Secondary Axis Label in Combination Chart

Hi Everyone,
I´m trying to make a Pareto Diagram with a Combination Chart, but I need a secondary Y axis for my cumulative frecuency. Is that possible???
Thanks in advance.

Hi Jessica,
It is possible to do  Pareto Diagram with combination chart.Do like this take one measure on Primary Axis and select second measure and enable the secondary axis and map the values.
Regards,
Ramana
Edited by: RamanaReddy Varra on Jul 27, 2011 11:38 AM

Similar Messages

  • Vertical axis labels on column chart

    I'm trying to get the x-axis labels oriented vertically on a 3D column chart, so that the labels don't overlap each other. With 2D column charts I can do this via "format>chart>format x-axis" but these options are grayed out with the 3D column chart. Is there any way to get vertical orientation on the axis labels with this chart type???

    It's usually not necessary to make the axis labels vertical to keep them from overlapping in a 3D chart since when you rotate the chart the labels are vertically offset. But you're right, there's no other control for this.
    Jerry

  • Change the Axis Labels of a Chart

    The Chart-Series are generate through AS (Multiple PlotSeries and 1 LineSeries). I managed to Update the Visuell Areas (in this example to manipulate Vertical Axis (minimum/maximum values to be shown).
    No I have 3 Questions about to manipulate this Chart with AS3:
    I would like to remove nearly all "Ticks" and "Labels" from the Axis. At the End only the min/max and 0-Label-Value on the vertical Axis should be displayed. And on the vertical Axis, I would like only to have the min/max-Label and 100-Value.
    The Chart-Lines (in the Screen above) only 2 Lines should be visible. v-Axis = 100 and x-Axis=0 (just as a Cross over the Chart)
    The Linear Serie (just a Value of a Funktion like x=y*2) should have no Tooltip if you go MouseOver-it. And the Legend of this Serie should not be displayed in the Legend. How can I delete the Legend, and how can I preserve a DataTip over this LineSerie?
    Hopefully you did understand my bad english.
    Thanks for any Tips
    Pawel

    Hi,
    1. IAxis interface have labelFunction (see docs for details and parameters for it). You can check the value to be labeled and return empty string if you don't want to show this value in axis. Axis you get from chart.getAxis(name). But there is not any warranty that always 0 will be shown. You showl implement your own IAxis to show only specific values. (Or search it in internet)
    2. You should remove all these grid lines and create CartasianDataCanvas this lines at 0 and 100 and put it to annotationElements of the chart.
    3. If you don't want to see all data from chart in Legend you should create an array with legend data only from serieses you want to see. Chart has a property legendData from all serieses. You can filter this array or create new array with legendData from serieses you want to see. And set this array as a dataProvider to Legend.
    Hope, this helpful.

  • How to edit axis labels in CR charts for crosstab report?

    I have a crosstab report created from tha table where column names havie sort order attached to it as 01_Jul FY10, 02_AugFY10 etc and I am able to remove it  in format field dialog box using dispaly string formula editor. So I am to display columns in specified order. but when I create chart , axis labels display column name with sort order. Is there a way I can remove sort order from column names while displaye in the chart and the legend entry box.
    Help on it is highly appreciated.
    Fizza

    Carl answered this one already

  • X Axis label of Column Chart

    Hello,
    I am Plotting column chart based on the data present in datagridview;Column 1(having string Data Type) as my X axis value and Column Y as my Y axis value.On Column chart click event i am fetching x axis and y axis co-ordinates of my column chart and displaying
    in Label on my form.But when i click it shows "0" as my x axis cordinate for the clicked column.
    As my x axis is having labels as 06:00:00-07:00:00,07:00:00-08:00:00,..........
    Below is image of my application
    f Chart1.Series(0).Name = "Daily Data" Then
    'Chart1.Series(0).XValueType = ChartValueType.Time
    Chart1.Series(0).Points(result.PointIndex).XValue.ToString()
    'xval = xval.AddHours(Chart1.Series(0).Points(result.PointIndex).XValue)
    Label4.Text = "Selected Coordinates are: " & Chart1.Series(0).Points(result.PointIndex).XValue.ToString & ", " & Chart1.Series(0).Points(result.PointIndex).YValues(0).ToString("f2")
    End If
    Else
    If result.ChartElementType <> ChartElementType.Nothing Then
    Dim elementType As String = result.ChartElementType.ToString()
    Label4.Text = "Selected Element is: " & elementType
    End If
    End If

