Second MacBook Pro with a problem

My first ordered MacBook Pro had a crooked lid. Apple replaced it for me. The next one's lid closed perfectly but since the hard drive made a strange clicking noise, I called Apple Care and they told me that the hard drive must be broken and that I should get it replaced again! What' s wrong with Apple? Now I' m really worried, that the third one could have something wrong with it too... I very annoyed!

It is not out of the realm of possibility that your local shipper is mishandling the packages, or the customs it has to go through is doing that. In the U.S. Customs in Anchorage Alaska has been known to open manufactured machines coming from various points across eastern Asia to inspect for anything suspicious before repackaging the computer. I would at the minimum suggest that to the store. Having multiple Dead on Arrival machines come at once when that's not normal, suggest something else might be happening.
The other possibility is that you have a bad power source in your home. Have an electrician make sure there isn't a possible issue with your power port.
Another is if you transport the machine while it is asleep. The sudden motion sensor should stop issues from happening usually, but there have been known instances where people's machines have woken up, with the lid closed in the bag while being transported. If you run across bad roads while this happens, it can jar the hard drive heads so badly to damage them. I basically shut down my computer before transporting it by road, unless I know the surfaces are always smooth.

Similar Messages

  • Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.

    Premier pro play back screen goes black a freezes every 15 minute . This is my second mac pro with identical problems.

    SOLVED!!!!!
    SO I did some more digging around and read ATI cards seem to overheat easily.  I knew the fan was working, but after closer inspection I realised there was ALOT of built up dust on the card and clogging the fan and airflow.  Blew it out with alot of compressed air, stuck it back in the Mac and BAM...no black screens.  I tested it by streaming 6 video sources...doing 2 screen captures at once as well as watching a HD movie in fullscreen.  Did all this for 30 minutes and no crashes.  I also downloaded an app to monitor the temps inside the computer and the expansion bay stays at 41 degrees.  No clue what it was before but obviously it was hotter than that.  So my problem is solved!  Funny that 10.7.5 made the card work harder.  I wonder if its off loading some CPU stuff to the GPU for processing more than 10.7.4 so its just working a bit harder and so it heats up faster....

  • Can i upgrade 8gb too 16gb on 2012 i7 macbook pro with no problems ?

    Can i upgrade my 8GB Ram too a 16GB in my mid 2012 Macbook Pro i7 without any problems ? The processor is 2.9ghz i7... any help please

    Yep, and you'll notice a very pleasant increase in performance. Choose a reliable brand such as Corsair, Kingston, Crucial, OWC, etc., then visit their portal to use their configurator to determine the correct model for your Mac. Be sure it is Mac-certified for maximum reliability, as these computers are very finicky when it comes to memory.

  • I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you ad

    I have a 2009 Macbook Pro with 1T hdd 8GB Ram and ran Maverick without problem...Yosemite installation has me completely frozen, nothing works but the spinning ball...I had to force shutdown last night, and haven't turned it on again...what do you advise?  During installation emptied cache, etc. Backed up using time machine, fortunately.

    Try these in order testing your system after each to see if it's back to normal:
    1. a. Resetting your Mac's PRAM and NVRAM
        b. Intel-based Macs: Resetting the System Management Controller (SMC)
    2. Restart the computer in Safe Mode, then restart again, normally. If this doesn't help, then:
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    3. Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu. Select Restart from the Apple menu.
    4. Reinstall Yosemite: Reboot from the Recovery HD. Select Reinstall OS X from the Utilities menu, and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.
    5. Reinstall Yosemite from Scratch:
    Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
    How to Clean Install OS X Yosemite
    Note: You will need an active Internet connection. I suggest using Ethernet if possible
                because it is three times faster than wireless.

