Second site... what am I doing wrong?
I have searched for this topic, but cannot find anything dealing specifically with what I am having problems with.
I have made a second site. I have tried to upload and I can not see it in my browser. All I can find is my first site.
NOW HERE IS THE KICKER, unlike others who have had this problem with .mac, I am trying to upload it to my server at work.
Also, my first site is a podcast and takes a while to upload, so is it possible to upload ONLY my second site?
Thanks
Randy
I assume you are developing your two sites within the same Domain file. Therefore, when you use "Publish to Folder" in iWeb, both of your sites would be published into the same folder. So you would end up with 3 things inside your folder. An "index.html" file and then two folders representing your two sites. Now, inside each of these two folders, you should see that each of your sites has its own index.html file. So when you upload your sites, you should upload these two folders to the appropriate location. In order to see one site or the other, you would have to specify their URLs with the following format...
http://www.yourserver.com/folder1name/
http://www.yourserver.com/folder2name/
Before you probably uploaded the outer index.html file as well as the site folder to your server so that all you had to type was...
http://www.yourserver.com/
...and you would get to your first site. The problem is that with more than one site, that outer index.html file always points to the default start page (whichever site is listed first in the iWeb Site Organizer). Now, it's fine if you uploaded it...just know that you have to use the following URLs...
http://www.yourserver.com/ <== this defaults to the first site
http://www.yourserver.com/folder2name/ <== this would bring you to the second site
Hopefully, this is clear to you. Try out the second URL and see if you can access your second site. I'll bet everything is fine.
If any of this is useful information to you, please do me a favor and mark my reply as "solved" or "helpful" using the little buttons that you see in the title bar of this reply. I would appreciate it. Thank you.
Similar Messages
-
When I try to convert a wav file to an mp3 it only gives me a 6 or 7 second mp3....what am i doing wrong?
Sorry you are having problems. Can you give an example preferably of some small publicly available file and the site you are trying to download it from ?
As a simple example of a download (ok it is a .png image file not not a .exe file) but can you try to download a copy of your avtar/icon, as used on these forums. In Windows one method is that you right click & should get an option save. <br/> Mine alongside uses the link
* https://support.mozilla.com/media/uploads/avatars/avatar-257447.png
Are you able to download such an image, then see it in your download manager, and find it on your computer.
Once you have got Firefox to save your binary file you can use it. In the case of the .exe file you are trying to download that should be usable as intended with your Windows Operating System, the avatar also should be easily opened and viewed.
P.S.
You could try installing the add-on https://addons.mozilla.org/en-US/firefox/addon/opendownload-10902/ if you wished to adapt Firefox to run .exe files instead of just save them. -
I am trying to use motion tracking to have text follow a section of the background.The text box follows the motion path, but the text just sits there. What am I doing wrong?
Motion basically looks at the the source footage and it's timing (in the timing section of the Inspector) when analyzing for tracking. Filters are basically ignored by the tracker. Retiming actions, like time re-mapping, or retiming behaviors that are applied before the tracker should be used by the tracker. Did you change the timing after doing the tracking? If so this would also require you to re-track the shot. Understanding that you found a workaround, describing the effects you applied would help to explain why you ran into problems.
Cheers! -
I have set up a second iTunes user account on my PC, but when I create the new iTunes account it copies the music, videos etc from the original account and they seem to be linked, so that when I delete a song from one library it deletes from the other one.
On the online tutorials I've seen it shows that when you create a new iTunes library it should open as a blank account, but that isn't happening.
What am I doing wrong?If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar. The sidebar is where Devices appears. and Control+B to show the Menu bar
If necessary:
iOS: Device not recognized in iTunes for Windows
or
iOS: Device not recognized in iTunes for Mac OS X -
I'm trying to sync a 4s so that it can be activated w ATT...my computer says that I need to have 11.1 or higher in order to do that but when I download from the itunes site nothing happens and I still can't sync phone...what am I doing wrong?
The screen that says "Download Now" also shows the proposed iTunes version number (in the box below):
Be sure it indicates 11.1.3.
If it is, here's further troubleshooting:
http://support.apple.com/kb/TS1538 -
Trying to update iTunes on iPhone 4s. Went to site, selected download, says thank you. Plug phone into computer and pops up cannot be used phone requires 10.5 blah blah blah. What m I doing wrong?
i used to have no trouble downloading music on my iphone 4s from i tunes, but now it just says cant download try later. is this caused by not having the current update or something else?
-
I just got an iphone 5c and downloaded ringtone maker and made a 30 second 4r ringtone and when I try to drag and drop it in the tones folder of itunes nothing happens. What am I doing wrong?
If the file is a correctly formatted AAC file with the .m4r file extension and less than 40 seconds long, then iTunes should put it into the Tones section of the library and move it into the Tones folder inside your media folder.
I've just checked the current version of iTunes behaves as I've desribed, which it does for me at least.
