Second primary server : something to do on the workstations?

Hi,
I have installed a second primary server in the zone, and this server has been moved up in the list of closest server default rules.
I am about to follow the "Replacing the First Primary Server with the Second Primary Server" procedure. The plan is to decommission the older server.
However I have a concern about the workstations. The agent on them has been installed from the first primary server, so is there something to do on the workstations so that they will stop connecting to the server from which the agent was installed?
Another point: both servers are using an external CA, so I guess I don't have to do the "Export the Certificate Authority role" part?
Thanks,
Marc Delisle

There is nothing you "have to do".
A "zac retr" could be useful, but hard to script.
In short, if a device ever stops talking to the zone because something
goes wrong, it will use the details in the "initial-web-service" file to
recontact the zone. The details in this file are for the server from
which the agent was installed.
On 3/25/2013 11:56 AM, lem9 wrote:
>
> Hi,
>
> I have installed a second primary server in the zone, and this server
> has been moved up in the list of closest server default rules.
>
> I am about to follow the "Replacing the First Primary Server with the
> Second Primary Server" procedure. The plan is to decommission the older
> server.
>
> However I have a concern about the workstations. The agent on them has
> been installed from the first primary server, so is there something to
> do on the workstations so that they will stop connecting to the server
> from which the agent was installed?
>
> Another point: both servers are using an external CA, so I guess I
> don't have to do the "Export the Certificate Authority role" part?
>
> Thanks,
> Marc Delisle
>
>
Craig Wilson - MCNE, MCSE, CCNA
Novell Knowledge Partner
Novell does not officially monitor these forums.
Suggestions/Opinions/Statements made by me are solely my own.
These thoughts may not be shared by either Novell or any rational human.

Similar Messages

  • Second Primary Server

    Last week I setup a second primary server for redundancy. Everything seemed to work well so I left it alone for several days so everything could sync up. I started getting calls that Vista / 7 logins were very slow, users would press CTRL-ALT-DEL to login and get a blank screen for a few mins before logging in. Once logged in life was good. I checked DNS and everything looked OK both ways. I removed Zen from that server and had a lab of 40 machines refresh then reboot. The problem was gone. Any thoughts on what could cause this?
    It's Zen 10.3.3 on a 2008R2 server (both were)
    MSSQL 2005 Enterprise for the DB
    Thanks for any input!

    Thanks for getting back to me guys. It was just a plain install of Zen selecting an exsisting domain and running through the wizard. It placed the server in the servers list in the configuration console. I did not notice if it was hammering the SQL server or not - however about 1/2 of the machines were working perfectly. Would there be any logs I can check anywhere?
    Thanks again!
    Originally Posted by craig_wilson
    Did you change any Closest Server Rules to place this Server 1st in the
    list? If so, then it could have been the issue below. If not, I would
    suspect that most devices were not even hitting this server. I would
    wonder if somehow the 2nd server hitting the DB very hard for some
    reasons and causing DB performance issues.
    Did you install ZRS or something else on that server?
    On 2/1/2012 5:46 AM, nop1983 wrote:
    >
    > Is it just ZENworks that's slow to login?
    >
    > Could be a problem with the new server not able to make the
    > authenticate request or something like that.
    >
    > ddevore9;2172176 Wrote:
    >> Last week I setup a second primary server for redundancy. Everything
    >> seemed to work well so I left it alone for several days so everything
    >> could sync up. I started getting calls that Vista / 7 logins were very
    >> slow, users would press CTRL-ALT-DEL to login and get a blank screen for
    >> a few mins before logging in. Once logged in life was good. I checked
    >> DNS and everything looked OK both ways. I removed Zen from that server
    >> and had a lab of 40 machines refresh then reboot. The problem was gone.
    >> Any thoughts on what could cause this?
    >>
    >> It's Zen 10.3.3 on a 2008R2 server (both were)
    >> MSSQL 2005 Enterprise for the DB
    >>
    >> Thanks for any input!
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Install Second Primary Server in a 11.3.1 FRU1 zone

    Hi I'm having a weird problem with installing a second PS in to a upgraded singel PS zone. I just got the singel server upgraded to 11.3.1 FRU1/SLES11.3 and database on MSSQL 2012.
    That is working great, no issues with the singel server.
    But when I try to install the new server as a PS to the existing zone I get this error, "This version of ZENworks is not compatible with the version (10.3.0) found in the zone"...10.3.0 ???
    I tried to look for any clueds in the ZenServerVersion.xml file after finding TID7014023, https://www.novell.com/support/kb/doc.php?id=7014023. The file says 11.3.1 in the file.
    Why do I get the 10.3.0. message and how can I correct this?
    Any Ideas?

