Secondary Color Correction not working properly!

Hi,
when i apply RGB Curves and Three Way Color Correction (or any other color grading effect) and try to use the secondary color correction to limit my changes just to the skin tone for exemple, the effect don't respect the secondary sample and apply the effect to the entire clip. Most of the times i do a color grading and then  work on my skin tones separately, but i'm not able to in PR.
I'm using Premiere Pro CC 2014.1! I had the same problem with PP CC 2014 and the weird thing is that at my work this works normally.
First photo with the selection made, second photo showing the effect not respecting the mask.

It seems to be working here. Try toggling "Show Mask"

Similar Messages

  • Secondary color correction not working in Premiere CC

    Greetings,
    I'm unable to build secondary color correction masks in Three Way Color Corrector, RGB Curves etc in the current version of Premiere CC.
    In any of these plugins, when I check "show mask" I get the usual white slate filling the frame. But when I use the color picker to make a selection the whole frame stays white. It appears that I'm making selections but it's not building the mask for some reason. When making an extreme color change I can see that the mask is not building as it affects the whole frame.
    This started after upgrading to CC. I've recently updated to the most up to date version (yesterday) and am still having the same problem.
    Premiere CC 2014.1 Release
    8.1.0 (81) Build
    Macbook Pro Retina, 15" Late 2013
    2Gh Intel Core i7
    8Gb
    Intel Iris Pro 1536Mb
    Yosemite Version 10.10
    *note-my Colleague is not having this problem, he's working on the same OS and same CC build but he has an Imac. So I'm guessing this problem is unique to my hardware config.
    Anybody else have this problem or know of a fix?

    I have the same Problem new MAC OS Premier Pro CC or Premier Pro CS6 both have an issue with the Title Tool. If you open the title tool and try to make color changes or change size of the font it sticks at the default color and default font. SOmetimes the title tool will work and then when I exit it's back to the default first type location, default font and default color. Sometimes it will not even let me exit the Title Tool.
    Please help I have Projects I'm working on Deadlines and I pay a monthly Fee for Software that works and it's not working.
    Model Name:          Mac Pro
      Model Identifier:          MacPro5,1
      Processor Name:          6-Core Intel Xeon
      Processor Speed:          2.4 GHz
      Number of Processors:          2
      Total Number of Cores:          12
      L2 Cache (per Core):          256 KB
      L3 Cache (per Processor):          12 MB
      Memory:          16 GB
    Software  OS X 10.9 (13A603)
    Graphics  ATI Radeon HD 5770 1024 MB

  • Color correction not working properly with Vista?

    Hi,
    I am developing an AIR application for our camera club. It’s important that it will display corrected colors – consistent with colors displayed by Adobe Photoshop.
    The ActionScript code includes call to:
    stage.colorCorrection = ColorCorrection.ON;
    I have PC Vista. The main panel of the application displays thumbnails and can be scrolled down. When displayed first, the colors are not corrected. However while scrolling down the thumbnails, the colors are correct and identical to the ones displayed by Photoshop. These revert back to the uncorrected colors when stopping the scrolling.
    When double clicking on the thumbnail the full size image is displayed by PopUpManager. Its colors are correct – consistent with the Photoshop.
    Any idea what’s happening? Why are the colors flickering?
    I am using Flex 3 SDK, Flex 4 has the same issue.
    I have Flash Player 10. I color calibrated my monitor and have a valid ICC profile.
    Thanks for any help.

    It seems to be working here. Try toggling "Show Mask"

  • 'Blur' and 'Denoise' in Secondary Color Correction Not Working.

    Hi Guys,
    been trying to Denoise some of my footage in Speedgrade.
    I select an area of the screen (I can see it being chosen by checking the Gray-Out function), but adding Denoise and/or Blur doesn't change anything. When changing colors or luminance I can see the result.
    What am I doing wrong?
    Best,
    Fabian

    Those controls are applied to key mask only, produced by the Secondary, not the RGB image.

  • Pick color feature not working properly -- how do I reset?

    Pick color feature not working properly -- how do I reset?

    You need to contact Adobe for you billing problem this is a user four not adobe customer support.
    For your Photoshop Problems this user community may be helpful. 
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • PS CS5: select color range not working properly

    The color range is a grate command but it doesn't work properly when dragging the eye dropper across the image. This is especially noticeable with a low range value. When you start the selection (without pressing the shift key) and drag across the image only the end point is selected instead of the whole trace. Second, when dragging with the shift key pressed not the trace is added to the selection but a rectangular area. You can easily try this out by creating any one color image and lower the range value to about 5.
    In my opinion this is a bug or am I missing something?