You may need to have some tones in your library for the tones tab to display when the device is connected.
tt2 -
At some point my ability to add sites from the new tab page, change site displayed sizes, etc. has stopped working. I liked this feature. What changed or what am I doing wrong?
Do you still see the about:newtab page with the 3x3 tiles?
Did you modify the number of rows and columns on this page?
*https://support.mozilla.org/kb/new-tab-page-show-hide-and-customize-top-sites
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem.
*Switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance
*Do NOT click the Reset button on the Safe Mode start window
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes -
I am trying to install the latest upgrade for Adobe Photoshop Lightroom 5.pkg but the program will not accept my password, which works when I log into Adobe. What am I doing wrong?
G¹Day Ned, Thank you very much. That worked. I like simple solutions. Thank
you, again, for taking the time to respond. Steve -
I am trying to print redplum coupons and I can't, help. I have updated java, adobe flash, and made sure my printer was set on default. I am not sure what I am doing wrong. I have contacted redplum and no one will help.
No Apple response??? Redplum/Valassis will not help either. I searched, using the cups error message and though it is Unbuntu, same error so maybe useful...only problem: details would not display unless I join Unbuntu forum. What a pain to do anything with my Mac or find any help. I honestly regret buying this buggy OS.
Anyway, here is what I found, FYI:
http://ubuntuforums.org/showthread.php?t=483415
As the old saying goes: when in doubt, consult the manual. The problem appears to be that I added the printer using the KDE Add Printer Wizard. It was automatically given a "socket" URI instead of an "lpd" one. When I:
- altered the printer settings at http://localhost:631 (the CUPS admin page) as instructed in the manual for the printer, and
- copied the PPD file into a second place on the hard drive (as instructed on ubunutuforums, see the link above)
..everything started working.
It's still slower than windows, but I can live with that
Probably a simple fix. Change the socket I.P. to match the printer I.P. like this:
socket://192.168.1.86:9100. The thing I'm concerned with using socket:// is that AFAIK the printer I.P. must not change. In my case I'm able to assign a static I.P. address to the printer but it's something to consider.
I found that the only thing I needed to do was change socket to lpd (and remove :9100 off the end as well). See Solving Ubuntu printer broken pipe problem (DocuPrint C525A) . BTW thanks for steering me in the right direction - very grateful.
Solving Ubuntu printer “broken pipe” problem (DocuPrint C525A)
Posted on November 25, 2008
Are you having a problem with your printer under the latest versions of Ubuntu (perhaps it worked under an older version)? Are you able to print short documents, but not longer, or more graphics-intensive, documents? (e.g. the unfortunate people at http://ubuntuforums.org/showthread.php?t=625493). Do they sit there as Processing for ages and then switch to Held? If you have the same problem I had the solution I tried may work for you too. Firstly, check your cups error log:
sudo gedit /var/log/cups/error_log
If you see anything like the following, the solution may be simple:
[Job 201] Unable to write print data: Broken pipe
PID 13359 (/usr/lib/cups/backend/socket) stopped with status 1!
System > Administration > Printing and right click on your printer, selecting Properties. Settings > Device URI
If you see something like socket://your_printer_ip_address:9100 just change socket to lpd and remove the :9100 off the end. Then click on apply.
Apparently lpd is a more modern protocol which works with most printers whereas socket is more raw (and potentially faster but riskier in a network situation). Somewhere along the line, the default Ubuntu/Gnome setup for networked printers shifted from lpd to socket. Some primitive printers will have benefited whereas a larger number of more modern printers will have suffered.
Please correct me if I am wrong (which is highly possible) but the underlying problem could be that socket may make the printer wait a long time for a large file to be processed ready for printing. Some printers, such as the Fuji Xerox DocuPrint C525A, may drop the socket if things take too long to start coming through.
Changing timeout settings might work but lpd is better than socket so it is the preferred solution in any case.
If this works for you, please leave a comment to let others know (ideally with a description of the printer and Ubuntu version). Printer may be relevant if it doesn’t support the direct stream protocol properly. NB I may take a while to let your comment through because of the volume of spam. Sorry about that.
Finally, thanks to sphilli8 for the steer in the right direction at http://ubuntuforums.org/showthread.php?p=6245626.
http://ubuntuforums.org/showthread.php?t=483415 -
I keep getting this error in Dreamweaver when I am trying to upload my website? Can you tell me what I am doing wrong? here is the error message: /html - error occurred - Unable to create remote folder /html. Access denied. The file may not exist, or there could be a permission problem. Make sure you have proper authorization on the server and the server is properly configured. File activity incomplete. 1 file(s) or folder(s) were not completed. Files with errors: 1 /html
Nobody can tell you anything without knowing exact site and server specs, but I would suspect that naming the folder "html" wasn't the brightest of ideas, since that's usually a default (invisible) folder name existing somewhere on the server and the user not having privileges to overwrite it.
