Second Monitor and External Drive

Hi everyone, first..sorry in advance if this is in the wrong place but I felt like this covered two topics.
So I have an old ibook g4 thats just collecting dust in my closet and I thought to myself "why not put it to use" so my question is this; can I use it as an external drive and a second screen at the same time?
I already know that if I plug in a firewire cable to both my macbook and ibook and boot it hold (i dont remember what key) it will boot as an external drive and i found this; http://www.screenrecycler.com/ScreenRecycler.html
which looks like it will make my ibook into a second monitor, but how can i do those both at the same time.
All help is appreciated
Thanks!

Your old FW drive is FW 400. New Mac's come with FW 800 ports. You need an adapter from FW 800 to FW 400.
You will also need a Thunderbolt/Mini Displayport to HDMI adapter.
Both of these adapter should be available from your Local electronics store or online retailer, including Apple stores, Online and brick and mortar

Similar Messages

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder "Capture Video" can't be opened because you don't have permission to see its contents.

Leopard. Did a full restore from Time Machine. Now I can't access my other internal and external drives. I get the following error: The folder “Capture Video” can’t be opened because you don’t have permission to see its contents. I have repaired permissions pn the main harddrive. When I try too click on a disk I get the previously stated error. I can't even open up information to see what permission/access there is. It simply will not let me see the content. It shows the content of my main hard drive when I have clicked the other harddrive's name.

Solved:
sudo chflags 0 /Volumes/"FCP Time Machine BU"
sudo chown 0:80 /Volumes/"FCP Time Machine BU"
sudo chmod 775 /Volumes/"FCP Time Machine BU"
sudo chmod -N /Volumes/"FCP Time Machine BU"

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

How can I get Time Machine to back up an external hard drive (iPhotos) that is attached to airport extreme base station. Note: Time machine is usb to macbook pro and external drive with iphotos is usb to airport extreme base station. Help please. Thanks!

Once you have the drive connected to your Mac, click System Preferences (gear icon) on the dock
Click Time Machine
Click Options
Be default, the hard drive will be Excluded from backups. Click the drive to highlight it, then click the "-" (minus) button at the bottom of the list to remove the drive from Excluded items.
The drive will be backed up on the next Time Machine pass
Everything above assumes that the hard drive has been formatted in Mac OS Extended (Journaled) as Time Machine will only backup drives in that format.

Can I use a second monitor and have an extended desktop

Thinking of getting a new imac. Maybe the "20. I was wondering will I be able to hook up a second monitor and be able to either mirror the desktop or have an extended desktop. Will it work in windows?
ibook Mac OS X (10.4.7)
ibook Mac OS X (10.4.7)

Bonjour,
Travailler avec 2 écrans ? Je suppose que ma question est la même, mais je ne suis pas sûr !?!
Question : si l'on branche un 2e écran sur la prise monitor d'un iMac 20' (2006-01), est-il possible, de se servir de ce 2e écran pour y mettre les palettes de ces logiciels, tout en ne gardant que la fenêtre principle du fichier sur l'écran de l'iMac ?
Merci.
JMG
Hello,
To work with 2 screens? I suppose that my question is the same one, but I am not sure!?!
Question: if one connects a 2e screen on catch monitor of a iMac 20' (2006-01), is it possible, to be useful itself of this 2e screen to put the pallets of this software at it, while keeping only the window principle file on the screen of the iMac?
Thank you.
JMG
G4/1,25MHz + iBookG3(Green) /366MHz + Epson SC980 Mac OS X (10.3.7)

Cannot install Yosemite as it keeps telling me both my internal and external drives are time machine backups

Cannot install Yosemite. Keeps telling me that both my internal and external
drives are backing up with TIme Machine. Any suggestions?

Is it actively backing up, or are you encountering a dialog stating that Yosemite cannot be installed because the disk is being used for Time Machine backups?
Read OS X: Cannot install on a volume used by Time Machine for backups
If for some reason you have a folder called Backups.backupdb at the root level of the hard disk on which you want to install Yosemite, move it to the Trash.

Why did my event library stopped showing my partitions and external drives?

The event library stopped recognizing my computer partitions and my external hardrive. It looks like all events are available, just not organized by partitions and drives. The partitions and external drive still show up in the project library.