    Kkb,
    I can confirm this happens - if you can open a SR with Novell, that's
    the quickest way to get this moving - meanwhile I will report it to
    Novell, also
    Shaun Pond
    newly reminted as a Knowledge Professional

  • Print Server Win2K8 - how to trace the workstations?

    Hi Experts,
    In my organization having a printer server and 15 Printers. All printers configured from Print Server. lso
    Some one have printed sexual document 250 pages. Is there any we can trace that system or ip address?  Also in my org we don’t have tool to trace.
    Print Server OS: Win2K8
    Need your help on this. Thanks in advance.
    Regards,
    Pavan
    Thanks & Regards,
    Pavan

    Not a right place for this question.
    Ask this question in Windows Server Forum.
    Cheers,
    Gulab Prasad
    Technology Consultant
    Blog:
    http://www.exchangeranger.com    Twitter:
      LinkedIn:
       Check out CodeTwo’s tools for Exchange admins
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • How do I locate on my I Phone 3GS the primary server

    how do I verify on my mail primary server via  settings? Can the primary server be changed? How?

    Open iTunes on your computer and click Backup Now in iTunes under the tab for your iPhone

  • Something to do over the holidays

    I dont want to put pressure on my brains during holidays ...:(
    but ALAS!!  will try to work on this shameless thing.

    There is nothing you "have to do".
    A "zac retr" could be useful, but hard to script.
    In short, if a device ever stops talking to the zone because something
    goes wrong, it will use the details in the "initial-web-service" file to
    recontact the zone. The details in this file are for the server from
    which the agent was installed.
    On 3/25/2013 11:56 AM, lem9 wrote:
    >
    > Hi,
    >
    > I have installed a second primary server in the zone, and this server
    > has been moved up in the list of closest server default rules.
    >
    > I am about to follow the "Replacing the First Primary Server with the
    > Second Primary Server" procedure. The plan is to decommission the older
    > server.
    >
    > However I have a concern about the workstations. The agent on them has
    > been installed from the first primary server, so is there something to
    > do on the workstations so that they will stop connecting to the server
    > from which the agent was installed?
    >
    > Another point: both servers are using an external CA, so I guess I
    > don't have to do the "Export the Certificate Authority role" part?
    >
    > Thanks,
    > Marc Delisle
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • Primary Server - No Content role all of a sudden

