Second replacement 3G (3.1.3) Still got camera problems.

I was having problems with the photos on my replacement 3G,(3.1.3) they were very blurred. Took it back & they replaced it again however i find the same problem again. Photos on camera-roll are ok, not blurred, but if i email myself a photo from camera-roll then drag it into iPhot it's VERY blurred.
However, once i plug in iPhone to sync in iTunes the photos are still blurred until i put them in one of my folders(Mo & family) then they are fine & can be emailed with no blurring at all?
My son found this http://discussions.apple.com/thread.jspa?threadID=1802430&start=0&tstart=0
but this was way back in 2008-2009 only difference is the photos in my camera-roll are NOT blurred like the people on that discussion! I'm finding it very confusing & strange...
Anyone got any idea as to what's going on please?
For now i just wont be sending any photos from my iPhone...will send from iPhoto

Photos sent via email or MMS from the iPhone are sent at a lower resolution/size.
With firmware update 4.0, there is a size option provided for a photo or photos to be sent via email - small, medium, large, full or original size.
If you are using the Share function with a selected photo or photos to be emailed, try using the copy function for the selected photo or photos instead followed by pasting the copied photos in the email. When using copy/paste for the photos instead of the share function, the photo or photos will be sent as full resolution.

Similar Messages

  • TS3367 I already try these steps but I still got the problem I can't make a video call at all or receive .

    I already try these steps but I still got the problem I can't make a video call at all or receive .

    Here som other steps you can try;
    Make sure that you have an internet connection
    Make sure that you have a valid Apple ID (check here: myinfo.apple.com). Note that your Apple ID  to register FaceTime on iPad 2, iPod touch, or FaceTime for Mac must be an email address. You can create a new Apple ID or make changes by visiting myinfo.apple.com and using the “Manage your Account” part.
    Tap Settings > FaceTime to see that your email address is verified. If your status is saying “verifying,”; then try toggling FaceTime off and on (Settings > FaceTime OR FaceTime for Mac: FaceTime > Preferences)
    Try turning FaceTime off and on again using the following (iOS: Settings > Phone OR FaceTime for Mac: FaceTime > Preferences)
    Make sure that FaceTime is enabled (Settings > FaceTime.)
    Make sure that the camera for FaceTime is not restricted (Settings > General > Restrictions.)
    Tap Settings > General > Date & Time to check date and time are set correctly.
    Make sure that you are using the correct method for calling the person. iPhone user: Use the phone number; iPad 2, iPod touch, or FaceTime for Mac user: Use the email address

  • Null statistics for tables but still got optimizer problem

    Hi,
    We got a batch application on 10.2.0.4 Oracle database that does a lot of deletes and inserts when run it. Nightly statistics gathering was not enough so I deleted and locked the statistics for all tables. Now it has null statistics so it supposes to use dynamic sampling instead of statistics. At beginning the query executions were ok, however after the application ran for a well, it still chosen a very bad query execution plan (with cost over ten times more that it was normal).
    What is happening here? Null statistics is still not good enough for the highly volatile database? Is there anything else I can do?
    Thanks in advance.

    Provide information like the structure of your table (including indexes), your compartibilty and optimizer settings, your SQL Statement and sample explain plan of the SQL.

  • Still got boot problems.

    I got my new PSU today, and I hoped that my problems schould be solved then. But I had wrong. My system can't boot. But I've discovered that if I just use one memory module the system can boot. But if I use both, it can't boot. I know that the modules are working because i've tested them in another system. Do someone know if there is anything I can do. If not, i'm going to ship back the mainboard and hopefully get a new one.
    Best regards
    Henke

    try 2 things, first are your 2 sticks when there in single or dual channel, try both.
    second, run http://memtest86.com one 1 stick at a time for say 12 hours each and see if either one gives an error or 2 ( or maybe loads ), if one stick does but the other don't than you got a faulty ram stick, I know you said they work in an other system but your settings might be tighter in this system which would show up any marginal faults, let us know.
    Babyface uk

  • Still got update problems -please help

    Ok every time I try to update it gives error code 3259. I have reinstalled itunes 8.2, I have tried turning off firewall and antivirus - no change. It says the internet connection timed out - what else can I do???? Getting very frustrated please help.
    Cheers

    managed to turn spyware off and that allowed update to donload.