  • Oracle Installation Problem on MacBook Pro with OS X

    Im trying to install Oracle database 10g on my MacBook Pro with the latest OS version. At first I was a bit confused on which of the links I should download, so I downloaded the client release 1, it was a 300mb aprox download. When the download was over I couldnt run any of the files on my Mac, maybe its because they only run on Mac OS Server? maybe i got the wrong link?
    FORGOT TO READ FIRST... SEEMS LIKE A COMMUN PROBLEM. SORRY
    Message was edited by:
    user575116

    AirPlay Mirroring requires a second-generation Apple TV or later, OS X 10.8 or better and is supported on the following Mac models: iMac (Mid 2011 or newer), Mac mini (Mid 2011 or newer), MacBook Air (Mid 2011 or newer), and MacBook Pro (Early 2011 or newer). You can see which Mac you have and which operating system you are using by selecting 'About this Mac' from the Apple menu in the top left corner of your Mac and selecting the 'More Info' button.

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Can't install HP Color LaserJet 2600n to my new macbook pro with Yosemite ? Message error : "Can't download the software because of a network problem."

    Hello,
    I'm trying to install my HP Color LaserJet 2600n (USB) to my new macbook pro with Yosemite ? It detects the printer but when I try to install it, I get the message error : "Can't download the software because of a network problem."
    I tried to install the software via the HP website. It's not working.
    Can someone help me with this one ?
    Thanks,

    HP Print Drivers

  • HT1338 I updated my MacBook Pro with Mountain Lion and now it is starting slow and opening with some of the programs. How can I fix the problem?

    I updated my MacBook Pro with Mountain Lion and now it is slow in starting up and loads a number of probrams. How can I fix the problem?

    Have you tried starting in Safe Mode and see if the slowness still occurs?
    Restart holding the "shift" key.
    (Expect it to take longer to start this way because it runs a directory check first.)
    If this works look in System Preferences > Users & Groups > Login items and delete any third party login items (-), you can always add them back with the (+). Also look in /Library/Startup Items. Nothing is put in that folder by default, so anything in there is yours.
    Reboot normally and test.

  • I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display.

    I know many have this issue but i can't find a solution to the problem. i get message saying insuffisiant disk space in the volume iPhoto library and i have plenty of space available. i have the new macbook pro with retina display. i have never seen this message before and i have 2 other macbooks and have had many other also. i am assuming this is a problem with the new macbook retina. does anyone know the exact fix to this issue? i have seen many sugestions to try to fix this issue but none have solved the issue for anyone that i can find in the Apple Support Community. thank for looking into this in advance.
    ******A true apple fan********

    Actually your suggestions are the ones that i have tried. i have seen that you have tried to help others with this issue and the only one that i could find that said they found the problem said that it was an ilife update issue and it fixed it and i have no available updates. i know it has to do with something in photo stream because it happens when i create a new library and it is loading the photos but i get the message before i reach the maximum 1000 photos. so i've tried updating, new library(first backing up photos and then deleting them from iPhoto), reinstalling OSX many times, running disc utilities. I called Apple the first day i had this issue and i was the first person to call them for support with the retina display and i actually had it escalated to a senior advisor and we thought we fixed the problem but we did not. i am pretty fluent in dealing with troubleshooting these type of issues and this is the first time i'm reaching out to the community. i figured now that the retina has been out some time now that there would be an obvious answer to this issue. thanks for the quick reply.
    Bebers5

  • My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    My MacBook Pro with Lion 10.7.2, only audio on the headset, and speaker mute. With Windows, the audio works in speaker and headphone jack. What is the problem? What's the solution?

    There is probably a red light on inside your headphone port, indicating that the analog/digital switch in there is stuck in the digital position. Insert a headphone plug and wigle it around, especially in the horizontal plane, as you insert and remove it several times. This will usually unstick the switch and restore normal operation. If it doesn't, the machine will need to be repaired.
    This has been a fairly common problem, but in most cases it is easily cured as described above.

  • So, my Macbook Pro with retina display only prints in black and white. My printer, officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

    So, my Macbook Pro with retina display only prints in black and white. My printer, Officejet 4620 series [555DE4], is not the problem. I want to know how to be able to print in color as well??

