Second site has the same URL as the first

Another plea for help! I have abandoned iWeb08 and reinstalled iWeb06. My main website works fine and is published to http://web.mac.com/brianswebsite. However, when I try to publish a second site, it goes to exactly the same place and overwrites my first site. How do I redirect the second site and prevent this happening please? If I can't resolve this issue, I will have to find another way of producing my second site for a local charity.

That's strange because all pages have the same value (top and bottom padding = 0px, width = 780px, height = 430px, header = 0px, Footer = 150px) but the are not the same length.
What is the maximum height you can put in?

Similar Messages

  • I am trying to install my HP desk jet 3050 and it only supports mac 10.6 and hp web site has the same software is there any way to install it in mac 10.6 mode

    i am trying to install my HP desk jet 3050 and it only supports mac 10.6 and hp web site has the same software is there any way to install it in mac 10.6 mode it works with lion but i need the software on my mac

    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01664444&cc=us&lc=en&dlc=en #N43
    Seems your printer is supported in Lion.

  • Playing a second swf when the first one's finished

    I have 2 swf files (the FLA's too) and want one to play then
    the second. - I'd add the second to the timeline of the first, but
    the second is a complete site and contains many referenced
    "gotoandplay" links which would all need changing. So....I really
    just need a way for the second swf to play after the first one's
    finished. I tried using the load external movie clip behaviour, but
    couldn't make it work. Can I use the first swf as a preloader
    without affecting the timeline on the main swf? I canspare a couple
    of frames at the start of the second movie for that, but don't know
    how to set it up - can anyone help?
    I also want the custom cursor to remain only in the first
    swf, and go back to default on the second.
    main (second) movie:
    http://mysticalbillyo.com
    first movie:
    http://mysticalbillyo.com/intro.swf

    I think you may want to create a 'master' loading swf, rather
    than loading the second movie into the first, and use the
    MovieClipLoader class to call and load new movies into the master
    container.
    Set up a new swf, that is the same size as the others. you'll
    set up a function on the first frame and then use that function to
    load all subsequent content into the master document. You can also
    use methods of the class to add things like preloaders and other
    event handlers. so for instance, at the last frame of the intro
    swf, you'd add a 'call' to the function in the master telling it to
    load the next movie in the sequence. I'll add the call you will
    need on the bottom of the code example below.
    PS. ------------------------------------
    I'm not one to solicit, however I have (awhile ago) developed
    a Component that you may be interested in for your site, although
    it has not been package and ready for distribution, it does
    function - called 'glitterMouse', and produces a twinkling mouse
    trail effect when you move the cursor, mush like the onRollOver
    animation that you'd painstakingly made (ouch) except that it use
    random twinkle generation at run-time, and has many property
    settings, like color, quantity, gravity, and so on. It might be a
    nice addition to your 'wand' cursor, and would not 'replace it' as
    it's not a 'cursor' but an effect generator.
    If you are interested, an example of it in action (although
    you can't purcahse it from there ... yet) can be seen on my site
    at: www.beechstudios.com goto the 'Flash' section, it's the first
    one listed.
    Just thought I'd throw that out there, sorry all, it just
    fits :]
    OK the code for you, add this to the first frame of the
    'master' swf, then add the code at the bottom to the end of the
    intro swf in the last frame.
    EDIT: this is AS2 code, to use AS3 code do something more
    like the methods as described above, yet I would still consider
    placing all content within a 'master' loading doc, and replaceing
    or removeing previously loaded children.

  • My iPhone 4S is dark, this is the second time.  The first time i was able to get it back on by plugging in into my PC.  However this time i have had it plugged in for an hour or so and nothing.  I have done the Start/sleep buttons

    My iPhone 4s is dark, this is the second time.  The first time I was able to get it back up and running by plugging it into my PC.  However this time it has been plugged in for an hour or more and nothing. There was still at least 70% charge left on it when it went dead.  I have pressed the sleep and start button separately and together.  It said that I did not have much space left this morning so I deleted Apps and photos but there was still space.  Just two days ago it was losing power even though it still 55% charge left so I plugged it in and it seemed to gain power.  Any suggestions on the problem?

    Sounds like faulty battery. Make Genius reservation and take to Apple for quick (minutes) free battery diagnostic testing. If you have Warranty or AppleCare the problem will be covered.