I don't see anything like what you mentioned... " having a folder at the root level that emulates a camera, a folder with a name like DCIM or Private." Here are the windows showing the files on the user/HD, the tutorial image and the external drive. You can see the Final Cut Folders in each. In the past, I would see each of these in the Event Library so I could create a new event wherever I want to store it. I have also included a screen shot of FCPX showing the Project Library. It still shows the various devices, as I am used to seeing in the Event Library.

I can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive.

i can't import any photos. 'Could not copy to requested location' is the given but i have tried importing to both hard drive and external drive. Help please ?

Most likely, the "requested location" where you are trying to copy files to does not have WRITE permission, and so you need to change the permissions.

How do I Retrieve imovie projects from and external drive back into my mac internal drive

How do I Retrieve imovie projects from and external drive back into my mac internal drive?
Thank You

Every working drive, Internal or External, should produce an Icon on your Desktop. If you cannot see those, click on the Desktop (to get Finder) and choose Preferences off the Finder Menu. The general pane has checkboxes for "Show these items on the Desktop:"
Double click the Icon for your External Drive to open it. Open the folders on it until you find the Items you want to copy. Drag them to the Icon of your Internal Drive, or open the folder where you want them to land and drop them in there.
A drive that does not appear on the desktop after you have asked it to may be damaged. But it would be smart to do a Restart to see if it is recognized again at next Startup.

My computer crashed. I saved my music in cloud and external drives. Re-installed iTunes on computer. No playlists are listed. Will I lose them if I connect my iPod to the computer?

My computer crashed. I saved my music in cloud and external drives. Re-installed iTunes on computer. No playlists are listed. Will I lose them if I connect my iPod to the computer? Some of my playlists are work related. I NEED THEM! Don't want to lose them!

Was the ENTIRE iTunes folder copied from the computer to the External drive? If so, simply copy it back and everything in iTunes will be exactly as it was in iTunes.

Backing up Air SSD and external drive to Time Machine

Hi
Sincere apologies if this has been asked and answered but I cannot find an answer or phrase a search properly to do so.
I have a 500gb MacBook and am planning to get a MacBook Air. I would like to move much of the content from my MacBook to an external drive b/c it won't fit on the Air--music, photos, etc.
What I cannot seem to understand is how I will then back it all up. That is, I will have some content on my Air that I use frequently--work files and so forth--and I will have mostly media on the external drive. Do I then use a second external hard drive for Time Machine backups and if so can I set it to back up my Air's SSD and the external drive that is storing my media files? (In case it's relevant, I also currently back up my MacBook offsite using Crashplan.)
I hope I phrased this correctly and that my question is clear.
A related question: Part of the reason for wanting to get an Air is the increased ease of mobility. I would like to have some music stored on the Air, and accessible via iTunes, so that I can listen to it when I take it to the office, when traveling, etc. Is this possible?
Thank you very much

Correct. Having Time Machine store it's backups on the same drive as data it's backing up is mostly self defeating. If that drive were to fail then you'll lose the data and it's backup. Time Machine to Time Capsule is also great because it is wireless and just needs to have power nearby. You can even hide it behind furniture in the house (out of site) and it'll still backup continuously whenever your laptop is in the house and not sleeping. It's so easy you'll forget about it until you need it someday.
If you want an ideal home backup solution I would recommend:
1) A TimeCapsule on your home network to serve as your passive, local, incremental backup system for accidental file deletions, or rolling back changes.
2) Use a cloud backup service such as CrashPlan or BackBlaze for passive, off-site backups in case of a disaster (fire, theft, etc.)
3) And lastly, it's always nice to have a third backup type, a bootable clone (using SuperDuper!, etc.) that you actively create just prior to any major upgrade of Mac OS
Having even one of these puts you far ahead of the majority of home computer users. Having all three backup types should give you great piece of mind that you are really protecting your data files and media.

Using Time Capsule to back up Mac Book Pro and external drive

we're changing our main computer in the house to our mac book pro, which is not currently backed up, so i'm thinking of buying a time capsule. our current main machine is an old pc with two external hard drives connected....one used as the main file storage location and the second as a back up location. the main large files on these drivers are photo's, videos and scanned documents. can i use the time capsule to back up the mac book with an external hard drive connected to it? i'm thinking of leaving all the photo's, videos, documents, etc. on the external harddrive but want to be able to back it up to the time capsule as well as backing up the mac book pro. can backing up the external hard drive be set up to activate automatically daily as I think the mac book can? thanks

This is not as simple as it could be..
Firstly the Mac can read the external drives via the PC if they are shared to the network.. it cannot read them directly plugged into the Mac or the TC.
Also the TC is not really designed to store files.. it is a location for backups by TM..
Read some of the stuff Pondini.. our local Time Machine expert.
http://pondini.org/TM/FAQ.html
Q3 here is relevant. http://pondini.org/TM/Time_Capsule.html
The hard drives would have to be plugged directly into the Mac to be backed up and they would have to be reformatted to Mac format. So you would need to offload the files.. format and then load the files back.. no trivial task.