    You need to get this example from Microsoft. It is a c# project code you just run it in Visual Studio. It shows most everything you can do with a chart. It shows the vb code when you run it and click the vb tab. Near the bottom of the left tree is Appearance
    - Labels etc. Also under data types there are date and time examples. This link is also in the forum faqs at the top of the chart forum posts.
    Chart examples.
    I think you need to tell the chart to use datetime for the labels but I am not sure how and I am not too good with them but that is why I do this to learn things. I would just look in the chart examples from the link I show. That is how I answer most of
    the questions here.
    Can you reproduce your problem using the simple example from the other question? Otherwise I cant really do much.
    Also, most times when you make a simple example you will find the problem or at least understand it better.
    So take a look and come back if you cant get it I then I will try too.

  • How to Axis labels for Line charts in Business Graphics

    Hi
    I am planning to do the Business Graphic example using Line chart.As part of this
    i didn't clearly understand what is the perpose of Series,Points,categorys?
    if i want to set the Labels at X-axis and y axis ,then how to do that?Baiscally i want to put time related data as X-axis label(20min,30min,60 min etc).Please help.
    is there any good example to understand the concept?
    Thanks
    Prasad

    Hi Bachier
    Thanks for your repsonce.I had seen the example you suggested.but there is no answer for my question.How to set the x-Axis,Y-axis Labels.I had done example for "line chart".But i have same problem:
    Hi
    I am trying to do example on "line chart" using Business graphics in my webdynpro application.
    In the Context i created Node "A" under which i created "B".then it has  value attributes xValue,yValue.Then in View i created BG UI element >Series>point-->NumericValue(for xValue) ,NumericaValue(yValue).Now in view init() method i had initialized values to x and y. some output is coming.but i want to know how to set the X-Axis Label,y-Axis Labels.in X-Aix Label i want to mention time in hrs i.e 8.00,8.30AM,9.00AM,9.30AM etc.as part of y-axis labels i want to mention numeric values( .2,.4,.8,2.0 etc). Please tell me how to set this X-Axis,y-Axis labels.at every 30min(8.00Am,8.30AM etc) user enter quality data(i.e .2 etc) then i want to generate chart.Please help in this regard.i will give very good points
    Thanks
    Prasad

  • CR Enterprise - Custom y-axis labels for line chart

    Hi
    I have data with a discrete status (STATUS-1...STATUS-5) per day, like
    Feb 1: STATUS-1
    Feb 2: STATUS-2
    Feb 3: STATUS-2
    Feb 4: STATUS-1
    Feb 30: STATUS-4
    Feb 31: STATUS-1
    This series I'd like to render in a date axis line chart with the daily status ordinals (1-5) on the y-axis.
    Now I wonder how I can label the y-axis ticks with the respective STATUS text instead of the ordinal.
    Unfortunately, the option "Total (Y) Axis/Axis/AxisLabels/Display Label" is disabled due to the value's numeric nature.
    How can I manually overwrite y-axis labels or map them to custom text?
    Thanks. Jens

    HI Jens,
    Have you tried creating a formula and using that in 'Show Values' section of the chart?
    Formula:
    "STATUS-" & {Numeric_field}
    -Abhilash

  • Axis label texts for charts

    Hello,
    I am using a query with horizontal drillacross as a basis for a chart and 1 key figure.
    The axis legends are showing up as "CHAR/KYF" where CHAR is the characteristic value in the columns and KYF is the key figure column description.
    Is there a way to influence the automatic labelling so that it shows only the characteristic value?
    Having fixed texts is not an option because we don't know in advance what the characteristic values will be.
    Many thanks,
    Pieter

    Can any body suggest a solution to this issue.
    We are having same problem....