  • Cannot pick up calls on wait, Cannot make a second call holding the first call

    I have a really weird problem with my iPhone 5S. (iOS 7.1)
    1. When I am on a call, I am not able to pick up a second call that is on wait. I can see the second call, I can hear the beep sounds but as soon as I pick up, the call freezes in 00.00 time, and My first caller is still active, not on hold.
    2. When I am on a call, I am not able to make a second call placing the first call on hold. The second call disconnects immediately with 3 beeps.
    3. I am able to see the incoming calls on wait, when I am already on a call. I am able to hear the beeps coming in. SO it means the call waiting is on (Tried turning it on/off/on too.) But when I pick up the call, the above problem comes in.
    What have I tried to solve this: (None of them helped)
    1. I tried a hard reset of my iPhone (Holding Power and Home button)
    2. I tried toggling the Call waiting button
    3. I tried resetting network settings.
    4. I called my Operator for assistance. I am using Airtel, India. They told me to dial this code - *43# . I tried it and it gave me this screen. But the problem is not solved yet.
    Is there anybody here who is facing the same issue with your iPhone? I never had this problem with my iPhone 4.

    Make sure you do not have "Do Not Disturb" turned on. This feature will block the first call, but is someone calls right back it will be put through.
    On the iPhone, go to Settings/Do Not Disturb
    Make sure you do not have Do Not Disturb turned on manual or scheduled.

  • Open a second window from the first one

    Hi,
    The problem of my application is loosing control when I open the second window, so I know that the problem is the run of the sub VI but I don't find an other possibility to open a second window from the first one knowing that the first sends its vales to the second one. In an other way I want to open two windows simutaneously.
    NB: I attached  a simple verssion of my application.
    Can someone help me please.
    Attachments:
    The main VI.vi ‏21 KB
    The su b VI.vi ‏28 KB

    Hi Basile,
    why do you open a new thread again? Didn't the older one provide a solution?
    Best regards,
    GerdW
    CLAD, using 2009SP1 + LV2011SP1 + LV2014SP1 on WinXP+Win7+cRIO
    Kudos are welcome

  • My iTunes Match automatically charged me for a second year when the first year finished.  In spite of that, I have lost all of my playlists on my iPhone.  How can I get them back?

    My iTunes Match automatically charged me for a second year when the first year finished.  In spite of that, I have lost all of my playlists on my iPhone.  How can I get them back?

    Hi,
    No need to post three times!
    Is iTunes Match still turned on on your iPhone? If not, you need to turn it back on.
    If it is still on, go to settings, music app and turn off match- sign out of iTunes Store. Reboot iPhone, sign back into iTunes and turn on match. Poem music app. Does this help?
    jim

  • Quicktime movie only has the first song in the play list. after export

    when I export an album to quicktime the quicktime movie only has the first song in the play list.  The slide show works in i photo with all songs in the playlist but the quicktime only takes the first song and repeats it over and over

    I used the garage band method to string the songs together.   Then used the mega song to play with my album. and it even exported to the quicktime movie.  Thanks for the post.

  • I have Downloaded A Album by Rhianna and after 40 seconds of playing the first song it skips and goes onto the other song on the album , how do i fix this ?

    I have Downloaded A Album by Rhianna and after 40 seconds of playing the first song it skips and goes onto the other song on the album , how do i fix this ?

    Delete the song from your library and re-download it from the Purchases section of the iTunes Store.
    http://support.apple.com/kb/PH12491

  • Second site has a hyperlink in the Announcement, but not in Safari Navbar!

    Earlier I told you all that when I made a second site in my iWeb site, it did not show up when I tried to see it on Safari.
    Subsequent to that, I finished a bunch of tasks and was shown that message that pops up asking whether or not I want to send an Announcement. I clicked Yes, and an email message popped up. It was a generically formatted email saying The Website Is Ready For You To See and Here is the hyperlink.
    I noticed that there were TWO, not just one, hyperlinks. I noticed that in that announcement, the second hyperlink was for the second site that I created in iWeb but which never showed up in Safari. (I clicked all the right clicks to make them show up, too.)
    So the question is:
    Why does the Safari website Navbar not show the existence of my second site, the Announcement email that goes out to my friends does provide a hyperlink for that second site? (Someone here told me that I have to give that second site a name, and I have not yet done so. So if I have not, then why does the Announcement acknowledge that second site?)
    Lorna in Southern California

    Hi Lorna,
    I don't use the announcement function, so it's
    interesting to me that it does that. Thanks for the
    heads up.
    As far as your second site goes, iWeb does not
    automatically put a link in the navigation menu of
    the first site to help people go to your second site.
    You will need to do this yourself if that's what you
    want. You will also want to provide a link back to
    the first site on the second site so that your
    visitors can "travel" from site to site back and
    forth. But iWeb really considers the two sites to
    be separate and that's why it doesn't do this
    automatically for you.
    Some people who have multiple sites choose to make a
    sort of Welcome page that functions as a directory of
    their sites. On this page, all they have is buttons
    that are linked to each of their sites so that people
    can just click and go to the respective site. Just
    another idea to throw out there.
    And you know what? I am wavering between second site and just one site. Lorna in Southern California

  • How can I log into two differant accounts at the same time in two windows without the second window affecting the first.