Error 36 and External Drive File Copy Problem & USB Connections

In attempting to copy a folder with some 200G+ of files from my iMAC, with OSX 10.6.7, to an external portable WD 1Tb HD, newly formatted to HFS+ (journaled), and connected to the iMAC via a USB cable to the USB port on the iMAC keyboard, I kept getting an error message that Finder could not complete the operation as some data couild not be read or written and transfered, and gave the "Error Code -36". After some searching ont he internet for this error code I came across a host forums discussiong the error code BUT all referred to it being the result of MAC OS hidden "dot-underscore" companioned files being created when the MAC OS X file system copies or moves files to a FAT16 or FAT32 volume. This was not the situaion in my case a both drives were OS X formatted HFS+. Eventually I came across a very vague reference to the error also occuring when the cable connection with the external HD was not solid. I reconnected my external HD and attempted the file transfer again - with the same result. Eventually I decided to plug the external HD into a USB pot on the back of the iMA itself, rather than the keyboard set. Sure enough the error issue disappeared - the transfer successfully completed.
So my question relates to the "usb connection" challenge with iMAC. the iMAC has only 4 USB ports on the back directly. I did have two desktop external HDs plugged into 2 of these USB ports at the back of the iMAC, as well as a WACOM pad device into the 3rd, and an EPSON 3880 printer into the 4th, and so was forced to employ the ports ont he keyboard for portable HD. So - what's the answer in a situation where the 4 are insufficient and it would appear that the keyboard ports seemed to be unpowered?? Any suggestions?

It's actually a Time Machine backup drive which is formatted in Mac OS Extended (Journaled). I wish I'd copied the exact error message.
I believe it was something to the effect of "Error 36: The file could not be copied because some of the date could be be read/written" or something along those lines. Next time it comes up I'll copy it. I have Drive Genius running with DrivePulse, but it doesn't ever seem to start.
My biggest concern is that this is a sign that the drive is failing. When backing up, it also slows, or stops midway through and just hangs there. Though I haven't done a lot of extensive testing on that because if the drive is failing, I don't want to speed that process up any more.
To add to the complication, there is a second external drive which Time Machine is also backing up for me. There is one particular file, the Virtual Machine file, I was trying to get off the other external drive and it produced the same problem. That's when I went into Time Machine to try and retrieve the file that way and it did the same thing. The other external drive is making some sounds, but it doesn't sound like a distinct clicking, more like a more pronounced version of the normal constipated hard-drive sound. The Time Machine drive, isn't making any obviously strange sounds at all.
So, I can't tell whether the drives are failing or if it could actually be that particular file itself causing some strange problems.