  • How do I change the mouse-over value format on the secondary axis?

    Can anyone tell me how I can change the number format for the mouse-over values on the secondary axis of a combination chart?  Right now they take on the format of the primary axis values.  In my case, I need the primary to reflect a general number with three decimals, and the secondary to reflect currency. 
    Many thanks,
    Devin

    Agreed. The option I've used before is to name the axes "Revenue ($)" and "Gross Margin (%)" (or whatever) and that makes the numbers a little more readable.

  • How to display axis labels on both x and y-axis of a column chart

    hi,
     i have an urgent requirement of having axis labels on both x and y axis
    In x-axis i got it by sorting order also but in y-axis i'm unable to do
    i need in y-axis ,my column values are L1,L2,L3,----L10these shuold display in y-axis in sorting order and 0 in axis should remain as it is ..........how to take the interval ....? as of now i'm using Auto
    my y-axis values shud look like 0,L1,L2,L3,L4,----L10can anyone get perfect solution
    thanx in advance
    lucky

    Hi Lucky,
    Per my understanding that you want to display the values(Column1) like  "L1,L2,L3....L10" which comes from the "Series group" in the Y-Axis label and keep the row group in "Category group" to
    display in the x-axis and Numric column(1,2,3,4) in the "Value", right?
    Gernerally the lable display in the y-axis is automatically based on the value of the Numric column in the "Value" and it default is numbric labels.
    I have tested on my local environment and in your scenario, i suggest to hide the axis lable of the y-axis and create an tablix to only show the one column contains the values (L1,L2,L3,L3) to display in the place of the hidden y-axis label.
    Detais information about to design an new y-axis label ae below for your reference:
    Create an tablix to display only the row group of the "Column1" ( for the
    Column1 may have duplicate values, you can create parent row group for this column and hide the detail column by setting the "Column Visibility").
    Right click the y-axis to select the "Vertical Axis Properties" and select the "Labels" on the left pane to check the "Hide Axis labels"
    Select the Chart Area and in the properties set value of left=0 under the CustomPosition:
    Set the border style=None for both the Chart and Column1's row group
    Drag the tablix at the position near the hidden y-axis and set the size of both the chart and the tablix to make the value in the tablix row group(Column1) to be align with the y-axis label:
    Right click the "Chart legend" to delete or hide the legend
    If you still have any problem, please feel free to ask.
    Regards,
    Vicky Liu
    Vicky Liu
    TechNet Community Support

  • Line Charts - X-axis Labels as function of X-axis value

    Hi,
    1) Is there a way to put X-Axis labels in line chart as function of X-axis values ?
    For instance, X-axis values are in minutes and I need to show those as Hours.
    I'm having Hours as separate column as well, but when its selected as X-axis value column, the line graph is disturbed.
    2) Also, how to specify the length/range of X-axis ?
    For instance, in dataset if I've x-axis values from 0 to 5 hours but still want to show on graph the X-axis till 8 hours.
    Thanks for your help in advance.
    Regards,
    Sumit

    Hi Sumit,
    I have tried following things with proper datetime format may be help you.
    1> in your applet code you can add below param
    <PARAM NAME="XAxisDateFormat" VALUE="H">
    it will display your levels in hours for more details please refer Date and Time Format under query template in MII help.
    2>In your Query template under date range you can select duration and duration unit.
    for 8 hour span you can select Duration = 8 and in duration unit = H
    I have tested it for a tag query, may be i did not understand your issue properly but hope it helps you!!!
    Regards,
    Manoj Bilthare

  • How to have rotated axis labels in charts without embedding fonts?