    I'm trying to log into two facebook accounts at the same time in differant windows. When ever I log into the second account in the second window it changes the login in the first window. When I hit home or any other link the first window account has been logged out and logged into the second window account. I tried installing a second copy of firefox in a differant folder that the first but it seems to use all the files of the first installation. If I can get 2 toatally seperated instalations that don't rely on the same history, cookies, cache, etc I belive that will solve my problem. Please help.
    == User Agent ==
    Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 5.1; Trident/4.0; .NET CLR 1.1.4322; .NET CLR 2.0.50727; .NET CLR 3.0.4506.2152; .NET CLR 3.5.30729; OfficeLiveConnector.1.4; OfficeLivePatch.1.3)

    Nah, that won't work. Facebook has a feature that gets your IP Address, so as soon as you sign into one on the same computer, it changes the other login for safety purposes (say, someone was on a public library PC. They forgot to log out. Someone else logs in, and it automatically logs them out). You'll need 2 computers to do that.

  • Accessing your site for the first time.

    As provided the example code will allow you to access an example site. As your first test it is advised that you run the example code without modifications to ensure that you can access this site.
    Once this is done, you can update the example code with the information provided when you activated your site. Once you have access to the site you will see one empty course page that will allow you to get familiar with the basics of managing an iTunes U course page.
    Please note: the debug page which is accessible by appending the debug suffix to your destination is not functional at this time. Apple is working to address this issue.
      Mac OS X (10.4.6)  

    Hi Tony,
    Can you provide some details as to what your IT guys are puzzled by? Apple wants to make sure the documentation for iTunes U is as clear as possible so understanding what is puzzling will help improve the documentation.
    The first thing to do is modify the example code with the information provided when you activated your site. I can tell that you activated your site successfully because I do not get a 404 Forbidden error when I click on the URL you provided.
    From your description it sounds you have included the debug suffix in the destination variable. Don't include the debug suffix as this functionality is not fully implmented. It will just cause confusion.
    Apple will not be able to provide examples of integrating with Active Directory at this time. Basically you will need to access user records in Active Directory and get the credentials that as user record has. Alternatively the transfer script/program could access what students are in a class and generate the correct credential for that class. This might become more clear as we publish the rest of the admin guide.

  • My company recently loaded foxfire and I cannot have two applications open in foxfire, the second page overlays the first and I cannot go back to the previous page or reduce the first page to view the first.

    My pages in Foxfore are overlaying one another which is normal but you cannot get back to the previous page. An example is if I have a page opened in a program and open something totally different it replaces the first page and I cannot reduce the size to see the first page I was viewing nor go back to it. I did open a page with audio and opened another application in foxfire and the replacing went on as usual but the audio continued to play so the page is stinn there. Also the tool bar page showing icon is replaced with the newly opened page not an additional page opened being shown as a tab. It's like the newest page or site I open in Foxfire replaces the one that is currently opened.
    == This happened ==
    Every time Firefox opened
    == I first had sites opening with Foxfire

    This might be caused by a recent Flash 11.3 update.
    See:
    *https://support.mozilla.org/kb/flash-113-doesnt-load-video-firefox
    *https://support.mozilla.org/kb/keep-flash-up-to-date-and-troubleshoot-problems
    Clear the cache and the cookies from sites that cause problems.
    "Clear the Cache":
    *Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Websites+look+wrong

  • How to call the second mapping in the first mapping fails in the BPM

    Hi All,
    I have a scenario like this.
    There are two mappings. There is a one condition while genearying the root element of the first mapping. If this condition is not satisfies the first mapping will fail. If this mapping fails i want to trigger another mapping.
    How to achieve this functionality.
    If it is possible with BPM. how to call the second mapping in the BPM.

    Hi
    you can not create the containter for the synchronous interfaces.
    you have to craete the two asysnchronous abstact interfaces .
    thenusing those two abstract interfaces you have to define the containers in the BPM.
    and you also have to define the interface mapping b/w those two abstract interfaces.
    once you define the interface mapping you will be able to select the interface mapping using the transformation step in BPM.
    once you select the interface mapping in BPM then you will be able to selece the interfaces
    if you still face the problenm please reply me back.
    Thanks
    Rinku Gangwnau

  • CME - Second Call Drop the first call

    Greetings,
    Anyone ever seen something like this?
    I get a call on my extension, and when I receive a call on another phone, the first call (in my Phone) drops.

    I'm seeing this also with IPC softphone version 8.6.
    Has anyone resolved this issue?

Maybe you are looking for