    Hi
    We have ZCM Version 10.3.0 running on SLES10 Servers in our setup.
    We have 2 primary Servers, but all of a sudden the content role has disappeared on the first Server. So if you click Devices | Servers | SLES1 | Content (tab) it returns:
    'No content status to display because device does not have a content role'
    If I click Configuration | Primary Server Replication it only lists the second Server and not the first one.
    Under Configuration | Server Hierarchy we also have the Sat Servers listed under both Primary Servers so nothing has changed.
    My colleague noticed the problem adding a new bundle and we saw disk space on the first Server was around 1.3GB. So I cleared some space and it is now around 10GB free.
    Since then I have created a new bundle and within the ZCC.LOG I have seen the following messages appear:
    06 Mar 2013 08:36:25 ReplicationBaseSet..423 :Current replication mode set to: UNKNOWN
    06 Mar 2013 08:45:28 ReplicationBaseSet..423 :Current replication mode set to: REPLICATION_ALL_SERVERS
    06 Mar 2013 08:49:20 ReplicationBaseSet..423 :Current replication mode set to: REPLICATION_ALL_SERVERS
    06 Mar 2013 09:36:25 ReplicationBaseSet..423 :Current replication mode set to: UNKNOWN
    I have also tried renaming the content-repo folder on SLES1 and it does recreate itself and copy the content back across showing replication is working.
    Finally if I run novell-zenworks-configure -c SystemStatus this error gets returned:
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    |_ / __| \| Novell_____ _ _| |_____
    / /| _|| .` \ V V / _ \ '_| / (_-<
    /___|___|_|\_|\_/\_/\___/_| |_\_Y__/ ~ v.10.3
    ================================================
    ZENworks 10.3 Configuration Utility
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    For each prompt presented, press 'enter' to accept the (default) value, type
    'back' to return to the previous action, or type 'quit' to exit.
    com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: java.io.EOFException
    at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.<init>(CertificateManagerImpl.java:113 )
    at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.getDefault(CertificateManagerImpl.java :78)
    at com.novell.zenworks.datamodel.services.DirectServi ceStoreImpl.initialize(DirectServiceStoreImpl.java :143)
    at com.novell.zenworks.datamodel.services.ServiceStor eFactory.factoryServiceStore(ServiceStoreFactory.j ava:182)
    at com.novell.zenworks.datamodel.services.ServiceStor eFactory.factoryServiceStore(ServiceStoreFactory.j ava:153)
    at com.novell.zenworks.configure.actions.SystemStatus ConfigureAction.configure(SystemStatusConfigureAct ion.java:191)
    at com.novell.zenworks.configure.actions.SystemStatus ConfigureAction.configure(SystemStatusConfigureAct ion.java:157)
    at com.novell.zenworks.configure.ZENworksConfigure.ex ecConfigAction(ZENworksConfigure.java:1327)
    at com.novell.zenworks.configure.ZENworksConfigure.co nfigure(ZENworksConfigure.java:1184)
    at com.novell.zenworks.configure.ZENworksConfigure.ma in(ZENworksConfigure.java:1103)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Nativ e Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(Native MethodAccessorImpl.java:39)
    at sun.reflect.DelegatingMethodAccessorImpl.invoke(De legatingMethodAccessorImpl.java:25)
    at java.lang.reflect.Method.invoke(Method.java:592)
    at com.novell.zenworks.configure.ConfigureLoader.main (ConfigureLoader.java:39)
    Caused by: com.novell.zenworks.datamodel.exceptions.InternalD ataModelException: java.io.EOFException
    at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.reloadKeyStore(CertificateManagerImpl. java:172)
    at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.<init>(CertificateManagerImpl.java:109 )
    ... 14 more
    Caused by: java.io.EOFException
    at java.io.DataInputStream.readInt(DataInputStream.ja va:358)
    at sun.security.provider.JavaKeyStore.engineLoad(Java KeyStore.java:627)
    at java.security.KeyStore.load(KeyStore.java:1150)
    at com.novell.zenworks.datamodel.services.Certificate ManagerImpl.reloadKeyStore(CertificateManagerImpl. java:160)
    ... 15 more
    SEVERE: null
    <>
    Any help or advice would be greatly appreciated.
    Regards,
    Ant

