac App Store is stuck on "One moment please connecting to the itunes store". The mac app store works on the laptop and itunes store works on all devices as well. I have purchased many apps on the iphone, ipad and even itunes on the imac. The Mac App Store will not let me log into my apple id either. Can anyone help? Please

    @dah-veed - I have tried that and all of the information is correct. I downloaded a song and it went through in iTunes. However the Mac app store is still lookin for iTunes. I downloaded iTunes 10.2.2 and reinstalled it. Did not help the Mac app store. I read a couple of articles saying that I will need to re-downloaded 10.6.6 to install a new copy of the Mac app store. I did. Still no help. I went as far as re-downloading 10.6.7. Still the Mac app store is looking for iTunes to no avail.

  • Mac computer network vs airporte

    Hello fellow Mac-o-philes,
    My question is:  Is the wireless network that the Mac computer can create the same as the network that an Airporte base station creates?  Question, being, I was working with a piece of recording equipment (Aja KiPro) that can be controlled via a wireless network, such as is created by an Airporte Base station, or other 802.11 compatible wireless router.  I created a wireless network from my MacBook pro, and although the KiPro could see the network that I created, I could not get it to connect with it.
    Thanks.
    Mike John
    late 2008 MacBook Pro
    OSX 10.6.8

    All, after almost giving up, I solved the problem. I have McAfee installed on my PC. The firewall needed to be configured to allow access to my ip address. once i changed ip setting from "public" to "trusted" I was able to access shared files and printing.

  • Is there a way to play my macs computer audio through airport express?

    I have a stereo receiver that only plays through the auxillary port, and i have been using airport express to play my music and movies in itunes through it. Some of my other movies however are neither in itunes or playable through itunes. Is there a way to send the computer's audio output (not just itunes) through airport express and thus into the stereo receiver? Much help would be appreciated, thanks!

    Try using Airfoil.
    (62000)

  • Airport Express for Itunes Invisible After Adding Time Capsule to AX Networ

    One step forward, one step back.
    I have an airport express linked to my airport extreme network for itunes streaming. It's worked fine forever. I recently added a time capsule to the extreme network for backup purposes using Time Machine. The extreme and TC form a single network are both connected via ethernet. The TC and express are in the same room. Time machine now is working fine. However, the airport extreme is no longer visible in itunes or airport utility. The light is green on the express and I was able to verify the settings when connecting it directly with an ethernet cable.
    In setting up the AX/TC network, it called for the setting 'extend this network' not to be checked. Could that be it? As I recall, it wasn't anyway.
    Any thoughts would be much appreciated.
    JB

    Got this working by directly connecting the Express and TC with and ethernet cable. I don't know if this is the right way for this to work since the two devices just happen to be near enough to do that. That said... I'm happy it's working.
    JB

  • My Second Mac computer keeps getting bumped from my home network

    I use an Airport Extreme Base Station with my Comcast modem. These are hooked up to my main computer, which is a Mac Pro. My second computer, in the other bedroom is an iMac. The iMac keeps getting bumped and even fails to recognize the network at all on some occasions. I have performed updates on both computers as well as the Airport and the iMac is still getting dropped. Is there anyone out there who might be able to share their insights on this? I would greatly appreciate it.

    Welcome to the discussions!
    Open Airport Utility (Hard Drive > Applications > Utilities) and click on Manual Setup.
    Click the Internet icon at the top of the setup page
    Near the bottom of the page, check Connection Sharing. It should be set for "Share a public IP address". Update to save any changes.
    Power down your complete system for 10-15 minutes.
    Start the modem and let it run at least 5 minutes, then start the Extreme and let it run a few minutes, then your computers.
    Any help?

  • How to use a bluetooth connected speaker for iTunes only

    Greetings. I have connected the bluetooth speaker to my mac, and can play itunes on it, but I also hear the computer's beeps and notices through this speaker. This detracts from the musical experience, to say the least. Please help.