    Hello,
    When you start the selection (without pressing the shift key) and drag across the image only the end point is selected instead of the whole trace.
    This behavior is as designed.  When you make a selection without holding the shift key, and you have the first eyedropper selected in the menu (the one that doesn't have a plus or minus sign) you are a making an initial selection on the image.  If you hold and drag this selection, it will just change the initial selection to match whatever destination you prefer on the image.
    Second, when dragging with the shift key pressed not the trace is added to the selection but a rectangular area.
    I can reproduce this behavior, too.  I believe this is also as designed, because the range is too small to make an organic looking selection.  I think the more standard workflow is to start with the range high (100%), make the selection of the localized color area you want to mask, and then reduce the range value as needed.
    Color Range isn't terribly intuitive to me, but it can be a powerful selection tool.  Photoshop Evangelist Russell Brown has a really good tutorial on Adobe TV about using color range.  Have you seen this before?
    http://tv.adobe.com/watch/the-russell-brown-show/the-secret-life-of-color-range/
    Hope this helps!

  • Color Dodge not working properly

    For some reason color dodge has never worked properly in my version of Illustrator. I'm using Illustrator CC 2014. I'm trying to do different lighting effects for a project for work and it just is NOT behaving like normal color dodged items. I go to the transparency drop down and change it to dodge but, the blacks don't fade into the background and the white turns to a solid. It should have the darks fade into the back color and the grays turn to color and the brightest white shine through.
    a screenshot. The rectangles are the backgrounds. The rounded things are the gradients set to color dodge.
    IT SHOULD LOOK LIKE THIS

    Oh my goodness. Thank you! That worked. I've been on the phone with an Adobe guy for an hour and a half. He kept on insisting it wasn't my document's settings but, I had a feeling it was, because other people's documents with that effect were working. Just not ones I created. I wonder why not a single tutorial I found mentioned that this effect might only worked in RGB?
    Is there a way to do it in CMYK? Does it work right for you when you do it in Illustrator? Does it only work in RGB?

  • Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Why does iMessages does not work properly ? Please help me ! Its works better with the previous version if compared with the latest iOS

    Many, many thanks for both of you Todd and Rick.
    to Rick:
    I suppose you mean the Color Settings in Project Settings as follows:
    - Working Space: None
    - Match Legacy ... Gamma Adjustments checked ON
    But it does not correct the colors in effects. And checking or unchecking Make Movie/Output Module Settings/Color Management/Profile/Preserve RGB does not make any difference.
    to both of you:
    Those parts of the video image that does not have color effects are just fine. In these parts the color is preserved when reimporting to FCP. However, those parts having color effects (except Levels, as decribed earlier) have altered color results. So, only the parts having effects affecting color are misinterpreted in the image area. The mismatch is of course seen in AE, before making the movie.
    What I ment with "Color Management not working properly" is that (instead of "disabling" it) Color Management does not seem to be able to correct this "misinterpretation" or difference in effect handling between AE 6 and 10.
    So, would you have any solution for this problem?
    Again, many thanks for your fast replies!

  • Secondary Color Correction layer not working in .look file

    I needed to edit an image for continuity reasons so I exported a .dpx frame from that section of my premiere pro project and worked on it in speedgrade.  In the workflow I have set for myself, it is best to apply the look in after effects using the "apply color lut" function.  Unfortunately, the secondary color correction layer does not apply, but other layers such as primary will. 

    Hi ACD,
    After Effects and Photoshop CS6 take .Looks via the LUT engine. That indeed allows for using primaries with low mid high differentiation and should yield really good results.
    Secondaries can be expressed in a LUT as well, but I would typically not recommend using them when you want to integrate .Looks with your After Effects workflow. Here's why:
    - a LUT is never as precise as you'd want it to be for something as complex as secondary color grading - a LUT is always based on interpolation (as opposed to applying the effect in SpeedGrade - there it's all native, no interpolation at all)
    - For a good key you would typically use the denoise and the blur function in the secondaries. Both (by nature) don't translate at all into a LUT, so you'd have to give up using these 2 important tools
    - For a lot of work you'd want the LUT to be accompanied by a mask. That's something that also can't be described in a LUT.
    Think of the LUT support for .Looks you created in SpeedGrade more as a really helpful tool for matching your comps to an overall look you design, not necessarily as the tool to apply a final grade.
    Hope this is helpful.
    Pat

  • (three-way color corrector) secondary color correction masks not working?

    Hi I'm using PP 2014 on Yosemite. Anyone notice (three-way color corrector) secondary color correction masks not working?

    strange. same stats here but im getting intermittent.... sometimes i can use the mask and the effect is only limited to the masked area. most of the time the masked area is ignored and the effect is applied to the whole image

  • MacBook Pro Trackpad Secondary Click not working properly - switching apps

    I have a MacBook Pro 15" (new Core 2 Duo) with 10.4.8. On my main account, when I try and use the trackpad's two-finger-click to perform the secondary click functionality, I have a problem where instead of showing the secondary menu (same as control-click) it instead shows me the application switch screen (same as you see when entering command-tab).
    I logged in under a new user account and enabled secondary click and it works properly -- so this appears to be either a conflict/issue in a plist (though I deleted the plist for mouse and keyboard and the issue still remains) or possibly with some other application/utility that is installed.
    Without recreating my world one-by-one, any thoughts, ideas, or suggestions?
    Thanks in advance,
    Brian
    MacBook Pro Core 2 Duo 15" 2.33 GHz   Mac OS X (10.4.8)   Using SOHO Notes, Yojimbo, StuffIt, and QuickSilver

