Second time application does not come - JWS hangs silently

Hi Guys,
I am using jdk1.6.02,Eclipse. When i launch my application for first time through JWS, downloading of files takes place,application is launched successfully. When i launch my application second time, JWS splash screen comes and disappears silently without raising error Message. Nothing happen after that.
On other hand i can launch application as many time through Eclipse.
I looked at logs C:\Documents and Settings\....\Application Data\Sun\Java\Deployment\log but no clue why this is happening..
Can someone suggest What i need to do inorder to make sure application comes successfully second time as well? Where errors for JWS located on system?

Do you have a testcase can send to me? I would take a look to see if it is bug in Java webstart code, is this problem only apply to one application? or do you have any trouble to run other Java webstart application using JRE 1.6 u11? Another option is trying to run early JRE 1.6 release, such as 6u10 or early.
My email is [email protected], thanks for your help.

Similar Messages

  • Applications does not come up as a folder in Finder.

    How to get Applications besides in Volume?  For years all I needed was Finder.

    Double-click the boot volume Desktop icon (Finder->Preferences->General->Enable Show Hard Disks), set the window that pops up in list view, and you should see something like this:

  • MBP does not come back after hybernation

    Hello everyone,
    I am enjoying my MBP except for one problem. It does not come back after it hybernates sometimes.
    I hit a key, hear the superdrive do it's "thing" and then after much waiting (approximately over 10 minutes) no picture or video on the screen!
    I can tell that it's still powered on because it's plugged in and when I hit the Caps Lock key it lights on and off.
    The only way that I can get it out of this state is to hold down the power button, unplug the power cord, take the battery out, hold in the power button for 4 seconds, reinsert the battery and power back on.
    I have to then cycle the power back off because the first time it does not come back but I just get the blank white boot screen and no 'apple'.
    When I turn it back on the second time, it boots up.
    Anyone else have a problem with this?
    Thanks for listening!
    Mark

    Hello Gweedo!
    Yeah I have the same issue and am up to date. Apparently this is a pretty huge problem with the Macbook Pro since the last Graphics update after updating to 10.5.2.
    http://discussions.apple.com/thread.jspa?threadID=1394449
    I have been perusing through that topic and hopefully they will come up with a fix for this.
    The only work-a-round that I have found (but haven't tested extensively yet) is to disconnect to the wireless, turn off blue tooth, disconnect my external monitor and then go into sleep mode. Then it always comes back. But if I leave it connected to the wireless, bluetooth, and external monitor - it's a crap shoot as to weather or not it will come back up.
    This is pretty frustrating because half of using a laptop is being able to hybernate and sleep properly.
    I even have the 'smartsleep' installed.
    Thanks for commenting everybody!
    Mark

  • Every time I unmute my iPad, the sound efx does not come back. I can hear my keypad and the on/off sounds but no app sounds.

    Every time I unmute my iPad, the sound efx does not come back. I can hear my keypad and the on/off sounds but I can't here the sounds from deleting photos, clicking on apps that are on my iPad. It does this every time I unmute my iPad. Please advise.

    Hello PearldiamondMD,
    I was thinking of a few recommendations for you. I recommend our iPhone Troubleshooting Assistant found here http://www.apple.com/support/iphone/assistant/phone/#section_1. Start at section 1, if that doesnt fix it, then section 3, and if all else does not work, section 5. At section 3 I recommend closing ALL the apps.
    Here is section 1 to get you started.
    Restart iPhone
    To restart iPhone, first turn iPhone off by pressing and holding the Sleep/Wake button until a red slider appears. Slide your finger across the slider and iPhone will turn off after a few moments.
    Next, turn iPhone on by pressing and holding the Sleep/Wake button until the Apple logo appears.
    Is iPhone not responding? To reset iPhone, press and hold the Sleep/Wake button and the Home button at the same time for at least 10 seconds, until the Apple logo appears.
    If your device does not turn on or displays a red battery icon, try recharging next.
    All the very best,
    Sterling

  • HT201250 time machine application does not open

    Tried to open Time Machine but the application does not start up.
    Software is up to date.
    Preferences are set to "on" with oldest backups from November 2011 and plenty of room left on external hard disk unit.
    Need some tips or tricks to be able to search a recent backup for missing files.
    thanks!

