Second screen mbair 2014

I´m looking for a monitor for my macbook air, could´t afford price of mac or Dell IPS. Is Samsung a good option?

Samsung is not bad. Note, display options may vary depending on what version of MacBook Air you have. Go to the System Profiler and look for the numbers after MacBook Air in the machine ID. It would say something like MacBook Air 3,1.

Similar Messages

Drop-down menu not working on palettes when on second screen.

Running OS X 10.10.2 on a Macbook Pro with a second screen. The applications are displayed on a large 24 inch monitor and palettes are on the built-in laptop screen. Often, but not always, the drop-down menu on the palettes will not work when on the built-in screen. If the palette is dragged to the larger monitor it works fine. Sometimes it works appropriately and there is no telling when it will work or not work. When you click on the drop-drown icon it highlights but no menu appears. The happens with CC 2014 Illustrator, InDesign and Photoshop.

The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

IMac 27" mid-2010 as a second screen

Hi,
I recently got a MacBook Pro Retina 13" (2015) and I would like to use my iMac 27" (mid-2010) as a second screen.
I already tried it by using a HDMI to Mini DisplayPort cable but it didn't work.
So I've checked on the Internet and as stated in this forum thread (Macbook pro 2014 connect to imac 27 2010), I need to use a Mini DisplayPort to Mini DisplayPort cable and since the Thunderbolt port on my MacBook Pro should handle it.
So I hope someone can confirm me this solution will work.
Thank you by advance.

It's correct.
iMac- How to use your iMac as a Target Display Mode display
Target Display Mode 2009 & 2010 iMacs

I have two screen on my PC. Adobe always opens on the second screen. I would like to change this. Ho

I have two screens on my PC Adobe always opens on the second screen. How do I change this to open on the first screen.

It should (should) stay where you close it from, especially if you have it maximized on that monitor. I can't guarantee that because I'm having the same problem with Firefox this morning. I always open it on my secondary montior, and today it will only open on the primary.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

I was told of an application that will allow the use of a second screen to view my data and files, but I forgot its name. I'd like to make the connection because my LCD is broken.

You don't need an application, just plug a compaitble monitor into the display port of your MacBook Pro, set the screen up in System Preferences>Displays

Adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?

adobe reader xi i am running 2 display screens and when i have a file open and go to print the print page opens on my second screen. How can I get adobe reader to just display on one screen?
I want the capability of adobe reader to just run on one screen.

I had the same problem.
Try this.
https://igppwiki.ucsd.edu/groups/publichelpwiki/wiki/a1538/Howto_Disable_Acrobat _as_the_Safari_PDF_Viewer.html

How do I use my iPad as a second screen with my macbook pro?

I've got splashtop streamer for my ipad. In school my computer teacher has two monitors and she is able to drag stuff from one screen to the other. If i was streaming to my ipad, how could i use it as a second screen? and how could I do this with any old monitor?
BTW if you dont know splashtop streamer, it is a software that lets you stream content from a computer or laptop to a wireless device, such as an iPad.

Splashtop only has the ability to mirror your Mac's single screen. It does not let your iPad work as a second screen.
You need an app that is designed to turn your iPad into a real second monitor.
I use Air Display to move all of my pallets to one screen when I am working with my graphics programs on my Mac. I keep my iPad connected to my iMac to keep it charged while I am using my iPad in this manner.

My HP Touchsmart 610 screen is blank when I switch it on. only less that a second screen flash.

when I turn on my computer hp touchsmart 610 desktop the screen has only less than a second flash and then it's blank and I can't see anything. I used some instructions like pushing f10 key for 5 seconds and reseting the bios and blo blo but it won't work. I also removed cd or usb but it still not working. plesae somebody help.