    Hi X42:
    Your last paragraph intrigued me as I had the same impression:
      I thought unlicensed BT devices were legally limited by the FCC to about 30 feet (3 meters)
    Actually, 30 feet is 10 meters. 
    Anyway, I researched and found this as part of a Wikipedia item:
    Bluetooth is a standard wire-replacement communications protocol primarily designed for low power consumption, with a short range (power-class-dependent, but effective ranges vary in practice; see table below) based on low-cost transceiver microchips in each device.[7] Because the devices use a radio (broadcast) communications system, they do not have to be in visual line of sight of each other, however a quasi optical wireless path must be viable.[2]
    Class
    Maximum Permitted Power
    Range
    (approximate)
    mW
    dBm
    Class 1
    100
    20
    ~100 meters
    Class 2
    2.5
    4
    ~10 meters
    Class 3
    1
    0
    ~5 meter
    The effective range varies due to propagation conditions, material coverage, production sample variations, antenna configurations and battery conditions. In most cases the effective range of class 2 devices is extended if they connect to a class 1 transceiver, compared to a pure class 2 network. This is accomplished by the higher sensitivity and transmission power of Class 1 devices.[8]
    Apparently there are BT devices that will transmit about 300 feet.  I did look at the FCC site, but quickly became confused in the technbabble.
    Barry

  • Airport Express for iTunes needs rebooting to be detected all the time

    It seems that each time I reboot my macBook, my airport express needs to rebooted to be detected. I use it for streaming music only- not for internet access- and have it configured accordingly. It is connected to remote speakers and works perfectly when it has been rebooted but if I leave it on and have shut down the macBook the green light stays on but the newly rebooted computer doesn't detect the unit until I unplug it and reconnect. Anybody have any helpful info? Thanks in advance...

    Is this message box indicating the Airport Express is re-connecting to your internet service and if so, is this Airport Express connected to a DSL internet service that uses the PPPoE protocol to connect? If so, run the Airport Admin Utility, select your Express, click on the Configure button, click on the Internet tab, and check the box to "always stay connected". Update settings to the Airport Express.

  • Using Airport Express for iTunes on a non-Apple router

    In the past, we used a Microsoft wireless router, and all of the Airport Express stations worked great (we have 3). You can start up iTunes, and iTunes showed all three Airport stations in the popup at the bottom, allowing us to pipe our iTunes music to anywhere in the house.
    The Microsoft router starting going bad (2 years old), and so we replaced it with a Linksys wireless router (the one that also supports a USB printer). The Linksys is working fine for printing on that USB printer from any computer in our LAN, and it provides all the LAN computers with internet connectivity; however, the Airport Express stations are flakey at best.
    At first they didn't even work (aka, didn't show up in iTunes anymore). I ran Airport Admin and connected each one of them to the iMac directly to configure them. After configuring each one, they did start to show up in iTunes. I restored them to their original locations through out the house using wireless connectivity, and they did show up in iTunes and allowed music to play through. Unfortunately, after a day or two, they dropped off, and they never came back. We never had these kinds of headaches with the Microsoft router, so I'm wondering if there is some incompatibility with the Linksys and Airport Express, or if there is some configuration parameter on the Linksys that I need to tweek. Anyone have any ideas?

    I have a similar issue with my Airport Express connected to a Linksys wired router (BEFSR41, the common Linksys 4-port router). My iMac is connected (wired) to one of the ports on the Linksys and the AP Express is connected to one of the other ports. Airport Admin on the iMac can't see it unless I manaully connect to it by specifying the IP address (having fixed its IP from my PowerBook via wireless) and (of course) iTunes on the iMac can't see it either.
    I had an older generation BEFSR41 and this setup worked great, but they must have changed something. I can't seem to figure out how to disable whatever port-to-port (network jack to network jack on the router that is) that they have added the "blocks" Airport Admin utility from seeing it.
    Airport Express   Mac OS X (10.4.8)   Aiport Express connected to a Linksys BEFSR41 wired router.