    Please try each of the steps below that you haven't already taken.
    Step 1
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
    Click the Clear Display icon in the toolbar. Try again to enter Time Machine. Post any messages that appear in the Console window – the text, please, not a screenshot.
    Step 2
    Open the backup volume in the Finder. You should see a folder with the name "Backups.backupdb". You should not see a file with a name ending in "sparsebundle". If you do see that, the backup was created over a network and can only be used that way.
    Step 3
    Launch Disk Utility and select icon of the backup drive in the pane on the left (not any of the volume icons below it.) At the bottom of the window, you should see this:
    Partition Map Scheme : GUID Partition Table
    If the partition scheme is anything else, the drive has to be repartitioned (with the loss of all data.)
    Step 4
    In the Finder, select Go ▹ Go to Folder... from the menu bar, copy the text on the line below into the box that opens, and press return:
    ~/Library/Preferences/com.apple.finder.plist
    Move the selected file to the Desktop, leaving the Finder window open for now.
    Relaunch the Finder by selecting  ▹ Force Quit... from the menu bar, then selecting Finder and pressing return. Your Finder settings will be lost.
    Try again to enter Time Machine. If you still can't, put back the file you moved to the Desktop, replacing the newer one that will have been created in its place.
    Otherwise, close the Finder window you opened and delete the file you moved to the Desktop. Recreate your Finder preferences.
    Step 5
    Boot in safe mode by holding down the shift key at the startup chime. Try again to enter Time Machine.
    Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.

  • HT1551 When streaming a movie or tv show it stops after a short time and does not complete the streaming. comes up as an error occurred loading this content try again later

    When Streaming a movie or tv show it stops after a short time and does not finish downloading. We watch the TV show or movie than nothing !!!
    a message comes up  An error occurred loading this content try again later.  We have unplugged everything rebooted several times and nothing
    helps.  It was working fine until we did a upgrade that showed up on the Apple TV. 
    modle A1427 3rd generation
    Any help would be GREATLY appreciated Nothing on regular TV  miss my Apple TV stuff !!!!

    Welcome to the Apple Community.
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Reset the Apple TV (Settings > General > Reset > Reset all settings)
    Restore the Apple TV (Settings > General > Reset > Restore)

  • There are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responing, close fire fox, or shut down computer. There are other times that it starts up normaly wit no probs

    # Question
    there are times when I try to start firefox 3.6 that it does not come up,but when I click it again, I get fire fox is running but not responding, close fire fox, or shut down computer. There are other times that it starts up normally wit no probs
    ..

    Not using any mouse pad, I have a very smooth desktop. But I just tried to use a sheet of A4 printing paper, but no result, the problem persisted.
    Someone on this forum suggested, that USB3 may interfere with the magic mouse.
    I have 2 LaCie HDD's about 70 cm away from the mouse, I use them on Thunderbolt. But in operation or not - the result is the same, the mouse plays up! Just now I was clicking the desktop and the mouse created a new folder!!
    Thanks for the advice, Bee
    Cheers, Gerd

  • My iPod shuffle, which I prchased in 2009 only worked for a short time so I put it back in the box and just recently took it out. I will not charge and the power light does not come on. It was faulty from the start and thought I was out the money I paid.

    My iPod shuffle only worked for a short time. It will not charge  and the power light does not come on. Bought it in 2009. Put it back in the box and in my desk. Recently tried to get it to work again but no luck. Anyone else have this problem? Very disappointed with the product although my wifes work perfectly.

    Can't say I haven't done the same kind of thing...keep finding things I had every intention of...
    If you have the chance stop by an Apple Retail store and talk to them about it...they often work deals for replacement of out of warranty non-working items for prices around half price.  Won't hurt to stop by and see what they will do for you.

  • Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it.It is 4 gen running on 4.3.3

    Since yesterday I am facing problem,when it goes in sleep mode it actually turn off and does not come up after pressing start button but every time I have to hard reset it to turn it on .It is 4 gen running on 4.3.3.Please help

    so I have called HP tech support 12 times over the last 6 weeks and still my HP Officejet 4620 loses connection overnight. Of course becasue it was a birthday present I spent more time than I normally would have on this issue. While the tech are very polite they have not fixed my problem and now it is too late to return printer to store. This is a lot of money wasted and I think they need to admit this is a bug in this printer and resolve the problem!!!!!