  • Windows 8.1 Installation On Mac - Got a Problem

    Windows 8.1 Installation On Mac - Got a Problem
    Hi everyone,
    I'v researched a lot about installing Win on Mac but I still got a problem when everything seems to be fine.
    I got a Macbook Pro Retina, Late 2013 with OSX Mavericks and Bootcamp 5 installed on. And for installing windows, I already got an empty 8GB USB Drive formatted as MS-DOS (FAT32). And I've prepared Windows 8.1 ISO in my Downloads folder.
    During my last effort, I opened Bootcamp Assist and then Chose the options: "Create Windows 7 or later version installation disk" and "Download the latest windows support software from Apple". Then I chose my Windows 8.1 ISO location and my destination. When it finished ,I was expecting it to run windows setup. But it closed and nothing happened
    When I opened BootCamp again, only the first two options were available as before and "Install or remove Windows 7 or later" wasn't.
    Now ,what do I have to do exactly? (NOTE: I'm not a professional. So please answer in a simple way. )
    Should I restart the Mac and Hold OPTION while booting to run Windows setup? I was thinking about it but I thought I might screw it up all. So I decided to ask it here to be sure.
    Any help will be appreciated by heart!

    Hi Alcatrax,
    I would recommend following the steps in this link in order to help you complete your installation of Boot Camp:
    Boot Camp Help: Install Windows on your Mac
    https://help.apple.com/bootcamp/mac/5.0/help/#apdecf0e4b6-b472-438d-881e-57c230b 1c250
    Prepare your Mac for Windows
    Boot Camp Assistant helps prepare your Mac for Windows by creating a new partition for Windows and then starting the Windows installer. Optionally, you can install Windows using an external USB drive that contains a Windows ISO image downloaded from Microsoft and Windows support software.
    Important: If you’re using a portable computer, connect the power adapter before continuing.
    Insert an external drive into the USB port on your Mac and keep it inserted while you install Windows and Windows support software.
    Open Boot Camp Assistant, located in the Other folder in Launchpad.
    Select the option to install Windows, select other options you need, then click Continue.
    Here are the other options you can choose:
    If you want to install Windows from an external USB drive and you have a Windows ISO image, select the option to copy the image to an external USB drive. If this option isn’t available, your Mac doesn’t support installing Windows from an external USB drive.
    If you haven’t already downloaded the Windows support software for your Mac, select the option to download it. In a later step, you’ll install the Windows support software on your Windows partition.
    Follow the onscreen instructions for the options you selected.
    When you’re asked to create a Windows partition, specify a partition size. If you have multiple hard drives in your computer, you can select a different hard drive and create a single partition on that drive, so that the drive is solely used for Windows.
    Note: You can’t resize the partition later.
    If you need help determining the best size for your Windows partition, refer to your Windows installer documentation. For Windows 8, create a partition that is at least 30 GB.
    In a later step, you’ll format the Windows partition.
    If you are using an installation disc for the 64-bit version of Windows, insert it into the optical drive in your Mac or the external optical drive. Otherwise, keep the external USB drive with the 64-bit version of Windows inserted.
    Click Install.
    Boot Camp Assistant creates the Windows partition, restarts your Mac, then opens the Windows installer.
    Thanks for being a part of the Apple Support Communities!
    Regards,
    Braden

  • I purchased AppleCare if I replaced my screen do I still have it?

    I got my iPad 4 about 3 months ago from school I've been having a lot of problems with it overheating to the point it makes my palms sweaty and my son would complain that it was hot  and it freezes all the time on me while I'm doing home work or school work i called apple customer service they sent me to the apple store then they just updated it and restarted it went home and my iPad was still the same the next day I called again because it was still overheating another person just restarted it and said it was normal but I don't think it's normal so he told me to buy the apple are plan it covers technical problems which is $85.00 it does not cover cracked screens water damage just technical the next day my books must have broken the screen or the heat and all the heavy books did I spoke to my school Dan since I got it through the school he said he couldn't do anything about it to take it to a store down the block and they fixed it for $150 I took it there because AppleCare does not replace cracked screens and the closes store is 1 1/2 away from where I live they fixed it brand new but the overheating and freezing keep going I called again and the lady said that she would tell them to give me another iPad under my warranty because I'm still in my warranty period  she gave me a case number and everything just have to go to the apple store I went in today they looked at it told me they were going to give me the iPad but then denied it because I replaced my screen he said I'm having this problem because I replaced the screen I told him I've been having this problem for a while now way before the screen cracked I told him I have AppleCare he said it doesn't matter I told him what if I call the apple store because I live far from here he said even if the apple customer service people say to give me a new one they won't because they already denied my service and I can't get my new iPad from there and that  the apple customer service representative can't go above what they say once again I'm back to square one with an overheating and freezing iPad and yes I've tried everything lowering the brightness shutting it off at night everything......I just want to know if I bought the AppleCare for technical problems and my screen cracked and I replace it myself do I still have it?