Hi Fanoos,
Although this post is a couple years old, I figured I would give it a reply anyway just so other people with similar issues have a little more up to date info.
AugyTek is actually the name of my repair shop, and this is a "fun" problem that I see all the time.
Regarding specifically the Touchsmart 610 system, when you see the flash like that, there is an easy way to tell exactly where the problem is originating from.
First, check your power supply "brick". It should be warm to the touch with it plugged in and machine running. If it feels like it is going to burn your hand, your PS is probably the culprit. I recommend taking it to your local technical shop, or using a voltmeter if you have one to see exactly what it is putting out. It should be 19v give or take a couple tenths of a volt. Anything more than a couple of tenths off and your power supply is probably the culprit, and may have done some additional damage to the PC itself.
If everything is good there, now it's time to assess internally. Power off the machine, disconnect the power supply, hold the power button in for a couple of seconds until the green light on the back is no longer lit. Follow the instructions on the HP website to removing both the left and right covers on the back of the PC. (Take proper precautions for static electricity.)
Take out the Hard Drive and the RAM. replace the covers, but no need to screw them in. Plug your power supply back in and power the machine on.
You should get one short and one long beep and nothing should display on the screen. This is testing for proof of life from the board. If you get no beeps, your board is malfunctioning and sadly with these it often is easier and cost effective to just get a new machine than replace the board.
If you get beeps, the board is fine and you need to replace one stick of ram after powering off properly again and then start it up. You should be able to see the "no boot media" message it displays because the system will halt.
If the lettering is fuzzy, diminished, in a low resolution, or looks anything other than normal, the likely cause is video related. You now have to determine to what extent the video is malfunctioning.
(Yes, I know that you probably arrived at this conclusion already that the something was messed in the video/display area, but I can't tell you how many times I have asked people if they have tested for other things and they say no or how do you do that? By ruling out other malfunctions, you arrive with the correct solution faster.)
You can power the machine down and remove the back covers and carefully reseat ALL micro style cables that you can see. There should be 3 in the top left, 2 on the inverter (the thing with the cover), and then 4 in the top right that are kind of hard to manage. These cables are all related to power, with some related to video and the touchscreen itself.
So now boot the system up normally, if you still have the one second screen, then attempt to plug in USB devices, insert a CD/DVD, and if you have one handy, use a USB to VGA adapter. If any of these things do not initalize/work properly with the typical windows sound when you plug them in, the likely cause is your motherboard, related to power issues.
If your board is not able to route enough power through it past the graphical chip, into the inverter, and the LCD, power USB devices, etc., this is a tell tale sign that your machine has issues supplying enough power to all these things. This is why you will see the one second screen everytime you turn the screen on or wake it out of standby, because there isn't enough or consistent power to keep the system running normally.
Because it is fairly cost prohibitive and time consuming to replace the board, you can pretty much write off the system.
Now if your USB devices and Optical drive work fine and everything initializes, you may be able to get away with replacing the inverter. These parts do go bad, and the inverter, which sits on top of the optical drive in the system is naturally exposed to heat from the DVD drive and is a really bad design flaw. Replacing this may solve your problem.
If it is replaced and you still have the same issue, likely your problem is with the LCD screen itself, and again... not really worth it to replace it.
If it is your board and power issues, if you are hell bent on repairing this, and you are familiar with how to reflow a board, or know a professional that can attempt it, you certainly can give it a whirl. DO NOT attempt the unprofessional ways to reflow a board as you see on some videos. Whereas these methods can work, you need to have an intricate knowledge of electronics and temperature effects on circutry to even warrant attempting them.
Some people say a hair dryer will work, but the problem is then you dont know exactly how much heat you are at temperature wise, and a hair dryer will auto cool and heat it's coils as it sees fit to maintain it's own stability, where as a genuine heat gun will not. Again, if you don't have experienced knowlege in reflowing boards, I wouldn't recommend doing it.
By reflow, I am referring to reflowing the solder in the board. Unless a visible malfunctioned blown or bulged capacitor is present, reflowing the solder to it's original paths is done by the way of keeping the board level, and gradually and evenly heating the board up to a temperature to where solder melts. Solder will naturally go back into it's original form at a certain temperature and reseal any cracks or breaks in the solder, thereby repairing the flow of electricity for that certain component. This is also assuming the component that has the solder is not damaged as well.
This process is best left to professionals with proper equipment, because you can in fact to irrepariable damage to the board if you are inexperienced. Being careful will not save you in this instance.
The one thing you want to remember with All in ones, and especially touch screens, is that they generate an AMAZING amount of heat. Any blockage from dust or covered vent ports can quickly lead to your machines demise. Due to the design of any All in one, heat has been, and probably always will be an issue with these units.

I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers. I want a second display.