  • My mail does not come in automatically even though i have it set as auto. I need to click on get mail each time

    My email does not come in until I click on get mail. I have the check mail set automatically in my preferences under general. What am I doing wrong? Cheers John

    OK Vicky, good clues...
    See if this helps...
    Open Keychain Access in Utilities, use Keychain First Aid under the Keychain Menu item, then either check the Password under that item, change it, or delete it and start over. See if there are duplicates, should be one for Incoming & one for Outgoing.
    Resetting your keychain in Mac OS X...
    If Keychain First Aid finds an issue that it cannot repair, or if you do not know your keychain password, you may need to reset your keychain.
    http://support.apple.com/kb/TS1544

  • Host Command does not come back

    Hi,
    I have treid to export schema by pressing a button, (form designed in Form10gR2 and excute via Application Server R2. )
    For this I have applied one by one these syntaxes
    1) host ( 'cmd /C start "" "'|| exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
    2) host ( 'cmd /C exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
    3) client_host('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
    4) WEBUTIL_HOST.NONBLOCKING('exp USERID=SYSTEM/MANAGER@ora11 OWNER=scott,hr FILE=E:\JAN10.DMP');
    When my client/ user executes the command, session goes hang and application screen does not come back. If I execute the exp command directly from the Application Server Command Prompt then exp works.
    Please help me, what is the syntax to get the dump wihtout hanging the session.
    Database 11g Linux
    Application Server 10R2 Window2003.
    Developer 10gR2.
    Client Windows , Explorer, FireFox etc.
    Regards.
    Priya.

    Hi Priya,
    It is always a better practice to call a batch file using the host command instead of hardcoding the command inside form. Which would help you to modify the batch file for any changes, without re-compiling the forms.
    In this case, create a batch script, which would set the ORACLE_HOME etc (to make sure the exp command is recognized, you need to add the DB ORACLE_HOME/bin to the PATH), and then call the command to export. You can also parameterize the batch script and pass the parameters from form, separated by space.
    -Arun

  • Preview application does not print images correctly sized

    The Preview application does not show me what size the image will print out.
    It defaults to Scale to Fit: Print entire image.
    The % in the Scale: window seems to be what the % turns out to be, depending on which Scale to Fit: is selected.
    If I click into Scale:, and then change the %, when I hit Return, it prints immediately without allowing me to preview what size the change actually looks like.  Need to change that behavior!!!  Can't see how to do it.
    Probably want the default setting to be Scale: 100% but can't figure out how to do that.
    ALSO the Preferences / Images setting has two choices.
    But playing with the Define 100% scale as just changes the size of the image in the Preview viewing window.  The PRINT menu still has the same default and the same Scale: % size.  No matter which I select, the PRINT default is still the same %.

    OR....
    https://discussions.apple.com/message/10689391#10689391
    choiropiha
    Dec 4, 2009 7:48 PM 
    Preview.app in Snow Leopard has removed the option to print without scaling, and recreating this behaviour with the remaining options is quite complex and requires 4 extra steps. Steps to Reproduce:
    1. Open a document in Preview.app, such as a PDF, of a known paper size.
    2. Select 'File' > 'Print…'
    3. Change the paper size to one where the default scale value with the default 'Scale to Fit:' 'Print Entire Image' is not 100%. This step is often unnecessary, as many documents will require reduction to include margins, even if the paper sizes match.
    4. Select 'Scale:'
    5. Select the scale % value.
    6. Delete the scale value.
    7. Input '100' in the scale value box using the keyboard.
    8. Press tab to avoid radar #7256827.
    9. Click 'Print' Expected Results:
    Click on a single option to print at 100%, if by chance that wasn't the default option. This would have been one step. Actual Results:
    Does what it says. Steps 4 through 8 are necessary to print at 100% in most cases. Regression:
    This behaviour was as expected in OS X 10.5.x and previous versions, or we wouldn't be having this discussion. Notes:
    Printing at 100% is the only scaling that is common enough to warrant a button to make it an easy one to get to. Preview.app itself even has an 'Actual Size' toolbar button, but has removed this function for printing.
    Graphic designers (and other professionals) or specific applications (such as printing on pre-cut or pre-printed paper, labels, or DVDs) can commonly require printing at 100%, and using PDF to distribute documents makes Preview.app the most logical choice for many printing jobs.
    Having something other than 100% as a default can cause expensive media to be ruined by a mis-scaled printout, unless these 4 (+1) steps are followed every time.
    Most other apps, including Safari, Mail.app and TextEdit default to no scaling, making Preview.app an exception. I am an architect and this is really annoying!
    Does anyone know a workaround? 