    I would recommend an SR.
    This could happens sometimes on 10.3.0, but was years ago in one of the
    10.3 updates.
    On 3/6/2013 4:56 AM, akeaveney wrote:
    >
    > Hi
    >
    > We have ZCM Version 10.3.0 running on SLES10 Servers in our setup.
    >
    > We have 2 primary Servers, but all of a sudden the content role has
    > disappeared on the first Server. So if you click *Devices | Servers |
    > SLES1 | Content (tab)* it returns:
    >
    > -*'No content status to display because device does not have a content
    > role'*-
    >
    > If I click *Configuration | Primary Server Replication* it only lists
    > the second Server and not the first one.
    >
    > Under *Configuration | Server Hierarchy* we also have the Sat Servers
    > listed under both Primary Servers so nothing has changed.
    >
    > My colleague noticed the problem adding a new bundle and we saw disk
    > space on the first Server was around 1.3GB. So I cleared some space and
    > it is now around 10GB free.
    >
    > Since then I have created a new bundle and within the *ZCC.LOG* I have
    > seen the following messages appear:
    >
    > 06 MAR 2013 08:36:25 REPLICATIONBASESET..423 :CURRENT REPLICATION MODE
    > SET TO: UNKNOWN
    > 06 MAR 2013 08:45:28 REPLICATIONBASESET..423 :CURRENT REPLICATION MODE
    > SET TO: REPLICATION_ALL_SERVERS
    > 06 MAR 2013 08:49:20 REPLICATIONBASESET..423 :CURRENT REPLICATION MODE
    > SET TO: REPLICATION_ALL_SERVERS
    > 06 MAR 2013 09:36:25 REPLICATIONBASESET..423 :CURRENT REPLICATION MODE
    > SET TO: UNKNOWN
    >
    >
    > I have also tried renaming the content-repo folder on SLES1 and it does
    > recreate itself and copy the content back across showing replication is
    > working.
    >
    > Finally if I run *novell-zenworks-configure -c SystemStatus* this error
    > gets returned:
    >
    >
    > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    >
    > _______ _ _ _
    > |_ / __| \| NOVELL_____ _ _| |_____
    > / /| _|| .` \ V V / _ \ '_| / (_-<
    > /___|___|_|\_|\_/\_/\___/_| |_\_Y__/ ~ V.10.3
    > ================================================
    > ZENWORKS 10.3 CONFIGURATION UTILITY
    >
    > ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    >
    >
    >
    >
    > FOR EACH PROMPT PRESENTED, PRESS 'ENTER' TO ACCEPT THE (DEFAULT) VALUE,
    > TYPE
    > 'BACK' TO RETURN TO THE PREVIOUS ACTION, OR TYPE 'QUIT' TO EXIT.
    >
    > COM.NOVELL.ZENWORKS.DATAMODEL.EXCEPTIONS.INTERNALD ATAMODELEXCEPTION:
    > COM.NOVELL.ZENWORKS.DATAMODEL.EXCEPTIONS.INTERNALD ATAMODELEXCEPTION:
    > JAVA.IO.EOFEXCEPTION
    > AT
    > COM.NOVELL.ZENWORKS.DATAMODEL.SERVICES.CERTIFICATE MANAGERIMPL.<INIT>(CERTIFICATEMANAGERIMPL.JAVA:113 )
    > AT
    > COM.NOVELL.ZENWORKS.DATAMODEL.SERVICES.CERTIFICATE MANAGERIMPL.GETDEFAULT(CERTIFICATEMANAGERIMPL.JAVA :78)
    > AT
    > COM.NOVELL.ZENWORKS.DATAMODEL.SERVICES.DIRECTSERVI CESTOREIMPL.INITIALIZE(DIRECTSERVICESTOREIMPL.JAVA :143)
    > AT
    > COM.NOVELL.ZENWORKS.DATAMODEL.SERVICES.SERVICESTOR EFACTORY.FACTORYSERVICESTORE(SERVICESTOREFACTORY.J AVA:182)
    > AT
    > COM.NOVELL.ZENWORKS.DATAMODEL.SERVICES.SERVICESTOR EFACTORY.FACTORYSERVICESTORE(SERVICESTOREFACTORY.J AVA:153)
    > AT
    > COM.NOVELL.ZENWORKS.CONFIGURE.ACTIONS.SYSTEMSTATUS CONFIGUREACTION.CONFIGURE(SYSTEMSTATUSCONFIGUREACT ION.JAVA:191)
    > AT
    > COM.NOVELL.ZENWORKS.CONFIGURE.ACTIONS.SYSTEMSTATUS CONFIGUREACTION.CONFIGURE(SYSTEMSTATUSCONFIGUREACT ION.JAVA:157)
    > AT
    > COM.NOVELL.ZENWORKS.CONFIGURE.ZENWORKSCONFIGURE.EX ECCONFIGACTION(ZENWORKSCONFIGURE.JAVA:1327)
    > AT
    > COM.NOVELL.ZENWORKS.CONFIGURE.ZENWORKSCONFIGURE.CO NFIGURE(ZENWORKSCONFIGURE.JAVA:1184)
    > AT
    > COM.NOVELL.ZENWORKS.CONFIGURE.ZENWORKSCONFIGURE.MA IN(ZENWORKSCONFIGURE.JAVA:1103)
    > AT SUN.REFLECT.NATIVEMETHODACCESSORIMPL.INVOKE0(NATIV E METHOD)
    > AT
    > SUN.REFLECT.NATIVEMETHODACCESSORIMPL.INVOKE(NATIVE METHODACCESSORIMPL.JAVA:39)
    > AT
    > SUN.REFLECT.DELEGATINGMETHODACCESSORIMPL.INVOKE(DE LEGATINGMETHODACCESSORIMPL.JAVA:25)
    > AT JAVA.LANG.REFLECT.METHOD.INVOKE(METHOD.JAVA:592)
    > AT
    > COM.NOVELL.ZENWORKS.CONFIGURE.CONFIGURELOADER.MAIN (CONFIGURELOADER.JAVA:39)
    > CAUSED BY:
    > COM.NOVELL.ZENWORKS.DATAMODEL.EXCEPTIONS.INTERNALD ATAMODELEXCEPTION:
    > JAVA.IO.EOFEXCEPTION
    > AT
    > COM.NOVELL.ZENWORKS.DATAMODEL.SERVICES.CERTIFICATE MANAGERIMPL.RELOADKEYSTORE(CERTIFICATEMANAGERIMPL. JAVA:172)
    > AT
    > COM.NOVELL.ZENWORKS.DATAMODEL.SERVICES.CERTIFICATE MANAGERIMPL.<INIT>(CERTIFICATEMANAGERIMPL.JAVA:109 )
    > ... 14 MORE
    > CAUSED BY: JAVA.IO.EOFEXCEPTION
    > AT JAVA.IO.DATAINPUTSTREAM.READINT(DATAINPUTSTREAM.JA VA:358)
    > AT
    > SUN.SECURITY.PROVIDER.JAVAKEYSTORE.ENGINELOAD(JAVA KEYSTORE.JAVA:627)
    > AT JAVA.SECURITY.KEYSTORE.LOAD(KEYSTORE.JAVA:1150)
    > AT
    > COM.NOVELL.ZENWORKS.DATAMODEL.SERVICES.CERTIFICATE MANAGERIMPL.RELOADKEYSTORE(CERTIFICATEMANAGERIMPL. JAVA:160)
    > ... 15 MORE
    > SEVERE: NULL
    > <>
    >
    > Any help or advice would be greatly appreciated.
    >
    > Regards,
    > Ant
    >
    >
    Craig Wilson - MCNE, MCSE, CCNA
    Novell Knowledge Partner
    Novell does not officially monitor these forums.
    Suggestions/Opinions/Statements made by me are solely my own.
    These thoughts may not be shared by either Novell or any rational human.