    In the Print dialog, select the Color Matching tab and then select Vendor Matching.

  • I have a 15" MacBook Pro with Mountain Lion installed.  I have partitioned the hard drive into two partitions.  Is it possible to install Snow Leopard on the second partition?  If so how do I do it?

    I have a 15" MacBook Pro with Mountain Lion installed.  I have partitioned the hard drive into two partitions.  Is it possible to install Snow Leopard on the second partition?  If so how do I do it?

    If your MacBook Pro had Snow Leopard on it at one time then sure. (Early 2011 or earlier)
    How to erase and install Snow Leopard 10.6
    Obviously choose the second partition to install into. It has to be OS X Extended journaled formatted in Disk Utility (BootCamp software makes it a MSDOS/FAT32 formatted partition if you used that to partition with)
    If it's a Early 2011 or Late 2011 that came with 10.7, it's possible, but it's not easy.
    https://discussions.apple.com/thread/3264421?start=0&tstart=0
    If you can't install Snow Leopard, there is a thread over at MacRumors how to run Snow Leopard in a virtual machine program under 10.7 or 10.8

  • Problems with selection marquee in Photoshop CS5.5 on MacBook Pro with Hi-Res Display

    A few months ago i bought a 15" MacBook Pro with the hi-res display (not retina display...just the higher res display offered prior to the release of the retina display).
    I'm having trouble with Photoshop and selection marquees. In particular, anytime I make a selection while viewing the image at 100% zoom level (so, actual pixels), the "marching ants" selection marquee I draw always shifts over a few pixels after I draw it.
    So I'll make a precise rectangular marquee around an object, and it will look right, until I release the button on my mouse. The moment I release the mouse button, the marquee shifts over a few pixels in both directions (vertically and horizontally).
    This has never happened on any version of Photoshop or on any Mac I've ever used before (and I've been using Photoshop for a LONG time on LOTS of different Macs), so I can only assume it has something to do with the Hi-Res display. This same version of Photoshop works just fine on my previous MacBook Pro laptop. But after installing it on the new MacBook, immediately - and consistently, every time - it happens.
    If I zoom in and use the tool, it doesn't have the problem. It seems to only occur when viewing at 100% (which is usually for me), but it does do it EVERY TIME I use the rectangular marque tool.
    It's driving me a little bit batty.
    Anyone else?

    An update...I had thought to try changing the Open GL settings, but it didn't seem to make any difference. However, I hadn't realized that you need to restart Photoshop for changes made to the Open GL preferences to take effect, so I wasn't actually changing anything.
    Turns out, it's an Open GL drawing issue - and disabling it fixes the problem.
    Of course, you also lose all of the other enhancements that come from enabling Open GL drawing.
    I'm only leaving this discussion up in case anyone else with the same problem stumbles across the issue.

  • I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    I have a new MacBook Pro with OS10.8.2 and cannot get Contacts to print a list of addresses with pictures showing.  There is a check box selecting "picture" which has been checked - but no picture.  This worked fine on OS10.7.5.  Problem??

    First, back up all data immediately, as your boot drive might be failing.
    There are a few other possible causes of generalized slow performance that you can rule out easily.
    Reset the System Management Controller.
    If you have many image or video files on the Desktop with preview icons, move them to another folder.
    If applicable, uncheck all boxes in the iCloud preference pane.
    Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
    Check your keychains in Keychain Access for excessively duplicated items.
    If you have more than one user account, you must be logged in as an administrator to carry out this step.
    Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

  • Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

    Apple macbook pro with retina display is having yellow screen problems in which screen is not perfectly white and is yellowish. More over the service frm apple's part is ridiculous as they have faulty spare part. Does ne1 hv email of senior person?

    Apple service centre employee told me that they do not have this 14 day offer in India.
    And My mac book pro is taken in by Service centre people to run test etc and I will be informed the next day if they accept it as a fault or not ?
    I feeling ridiculously bad.

Maybe you are looking for