Mylenium -
Hi, just bought my daughter an Iphone 4s and I can't get it to let her on youtube, Facebook etc., keeps saying no internet connection. My husband and I have 3G smartphones and we can get on them on ours, so I'm not sure what I'm doing wrong. Also, my other daughter has the same phone and has no trouble getting on these sites either. Any information to help is greatly appreciated. Thanks
Well, did you activate this new phone?
-
Can't figure out what I'm doing wrong
I'm using Studio 8 in Mac OS X (10.4.6). I've got some pdfs
uploaded to my site that are accessible through links one one of
the pages. I had to make changes to the pdfs and resave them. I
thought I uploaded them, but when I test the links it downloads the
old version and I can't figure out what I'm doing wrong. Here's
what I did.
This may be a dumb way to do things, but I saved the new
version and then dragged into the server file in
user-->Library-->Application
Support-->Macromedia-->Dreamweaver
8-->Configuration-->ServerConnections-->unnamed
server-->public_html (this is where all the other files are).
When I go back into Dreamweaver and open the pdf listed in the
Files window on the right (by control-clicking and selecting Open
with-->Acrobat) the correct version appears. I thought maybe
there was a delay or something, but I've waited and still the old
version is what you get from the site.
Is there an easier way to do this, or is something wrong
maybe? Many thanks in advance.> This may be a dumb way to do things, but I saved the new
version and then
> dragged into the server file in
user-->Library-->Application
> Support-->Macromedia-->Dreamweaver
Put the files in this Site's Local Site Folder.
If unsure of where you've specified this to be, look in this
site definition
(dw menu-->Sites-->Manage or Edit Sites)
If that path you've given above above is correct, it's
wrong.... -
Just installed CC on my PC, Windows 7, 64 bit system. Not seeing any applications on the desktop or installation folder. However, all the resource files are present in the installation folder. What am I doing wrong?
I've installed three times with no luck. I downloaded the Creative Cloud Packager off the licensing site: https://licensing.adobe.com. I unpacked and choose my applications. The install seemed to be successful, but I don't so any of the applications anywhere.Hi,
Creating package doesn't mean it will install the product,
You will need to install the package now. Please follow the instructions mentioned in the below articles
Creative Cloud Help | Creating or editing packages
Creative Cloud Help | Deploying packages
Please let me know if it doesn't help.
Regards,
Devendra -
I'm trying to install the new version, but each time during the installation, "Error writing to file: C:/Program Files (x86)/Common Files/Apple/Mobile Device/Support/AppleMobileDeviceHelper.resources/Info.plist." Keeps popping up. What am I doing wrong?
That one's consistent with disk/file damage. The first thing I'd try with that is running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, can you get an install to go through properly afterwards? -
My iPad one won't charge with any cable I buy? Tell me what I am doing wrong.
I have an iPad 1 and have had no major problems with it til now. I want to continue using it, I use it for many things and it would suck if it stoped working because of something IDK about. My first and only apple product.
The charger cable (That came with it) finally broke. The wires just came apart and it wasn't salvagable. I had an Ipod cord here that a friend left and plugged it into the original port (The one that was working fine with original charger and came with ipad). It was a tight squeze into the iPad (which I thought was normal) but I got it into there so I thought it would work. It won't work. So i bought a charger said to be used to ipads, and I plugged it in, same thing happened. I did however still sync it into the computer with the new cable I bought. What am I doing wrong that it won't charge on the wall anymore? Wrong cable? I'm confused. Please help!Could be the charger, cable or iPad. Plug the USB cable into your computer. It may say "Not Charging", however, it is charging slowly and will verify that the cable is good.
Try this first - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
iPhone: Hardware troubleshooting (Power/Battery section also applies to iPad)
http://support.apple.com/kb/TS2802
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
iOS 7 Battery Life Draining Too Fast? It’s Easy to Fix
http://osxdaily.com/2013/09/19/ios-7-battery-life-fix/
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
iPad: Charging the battery
http://support.apple.com/kb/HT4060
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom
Maybe you are looking for
-
Error during installation of SAP on win 2003 Server
Hello All, I am trying to install SAP 4.6 on win 2003 server. The process of installation has completed for almost more than 9 hours. I am getting an error during "Database post processing". When I clicked "retry" the installation has stopped and res
-
Finding File Name And Using It To Place The Graphic Using VBscript
I'm trying to find a file name (example, <place:E:\logo.tif>) in each text frame if it's there, then remove the text from the frame and then place the file in the frame. This is to get around the feature missing from InDesign that is in PageMaker tha
-
BoLinkedObject not working correctly.
Hi, the golden arrow is not working when the linked object type is sales person 53 and the item group 52 in SAP2007. Is there any solution for this problem? thanks in advance...
-
HT1420 Where is the "Store Menu" located in iTunes? I cannot find "Authorize This Computer"...
Where is the "Store Menu" located in iTunes? I cannot find "Authorize This Computer"...
-
"You need to have the Adobe Flash Player to view this content" pops up in the video box
"You need to have the Adobe Flash Player to view this content" pops up in the video box een though I've installed the latest version. Help please.