  • ZCM 11.2 Second Primary - SSL Configuration

    Primary Server 11.2.4MU1 on OES 11SP2 - Running ZCM11.2.4MU1 / DSFW / DNS
    I am attempting to bring up a Second Primary Server. Maybe I am miss reading the documentation, however Each time I attempt the setup and bring the second primary into the "Existing" zone I give it the DNS / IP of the server, the correct Port - 444 In this case, and user / password. It authenticates fine, asks me to import the CA / MGMT Zone Cert. I click yes. Then I am taken to the SSL Configuration page.
    From my reading I believe I should not be taken to this page.... I believe this should only be done if its a new server as the secondary should import and use the primary?
    Currently my Plan was to bring up a secondary Primary and look at doing a DB / Content Migration, as I can not upgrade the current 11.2.4MU1 to 11.3 as install on OES is not supported (any longer).
    I could be a bit discombobulated....
    Thanks
    Patrick

    Never mind.....I forgot about the CSR / Cert generation part of the Zenworks setup...

  • Can't delete primary zone in DNS after moving the server

    Woe is me!
    Our MacMini was hosted at a Colo site and working fine. No firewall in front of the machine, so we turned on the server firewall and only allowed mail, web, ftp, and a couple of other services. This worked great using our external public DNS wired to our domain names and public fixed IP address. Later, we got VPN up a running (the trick was to create a second, local IP address for the ethernet port), but this also required us to turn on the server's DNS to create a split-brained DNS server.
    Everything was working swimmingly... and then we had a hard drive crash. Since we were thinking about moving the server onsite anyway (our POS system was accessed through the VPN, but it could be slow and made our tasting room dependent on Internet access in order to run the POS), we ordered Comcast business class internet with a fixed IP address.
    We updated the external public DNS to the new public fixed ip. Rather than plug the mini directly to the Comcast router (which is in pass-through mode), we elected to put a AirPort Extreme in front of it, mainly so we could get all of the POS computers on the same local network without using the mini as a DHCP/NAT router. We created a DHCP reservation on the Extreme so that the mini had a fixed local IP address. We port forwarded everything we wanted to expose to the Internet. Email started to work again. However, web services and VPN are nada.
    This being Snow Leopard Server and having spent literally hours debugging DNS issues when we first got the server, I knew it wouldn't be straightforward. And it hasn't been. Even changing the IP address of the server has been a chore.
    We ran "sudo changeip <old IP address> <new IP address>".
    Then we ran "sudo changeip -checkhostname" and received:
    "$ sudo changeip -checkhostname
    Primary address     = 10.0.8.2 <new static internal IP address>
    Current HostName    = <servername>.<domainname>.com
    The DNS hostname is not available, please repair DNS and re-run this tool.
    dirserv:success = "success""
    Oh no, the black pit of death.
    Even though I tried to modify the machine record in the local DNS to reflect the new internal static IP address, Nada.
    So, looking back on my previous research from Mr Hoffman and others, I stopped the DNS service, and I deleted the primary zone and reverse lookups in order to rebuild them from scratch. Except that no matter what I do, I can't delete the primary zone - it comes back like Dracula (even though the reverse zone and all of the zone records are gone). I tried rebuilding everything using the undeletable zone, but after a few services (saved each one separately), they would suddenly disappear.
    I am leery of messing with the DNS files on the server as I don't want to hose up Server Admin (my command line skills are rudimentary and slow). I have so much installed on the machine now that I am concerned about someone saying "reinstall".
    Help!
    Related to this is that it is not clear to me in web services which IP address you should use for the sites. The internal IP? The public IP? I thought Apache cared about the external IP address. And I think Apache is hosed at the moment due to my DNS troubles anyway.
    Thanks in advance!