I want to use my apple TV as a second monitor not a mirrored one, in other words, I want to use my TV as a second screen not a copy of my first screen,other people have asked this question but have been given mirroring answers so I am spelling it out here very specifically. I want a second display. This should be possible and would be awesome. Anyone know how to do this?

Nevermind I just installed it to try it and it's awesome, so happy right now, Thanks. All the things I had read about it on third party sites led me to believe it could not do extended desk tops, thanks for your help!

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

How can I set up Cinema Display as a main screen and leave my macbook pro as a second screen instead?

I learned that the Dock is positioned at the chosen edge of whatever Display is positioned farthest to that side. E.g. for the Dock to be positioned on the right side of the Cinema Display (instead of the right side of the MacBook), the Cinema Display must be oriented (by dragging) to the right of the MacBook monitor on the "Arrangement" tab of the Displays Preference Panel.

Using Apple TV as second screen for Windows7.0

Hello All,
Is there any way to use Apple TV as a second screen for my Window 7.0 system. Currently trying to use as below:
- Apple TV as the second screen/extended for the my desktop PC based on Windows 7.0 which will allow me to see the screen on the Apple TV.

Welcome to the Apple community.
Unfortunately, that is not possible.

How to raise an information message in Sales order change second screen(pbo

Hi Experts,
I need to change data in Sales order header if user entered wrong value while creation of order. If he has not given the correct value then i need to raise one information message on second screen of VA02. How can it possible when enter PRESS button or any action(means in the second screen pbo only).
Cheers,
Bujji

Hi,
Which field do you want to validate??
Thanks,
Naren

Can I add a second screen to my 09 iMac?

can I add a second screen to my 09 iMac?

Welcome to Apple Support Communities
Of course. Just get a monitor and the Mini DisplayPort adapter you need to connect the Mac to the monitor. I recommend you to use HDMI if the monitor uses it. Also, you can connect it to a TV. See > http://support.apple.com/kb/HT4241

In FCPX 10.1 and 10.2, I set FCPX on desktop 2. When i go back to desktop 1 for any reason, my second screen viewer leaves desktop 2 and travels to desktop 1

I use two desktops in OS-X. One is for FCPX (desktop 2) and one is for default things, browser, email etc.
I have two screens, and my second screen is my viewer. When I am in FCPX, all is fine, viewer is on screen 2 as it should be but if I flip over to desktop 1, the second screen travels with me and then does not return when i go back to FCPX.. so then I have to three finger swipe up and move the screen back, and it sticks there 1 in 5 tries, if that. I have removed preferences, reset, all the normal obvious things. I am 99.9% sure this is a bug as I can replicate it time and time again.

I found this as I am too experiencing the exact same issue. When I restart the synced databases are gone, corrupt and incomplete.
How did you resolve this ?
10.9.3
FCPX 10.1.1
Syn n Link X 1.0.18
I need help this ***.
-Robert

IMac 21,5 2010 3,06GHz Second screen no max resolution

Hi there,
I have an iMac 21,5 3,06Ghz 2010-model. And an LG Flatron w2261VP. I want to connect this LG to my iMac, but when i do it gives a max res. of 1600x1200. This is not the native res. for this screen, the native one is 1920x1080. But when i select the 1600x1200 the screen goes black and says "out of range". However, when i connect the LG screen to my MacBook Pro 13" 2010 the screen automatically uses the 1920x1080 resolution and works flawlessly.. The resolutions i can select on my imac for my LG are: 640x480, 800x600, 1012x768, 1152x870, 1280x768, 1280x960, 1280x1024, 1344x1008, 1400x1050 and 1600x1200
I'm currently using the 1400x1050, can't select the higher one; screen goes "out of range"
I use a mini-displayport to VGA adapter.
My question is: Is it even possible to use a second screen with my iMac? Why does it work with my MacBook Pro and not with my iMac? Is it a bug? Do i need a DVI of HDMI? Anyone else suffering this problem?
Your help is very much appreciated!

Are both in Extended Desktop Mode?
Other than that, check out the following threads.
http://discussions.apple.com/thread.jspa?messageID=10960796&#10960796
http://discussions.apple.com/thread.jspa?messageID=11784734&#11784734
http://discussions.apple.com/thread.jspa?messageID=11723943&#11723943

Second screen mbair 2014

Similar Messages

Maybe you are looking for