  • Error message:  Cannot sync songs purchased in iTunes to iTouch because computer is not authorized.  I go in and authorize computer (only computer I have ever used for iTunes), seems to be successful.  Then I try to sync again and it gives same error mesg

    It just goes in a circle.  This computer not authorized to sync purchased songs to iTouch.  Follow directions to authorize computer, seems successful.  Sync again and it comes up with the same error message....this computer not authorized to sync iTune purchases to iTouch.  I have deauthorized the computer and reauthorized and it didn't make a difference.  I updated and restored to factory settings.  Still same error message.  I have had this problem the last 2 times I have synced.  Worked previously.  Any ideas??

    additional info:  I looked into similar complaints.  1 suggested that something is wrong with the files.  Delete them off of computer and divice (but they are not on my divice anymore) and then download them again from iTunes purchase history.  Went in to check iTunes purchases to make sure the songs would be there if I did follow these steps.  Well, NONE of them are in my purchase history.....probably the real problem here.  I had an original iPod Nano and then upgraded to my current iTouch.....same computer for both.  Could there have been a problem at the point of switching over to the iTouch?  That doesn't make sence to me because it is through iTunes and it was the same account for both.  I thought I'd be smart and put all the songs in a playlist and burn to a CD and them load them back in that way.....but I was not authorized to burn to a CD....go figure.  Any idease would be great!!

  • Ipad has message on screen "icloud Backup that it hasn't been done in 3 weeks...... Fully charged it. Using usb, connected to my mac computer, I've synced it with itunes, got updates on itunes with no problems, message remains on ipadscreen.

    Hi.  Not sure what happened but I was able to use my ipad in December and it was backed up(sync with itunes). Now there is a message on the screen "iCloud Backup.....your icloud hasn't been backed up in 3 weeks...." and to click on ok.
    I'm unable to clear the message.  I syned it with itunes and tried again but its still there and I can't do anything with the ipad.  The ipad go blank  in a couple seconds, and I cannot use slide to unlock. 
    Can someone please help me with this.
    Thank you,
    Laura

    See if this helps.
    Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

  • After updating to Lion, my computer is no longer authorized for itunes

    after updating to Lion, when I open Itunes, it says my computer is no longer authorized, and all my music is gone off my phone, and when I click on "authorize", it says that it is already authorized....then i get the never-ending popup loop that says the computer is not authorized...so I say, "authorize", and the popup says it is already authorized...end result being that my music files are mysteriously empty.
    Anyone got a solution for this?
    Thanks,
    C

    I found a discussion thread here which seems to do the trick.  Like you I've authorized, de-authorized etc, but renaming the files seemed to be the only thing that worked.  Here's the detail:
    https://discussions.apple.com/thread/3477094?start=0&tstart=0

Maybe you are looking for

  • Update Master Data records

    Hi, I have to upload records into BW Master Data info objects. When uploading there might be multiple versions of the same record. The latest verison needs to overwrite the existing versions. For Example when loading data into Instrument Info object:

  • Movement type 501 in MIGO doing GR for FG Product

    I am using movement type 501 in MIGO doing GR for FG Product, at that time its giving error 'no manual posting allow to GL Account' We dont want to allow any manual posting in this GL . Can be configure this Movement type like that whenever we do GR

  • The Waiting game has begun

    I just placed an order for my first macintosh, i've been saving my money and just browsing the forums for months and now it comes to me just waiting a few more days. I got the 20" iMac with the 256 video card and 2 gigs of ram. I decided to switch to

  • [svn:fx-trunk] 10216: Change Label verticalAlign to use "top" if there is too much text.

    Revision: 10216 Author:   [email protected] Date:     2009-09-13 08:20:06 -0700 (Sun, 13 Sep 2009) Log Message: Change Label verticalAlign to use "top" if there is too much text.  RichText already works this way. QE Notes: None Doc Notes: None Bugs:

  • Graphics card compatibil​ity with Pavilion 500 machine

    Hello, I want to check whether an Saphire Dual X R9 270X 2GB GDDR5 with boost graphics card    and Corsair CX600 new power supplycan be fitted in an HP Pavilion 500 - 120ea  We have bought the components but the shop I went to to get them fitted plan