    Hi all,
         I am trying to have slant/rotated axis labels in flex charts to avoid clutter in cases of large number of sample points. It was fairly easy to do this using 'labelRotation' method in AxisRenderer but this involved embedding fonts [ causes my swf to increase in size by atleast a 100KB which in my case is very high ]. My question is.. Can this be done without embedding the fonts? Maybe with the use of labelRenderer? Any alternatives that would solve the purpose without increase in swf size are also most appreciated as I ve been struggling with this for quiet a while.
    Thanks a ton,
    Siva

    Please check LabVIEW\Examples\picture\demos.llb\polar plot demo.vi
    But it has no zooming and cursors.
    Maybe you can modify that example and use XY plot instead of picture control. I mean for each function plot on the picture, you generate another function to replace it and generate XY data pairs.

  • CR4E Chart Axis Label

    I have a report developed with Crystal Reports XI Standard that includes a chart. The axis labels for the chart have been set (via Edit Axis Label) and appear correctly in preview mode of the Crystal Reports XI designer (e.g. "District" instead of "Sum of StateReportsView.District").
    When this report is exported to a PDF file via a Java program (using Crystal Reports for Eclipse), the axis labels revert to their original values (e.g. appear as "Sum of StateReportsView.District").
    Can the axis labels be set before exporting the report via the JRC API?
    Or is there some way to save the axis labels to the report using the Crystal Reports XI designer?
    Thank you...

    Thanks so much for following up on this. To clarify, converting month numbers to names is nice, and I did that using the specified order suggestion, but it doesn't effect the order of say, May, when Jan thru Apr are missing, and in fact created other issues of data misintrepatation I didn't bother resolving at the time.
    I suppose the best solution would be something that supplies a placeholder for blank months, so that the Jan-Dec order remains constast and the data graph bars appear in appropriate months, Jan-Apr no bars, May-Dec with data generated bars.
    Does this help?

  • X axis labels in Charts

    Hello All,
    I am using column charts in my Xcelsius Dashboard (Xcelsius 2008 - SP5). The X-axis labels are too lengthy, it is displaying vertically. The requirement is to display the names horizontally and wrap the text. I cannot use label component as workaround as the names are populated dynamically. Any suggestions are appreciated.
    Thanks,
    Sowrabha

    Hi,
    This is common issue for all our developers, i will suggested you some workaround please try and let me know.
    1. If series values are less in horizontly then try to use bar chart and see whether it suits for you.
    2. Use the range slider to display only first 4 or 3 values, so that you can get the entire text without shrinked, later on they can slide to see all values.
    3. try to apply the below given logic, i haven't dont this. I thought it would be helpful for you.
    Handling long Y-Axis Labels in Bar charts in less space...
    Hope it helps!!!
    --SumanT

  • Programatically shifting X-axis labels in chart section of a .bqy document.

    Hi all,
    We would like to programatically change some properties like height, width for X-axis labels of a chart in the chart section of the .bqy (Interactive Reporting Studio) document. We don't find the existing properties fit our requirement.
    So, I request all the experts in "Interactive Reporting" to help us out as early as possible!
    Thanks,
    Natesh.

    Thanks for your reply.
    You're right, it shows the day data when I click on the month. Fine, but if it shows the daily data, why doesn't it show the date as well.
    As I tried to explain, the data are correct, but the labels are wrong or insufficient. Why do I have only 'Jun-2010' below the bar of a day?
    I investigated a little bit further and found that the behaviour changes depending on which month column out of the time dimension I choose.
    If I choose 'Month (MON-YYYY)' I get this label on the month chart and on the day chart (the drilled down chart), nothing more.
    But if I choose 'Month (YYYYMM)' from the same dimension in the month chart by changing the query in answers, I get an additional label in the day chart showing the day
    as YYYYMMDD.
    I need to influence this behaviour, but don't know how. I thought the drill down relationship comes from the Business Modell layer, but I don't see how to change things there.
    Any idea?
    Regards,
    Knut

Maybe you are looking for