    Update on the situation:
    1) Reboot in Safe Mode (shift-key down at start-up) -- secondary click still shows the application switcher.
    2) Ran Onyx -- Execute the defaults (no others) in the Automation tab and after rebooting the issue still persists.
    3) I removed the Microsoft drivers from my system and all plist files -- and reinstalled the MS drivers. On first use of the right-button on the mouse, I got the same "secondary click" response that I get with the trackpad. Before the uninstall it had worked correctly. I remember looking at the MS Mouse config options and it showed the right button performing a control-click. Now, with the preferences at their defaults from the software removal and reinstallation, I see there is an option -- and it is the default option, that the right-mouse button performs a "secondary click".
    So it isn't a trackpad or mouse issue, it is an issue that somehow the default system behavior for a secondary click has been changed from displaying the alternate menu to showing the application switcher.
    So the question is, what application or utility changed that? I was evaluating the Apple Mighty Mouse a few months ago and decided against it -- the right sensor seemed to fail often. Did that have an option to modify the secondary-click? I have Google and searched for tersm like ["secondary click" setting change modification hack, etc] and haven't seen any mention of that ability -- but clearly on my machine under my main user account, this is happening.
    I hope that helps get one step closer.
    Thanks in advance.
    MacBook Pro Core 2 Duo 15" 2.33 GHz   Mac OS X (10.4.8)  

  • After upgrading ios6 yahoo messenger not working properly and specially in video call colors appearance is very poor

    After upgrading ios6 on my iPad2 am not able to login at any yahoo account and gmail account and even yahoo messenger not working properly whenever I want to do vc it's takes too long to connect and even in video call the color appearance in cam is so poor and pic is blurry, please tell me what to do?

    Please reply me to solve my problem

  • The paint bucket tool is not working properly. The colors does not change, any suggestion?

    The paint bucket tool is not working properly. The colors does not change, any suggestion?

    Maybe on the wrong layer.
    It would be more beneficial if you capture your screen with the layers panel open and any layers that are collapsed, expand them.

  • Color Context does not work properly

    Hi,
    I'm using MII 12.1
    ColorContext does not work properly with Lights and Multilights. I did not test other grids.
    For every match it shows black colored lights.
    Is there a way to solve this problem?
    Thanks.

    Cemil,
    There was a bug in the early versions of 12.1 for color contexting.  Color context changes were made in the display template were not being saved.  I would strongly urge you to upgrade to SP5 patch 1.  However, if you want a very crude way to test if your contexting is working the way you want it to:
    1. Export your display template
    2. Find the color context section of the xml and change the settings to the desired color coding
    3. Import your modified display template
    4. Test
    I do not recommend this as a short term or long term solution.  It is a hack and should be recognized as such.  But it will allow to test your configured display template's behavior.
    Regards,
    Mike

  • My HD TV as NTSC Monitor for secondary color correction

    Can I use my new Panasonic HD TV model TH-42PX80U as a NTSC monitor for secondary color correction using both Final Cut Pro out of a Macbook Pro intel? What cable I can use to conect via HDMI? Will the color acuracy will be similar to that of a NTSC color correction monitor? will my TV do a decent job for NTSC? THANK YOU FOR YOUR HELP!
    I am not sure I have this HDMI cable to be use in my macbook pro does it comes with it?

    Can I use my new Panasonic HD TV model TH-42PX80U as a NTSC monitor for secondary color correction using both Final Cut Pro out of a Macbook Pro intel?
    Yes, but I would only trust it if you are going to be making DVDs, and ONLY if you properly set it up. I would not rely on it for broadcast color correction. The reason broadcast monitors exist is to have a standard...HDTVs don't have a standard. Go to best buy and look at all of them....none of them match. BUT, as a nice simple solution for DVD, I'd use it.
    But the only way you are going to get a signal to it is with the Matrox MXO. It will do component to the monitor, or you can get a DVI to HDMI adapter...if you do that the MXO software will allow you to set the monitor up to color bars. That option is only available from of the DVI out of the box.
    Will the color acuracy will be similar to that of a NTSC color correction monitor?
    No...it would be similar to color correcting NTSC on your home television...because that it what it is.
    will my TV do a decent job for NTSC?
    I doubt it. Taking an SD image and blowing it up huge on this HD TV...scaled up. I wouldn't think so. I wouldn't use it for SD color correction.
    I am not sure I have this HDMI cable to be use in my macbook pro does it comes with it?
    You have a DVI port on your MacBook Pro. And they make DVI to HDMI cable adapters I'm sure.
    http://library.creativecow.net/articles/ross_shane/MXO.php
    Shane

Maybe you are looking for