    I understand the whole warranty thing but I do have the hardware repair coverage from them since I've been having these problems and bought that before the screen cracked I read my warranty it doesn't say anything about what I'm asking that's why I asked because I know I don't have the warranty anymore I'm asking about the hardware repair coverage.........and I'm not trying to argue with you kappy I'm just stressed out with all this ok

  • I just got my replacement ipad last night. when i got home and tried the applications, there is no sound. but the videos do have sounds.

    i just got my replacement ipad last night. when i got home and tried the applications, there is no sound. but the videos do have sounds. i already checked the settings. i cannot find what's causing it. please help.

    You may have already checked the settings, but it still sounds like you have system sounds muted.
    If you lose sounds for keyboard clicks, games or other apps, email notifications and other notifications, system sounds may have been muted.
    System sounds can be muted and controlled two different ways. The screen lock rotation can be controlled in the same manner as well.
    Settings>General>Use Side Switch to: Mute System sounds. If this option is selected, the switch on the side of the iPad above the volume rocker will mute system sounds.
    If you choose Lock Screen Rotation, then the switch locks the screen. If the screen is locked, you will see a lock icon in the upper right corner next to the battery indicator gauge.
    If you have the side switch set to lock screen rotation then the system sound control is in the task bar. Double tap the home button and in the task bar at the bottom, swipe all the way to the right. The speaker icon is all the way to the left. Tap on it and system sounds will return.
    If you have the side switch set to mute system sounds, then the screen lock rotation can be accessed via the task bar in the same manner as described above.
    This support article from Apple explains how the side switch works.
    http://support.apple.com/kb/HT4085

  • Iphone 5 keeps cutting out when still got charge init

    CCan somebody help me my iPhone 5 keeps cutting out when still got charge left in it it is two years old also lose signal a lot help please

    Depending on the age of the phone and its usage, this could be battery issue and your battery might have to be replaced. If the phone is still charging with your fathers USB cable, make sure it is charged for at least 15min, then try to connect in recovery mode, explained here:
    iOS: Unable to update or restore
    If this does not work, you'll have to get it checked out by visiting an Apple Store or Authorized Apple Service Provider next to your place or by contacting Apple directly: Apple - Support - Service Answer Center

  • Help: Still got problems with package

    I still got problems with my self-defined packages. My source files are all put in a directory as the package
    name suggests. The questions are:
    1. Before the classes in the package can be cited by the outside programmes, should I compile
    every sources files in the package respectively?
    2. Secondly, I want to put the .class files in another directory, such as \classes\package name, should
    I set the path mannully? If yes, how to do it?
    3. I downloaded some *.java files from Internet and put them in a directory as their package name suggested.
    However, when I run javac a.java I got error: cannot read a.java. What problem could it be?
    Thanks!

    1. Before the classes in the package can be cited by the outside programmes, should I compile
    every sources files in the package respectively?Yes, you can't run .java files. The JVM only uses the .class files, so you have to compile them.
    2. Secondly, I want to put the .class files in another directory, such as \classes\package name, should
    I set the path mannully? If yes, how to do it?You have to put the .class file in the package directory structure. You have no choice about that.
    3. I downloaded some *.java files from Internet and put them in a directory as their package name
    suggested. You need to read a lot of stuff, but start with this:
    http://java.sun.com/j2se/1.4.2/docs/tooldocs/windows/classpath.html
    However, when I run javac a.java I got error: cannot read a.java. What problem could it
    be?You don't run .java files. You run .class files.

  • 2nd replacement is broken - is it still covered?