    Morris Zwick wrote:
    And does anyone know which IP you enter for your sites in the web service? The public static IP or the internal private static IP?
    For the external DNS server I am sure you have already deduced that it should be the static IP issued you by Comcast and this will be forwarded by your router to your server.
    For your internal DNS server you could use either the internal LAN IP, or the external IP although the later might be affected by your firewall so this you will need to test.
    For the Web Server service in Server admin, if your only running a single website you could avoid the issue by just using the wildcard entry which will respond to any IP address, so this would be an empty host name and an IP address of *
    In fact you don't have to specify an IP address you could just use the hostname, so it will listen to traffic arriving at your server addressed to any IP address and as long as the URL that was requested includes the hostname you define for the site it will get responded to. So if as an example you have two websites you want to serve
    www.example.com
    site2.example.com
    then as long as both have the IP address for the site as an * (asterisk) then both should work as separate sites for traffic addressed to either the LAN or WAN IP address of the server.
    You will still need to use two IP addresses on the server to enable VPN, you could use a USB Ethernet adapter for the second one. Port forwarding for VPN is not as simple as other traffic as VPN requires traffic different to the standard IP and UDP packets. Routers that support 'VPN Passthrough' are specifically designed to accomodate this but I don't know if the AirPort Extreme does this. I have also found PPTP copes better with this sort of setup than L2TP although PPTP is generally regarded as less secure.

  • Second Task Server not appearing in the Manager

    I have set up a second Collection and Task Server (W2003 SP2) on a VM. The Collection Server is running fine.
    The Task Server does not appear in the Manager displayer, after refreshes (F5) and rebooting both the Manager and the new Collection/Task Server.
    Following some of the suggestions on this forum, he is my troubleshooting:
    1. I have a local account "ZAMadmin" on both servers that is a local admin account with full rights to the Filestore
    2. Only the TASKSERVER.exe is running; TASKSERVERCORE.exe is not
    3. I have uninstalled/reinstalled the Task Server.
    4. Port 7465 is NOT open when a TELNET 127.0.0.1 7465 (connect failed)
    Any ideas what to check?

    Originally Posted by pcwoodring
    I have set up a second Collection and Task Server (W2003 SP2) on a VM. The Collection Server is running fine.
    The Task Server does not appear in the Manager displayer, after refreshes (F5) and rebooting both the Manager and the new Collection/Task Server.
    Following some of the suggestions on this forum, he is my troubleshooting:
    1. I have a local account "ZAMadmin" on both servers that is a local admin account with full rights to the Filestore
    2. Only the TASKSERVER.exe is running; TASKSERVERCORE.exe is not
    3. I have uninstalled/reinstalled the Task Server.
    4. Port 7465 is NOT open when a TELNET 127.0.0.1 7465 (connect failed)
    Any ideas what to check?
    I entered a ticket with Novell Support $, and the issue revolved around installing the Collection Server, then installing the Task Server later on. I guess the "Component Install" isn't entirely true!
    Here is the scenario for anyone else with this problem:
    1. Second Collection Server installs and it grabs new DLLs for the Primary
    2. Task Server installs but can't start because of DLL conflict
    3. Reinstalling the Task Server does not overwrite the DLL, so the same problem
    The fix is stupid and simple:
    Install the Task Server to a new folder. Then it can install all of the DLLs including the shared programs
    I hope this helps someone else avoid misery!