[Solved] no signal w/ second monitor and dual screen using nouveau, i3

Hi!
I just brought my old screen to my room and try to make it work. It works when the other one is not connected, so no hardware problems. The result is that I can go to the right and do stuff and move the window to my working screen, but the monitor stays black and says "no signal". I tried a long time with nouveau but without success. I was not able to make the graphic card work with the propretary driver from the website and I don't want to downgrade the xorg-server to 1.12 to install nvidia-96xx...
%lspci | grep VGA [0]
01:00.0 VGA compatible controller: NVIDIA Corporation G94 [GeForce 9600 GT] (rev a1)
%xrandr [0]
Screen 0: minimum 320 x 200, current 3200 x 1200, maximum 8192 x 8192
DVI-I-1 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
1920x1200 60.0*+
1920x1080 60.0
1600x1200 60.0
1680x1050 59.9
1280x1024 60.0
1280x960 60.0
1024x768 60.0
800x600 60.3
640x480 60.0
720x400 70.1
DVI-I-2 connected 1280x1024+1920+0 (normal left inverted right x axis y axis) 376mm x 301mm
1280x1024 60.0*+ 75.0
1280x960 60.0
1152x864 75.0
1024x768 75.1 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
%cat .i3/config
### ommitted lines
# Multi-monitor setup
workspace 1 output DVI-I-1
workspace 2 output DVI-I-1
workspace 3 output DVI-I-1
workspace 4 output DVI-I-1
workspace 5 output DVI-I-2
workspace 6 output DVI-I-2
workspace 7 output DVI-I-2
workspace 8 output DVI-I-2
workspace 9 output DVI-I-2
workspace 0 output DVI-I-1
### ommitted lines
How I connect it:
%xrandr --output DVI-I-2 --right-of DVI-I-1
nl /etc/X11/xorg.conf.d/20-nouveau.conf [1]
1 # the left one
2 Section "Monitor"
3 Identifier "DELL"
4 Option "PreferredMode" "1920x1200_60.00"
5 EndSection
6 # the right one
7 Section "Monitor"
8 Identifier "NEC"
9 Option "PreferredMode" "1280x1024_60.00"
10 Option "RightOf" "DELL"
11 EndSection
12 Section "Device"
13 Identifier "nvidia card"
14 Driver "nouveau"
15 Option "Monitor-DVI-I-1" "DELL"
16 Option "Monitor-DVI-I-2" "NEC"
17 EndSection
18 Section "Screen"
19 Identifier "screen1"
20 Monitor "NEC"
21 DefaultDepth 24
22 SubSection "Display"
23 Depth 24
24 Virtual 3200 2224
25 EndSubSection
26 Device "nvidia card"
27 EndSection
28 Section "ServerLayout"
29 Identifier "layout1"
30 Screen "screen1"
31 EndSection
I don't know what I should try. I haven't tried yet the "old-school" Xinerama stuff, but it seems tedious and error-prone...unless someone tells me that it is actually a different and possibly working approach I'm not going to try it. Any hint is welcome! :-)
Best,
Marc
Last edited by Maximalminimalist (2013-11-20 09:57:44)

Hi!
Thanks for pointing out the repo..I did yaourt -Ss nvidia from the beginning and I didn't pay attention to the nvidia package. Sometimes archlinux is more user-friendly than one expects...
So now my second monitor works. :-)
Moral of the story:
If you want to use the NVIDIA driver, read
https://wiki.archlinux.org/index.php/Nvidia
And if it doesn't work, read
https://wiki.archlinux.org/index.php/Nvidia
again, because maybe you missed something...
Best,
Marc

Best way to have an iMac second monitor and Thunderbolt daisy chain?

I'm getting new iMacs for my school lab & wish to daisy chain with Thunderbolt cables into pods of 6 for backing up. I also want to run a second monitor with each iMac. What is the best way to do this since both Thunderbolt ports will be used? USB 3.0 to HDMI?

Canadian Tech Teacher wrote:
By "pods" I had meant creating little LAN's of 6 computers connected to a Thunderbolt drive but I've been doing a lot of reading and now I'm wondering about whether that can actually be done?
The only Mac to Mac connections that Thunderbolt supports that I know of are target disk mode & target display mode, neither of which supports a daisy chain topology or is suitable for a multi-host LAN. (Only one Mac can be the host in either of these modes.)
However, if you want to crete six computer LANs for backups, you could use traditional Ethernet or WiFi LANs & (for instance) a large NAS drive array, or Airport Extreme Base Stations with one or more USB drives attached to them. You could also use Time Capsules, but that is more expensive than going with AEBS's & attached drives. Obviously, wired LAN's would be more suitable for multiple "pods" of six Macs, both because of better reliability & elimination of WiFi channel contention that would show down wireless throughput.
Of course, this isn't as fast as a Thunderbolt drive connected directly to a Mac, but the only way I know of to do that is by connecting to one Mac at a time, which probably would negate any backup copying speed advantage.
Thunderbolt drives (& cables) are expensive so their use is really only justified where very high speed data transfers are necessary. If you don't need that, you might consider a simpler solution of one (or for redundancy two) USB 3.0 drives per iMac, since they are relatively cheap & still offer high speed data transfers.

Daisy chain monitors and hard drive

How can I connect two additional monitors and an external hard drive to my iMac?

Only Thunderbolt allows for chaining Displays and External Hard Drives.
In addition your Thunderbolt devices must have an additional Thunderbolt port to chain the next device to.
Apple - Thunderbolt: Next-generation high-speed I/O technology.

Second Monitor and External Drive

Similar Messages

Maybe you are looking for