  • Upgrade to mountain lion, time machine does not work

    After upgrading to Mountain Lion.  My time machine does not save infomation anymore.  I've also lost a folder on my macbook pro.  This is the error message that I'm receiving.  Please help
    Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time  using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65c900560 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.
    Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time  using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65b209e10 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.
    Attempting to mount network destination URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Mounted network destination at mount point: /Volumes/charlie soukhaseum's Time  using URL: afp://Charlie%20Soukhaseum;[email protected]/charlie%20soukh aseum's%20Time%20
    Disk image already attached: /Volumes/charlie soukhaseum's Time /Charlie Soukhaseum’s MacBook Pro.sparsebundle, DIHLDiskImageAttach returned: 35
    Failed to mount disk image: Error Domain=com.apple.backupd.ErrorDomain Code=31 "The operation couldn’t be completed. (com.apple.backupd.ErrorDomain error 31.)" UserInfo=0x7ff65cd08190 {MessageParameters=(
    Ejected Time Machine network volume.
    Waiting 60 seconds and trying again.

    That seems unusual unless you changed drives.
    If you upgraded the drive it sees the computer as a different one to the original backup..
    I am not sure that it isn't better to do a fresh backup but you can try and inherit the old backup..
    See Pondini
    B5 B6 http://pondini.org/TM/Troubleshooting.html

  • Time machine does not backup anymore

    Hello all,
    I've been using my time machine for a month now, I kept it turned off and only connected the disk when I wanted to make a backup. Then I just hit Back Up Now from the menu and it always backed up everything (I used to check it afterwards). FYI, I've got a 500GB drive and for backups I use a 500GB partition on an external disk, where about 100GB is still free. All of a sudden, my time machine does not backup anymore. It does its run, whether a scheduled hourly one when turned on, or an on-demand one, but it only lasts a split second as though there is nothing to backup and when I enter the time machine, the files are really missing. I can't make it backup anything anymore. What is going on?
    thanks everyone

    cukerko wrote:
    Hello all,
    I've been using my time machine for a month now, I kept it turned off and only connected the disk when I wanted to make a backup. Then I just hit Back Up Now from the menu and it always backed up everything (I used to check it afterwards). FYI, I've got a 500GB drive and for backups I use a 500GB partition on an external disk, where about 100GB is still free.
    It's not related to this problem, but that may not be large enough. What's important is not the size of your internal HD, but how much is on it (or is expected to be on it in the next year or so). It varies widely, of course, depending on how you use your Mac, but Time Machine usually needs 2-3 times the space of the data it's backing-up.
    . . . it only lasts a split second as though there is nothing to backup and when I enter the time machine, the files are really missing.
    That sounds like the year-old unfixed bug detailed in red in #D5 of [Time Machine - Troubleshooting|http://web.me.com/pondini/Time_Machine/Troubleshooting.html] (or use the link in *User Tips* at the top of this forum).

  • How do I monitor a TCP/IP connection if my data does not come perdiodically?

    I have an application that connects to several acquisition devices where I get TCP packet data only when something changes. If the line gets cut, how can I monitor this so that the user of the application will know that no data will come from that certain acquisition device? Since the data does not come periodically, I cannot monitor the error from the TCP read function, i.e. Error 56 - Timeout.
    Is there a way to find out if an IP exists for example? (Such as a ping but it shoudl be fast)
    Thanks

    arikb-
    You can use the System Exec.vi to run a ping command through the command line and see if it is responding. You could also program the client such that it responds to a simple command with a verification message at any time. This would be similar to sending a ping, but it will also let you know if your LabVIEW program is on the other listening on the correct port.
    Xaq

Maybe you are looking for