  • Communication between the primary server the gateway server

    hallo
    Can I set the directional communication between the primary server the gateway server, so it feels by the following example?
    And if so how?
    Agent
    à GW
    ß GW
    ß MS
    *Agent communicates with GW1 and reported it
    *GW SEND report to GW2
    *GW2 Send the the data to MS
    thanks
    <o:p></o:p>
    אם תגובתי פתרה את בעייתך - לחץ/י, על &quot;סמן כתשובה&quot; ליד סימן ה V הירוק.

    Hi,
    As far as I know, Gateways dont talk to each other. Why you need two GW, with one GW and report to your management servers, this way should work.
    Here is a similar thread for your reference:
    https://social.technet.microsoft.com/Forums/systemcenter/en-US/323d5aab-bad4-4c23-b096-27a62757ae31/communications-between-2-gateway-servers-and-2-ms?forum=operationsmanagerdeployment
    Regards,
    Yan Li
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

  • There was a problem connecting to the server...please check the share name..every 3 seconds.  made computer useless

    there was a problem connecting to the server...please check the share name..every 3 seconds.  made computer useless. Lion.  It only complains about one of my PCs that usually shares OK with the imac.

    First, restart the Time Capsule by disconnecting the power adapter and reconnecting it. If other devices on the network can see it, you can skip this step.
    From the menu bar, select
     ▹ System Preferences ▹ Network
    Click the lock icon in the lower left corner of the window and authenticate to unlock the settings, if necessary. Click the Advanced button, then select the TCP/IP tab in the sheet that drops down. Click Renew DHCP lease.
    Try again to back up.
    If you still can't, open the Time Machine preference pane and delete the TC from the list of backup destinations. You may have to unlock the settings by clicking the lock icon in order to do this. Then add it back.

  • How to transfer database table contain null values, primary key, and foreign key to the another database in same server. using INSERT method.

    how to transfer database table contain null values, primary key, and foreign key to the another database in same server. using INSERT method.  thanks

    INSERT targetdb.dbo.tbl (col1, col2, col3, ...)
       SELECT col1, col2, col3, ...
       FROM   sourcedb.dbo.tbl
    Or what is your question really about? Since you talke about foreign keys etc, I suspect that you want to transfer the entire table definition, but you cannot do that with an INSERT statement.
    Erland Sommarskog, SQL Server MVP, [email protected]

  • Primary Server went down going to get a fresh object elsewhere in the clust

    C:\>java -cp c:/oc4j_extended/j2ee/home/oc4j.jar;c:/how-to-ejb-clustering/lib/st
    ackClient.jar cluster.client.ClusterClient
    [One]
    [One, Two]
    [One, Two, Three]
    Kill current server and press Enter to continue.
    Primary Server went down going to get a fresh object elsewhere in the cluster
    Exception in thread "main" com.evermind.server.rmi.RMIConnectionException: Serve
    r shutdown
    at com.evermind.server.rmi.RemoteInvocationHandler.invoke(RemoteInvocati
    onHandler.java:50)
    at com.evermind.server.rmi.RecoverableRemoteInvocationHandler.invoke(Rec
    overableRemoteInvocationHandler.java:22)
    at com.evermind.server.ejb.StatefulSessionRemoteInvocationHandler.invoke
    (StatefulSessionRemoteInvocationHandler.java:40)
    at __Proxy2.push(Unknown Source)
    at cluster.client.ClusterClient.main(ClusterClient.java:45)

    Upss,i forgot to inform :
    i have my BC4J deployed ( +- 10 Entity objects/View objects ) , 1 Application Module
    i also developed java client to access this BC4J component,and calculate the average process time.
    Thanks
    Regards,
    Ricky HP

  • Client version is different on the primary server and workstations

    Hi Guys,
    I have a quick question.
    What is the impact if the client version on the workstations are higher than the primary site version?
    In our environment, some of the machines client got updated to 5.00.7804.1300. But our primary site server version is 5.00.7804.1000.
    Thanks in advance.

    Well, if the same major version, being SP1 or R2, then generally OK. However, between major versions, you are not supported having a higher client version (for example R2) reporting to a lower version (for example SP1).
    Even within a site, with the same higher version, there should be no way to get clients installed at a higher CU than the site server. Of course, if the site server is a client, then it could be R2 CU1, and other clients being R2 CU2. But R2 CU2 would still
    be installed on the site server, maybe just not the client on the site server.
    And I believe as of CU2 of R2, they are not updating the Help About version to reflect CU release so that will help.
    Wally Mead

Maybe you are looking for