    Hi all,
    My second replacement iPod now shows the unhappy iPod icon after freezing on a song and being reset, so I think it needs a replacement. Its not quite been a year since I recieved the replacement (23rd Sept 2005), but its been over a year since my original purchase. Does this mean my year warranty is out of date or still covered? If I do have to pay for a service, how much is it likely to be?
    Is there any recommendations for solving the problem without having to send it off?
    iPod Photo 40Gb   Windows XP  

    There's a post here about the sad iPod icon.
    http://discussions.apple.com/message.jspa?messageID=2369954#2369954
    The warranty on replacements is for 90 days or the remainder of the original warranty whichever is the longest.
    Apple's out of warranty service charge is $249.
    Yes, you read that right. : )
    There are other options like iPodResQ.com

  • No sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem.

    no sound while watching you tube videos on my ipad. This is my second replacement ipad with same problem. No sounds coming out from the speakers, even after reset everything. Mute button is assigned for mute function instead of screen rotation lock.

    Hi herbie13!
    It sounds like you will still want to link your iPad and computer, but you want to prevent the iPad from syncing information from your computer to your iPad. I have an article here for you that can help tell you how to set this up:
    iOS: Syncing with iTunes
    http://support.apple.com/kb/ht1386
    You will want to follow the steps here to set up the iPad for syncing, but when it comes time to sync, you'll just want to make sure that the boxes for syncing the multitude of items that you can sync remain unchecked so that none of that information gets synced into the iPad.
    Another note: your second Apple ID will not be able to access the apps, music, movies, tv shows, etc., that you have purchased under your primary Apple ID. Even though it seems that the secondary Apple ID still has access to those items, that is just because you are viewing your second Apple ID through the iTunes Store section on your computer and you have those items saved locally on your computer. You will need to repurchase and download all of the content that you wish to use again on your second Apple ID, if that is what you wish to solely use on this iPad.
    Take care, and thanks for visiting the Apple Support Communities.
    -Braden

  • Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate...

    Numbers does not open with the main user after installing mountain lion. It works flawlessly when I use the second account on my mac. What got corrupted in the admin-account, something in the user-library? How can I fix it? I´m kinda desperate... (the same happens with the other iWork-Apps!)
    Looking forward to hearing from somebody with a littlemore expertise than me, Chris

    you can remove preferences files by navigating to the Preferences folder for your user as follows:
    0) Quit ALL iWork apps (Keynote, Pages and Numbers)
    1) from the Finder select the menu item "Go > Go To Folder…".  This will bring up a dialog:
    2) enter the path "~/Library/Preferences" (no double quotes)
    3) find the files:
    com.apple.iWork.Keynote.plist
    com.apple.iWork.Numbers.plist
    com.apple.iWork.Pages.plist
    and move these to the trash.  I would NOT empty until later.
    4) restart Numbers

  • Ipad mini retina since update to ios8.2 cannont update or install any appscircle just keeps spinning round also updated today to ios8.1 still not sorted problem out done hard reset several times no joy any body else got same issue

    ipad mini cant update any apps or install new ones since updated to ios8.02 and now today updated to ios8.1 still cant update apps the circle just keeps spinning round, i have done a hard reset etc no joy, anybody else got same problem.

    VPN-User,
    Ok - I see the list of issues and will ensure our X300 specialist takes a look at it.   
    Please do understand that while you have put together a very coherent list, I try to ensure priority to threads in which multiple customers are focused on a single issue, as we deliver the most benefit to the community in working on those.   This forum is primarly a peer to peer discussion forum rather than a Lenovo chat / tech support where we try to solve each and every issue put forth.
    Individuals with a long list of issues on a particular machine may find benefit from either contacting technical support and working through their list, or publishing it as you have done and wait for other users of the same system to share their experiences.
    Thanks for your patience
    Mark
    ThinkPads: S30, T43, X60t, X1, W700ds, IdeaPad Y710, IdeaCentre: A300, IdeaPad K1
    Mark Hopkins
    Program Manager, Lenovo Social Media (Services)
    twitter @lenovoforums
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • I have recently got a new replacement iPhone 4.  since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table.  How an I find out what is causing this and stop it happening

    I have recently got a new replacement iPhone 4.  Since I got this I have found that my data allowance is getting used up during the night while my phone is charging on the bedside table.  How an I find out what is causing this and stop it happening?  Some nights the usage is 150 meg!

    You can not access the backup directly.
    Did you restore your replacement from this backup?
    If so then you already have everything in the backup on your device.
    If not, you can wipe the device and restore from this backup:
    Settings > General > Reset > Erase All Content & Settings
    What is it you are worried about losing that isn't already on your current device?

Maybe you are looking for